Performance point service errors in share point wfe servers event viewer

HI
i am facing a problem in performance point service , i seen two errors  in event viewer of a sharepoint wfe server
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue: 
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display. 
Error code "Services PerformancePoint" is 20700.
2 error)
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          02/09/35 01:11:41 م
Event ID:      39
Task Category: PerformancePoint Services
Level:         Error
Keywords:     
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller.  This may indicate the HttpRuntime executionTimeout for the Web Application is configured to
a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>39</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-29T10:11:41.385108100Z" />
    <EventRecordID>1422377</EventRecordID>
    <Correlation ActivityID="{D707EAF7-6A6A-45FA-AF83-77DC3231B658}" />
    <Execution ProcessID="18236" ThreadID="19172" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
  </System>
  <EventData>
  </EventData>
</Event>
adil

Hi
also  below error is coming in eventy viewer of wfe servers
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          03/09/35 02:25:26
م
Event ID:      39
Task Category: PerformancePoint Services
Level:         Error
Keywords:     
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller.  This may indicate the HttpRuntime executionTimeout for the Web Application is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>39</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-30T11:25:26.997772700Z" />
    <EventRecordID>1425270</EventRecordID>
    <Correlation ActivityID="{EB0C99EA-5B6A-4001-9D9B-C91FF779CD4B}" />
    <Execution ProcessID="6736" ThreadID="15788" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
  </System>
  <EventData>
  </EventData>
</Event>
adil

Similar Messages

  • Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!

    Hi, 
    Help, please.
    Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!
    Acording to these entries:
    http://blogs.technet.com/b/sbs/archive/2011/08/19/two-commands-you-should-always-run-first-when-troubleshooting-companyweb.aspx
    https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2Fwww.techtask.com%2Fsharepoint2010%2Ffehlermeldungen-nach-sharepoint-2010-service-pack-1-installation%2F
    In order to fix this, I need to run:
    PSConfig.exe -cmd upgrade b2b -force -inplace -cmd application content -install -cmd install features
    But SP doesn’t recognize “b2b”.  is the the content or config db?
    Thanks in advanced

    Your Syntax is bad. b2b should follow -inplace, it doesn't make sense anywhere else in the command. Have a look here for more detail:
    https://technet.microsoft.com/en-us/library/cc263093%28v=office.14%29.aspx?f=255&MSPPError=-2147217396

  • Performance point services error

    We are trying to configure performance point services in our environment.
    We have successfully setup the secure store service and after that performance point service but still if we browse the site and start the dashboard designer, we are getting below error:
    "an error has occurred attempting to contact the specified sharepoint site dashboard designer"
    We have configured our web application with classic mode authentication. Do we need claims based authentication for this?
    Thanks in advance.

    Hope you followed below steps properly
    http://www.dotnetcurry.com/showarticle.aspx?ID=650
    Also check if below helps
    http://blogs.msdn.com/b/mcsukbi/archive/2011/11/26/bi-service-applications-in-sharepoint-2010-authentication-classic-vs-claims-and-identity-delegation-kerberos-part-5.aspx

  • OOB Enrollment Point service error

    We're beginning to migrate our SCCM 2007 clients to our new SCCM 2012 site. We're also getting new replacement systems that have AMT 7x on them. We realize we won't be able to provision the new systems until SCCM 2012 SP1 and that's not a problem.
    Looking at the amtopmgr.log we're seeing some errors we'd like to sort out in the meantime.
    ERROR: [EnrollmentWrapper]: Communicate to Enrollment service error. The service URL is
    https://SCCMServer.domain.com:443/EnrollmentService/AmtEnrollmentService.svc. Please check: 1. The service URL is correct and accessible. 2. Windows Communication Foundation (WCF) Activation is installed on the OOB service point and Enrollment points. 3.
    The OOB service point and the Enrollment point are mutual trusted, means each Site System Identification certificate is swapped to other's trusted people store.
    I tried browsing to the url to see if I could run the web service but it's not showing anything. Is there another way to find out what might be causing this error?
    Orange County District Attorney

    Any joy with this, Sandy? I am having the same output in amtopmgr.log
    I'm using PKI certs from an internal CA and have a feeling it might be related to this as the log shows the following:
    [EnrollmentWrapper]: SCCMCertCredentials - finding self signed sms cert by thumbprint~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:56.626-60><thread=6336 (0x18C0)>
    [EnrollmentWrapper]: FindCertificate - finding in LocalMachine, store Sms, find type FindByThumbprint, validOnly = False~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:56.632-60><thread=6336 (0x18C0)>
    [EnrollmentWrapper]: FindCertificate - there are 7 certs in the specified store~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:56.633-60><thread=6336 (0x18C0)>
    [EnrollmentWrapper]: FindCertificate - Found certs via FindByThumbprint, count = 1~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:56.634-60><thread=6336 (0x18C0)>
    [EnrollmentWrapper]: FindCertificate - cert[0].FriendlyName = Site System Identification Certificate~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:56.634-60><thread=6336 (0x18C0)>
    [EnrollmentWrapper]: FindCertificate - cert[0].Subject = CN=Site System Identification~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:56.634-60><thread=6336 (0x18C0)>
    [EnrollmentWrapper]: FindCertificate - cert[0].Issuer = CN=Site System Identification~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:56.635-60><thread=6336 (0x18C0)>
    ERROR: [EnrollmentWrapper]: Communicate to Enrollment service error. The service URL is https://SCCMserver.domain.com:443/EnrollmentService/AmtEnrollmentService.svc. Please check: 1. The service URL is correct and accessible. 2. Windows Communication Foundation
    (WCF) Activation is installed on the OOB service point and Enrollment points. 3. The OOB service point and the Enrollment point are mutual trusted, means each Site System Identification certificate is swapped to other's trusted people store.~~  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012
    11:04:57.712-60><thread=6336 (0x18C0)>
    Error: Enroll AMT device failed  $$<SMS_AMT_OPERATION_MANAGER><08-16-2012 11:04:57.821-60><thread=6336 (0x18C0)>

  • Move dashboards from perfomance point server 2007 to share point 2013

     Hello every one,
    can you please help me in the below.
    I have to move the reports and dash boards from old to new share point (2013) site. There is already a share point site built and running successfully. I need to add 1 section of dash boards and reports into sharepoint 2013 from the old site.
    For this I need to add new sub site site rite? My question here is how to bring dash boards and reports from old site to new site (share point 2013).
    Old site is performance point server 2007 and new site is share point 2013.
    Thanks
    Kumar

    Given you aren't using PowerPivot for SharePoint, you can continue using SSAS 2008 R2 for your cubes and data connections. BI dashboards, Lists, and so forth are just SharePoint content, and they get upgraded when you migrate to 2013.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to get annotations from Performance Point Scorecard out from Share Point database

    Hi,
    I have a requirement to put the annotations from a Performance Point Scorecard on a reporting services report.
    I see where the Annotations are in the database, but I don't see out to get the Guid or ID associated to the Scorecard name.
    Can someone provide the relationship for the tables?
    David Botzenhart

    Hi,
    I have a requirement to put the annotations from a Performance Point Scorecard on a reporting services report.
    I see where the Annotations are in the database, but I don't see out to get the Guid or ID associated to the Scorecard name.
    Can someone provide the relationship for the tables?
    David Botzenhart

  • Is it possible to debug step by step for share point designer workflow in share point 2010

    Hi all,<o:p></o:p>
    I have created a reminder date work flow but it is not working .In this work flow it need to be check first its status if its status is suspend then only workflow can run .I am
    attaching below workflow logic check if any modifications needed please suggest me . And  I have doubt is it possible to check step by step debugging like in coding we are using break point in this way any break point is available for designer workflows
    ? If break point is available please guide me how to get and use those<o:p></o:p>
    Thanking you,<o:p></o:p>
    ArunDarly 
    <o:p>Workflow logic given below</o:p>

    You can't step through a SharePoint Designer Workflow.  The normal workaround is to Log messages to the History list with the values you want to look at where you would normally put breakpoints.  Then run the workflow and examine the history
    list to see how the values changed as you went through your workflow.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?

    HI
    In Sharepoint 2013 BI solutions using Performance point services  is can be compatible with Analysis server 2008 R2?
    here in sp 2013 i upgraded sp 2010 BI site and when i open dashboard pages they not display the pointers.
    and when i open dashboard designer i was unable to connect Analysis server 2008 R2 where data source exists
    adil

    Hi 
    1) here i migrated a Publishing web applications and bi sites to 2013 sucessfully, this site is enable anonymous access 
    2) Installed SQLSERVER2008_ASADOMD10 
    3) added performance point service application pool account as a db_owner and data read access permission to content database and added permission to unattended service account to SSAS server .
    3) and after i was able to connect to SSAS data soruces.
    here when i open dashboards with administrator user  , this user able to view dashboards
    but when external user able to view dashboards it asking authentication and throws error.
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-PerformancePoint Service
    Date:          3/15/2015 11:59:02 AM
    Event ID:      1101
    Task Category: PerformancePoint Services
    Level:         Error
    Keywords:      
    User:          NT AUTHORITY\IUSR
    Computer:      TSharepint2013.test.com
    Description:
    An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this
     problem:
    Microsoft.PerformancePoint.Scorecards.BpmException:
     The scorecard no longer exists or you do not have permission to view it.
    PerformancePoint Services error code 20700.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
        <EventID>1101</EventID>
        <Version>15</Version>
        <Level>2</Level>
        <Task>1</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2015-03-15T08:59:02.151586300Z" />
        <EventRecordID>149327</EventRecordID>
        <Correlation ActivityID="{54EDF29C-9842-C025-E404-2869814A5DF0}" />
        <Execution ProcessID="8120" ThreadID="7816" />
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security UserID="S-1-5-17" />
      </System>
      <EventData>
        <Data Name="string1">An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
    Microsoft.PerformancePoint.Scorecards.BpmException: 
    The scorecard no longer exists or you do not have permission to view it.
    PerformancePoint Services error code 20700.</Data>
      </EventData>
    </Event>
    adil

  • How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

    Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
    In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with  Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
    to Public URL = "proxy URL".
    In Host Named Site Collections,  alternate access mappings  are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
    URL is associated.  This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
    point HNSC to respond  to a different URL(proxy URL). Consequently, Share Point URLs are exposed to  external users.
    Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If  hiding the internal Share Point URLS is a requirement,
    it suggests to use a web application instead of host named site collections.
    Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
    http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
    Excerpt from above article-
    "Host Named Site Collections Only Use One Host Name
    Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
    are always considered to be in the Default zone.  This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
    as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
    calls to the same URL.  If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

    Hi Satish,
    You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
    It is by design that each host-name site collection only support one URL for each zone.
    The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
    https://support.microsoft.com/en-us/kb/2826457
    So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
    Best regards.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Different passwords for different share points on 1 server?

    On a lion server I have two share points.
    A 'general' is accessible for all users, a 'confidential' is for a select group of users.
    The permissions are set and the select group have their server access password in their key chain.
    The server password is stored in a separate key chain ie. not in the login key chain.
    The select users connect to the server and allways mount the 'general' share point.
    The 'confidential' share point is mounted only when needed and unmounted afterward.
    Problem is when the users walk away from their computer and forget to lock the computer or to completely disconnect from the server, which is generally very inconvenient because of open documents.
    "Unmounting" the confidential share in my setup is not really putting it away securely because at that moment, anyone can sit down at that computer and mount 'confidential' because the login credentials were already given when mounting 'general'.
    Is there any way, lest having Parallels running another Lion server that shares the 'confidential' mount point, to force users to enter a password before 'confidential' can be mounted WHILE 'general'  IS ALREADY MOUNTED?
    In other words, can credential exchange be tied to share point mounting time rather than to server connection time and thus be different for different shares and allow for share-specific unmounting, effectively locking it away?

    Has nobody done this before?

  • What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center?

    I need some clarifications.
    What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center? How each them are related in collaboration system?
    Is Share point server 2013 and Share pointer Designer 2013 available in 32bit version? If not, then how to use it in 32 bit machine by using any VMs?
    Thanks
    Senthil

    SharePoint Server 2013:
    http://office.microsoft.com/en-us/microsoft-sharepoint-collaboration-software-FX103479517.aspx
    SharePoint Designer 2013:
    Designer is used to develop SharePoint pages using HTML/CSS/JS as well as SharePoint Designer Workflows
    Yammer: 
    https://about.yammer.com/
    Windows Server is Windows, but the Server OS. SharePoint runs on top of supported Windows Servers editions (see http://technet.microsoft.com/en-us/library/cc262485.aspx).
    SharePoint Server is 64-bit only (trial:
    http://technet.microsoft.com/en-us/evalcenter/hh973397.aspx), although Designer does have a 32-bit edition (full product:
    http://www.microsoft.com/en-us/download/details.aspx?id=35491).
    You will need the capability to run 64bit VMs. Minimum recommended all-in-one VM for SharePoint is to allocate 24GB of RAM, but you can get away with as little as 12GB (I wouldn't go below that). Because of this, it generally rules out 32bit OSes as a virtual
    machine host.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Windows is Scanning and repairing drive... (- Errors in Event Viewer)

    Long post, please be patient... :)
    I have a fairly new (purchased 8/2013) Lenovo ThinkPad T431s with Windows 8.1 Pro 64-bit (updated from 8.0 -> 8.1). It has a very tricky error coming basically 8 / 10 boots:
    Windows is Scanning and repairing drive...
    Error details from Windows Event Viewer (a new similar error appears on every boot to event viewer):
    A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
    A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference
    number of the file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
    What has been done 1st trying to fix that:
    SSD disk has been changed (image from previous SSD copied back) ->
    no solution, error remains
    chkdsk /F /R -> no solution, error remains
    SFC /scannow -> no solution, error remains
    dism /online /cleanup-image /restorehealth -> no solution, error remains after a few boots
    TRIED using Windows 8.1 "Update & Recovery -> Refresh Your PC without affecting your files" -> Inserted the Lenovo "Operating System Recovery Disk Windows 8 Pro (OEM Activation 3.0 Required)" BUT Windows did not accept
    that DVD claiming "The media inserted is not valid"... ???
    Ended up calling Lenovo Support and they instructed me to order the Recovery DVD from
    Lenovorecovery.com -> Unfortunatelly Windows does not recognice the DVD(s)...
    mountvol returns:
    \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3}\
    (This is my C:\ drive where Windows installation resides)
    \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7}\
    *** NO MOUNT POINTS ***
    \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\
    *** NO MOUNT POINTS ***
    \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897}\
    *** NO MOUNT POINTS ***
    Then running fsutil dirty query on each returns:
    Volume - \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3} is NOT Dirty
    Volume - \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7} is NOT Dirty
    Volume - \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} is Dirty
    Volume - \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897} is NOT Dirty
    The chkdsk on the dirty volume
    \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\ returned:
    The type of the file system is NTFS.
    Insufficient storage available to create either the shadow copy storage file or
    other shadow copy data.
    A snapshot error occured while scanning this drive. Run an offline scan and fix.
    Diskpart output on the same volume:
    DISKPART> lis par
    Partition ### Type Size Offset
    Partition 1 Reserved 128 MB 17 KB
    Partition 2 Recovery 1000 MB 129 MB
    Partition 3 System 260 MB 1129 MB
    Partition 4 Primary 146 GB 1389 MB
    Partition 5 Recovery 350 MB 147 GB
    Partition 6 Recovery 19 GB 148 GB
    Questions:
    1) Are my Partitions OK, haven't "touched" anything?
    2) Excluded the dirty volume from boot checking with chkntfs /x
    -> still the Error appears in Event viewer log (but Scanning is skipped/not shown anymore during the boot).
    What is causing the error?
    3) Why do I have three (3) recovery partitions?

    What has happened in the past days:
    A) Lenovo on-site-Support changed the motherboard -> had no impact on the error (which I expected).
    B) I found
    instructions how to manually create USB Flash stick with a booting Custom (OEM) Recovery Image.
    C) Booted with USB and performed "Refresh your PC without affecting your files."
    D) Windows was refreshed but...
    -->>
    Still the error remains (Windows scanning and repairing drive \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} on each and every boot.
    1) Related Error in Event viewer (NTFS):
    A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
    A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference number of the
    file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
    2) Related Error in Event viewer (NTFS - Microsoft Windows NTFS):
    Volume \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5) needs to be taken offline to perform a Full Chkdsk.  Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via
    PowerShell.
    -->>
    Now Lenovo support is proposing a full re-install (to be performed by myself) of Windows as this is SW issue.
    Summary:
    - Refreshing my T431s with OEM Image does not help
    - The error remains on \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5; Lenovo Recovery partition) OR at least Windows thinks so...

  • UCCX 7.0 Errors on Event Viewer

    Hi Team.
    The customer was alerting us about errors that are showing in the Event Viewer UCCX 7.0 server (on Windows).
    The errors in Event Viewer are:
    Event Type: Error
    Event Source: CSAgent
    Event Category: Kernel Rule
    Event ID: 256
    Date:  3/13/2013
    Time:  1:22:12 PM
    User:  N/A
    Computer: UCCX02-SS-CRT1
    Description:
    The process 'C:\Program Files\Java\jre6\bin\jusched.exe' (as user UCCX02-SS-CRT1\Administrator) attempted to initiate a connection as a client on TCP port 80 to 137.254.16.112 using interface Wired\HP NC7782 Gigabit Server Adapter. The operation was denied.
    ===================================================================================
    Event Type: Warning
    Event Source: Storage Agents
    Event Category: Events
    Event ID: 1210
    Date:  3/13/2013
    Time:  1:17:32 PM
    User:  N/A
    Computer: UCCX02-SS-CRT1
    Description:
    Drive Array Tape Drive Cleaning Required.  The tape drive in Slot 0, SCSI bus 2, SCSI target 5 requires cleaning.
    [SNMP TRAP: 3044 in CPQIDA.MIB]
    ===================================================================================
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:20:58 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2005 Network communication error (TRANSIENT).
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:20:58 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:21:08 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2005 Network communication error (TRANSIENT).
    ===================================================================================
    Event Type:    Error
    Event Source:    CTIStorageServer
    Event Category:    None
    Event ID:    4
    Date:        3/21/2013
    Time:        3:21:08 PM
    User:        N/A
    Computer:    UCCX01-SS-CRT1
    Description:
    FCCC2015 The connection to the Desktop Chat Service has been lost. The program will attempt to reconnect automatically.
    ===================================================================================
    These last four errors were shown and generated intermittent communication between the telephony server (CallManager) and the IPCC because all active calls were interrupted.
    I searched online documentation but can not get anything to tell me the meaning of these errors, their causes and some plan of action.
    I appreciate your support to understand why these errors and explain to the customer the cause of these.
    Thanks.
    Best Regards.
    Ernesto Gonzalez

    Hi,
    1. CSA denying the Java periodical update process from contacting its server. This can be safely ignored (Java is the platform of UCCX but is updated with a UCCX update, updating Java separately is not necessary, and in fact, not recommended. However, Java contains this periodic update check and - as far as I know - it cannot be turned off programmatically).
    2. Tape cleaning required - is there a tape drive attached to the server?
    3-7. Temporary network communication issue.
    G.

  • Error 62 in Event Viewer

    Hi all
    Could you shoe me about an error 62 that i saw in Event Viewer when i send email in SAP B1
    Thank you!

    Hi,
    SAP Business One mailer uses only the SMTP protocol port 25. Therefore,
    your mail server must allow SMTP traffic on the mentioned port and no firewall must be present between
    the client and the server to stop traffic on that port.
    The Error "Failed to connect to SMTP server" usually appears if a
    firewall or Antivirus application blocks port 25 of SMTP Server for
    B1. Could you please check if such applications are installed and if
    so switch it temporally off and try again to send a email.
    One simple thing you can do in order to test the connection between
    the client and the server is to configure Outlook Express with the
    desired settings.
    If you cannot send email with Outlook Express, than that means that
    either port 25 is blocked, your server doesn't listens on port 25 or
    that your server doesn't know the SMTP protocol.
    The solution for this would be to allow SMTP traffic on port 25
    between the client and the server and to make sure that your server
    "speaks" SMTP on port 25.
    If you can send email with Outlook Express, than you have to replicate
    the settings to SBOMailer, knowing that note 782611 states that it is not possible to use
    authentication in order to send SMTP mails.
    There are notes 782611 & 693306 describing how to configure this.
    If your server uses SMTP authentication, then note (782611) will give
    you explanations on how to fix this.
    Hope this will help.
    Regards,
    Gagan Thareja

  • ACPIEC Embedded Controller error in Event Viewer on XP Partition

    So, when in my XP (SP2) partittion I recently started to get hangs when I try to put the system to stand by/hybernation at the blue "preparing to go into Stand by..." screen. It just sits there, locks up and I end up having to reboot. In the XP's Event Viewer I see this ACPIEC error and that seems to be related to the BIOS. But, as we know, I am on a Mac so there is no "BIOS".
    It says "The embedded controller (EC) hardware didn't respond within the timeout period. This may indicate an error in the EC hardware or firmware, or possibly a poorly designed BIOS which accesses the EC in an unsafe manner. The EC driver will retry the failed transaction if possible."
    So, that is the only error I consistently see in the Event Viewer so I assume it is related, but if I am on a Mac and have no "BIOS" or "EC" how can I source this issue out in XP given it is a partition on my Mac?

    Hi,
    Please try to add this account: NT AUTHORITY\SYSTEM.
    More information for you:
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 2012
    https://social.technet.microsoft.com/forums/systemcenter/en-US/cd8a2c95-70db-4df6-b7f5-eedcc5d898c7/the-applicationspecific-permission-settings-do-not-grant-local-activation-permission-for-the-com
    Event ID 10016 issue in SQL Cluster Server
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/c5a27692-05c0-4ee4-b97f-1ea438b4e5f7/event-id-10016-issue-in-sql-cluster-server?forum=sqldisasterrecovery
    In addition, if there are any further requirements regarding SQL, here are some SQL forums below for you:
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for