Reinstall/repair Apache Installation from base system

Hi,
I use Snow Leopard and I was not aware of the fact that php and apache2 comes with the base installation. I delete now some .so files like /usr/libexec/apache/modauthnfile.so, so I'm not able to start apache anymore.
How can I reinstall apache so that the deleted files will be restored?
Thanks for help,
Matthias

Hello,
Option 3 (advanced): Use the command line and the fsck_hfs -l command.
Start up your computer and log in as an administrator.
Open Terminal (/Applications/Utilities).
At the prompt, type the following command and then press Return to determine your filesytem ID:
df -hl
Look for some lines of text that look like this:
Filesystem     Size   Used  Avail Capacity  Mounted on
/dev/disk0s3    37G    20G    17G    55%    /
/dev/disk0s5    37G    37G   641M    98%    /Volumes/Storage
Make a note of the first "disk" name that appears after /dev/, such as "disk0s3." This is your filesystem ID for your startup volume.
At the prompt, type the following command and then press Return:
df -hl
Then type the following command, where "disk0s3" is your filesystem ID you noted in step 4, then press Return:
sudo fsck_hfs -l /dev/disk0s3
When prompted, enter your admin password, then press Return to begin the verification.
You should see messages like these during the disk check:
** /dev/rdisk0s3 (NO WRITE)
** Root file system
** Checking HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking multi-linked files.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume Macintosh HD appears to be OK.
http://support.apple.com/kb/ts1417

Similar Messages

  • The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

    Dear Gurus,
    We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
    The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
    We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
    We updated the Kernel to the latest, but still no luck.
    Request for your quick help as we have to complete it by EOD today.
    Thanks a lot in advance.
    Best Regards,
    Anuj

    Hello Ashutosh ,
    Thanks for your reply.
    We have gone followed the below sequence:
    SCS Installation
    Database Instance Installation using backup/restore method
    CI installation. -> getting error, when we provide the Java Components DVD.
    Best Regards,
    Anuj

  • What's the difference between choosing "reinstall mountain Lion" and erasing hard drive and booting from base system?

    I would like to know what the difference would be with the following two scenarios, both starting from the command + R menu at startup:
    1. Chose the picture of the mountain lion "reinstall osx mountain lion
    2. Erase the main hard drive, and then boot from "OSX base system"
    If someone upgraded my macbook to mountain lion, did that upgrade also include a recovery partition and is that what one of these options is?

    I would like to know what the difference would be with the following two scenarios, both starting from the command + R menu at startup:
    1. Chose the picture of the mountain lion "reinstall osx mountain lion
    2. Erase the main hard drive, and then boot from "OSX base system"
    If someone upgraded my macbook to mountain lion, did that upgrade also include a recovery partition and is that what one of these options is?

  • Contact info to reset activation for old version of Dreamweaver CS3. I deactivated old installation from another system and installed on new system but will not launch to allow reactivation.

    Does phone support exist? Customer service? The airspeed velocity of an un-laiden Swallow?

    Thanks everybody… I killed the process again in Task manager after trying compatibility modes… noticed something glaring at me as I killed the process. 32 bit. Old workstation on Win7 that was working  was 32 bit and the Win8.1 is (drumroll please) 64 bit. MY guess is that if Adobe killed the ability for this to run it would have failed upon an attempt to activate, not upon launch. I think Nancy might have hit it on the head. Let me stew on this for a bit if I really want to pay more for features I already paid for once.
    Mark J Laurence, MCSE, CET
    Electrical Designer / Network Administrator
    Marquess & Associates, Inc

  • Why always failure at 45% of install of Base System Part 1?

    Ok I have had Panther run on my iMac several times only to have it screw up and destroy itself hence reinstallation. However no matter what configuration I pick of Panther, It always either freezes up or kernel panics at precisely 45% of installation of Base System Part 1. Sometimes I run the installer log as I do this to see just what makes it give up at 45% and it gives me a type 2 pax error but the files it claims give it the error are irrelevant to the install and weren't asked for, mainly files from the Dutch language folder even though I install only the english version of the system to save HD space and speed up the install pace. After every time it fails the install I erase the HD verify and repair a few times to see that its good, and it still almost always goes down at 45% though sometimes it will go as long as 65% or 75% before going under. After about a week of this at a stretch out of the blue it will take the entire install without complaint, and then last for about a week and a half sometimes 2 weeks before it ruins itself again. No, my HD isnt too old, its only 2 months old, I have a GB of RAM and at the heaviest of load it only takes about 25-30% of total available to run all my stuff. Yes, it is the full retail install version of Panther.

    Hello! The first thing that crosses my mind is the drive. You said it was about 2 mos old? When it was replaced was the jumper set correctly? I'm not real familiar with the imac setup. If the drive needed jumpering as master and if it's set to cable select all kinds of weired stuff can happen. Another thing to consider is a bad cd and lastly bad ram. If the ram is reading and writing incorrectly it will cause such behavior. I had a computer once that wouldn't complete an install from a known good cd and removing a problematic ram stick solved the problem. Tom

  • Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message 'Acrobat has detected another process which has not yet completed-'. Have now closed system both cold (full shutdown) and wa

    Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message ‘Acrobat has detected another process which has not yet completed…’. Have now closed system both cold (full shutdown) and warm (restart) over 10 times. Every time I go to reinstall I get message.

    I would run http://labs.adobe.com/downloads/acrobatcleaner.html and delete any Acrobat folders that have been created, then try again. Be sure to log in as the administrator and disable anti-virus when you have problems like this.

  • Reinstall just apache from Mac OS 10.4 Install CD

    I installed an application to enable php with the os installed apache, ended up not liking the app and deleting it. Since, apache (personal web sharing) is faded and says that it did not come installed on this computer and to use the mac os install disk.
    Where can I find the files on the CD to replace/install on my harddrive to start completely fresh again?

    This Apple doc talks about optional installs without having to reload your OS -- but Apache isn't on the list.
    I think you have two choices available to you:
    (1) Download Pacifist to extract the needed installer pieces, that you can't normally get to, from the OS X installer CD (I am not familiar with this product so can't attest to its efficacy or user-friendliness) or
    (2) do an "archive and reinstall" of your OS from the installer CD. You'll have to go into the "Previous Systems" folder and move the applicable customizations of your OS back over into the new system directory after you have done the Intel or PPC combo update and any security updates via Software Update. After all that, then you can delete the "Previous Systems" folder.

  • Erased my Harddisk, coudnt reinstall Mac Os Lion from internet recovery as it says "Could not find installation information on this Machine"

    Hi, i just got this Macbook Pro last October and recently i wanted to have a clean install of Mac Os Lion so i erased my harddisk in disc utilities, and found myself unable to install back Mac Os Lion from the internet.. It says 'Coudnt get installation information on this machine', I don't think my internet is the issue as ive tried installating it in both of my houses :/. Tried asking my friend.. he ended up screwing things up in Disc Utilities. If i recall carefully.. My Disc utilities used to look like this
    500GB Toshiba Harddisk
    -Macintosh HD
    -Disk1
    Mac OX Base System
    but now its just
    500gb Toshiba Harddisk
    -Mac OX Base System
    Sorry if i don't know what i'm talking about as i'm quite new to using a Mac and any help would be appreciated, thanks!

    The fix is to use Disk Utiilty to make the Lion Partition a tiny bit smaller.
    https://support.apple.com/kb/TS3926
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • I had an issue running Bridge CS6 on my laptop yesterday and after failing to troubleshoot I un-installed it from my system but have yet to find any way to download/reinstall it. I have web design premium and tried uninstalling/reinstalling photoshop and

    I had an issue running Bridge CS6 on my laptop yesterday and after failing to troubleshoot I un-installed it from my system but have yet to find any way to download/reinstall it. I have web design premium and tried uninstalling/reinstalling photoshop and illutsrator as I'd seen bridge was coupled with those but had no luck. Is it possible to download bridge as a stand alone with a web design premium license for cs6

    restart your design premium installation, select custom install and you should see options to pick which programs you want to install.
    tick bridge and install

  • Post Leopard Installation - Transfer data from "Previous System" folder

    After the first attempt to install Leopard and got the evil blue screen, I had to reinstall my old Tiger from the original installation disks, then attempted a new installation of Leopard. This time I chose Archive and Install as one support article suggested, and chose Preserve user and network settings as instructed. This time the Leopard installation was successful, but now how do I retrieve my data (photos/itunes/mail)etc. from the "Previous System" folders?

    There should be no need to sync the files. A previous system folder happens when you do an archive and install, so what's in that folder is identical to what your Mac was when you last did one. Presumably you've changed a lot of things since then and wouldn't want to go back.
    Unless there are a few files you deleted and want back, then just copy them over. Then delete the entire thing, it's using up disk space.
    Kevin

  • How do I restore Firefox base after reinstalling Windows , but I have file system safe(all program folders)?

    How do I restore Firefox base after I reinstalled Windows , but I have my system and program old folders safe. ( exact Firefox Application and Program Files folders etc)?
    == This happened ==
    Every time Firefox opened
    == I reinstalled Windows

    What I mean is I have saved passwords and some website adresses in my Firefox that was on deleted windows ( but I saved the file system so it works from there using another computer) but all I need is passes and saved links . just the complete copy of my old setups and such . is that possible?

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • Using Windows 8.1 with Directx11, when I lauch Photoshop Elements Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the

    Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.

    Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
    1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
    2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play

  • My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

    My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
    Checking in the log revealed the following error:
    Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
    The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

  • How do I run disk repair on Mac OS X Lion 10.7.5 from own system?

    how do I run disk repair on Mac OS X Lion 10.7.5 from own system?

    Boot into the Recovery HD (restart holding down Command +r), select Disk Utility>Macintosh HD>Repair Disk. More info here:
    OS X: About OS X Recovery

  • Maybe you are looking for

    • Can't send e-mail on one phone, but can on another

      I got two iphones - one for myself and one for my wife. We have a family plan, and I set mine up first and hers second. Amongst the problems: 1. I can receive calls and she can't. The phones were activated at 1830 and 1845 on 6/30. I got the text mes

    • Asset Depreciation by Shiftwise (* Day wise tooo)

      Hi AA Experts, My client have a requirement of calculate a depreciation on shift wise. Scenario is as below: In the month of Jan-11 Shift       Days                   Depreciation rate 1st     -    31 days        -       5% 2nd    -    25 days       

    • Code undefined business partners error

      Hello, I am new to SAP and my company requires tu upload all business contacts to SAP Business One. I am trying to use Excel Export tool bu I get the error "code undefined business partners". What could be the reason and solution? Thanks

    • Recover Partiton still alive, but OneKey does not start :(

      Hey, I'm new here I bougt an S12 two days ago, everything worked fine, but then i decided to splitt the partitions (using paragon) after that, everything crashed, I used OneKey and recovered my System, perfekt job ... but then i realiced that i've lo

    • My iTunes 10.5.2 does not close correctly

      When I close iTunes the iTunes.exe proces is not terminated and remains visible in the Task Manager at 0% CPU usage. Also the iTunes Library.xml file is not regenereated/updated on closure. After I close iTunes I cannot restart iTunes. I first have t