Performance on Oracle 10g x64 and ECC5.0 (640 x64) on Windows 2003 R2 x64

Hello all,
We have a serious problem with this landscape. SAP kernel updated to 155. Oracle updated with OPatch to patch 12 (latest) and the new database statistics were updated. It seems an IO degradation because the Average Disk Queue is very high. We tested the hardware and it performs very well compared to other solutions. In the mean time we talked to the support from SAP and they didn't find any problems on configuration of parameters and recomended to turn off AUTO_SPACE_ADVISOR_JOB in Oracle, but the performance is still low. Does anyone tested/implemented these versions together?
Best Regards,
Emanuel

If no configuration problem is found even after getting SAP involved, I suggest you re-examine the hardware.
Poor I/O performance is often indication of I/O hardware problem. In the case on Windows platform, please check Windows event log. If you find ANY 'Event ID 9' or Event ID 11' errors, you can almost certain to conclude disk/disk-controller is defective. Please note that Windows does NOT alway write such message when I/O problem occurs.
I find that I/O problem is more common on Windows platform because Windows servers often have less hardware diagnostic features and less direct support from manufactures.

Similar Messages

I need to download Oracle 10g Client (10.2.0.4) for Window 2003 64bit

I need to down load Oracle Database 10g Client Release 2 (10.2.0.4) for Windows 2003 64bit server I found the 10.2.0.1 but can't find the 10.2.0.4 download.

Hi,
Here is the link.
Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
For 32-bit OS, you can get the software from:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
All the database software can be downloaded from:
Oracle Database Software Downloads
http://www.oracle.com/technology/software/products/database/index.html
Regards,
Hussein

Enable oracle 10g on windows 2003 R2 X64 edition to address 8 Gb memory

We are using Oracle 10g R2 on Windows 2003 R2 x64 Standart edition. Lately we upgraded the system memory from 4 Gb to 8 Gb. Windows sees the memory as is (8 Gb) But oracle can not see the RAM as 8 gb. How can we ovecome this problem.
Best Regards,
Murat CAKIR

What you can effectively do is since your are using 10gR2, you can use the spfile. Increase the SGA_MAX_SIZE and SGA_TARGET (if you want to give the control to the Oracle itself) in the spfile and bounce the database.
alter system set SGA_MAX_SIZE = 6G scope=spfile;
alter system set SGA_TARGET = 6G scope=spfile;
shutdown immediate;
startup;
show parameter sga;6G could be changed according to what sort of applications that allocates the operating system RAM, you have already got on your operating system.
Hope That Helps.
Ogan

Oracle 10g XE and Oracle 8.1

HI,
I am new in oracle and I installed both Oracle 10g XE and after Oracle 8.17 Standard with Apache server. Does anybody know why Oracle 10g XE doesn't start (doesn't find APEX) when Oracle 8.17 is running on the same computer?
Tks,
Laurentiu

You can not use XE parallel with another Oracle instance. Only one instance per network.
Cheers!

Error to connect oracle 10g client and designer BO 4.0

hello,
I try to connect oracle 10g client and designer BO 4.0.
I created an ODBC connection to function in the administration tools of data sources but I can not connect once in designer.
I tried using the driver directly oracle designer 10 but I have the same error that is this:
DBD: ORA-12154: TNS: connection identifier specified could not be resolved
someone there had the same concerns?
cordially

Hi,
so it looks like that your TNSNAMES.ORA file isn`t properly configured. Thats why you can connect with the IDT to your Oracle Database.
Your DBA`s should sent you the correct TNSNAMES.ORA file or the entry for your DB prior. After the tnsping works, you will be able to use the IDT properly.
Regards
-Seb.

Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

Introduction
Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
Things i found and learned
Oracle
1. I have download Oracle 10g XE and installed in my windows vista sp2.
2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
3. I also edit TNSNAMES to following below:
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
4. My sqlnet like following below:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
5.I have try tnsping OraDB and its works.
6. I monitoring task manager and OracleServicesXE is running.
7. ora_dba is added in Group.
Problem in SQLPLUS
When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
i . In cmd i type sqlplus and enter then i been ask for username and password.
ii. After i insert my username and password and enter then i get the error of ORA-12560.
Visual Basic 2010
1. First i created my project, drawing label and button for test connection.
2. Then, i add reference Oracle.DataAccess into my project.
3. I type following script into my vb form:
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class Logon
Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
Dim conn As New OracleConnection(oradb)
conn.Open()
Dim cmd As New OracleCommand
cmd.Connection = conn
cmd.CommandText = "select SName from Staff where SName = shin"
cmd.CommandType = CommandType.Text
Dim dr As OracleDataReader = cmd.ExecuteReader()
dr.Read()
lblOra.Text = dr.Item("SName")
conn.Dispose()
End Sub
End Class
Problem in VB2010
When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
Extra Question*
1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
Edited by: user9173084 on Jul 19, 2010 3:34 AM

Huhu..
Yo, henry
I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
Here is my lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 state:ready
DISPATCHER <machine: SHIN-PC, pid: 1932>
(ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "xe" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
Actually there is somethings as a newbie i wondering long time alreadly ><
1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
Also please check at my TNSNAME.ORA:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I got the feeling there is so close~~~!!!

Installing Oracle 10g Forms and Reports in Cluster Mode

Dear All,
My OS version is RHEL 4
In our current setup we have oracle 10g database two node cluster and Application Server 10g to node cluster.
Currently our report server has been configured to run in standalone mode
I have been asked to configure oracle 10g forms and report server in cluster mode.
Please provide me with the documentation link to configure oracle 10g reports server in cluster mode.
Thanks and Regards
Monoj Das

my main goal is load balancing only
Then what I've done in 2007 might be what you need. In that thread there is a link to Web Cache Administrator's Guide : there you'll find everything you need to configure the web cache as a load balancer, particularly chapter 8 Setup and Configuration.
Anyway, here briefly some configurations : we have two machines, say MachineA and MachineB. The DNS resolves MachineA to a virtual address, which is normally assigned to MachineA; if MachineA crashes, it gets assigned to MachineB.
Users URL looks like this : http://MachineA:<port>/forms/frmservlet?config=<some config>
MachineA's web cache distributes connection requests between MachineA and MachineB.
Of course we're now using 11g as well, but that's another thing.

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Slow first connection using Oracle 10g xe and Visual Studio 2008

{noformat}
Good day,
I'm slightly unaccustomed to using forums, so bear with me.
My initial connection to the Oracle database takes approximately 30 seconds. It seems to be waiting for a connection before timing out and trying another connection which works, as all subsequent connections work immediately. I'm unsure how other people's responses in forums can help me due to the plethora of configurations, so here's mine. My comprehension of the oracle world is still growing, you'll have to explain the terms you're using for me, Hoping you can help.
I'm using Visual Studio 2008, set to use 32 bit debug mode, on a Windows 7 Pro platform. Also using Oracle 10g Xe, and have installed the 32 bit version of ODAC 11.2 (11.2.0.1) to aid making a connection from Visual Studio to Oracle.
I have a database set up and a user with system admin rights. This is all local for a programming project and will never see the light of day outside of my personal machine.
I am using code to connect, not the GUI. I wish to code this project completely without the aid of the GUI. so my connection string within Visual Studio C# is (pw/id hidden)...
string xe = "Data Source=xe;User Id=xxxxx;Password=xxxxx;";
OracleConnection conn = new OracleConnection(xe);
My c:\devsuitehome\network\admin\sqlnet.ora file is this:
# sqlnet.ora Network Configuration File: C:\DevSuiteHome\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)
And my c:\devsuitehome\network\admin\TNSNames.ora file is this:
tnsnames.ora Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
Generated by Oracle configuration tools.
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = xe)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = <machine name)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
Just for good measure, my tnsping xe shows:
"Used paramter files:<br/>
c:\devsuitehome\network\admin\sqlnet.ora<br/><br/>
Used TNSNAMES adapter to resolve the alias<br/>
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521)))(CONNECT_DATA = (SERVICE_NAME = xe)))
OK (0 msec)"
So, how can I make that initial connection faster so I don't spend 15 years testing my application due to slow start-ups? :)
Thank you.
Kevin.
{noformat}
Edited by: 832285 on Jan 29, 2011 10:08 AM
Edited by: 832285 on Jan 29, 2011 10:10 AM

I have formatted my hard drive since my first post. I was running window 64 bit with a higher version of the ODAC and that proved to crash my machine with faulty error messages about memory. I have reverted to a previous version of the ODAC tools and everything works very smooth now. Still the connection time is consistently 20 seconds or longer on the first attempt.
Just a little more information.. I am currently taking a college course with 15 other students, as you can tell by the impersonal machine name, where programming using visual studio 2008, and Oracle 10g xe is expected. All of us are using a 64 bit environment and we all have difficulties cutting down the load time of making the first connection to Oracle. Some people are longer making the connection, but none are shorter.
One other note. After the first connection is made, taking 20 or more seconds, and is closed, all subsequent openings of the connection are instantaneous, for all of us.
If there is ANYTHING more I can get for you, please let me know. With my environment stable as it is, I will not need to format or change any information for the foreseeable future.
Here is the information you requested
1 The connection method I am using, I have chosen the manual connection for you, however the delay exists if the connection is made through the GUI as well.
Historically, I am getting slow connection speeds through adding the connection through the GUI or by a manual connection. Here is how I am doing it manually. I have the connection being created in 20 seconds, which is the best I can get.
Imports Oracle.DataAccess.Client
Also included project reference: oracle.dataaccess / version 2.111.6.20
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Dim connString As String = "Data Source=XE;User Id=abc;Password=abc;"
        Dim con As OracleConnection = New OracleConnection()
        con.ConnectionString = connString
        Try
            con.Open()
            MessageBox.Show("Connected!")
            con.Close()
            con.Dispose()
        Catch ex As Exception
            MessageBox.Show(ex.Message)
        End Try
    End SubMy current TNS Ping results
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-FEB-2011 01:02:36
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (0 msec)2 Connection to SQL plus is instantaneous.
I fought for weeks about the ODAC version 11.2.0.1 that you see in the previous post, and that would be a whole new thread. Suffice it to say I have a reliable environment to program in with this 10.2.0.1.0 version that I am running now, and the connection time has not changed, it is still minimum 20 seconds load time, sometimes up to 25.
3 Ram usage in my typical environment
I am running this laptop with 4 gigs of ram. This is a typical environment I would be running my application in.
Physical memory
total 4090
cached 1753
available 2345
free 656
system
handles 27141
threads 911
processes 70
commit megs 2860/8179
kernel memory megs
paged 201
nonpaged 52
4 I formatted my machine and reinstalled the Windows 7 professional operating system as of a few nights ago. The Oracle software on my machine is
Oracle Database 10g express edition
ODAC 11.1.0
I amm not sure what filename you would need in addition to the product names that I have installed.
5 The information from the SET command is
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\stepheke\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=STEKEV0908
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\stepheke
LOCALAPPDATA=C:\Users\stepheke\AppData\Local
LOGONSERVER=\\STEKEV0908
NUMBER_OF_PROCESSORS=2
oracle_sid=xe
OS=Windows_NT
Path=C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Oracleapp\stepheke\product\11.1.0\client_1;C:\Oracleapp\stepheke\product\11.1.0\client_1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Windows Live\Shared
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\stepheke\AppData\Local\Temp
TMP=C:\Users\stepheke\AppData\Local\Temp
USERDOMAIN=stekev0908
USERNAME=stepheke
USERPROFILE=C:\Users\stepheke
VS90COMNTOOLS=c:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
windir=C:\Windows

Difference between oracle 10g R1 and R2

hi,
I would like to know is there are any difference betweeen oracle 10g R1 and R2. I am using forall condition in a select statement. The query is runnign fine in R2 and not in R1.
Kinldy update.
Rgds....

user537350 wrote:
hi,
I would like to know is there are any difference betweeen oracle 10g R1 and R2. I am using forall condition in a select statement. The query is runnign fine in R2 and not in R1. One of the differences is that R1 is obsolete and no longer supported.
Other than that, there are about 2 years of software changes between the .1 of each release. According to http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/whatsnew.htm#sthref37 there was some work done in forall in R1, so they probably got it right by R2.
Can I assume you have an unpatched R1?

Singl/Multiple Server Oracle 10g DB and AS- Advantages and DisAdvantages

Hi Friends,
I am using Application1 using Oracle 10g Application Server and Oracle 10g database.
Now i planned to use Application2 using Oracle 10g AS and Oracle 10g DB
I need to know what will be the Advantages and Disadvantages if i have the schema for Application2 in the existing Oracle 10g DB / having it in another Oracle 10g DB Server
sameway what will be the advantages and disadvantages if i have the Application2 regsiterd in existing Oracle 10g AS(Multiple OC4J Instance) / having it in another Oracle 10g AS Server.
Regards

To start the list, for me some of the advantages are:
Same DB:
- less overhead and wasted CPU Cycles (therefore potentially lower license fees)
- easier maintenance (backup, recovery)
- easier tuning (fewer conflicting external environments asking for same resources)
- Oracle is designed for this, allows use of Resource Manager
- technically RAC is a clustered 'same DB'
Same AS:
- less overhead and wasted CPU Cycles (therefore potentially lower license fees)
- easier maintenance (backup, recovery)
- easier tuning (fewer conflicting external environments asking for same resources)
- Oracle is designed for this, use AS clustering
Different DB:
- separate maintenance (patch, upgrade) cycles for different SLA
- easier tuning (isolate tuning to one app)
- easier security (most developers have no idea about Oracle security and make merge impossible)
Different AS:
- separate maintenance (patch, upgrade) cycles for different SLA
- easier tuning (isolate tuning to one app)
- easier security (most developers have no idea about security)

Oracle 10g discoverer and report services installation issue

Hi
Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
at configuration assistants the opmn configuration failed..
could some one suggest the possible solution for this problem.
thanks

at configuration assistants the opmn configuration failed..additional clues may exist within log file.
Edited by: sb92075 on Aug 29, 2010 7:19 PM

Oracle 10g ASM and RAC configuration

Hi all,
I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
Our materials are bellow:
Hardware: RP 3440 (HP)
OS : HPUX 11i Ver 1
Storage: EVA 4000 (eva disk group)
The problem is:
Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
But we want to use Oracekl Clusterware + RAC + ASM
My question is if anybody know what is the best configuration, we want to use ASm.
Can HP serviguard use ASM.
Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
Thanks for your help.
Regards.
raitsarevo

Hi,
I want to use RAC for clustering. My shared disk is a NetApp Filer FS250 that can only be mounted throught NFS. RAW devices have to be excluded, alsi OCFS i think works similar to raw devices and need to see phisical disk to create partition. ASM instead can work on an NFS mount?
Ste
Visit http://www.stefanocislaghi.it/

Oracle 10g backup and recovery

Hi
Can you guys give me some resource of oracle 10g backup and recovery. I want to learn about oracle 10g backup+recovery. Plz help

Best resource is Backup and Recovery guide from Oracle document site.
Backup and Recovery Advanced User's Guide
http://download-west.oracle.com/docs/cd/B19306_01/backup.102/b14191/toc.htm

Connect Oracle 10G XE and Oracle 9.2i Simultaneously from same machine

Hello,
How to Connect Oracle 10G XE and Oracle 9.2i Simultaneously from same machine using .Net Application.
I have one application which is in .net, i want to connect it with oracle 10g XE and oracle 9.2i Simultaneously.
it always connect only one database which is first in environment variable (path).
please reply.

Use SQL*Net or JDBC Connections. Looks like you are connecting using the Bequeathed connections
Christopher Soza
Oracle BI DBA

DPM 2012 R2 agent update on Windows 2003 server x64

Hi,
I have an old windows 2003 server x64 protected by DPM 2012 Sp1. After DPM upgrade to 2012 R2 I cannot update DPM Agent on server. If I try to update agent manually error message is : agentsetup.exe is not a valid win32 application.
Mihai

command back,
edit: it seems like a reboot is definitely needed to get it working
got it working like described here: http://support.microsoft.com/kb/2958100/en-us
Install the Microsoft Visual C++ 2008 Redistributable on Windows Server 2003 servers if it is not already installed.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
Microsoft Visual C++ 2008 Redistributable Package (x64)
Note The following error occurs if the C++ redistributable is not installed:
Data Protection Manager Setup
Could not load the setup launch screen. Please contact Microsoft Product Support.
Copy the Windows Server 2003 Agent installer that is located on in the DPM server to the Windows Server 2003 server, and then install the agent.
64-bit: <var>DPM Installation Location</var>\DPM\agents\RA\4.2.1226.0\amd64\1033\DPMAgentInstaller_Win2K3_AMD64.exe
32-bit: <var>DPM Installation Location</var>\DPM\agents\RA\4.2.1226.0\i386\1033\
DPMAgentInstaller_Win2K3_i386.exe
Run the following command at an administrative command prompt:
cd DPM Agent Installation Location\DPM\bin\setdpmserver.exe –dpmservername DPM Server Name
Run the following Windows Powershell cmdlet to establish a connection with the DPM server:
Attach-ProductionServer.ps1 DPMServerNameProductionServerNameUserNamePasswordDomain
regards
Stefan

Performance on Oracle 10g x64 and ECC5.0 (640 x64) on Windows 2003 R2 x64

Similar Messages

Maybe you are looking for