Performance problems using WLS6.1 with the thin driver for Ora9i from OTN

Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses. It works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

I had done this from the very beginning, but I was still getting very bad performance under
concurrent accesses. I even followed Sree's instructions and removed the old thin driver from
weblogic.jar, but this didn't help. I am now trying to get the OCI driver for 9i running and hope
this will solve the problem.
Samuel
Tamilselvan Ramasamy wrote:
You have to use Oracle's Oracle 9i thin driver .
put this driver infront of the classpath i.e before weblogic_sp.jar and
weblogic.jar
/selvan
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]..
The BEA driver is available in WLS6.1SP2 which is GA.
hth
sree
"Samuel Kounev" <[email protected]> wrote in message
news:[email protected]..
Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under
WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses.
It
works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

Similar Messages

  • I am getting an error encountered problem with the display driver for my Photoshop CS5 extended

    I have Windows 7 and have used CS5 extended with no problems for quite a while now.
    Last week I started up CS5 and received the error:
    "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
    "Please close program and uninstall and re-install if problem persists"
    I was able to edit, however when I went to save my work it would not do so. The following error came up.
    "Could not complete the command because the extension could not be loaded"
    "Could not save a copy as .....because of a program error"
    I checked to make sure I have the latest driver, I also uninstalled and re-installed the program and I am still getting the errors.
    Can anyone help with this?

    Error 1402 | Error 1406 | Acrobat, Reader

  • Support for using TNSNAMES with Oracle Thin Driver?

    Hi.
    In the official Oracle JDBC FAQ (http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm), they say that from the "10.2.0.1.0" release, the Thin driver hast support for using TNSNAMES entries. Thus, you can use URLs like this:
    jdbc:oracle:thin:@GL (thin driver, but connection info defined in tnsnames.ora)
    Does anyone know how could I use an URL like this? Do I have to install the Oracle client? or can I simply copy a tnsnames.ora file someplace on disk and specify its ubication through an environment variable or something like that?
    I haven't find util information in the Oracle site....any ideas are much appreciated.
    Thanks in advance.

    I just found some info here:
    Re: Thin Driver and Load Balancing
    Thank you very much.

  • Using PVCs with the ATM driver

    I am using using Solaris 8 with SunATM 5.0 installed.
    I've written a program that uses atm_open and atm_add_vpci
    When i run this program as a normal user the atm_add_vpci call returns with the error ENOTOWNER
    When i run this program as root everything works fine.
    I want to run this program as a normal user.
    Can anyone tell me how I can do this?
    (the program is does the same as the program 'raw -I 500' from the /opt/SUNWconn/atm/examples directory

    Peter Wu wrote:
    Hello,
    Does anyone know if there is any way to use CachedRowSet with sybase JDBC
    driver?
    I knew there was posting regarding this in the year 2000. And now it 2003. Thanks!
    PeterYes there is, but it involves some driver-specific properties, and I know this from
    a discussion I read on their jdbc support newsgroup. That would be the best place
    for an answer about their driver. Try news://forums.sybase.com, in the sybase.public.jconnect50
    group.
    Joe

  • Problem while Connecting with oracle thin driver

    I have been trying for the past two days for connecting oracle 8.1.1.6 using thin driver. I set the classpath also. It throws me the following exception.
    Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap
    ter could not establish the connection
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:323)
    at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:260)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
    va:365)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
    at java.sql.DriverManager.getConnection(DriverManager.java:517)
    at java.sql.DriverManager.getConnection(DriverManager.java:177)
    at Employee.main(Employee.java:23)
    I am trying to acheive the connection using the following piece of code
    Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@THIRU:1521:ORCL",
                        "scott", "tiger");
    The problem lies in that piece of code only,
    In the TNSNAMES.ora the entries are as follows.
    THIRU =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = Thiru)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = thiru)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    How to solve this one. Can anybody tell me how to provide the proper url.
    thanks in advance

    You were very close.
    "Thiru" as opposed to "THIRU" should be the name of the machine running the database, but that would imply that the DNS lookups are case sensitive, and we know that's not the case.
    My guess, because the network adapter itself is reporting an error, is that "Thiru" evaluates to an IP address that isn't correct, that is, it's trying to make a connection to a specific address and getting nothing back in return.
    Anyway, I think your program(s) are just fine, and your network is misconfigured. Incidently, it is always a good idea in cases like this to use the full name of the machine, for example...
    ...getConnection( "jdbc:oracle:thin:@thiru.maran1977.com:1521:ORCL"...
    and in the database configuration itself...
    (ADDRESS = (PROTOCOL = TCP)(HOST = thiru.maran1977.com)(PORT = 1521))
    You may also use the IP address if you wish.

  • Problems with the Vista Driver for Audigy 2

    Hello erverybody,
    today I installed Vista Ultimate 32bit. With the result that the applications and drivers of my Creative CD don't work. I downloaded the new Vista Driver for my Audigy 2 ZS but I must find out that there are no DTS, EAX and also no CMSS 3D Support integrated is.
    I could only choose the option CMSS in the audio console but no CMSS 3D as i have it under windows xp.
    My question to Creative, is it planed that these features will be supported with vista in the future or can i take my soundcard to the garbage ?
    LG BenMessage Edited by Gnubbel85 on 06-05-200706:55 AM

    There is some kind of unofficial driver version located here: I'm currently downloading it and I'll?try. Part http://files.filefront.com/SBAXWXCD+R2partrar/;8604885;/Part2: http://files.filefront.com/SBAXWXCD+R2part2rar/;8606942;/?Since there seems no official way of using my hardware's?DTS and Dolby Digital decoding function on Vista and this is common for all Audigy. I have Audigy 2 ZS plat. , I love?this card It sounds best in the world but Creative has failed to satisfy its customers on Windows Vista. A company has to make its customers feel special, I don't think I'm going to buy another Creative product?if this issue is not resolved.

  • A problem using Flickr with the new version of Firefox.

    Before the new upgrade in Firefox, when I went to www.Flickr.com and clicked on "log in", a new window opened up prompting me for password and ID. After I entered them, that window would close and bring me back to the window I clicked "log in" on.
    Now, the new window stays open with the first page of Flickr again, leaving me with two exact, logged in pages.

    The Google Toolbar "will not be supported on Firefox 5 and future versions." <br />
    http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
    http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
    The Google Toolbar '''7.1.20110512W''' version does work pretty good in Firefox 5.0 by using the Compatibility Reporter extension. But not every feature works 100%.<br />
    https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html

  • HELP! Problem using HPSCAN.exe or TWAIN driver for HP Laserjet Pro cm1415fnw using Windows 7

    I have been using the HP Laserjet Pro cm1415fnw for over a year without a problem.  At the time when I first purchased the unit, I was using a Dell desktop with Windows XP and connected the printer via USB port.  I was able to print and scan from my computer, including from within applications that use TWAIN scanning driver such as Word, Acrobat, etc.
    I have since upgraded to an HP slimline s5-1160 computer using Windows 7.  I installed the Laserjet software from my installation CD's without a problem.  The printer is connected to the computer by USB port.  I can continue to print without a problem.  However, I no longer am able to scan using the HP software (HPscan.exe) nor from within applications that use TWAIN scanning driver such as Word, Acrobat, etc.  When I attempt to do so, it takes a long time before it asks me what TWAIN scan driver to select.  When I select the HP cm1410 MFP series, the program either crashes or reverts to the state it was before I attempted to scan an image into a document from within the program.
    I can however scan successfully using the Windows Scan and Fax wizard or if I choose "Devices and Printers" from the Start Menu and select "Start scan" from the menu after right-clicking the HP printer icon.  However this option limits my use of the scanner -- I cannot scan to a PDF nor can I scan multiple pages into an OCR application.  I'm forced to scan to either a JPG or TIF or PNG.
    As for attempting to resolve this problem I have done the following with no success:
    Uninstall and reinstall the full software and drivers (and using the most recent version on the HP website)
    Change USB ports and/or cables
    Run the HP scan diagnostic utility, which seems to show an error at the WIA scanning step and then recommends that I uuninstall and reinstall the full software.  When I skip that and allow it to check for TWAIN scanning, it gives me a similar error, suggesting that I use the most recent version of the drivers (the driver that I am using is v 3.0 dated 11/12/2009)  Therefore in this case the HP scan diagnostic utility does NOT provide a fix for this problem other than uninstall and reinstall, which I have done several times to no avail
    Contact HP support both for the computer and the multifunction printer (which as I understand are different support staff).  The printer staff claims it's a software problem and that the computer staff should be able to resolve it (something about not having "launchpad" installed properly.  When I contact the computer staff, they claim it's a printer driver issue.  So I am at a standstill
    I researched the HP support forums only to find from this link - http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02661093&cc=us&dlc=en&lc=en&product=4089468&tmp​... - that if you cannot scan from HP software that you can use the programs that rely on WIA drivers (Windows Fax and Scan) which I already know I can do but implies that HP does NOT have a solution for how to scan using their own software!
    My gut tells me that this is one of those problems that many others may have but for which there is no workable solution.  It's possible that during the course of uninstalling and reinstalling the software, remnants may remain behind that prevent proper functioning of the drivers, but without knowing how to specifically "clean" those remnants before reinstalling the software, I am at a loss.  Oh and by the way, I've also tried using CCleaner and Norton Registry Cleaner in an attempt to clean those remnants, but that effort didn't help.  
    My question is basically this... does anyone know of a fix around this problem or must I resign myself to using the Windows Fax and Scan wizard to scan in documents and images and forget about using TWAIN programs as HP seems to be suggesting?  I would think that given that I am using an HP printer/scanner along with an HP computer with Windows 7 that this problem should NOT be a problem!  
    This question was solved.
    View Solution.

    Before attempting to install the printer on my computer (HP slimline s5-1160), I had been able to successfully install the printer previously on two other computers: a Lenovo T-410 laptop (work computer using Windows XP) and an HP Pavilion Elite HPE (wife's computer using Windows 7).
    On those computers, I can use the TWAIN driver from within applications without a problem, and the HPSCAN.exe file works as well.  Both computers connect to the printer wirelessly.
    It is while trying to install the printer on my home computer via USB that I am having all sorts of difficulty. I have also tried to connect my s5-1160 to the printer wirelessly from my computer. I also checked the Windows Services, and all seems fine there.  I also tried switching USB ports and cables.   Again, no luck with the scanning using TWAIN driver. 
    One other point: when I use the original installation CD that came with the printer to install on the s5-1160, the installation seems to stop when it says "Checking requirements for installation"  That didn't happen with the two other computers.   However, that problem doesn't happen the s5-1160 when I used the more recent version of the full software from the HP website.
    Let me reiterate.  I have never had any problems with printing from any computer.  The scanner works fine from my s5-1160 if I resort to using the scanner and fax wizard using the WIA drivers.  What I am unable to do is to get the scanner to work from within an application using the TWAIN driver or if I use the native HP application (hpscan.exe).  Nothing seems to happen.   Because of that I cannot scan directly into a PDF.
    And the only fix that the HP scan diagnostic utility continues to recommend is that I uninstall and reinstall the software.  It shows errors in the WIA scanning step and TWAIN step.
    Is it possible that because of behind-the-scenes Windows updates that my s5-1160 is receiving that a software conflict is created that prevents the TWAIN driver from functioning properly?  Other than that I am at a loss to figure out why this is happening.

  • Problems using ipod as portable hard drive for school (going from mac to pc

    I was trying to use my ipod as a kind of flash drive, but when i got to school to retrieve my paper off my ipod, the pc computer said that my external disc was not formatted. I DID NOT format my ipod. Any Ideas on how to remedy this?

    Open up an iPod Updater on a Windows machine and restore the software. I'm not sure if it works on the Update option
    iMac G5 with iSight   Mac OS X (10.4.7)   iPod with Video (60GB)

  • Cannot use safari as the thin filter avoids me from clicking anything on the page, cannot use safari as the thin filter avoids me from clicking anything on the page

    i am not able to acess any pages in my safari ... the address bar and the google search bar is working though ... but anything on the page ... on any page is not clickable ... i am not able to click anywhere on the pages and a thin filter layer is appearing on the pages as if avoiding me from clickin or touching anywhere on the page

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • JDBC thin driver for oracle 7.1.3

    Hi,
    we r using Oracle 7.1.3. i would like to know where i can get the
    thin driver for java compatible with the oracle version 7.1.3 so
    that i need not install an oracle client in the clients pc.
    thanks
    veera
    null

    Jay (guest) wrote:
    : BUBBA (guest) wrote:
    : : Veera Nagendran (guest) wrote:
    : : : Hi,
    : : : we r using Oracle 7.1.3. i would like to know where i can
    : get
    : : the
    : : : thin driver for java compatible with the oracle version
    : 7.1.3
    : : so
    : : : that i need not install an oracle client in the clients pc.
    : : : thanks
    : : : veera
    : : Thedatabase you're using went out of support over 2 years
    ago.
    : : oracle doesn't provide jdbc drivers for anything less than
    : : supported version 7.3.4.
    : So why does Oracle make this claim
    : "The Thin driver does not require Oracle software on the client
    : side. It connects to any Oracle database of version 7.2.x and
    : higher. The driver requires a TCP/IP listener on the server
    : side. " ???
    : Jay
    re-read my earlier reply -- the comment was :
    Thedatabase you're using went out of support over 2 years
    ago. oracle doesn't provide jdbc drivers for anything less
    than the minimum supported version ---> 7.3.4.At no time did i refer to the client s/w being required !!
    also it was not tested against unsupported version of the
    rdbms ...
    also rdbms 7.1.3 isn't y2k compliant.
    use it at your own risk..
    what "claim" are you saying oracle made ??
    null

  • Problems with Oracle Thin Driver

    Hi,
    I'm having major problems configuring the Oracle Thin Driver for use
    with CMP Entity Beans. What am I doing wrong?
    Configuration: Windows 2000 Professional, WebLogic 6.1, Oracle 8.1.6,
    Oracle Thin Driver 8.1.7 (classes12.zip is the first thing in the
    classpath)
    I first created the connection pool through the console, here's the
    generated xml:
    <JDBCConnectionPool
    DriverName="oracle.jdbc.xa.client.OracleXADataSource"
    MaxCapacity="2" Name="myXAPool"
    Properties="user=XXX;url=jdbc:oracle:thin:@192.168.0.145:1521:db;password=XXX;dataSourceName=myXAPool"
    Targets="server"/>
    The connection pool deployed fine, so I went ahead and created the TX
    DataSource through the console:
    <JDBCTxDataSource JNDIName="mySource" Name="myXASource"
    PoolName="myXAPool" Targets="server"/>
    The log file shows that the TX DataSource was also created. Next step
    was deploying the application. I created a new application through the
    console and uploaded the ear file containing the application (several
    SessionBeans, EntityBeans and a web application). Upon loading the first
    CMP EntityBean (They have "mySource" set as the name of the DataSource
    in the <data-source-name> tag), the following error showed up in the
    log:
    <04.10.2001 09:02:50 CEST> <Info> <EJB> <EJB Deploying file:
    ContractClassStopover.jar>
    <04.10.2001 09:02:51 CEST> <Error> <J2EE> <Error deploying application
    ContractClassStopover:
    Unable to deploy EJB: ContractClassStopoverBean from
    ContractClassStopover.jar:
    The Entity EJB requires the table: CONTRACT_CLASS_STOPOVER to be
    accessible. Please ensure that this table exists and is accessible.
    >
    <04.10.2001 09:02:51 CEST> <Error> <Management> <Error deploying
    application .\config\server\applications\app.ear:
    java.lang.reflect.UndeclaredThrowableException>
    The table exists, so I had a look at the jdbc log file. Here's what
    happened in there:
    DRVR FUNC OracleConnection.OracleConnection(par, pc, autoCommit=false)
    DRVR FUNC
    OracleConnection.initialize(ur="jdbc:oracle:thin:@192.168.0.145:1521:db",
    us="XXX", access)
    DRVR FUNC OracleConnection.initClientDataSupport()
    DRVR OPER OracleConnection.setAutoCommit(autoCommit=false)
    DRVR OPER OracleConnection.getAutoCommit() returned false
    DRVR DBG1 OracleXAResource.start():start
    DRVR DBG1 Should use OracleXid for 8.1.6 database
    DRVR OPER OracleConnection.getTransactionIsolation() returned 2
    DRVR OPER OracleConnection.isReadOnly()
    DRVR OPER OracleConnection.getCatalog()
    DRVR OPER OracleConnection.getAutoCommit() returned false
    DRVR OPER OracleConnection.close()
    DRVR OPER OracleConnection.close()
    DRVR FUNC OracleConnection.OracleConnection(par, pc, autoCommit=false)
    DRVR FUNC
    OracleConnection.initialize(ur="jdbc:oracle:thin:@192.168.0.145:1521:db",
    us="XXX", access)
    DRVR FUNC OracleConnection.initClientDataSupport()
    DRVR OPER OracleConnection.setAutoCommit(autoCommit=false)
    DRVR OPER OracleConnection.getAutoCommit() returned false
    SQLException: SQLState() vendor code(-6)
    java.sql.SQLException: XA error: XAER_PROTO : Routine was invoked in an
    inproper context start() failed on resource 'myXAPool' null
    at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1044)
    at
    weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1010)
    at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
    at
    weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:226)
    at
    weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
    at
    weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
    at
    weblogic.ejb20.utils.TableVerifier.checkTableAndColumns(TableVerifier.java:125)
    at
    weblogic.ejb20.utils.TableVerifier.verifyTableAndColumnsExist(TableVerifier.java:226)
    at
    weblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(TableVerifier.java:294)
    at
    weblogic.ejb20.cmp11.rdbms.PersistenceManagerImpl.verifyTablesExist(PersistenceManagerImpl.java:172)
    at
    weblogic.ejb20.cmp11.rdbms.PersistenceManagerImpl.setup(PersistenceManagerImpl.java:120)
    at
    weblogic.ejb20.manager.BaseEntityManager.setupPM(BaseEntityManager.java:197)
    at
    weblogic.ejb20.manager.BaseEntityManager.setup(BaseEntityManager.java:173)
    at weblogic.ejb20.manager.DBManager.setup(DBManager.java:123)
    at
    weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.deploy(ClientDrivenBeanInfoImpl.java:793)
    at
    weblogic.ejb20.deployer.Deployer.deployDescriptor(Deployer.java:1250)
    at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:939)
    at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
    at weblogic.j2ee.Application.addComponent(Application.java:160)
    at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
    at java.lang.reflect.Method.invoke(Native Method)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:482)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:352)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:926)
    at
    weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:913)
    at
    weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:898)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:618)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
    at $Proxy68.addTarget(Unknown Source)
    at
    weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:833)
    at
    weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:930)
    at
    weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:852)
    at
    weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:768)
    at
    weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:701)
    at
    weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:198)
    at java.lang.reflect.Method.invoke(Native Method)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
    at $Proxy5.update(Unknown Source)
    at
    weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:150)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at
    weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:190)
    at
    weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at
    weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
    at
    weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:172)
    at
    weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2390)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1959)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Can someone please help me figure out what's going wrong here?
    Thanks in advance,
    Nils
    ============================
    [email protected]

    Thanks for the reply!! I was expecting something like this. I will look
    into an upgrade to 8.1.7.
    Take care,
    Nils
    Priscilla Fung wrote:
    >
    Hi,
    You need to use an Oracle 8.1.7 server for XA features. Refer to Third Party
    JDBC XA drivers doc for more info: http://e-docs.bea.com/wls/docs61/jta/thirdpartytx.html#1070650
    Regards,
    Priscilla
    Nils Winkler <[email protected]> wrote:
    Hi,
    I'm having major problems configuring the Oracle Thin Driver for use
    with CMP Entity Beans. What am I doing wrong?
    Configuration: Windows 2000 Professional, WebLogic 6.1, Oracle 8.1.6,
    Oracle Thin Driver 8.1.7 (classes12.zip is the first thing in the
    classpath)
    I first created the connection pool through the console, here's the
    generated xml:
    <JDBCConnectionPool
    DriverName="oracle.jdbc.xa.client.OracleXADataSource"
    MaxCapacity="2" Name="myXAPool"
    Properties="user=XXX;url=jdbc:oracle:thin:@192.168.0.145:1521:db;password=XXX;dataSourceName=myXAPool"
    Targets="server"/>
    The connection pool deployed fine, so I went ahead and created the TX
    DataSource through the console:
    <JDBCTxDataSource JNDIName="mySource" Name="myXASource"
    PoolName="myXAPool" Targets="server"/>
    The log file shows that the TX DataSource was also created. Next step
    was deploying the application. I created a new application through the
    console and uploaded the ear file containing the application (several
    SessionBeans, EntityBeans and a web application). Upon loading the first
    CMP EntityBean (They have "mySource" set as the name of the DataSource
    in the <data-source-name> tag), the following error showed up in the
    log:
    <04.10.2001 09:02:50 CEST> <Info> <EJB> <EJB Deploying file:
    ContractClassStopover.jar>
    <04.10.2001 09:02:51 CEST> <Error> <J2EE> <Error deploying application
    ContractClassStopover:
    Unable to deploy EJB: ContractClassStopoverBean from
    ContractClassStopover.jar:
    The Entity EJB requires the table: CONTRACT_CLASS_STOPOVER to be
    accessible. Please ensure that this table exists and is accessible.
    >
    <04.10.2001 09:02:51 CEST> <Error> <Management> <Error deploying
    application .\config\server\applications\app.ear:
    java.lang.reflect.UndeclaredThrowableException>
    The table exists, so I had a look at the jdbc log file. Here's what
    happened in there:
    DRVR FUNC OracleConnection.OracleConnection(par, pc, autoCommit=false)
    DRVR FUNC
    OracleConnection.initialize(ur="jdbc:oracle:thin:@192.168.0.145:1521:db",
    us="XXX", access)
    DRVR FUNC OracleConnection.initClientDataSupport()
    DRVR OPER OracleConnection.setAutoCommit(autoCommit=false)
    DRVR OPER OracleConnection.getAutoCommit() returned false
    DRVR DBG1 OracleXAResource.start():start
    DRVR DBG1 Should use OracleXid for 8.1.6 database
    DRVR OPER OracleConnection.getTransactionIsolation() returned 2
    DRVR OPER OracleConnection.isReadOnly()
    DRVR OPER OracleConnection.getCatalog()
    DRVR OPER OracleConnection.getAutoCommit() returned false
    DRVR OPER OracleConnection.close()
    DRVR OPER OracleConnection.close()
    DRVR FUNC OracleConnection.OracleConnection(par, pc, autoCommit=false)
    DRVR FUNC
    OracleConnection.initialize(ur="jdbc:oracle:thin:@192.168.0.145:1521:db",
    us="XXX", access)
    DRVR FUNC OracleConnection.initClientDataSupport()
    DRVR OPER OracleConnection.setAutoCommit(autoCommit=false)
    DRVR OPER OracleConnection.getAutoCommit() returned false
    SQLException: SQLState() vendor code(-6)
    java.sql.SQLException: XA error: XAER_PROTO : Routine was invoked in
    an
    inproper context start() failed on resource 'myXAPool' null
    at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1044)
    at
    weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1010)
    at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
    at
    weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:226)
    at
    weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
    at
    weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
    at
    weblogic.ejb20.utils.TableVerifier.checkTableAndColumns(TableVerifier.java:125)
    at
    weblogic.ejb20.utils.TableVerifier.verifyTableAndColumnsExist(TableVerifier.java:226)
    at
    weblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(TableVerifier.java:294)
    at
    weblogic.ejb20.cmp11.rdbms.PersistenceManagerImpl.verifyTablesExist(PersistenceManagerImpl.java:172)
    at
    weblogic.ejb20.cmp11.rdbms.PersistenceManagerImpl.setup(PersistenceManagerImpl.java:120)
    at
    weblogic.ejb20.manager.BaseEntityManager.setupPM(BaseEntityManager.java:197)
    at
    weblogic.ejb20.manager.BaseEntityManager.setup(BaseEntityManager.java:173)
    at weblogic.ejb20.manager.DBManager.setup(DBManager.java:123)
    at
    weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.deploy(ClientDrivenBeanInfoImpl.java:793)
    at
    weblogic.ejb20.deployer.Deployer.deployDescriptor(Deployer.java:1250)
    at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:939)
    at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
    at weblogic.j2ee.Application.addComponent(Application.java:160)
    at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
    at
    weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
    at java.lang.reflect.Method.invoke(Native Method)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:482)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:352)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:926)
    at
    weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:913)
    at
    weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:898)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:618)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
    at $Proxy68.addTarget(Unknown Source)
    at
    weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:833)
    at
    weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:930)
    at
    weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:852)
    at
    weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:768)
    at
    weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:701)
    at
    weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:198)
    at java.lang.reflect.Method.invoke(Native Method)
    at
    weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
    at
    weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
    at
    weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
    at
    com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
    at
    weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
    at $Proxy5.update(Unknown Source)
    at
    weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:150)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at
    weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:190)
    at
    weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at
    weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
    at
    weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:172)
    at
    weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2390)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1959)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Can someone please help me figure out what's going wrong here?
    Thanks in advance,
    Nils
    ============================
    [email protected]
    ============================
    [email protected]

  • Can't create connection pool using weblogic 6.1 with Oracle thin driver

    Hi !
    I have tried to create a connection pool from adminconsole. My CLASSPATH setting
    is as follows :
    F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
    D:\Oracle\Ora81\jdbc\lib\classes12.zip;
    D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
    D:\Oracle\Ora81\jdbc\lib\classes111.zip;
    F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
    D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
    D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
    D:\Oracle\Ora81\lib;
    F:\ant\jakarta-ant1.\bin;
    E:\weblogic\oci\classes;
    E:\weblogic\oci\classes\weblogic\xml\license;
    E:\weblogic\oci\license;
    E:\bea\wlserver6.1\lib;
    E:\PetStoreHome\petstore1.3;
    Following is the configuration.
    #Oracle thin driver Method #2
    weblogic.jdbc.connectionPool.thin=\      
    url=jdbc:oracle:thin:@test:1521:PROJECT,\      
    driver=oracle.jdbc.driver.OracleDriver,\
         initialCapacity=4,\
         maxCapacity=10,\
         capacityIncrement=1,\
         props=user=xxx;password=xxx;server=test
    #Add a TXDataSource for the connection pool:
    weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
    # Add an ACL for the connection pool:
    weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
    I did append the file weblogic.properties with the above config. Now when I start
    the Weblogic server I get the following error :
    Starting WebLogic Server ....
    <Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading configuration file
    .\config\petstore\config.xml ...>
    <Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting WebLogic Admin
    Server "petstoreServer" for domain "petstore">
    <Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting discovery of Manag
    ed Server... This feature is on by default, you may turn this off by passing -Dw
    eblogic.management.discover=false>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
    weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB) can't be creat
    ed with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
    weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB) can't be creat
    ed with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
    weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB) can't be
    cr
    eated with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data Source creation:
    weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin) can't be
    created with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application Poller not star
    ted for production server.>
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    After the server has booted, your browser should
    automatically launch and point to the WebLogic Server
    Tour running on this server. If your browser fails to
    launch, point your browser to the URL
    "http://burtsun:7001"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    <Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThread listening
    on port 7001>
    <Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThread listeni
    ng on port 7002>
    <Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started WebLogic Admin
    Server "petstoreServer" for domain "petstore" running in Production Mode>
    Could anyone please help me ?
    Thanks
    ..Madhuri

    Madhuri wrote:
    >
    Hi Joe !
    I didn't get what you would like to point out. Actully, I am using same config.,
    but not to disclose the info. I gave you @test and username/password xxx/xxx.Ok. Now, assuming your pool looks like what I showed, the issue is probably
    that there are multiple Oracle driver zips around, and your standlaone program
    is using a different, newer, better one than the server. Our weblogic jar files
    include a classes12.zip Oracle thin driver, but there are multiple versions of
    classes12.zip, and the latest from oracle is better than the one we sealed into
    our packaging. Please use jave -verbose to identify exactly which Oracle sip file
    you are using in the successful case, then make sure this zip file comes before
    any weblogic stuff in your weblogic server's classpath, so we'll use the same
    driver. This should work. Edit the script you sue to start weblogic to verify
    the classpath does end up with the oracle driver ahead of all weblogic stuff.
    Joe
    >
    Please let me know.
    Thanks
    .Madhuri
    Joseph Weinstein <[email protected]> wrote:
    Madhuri wrote:
    Hi Joe !
    Here is the sample java code. Please let me know how I can test thisin weblogic
    6.1.
    Thanks
    .MadhuriWell fine! That was easy. Your pool definition didn't have the same URL
    or
    user or password as this code. Try this for your pool definition:
    weblogic.jdbc.connectionPool.thin=\
    url=jdbc:oracle:thin:@adl-gbsdevel:1521:PROJECT,\
    driver=oracle.jdbc.driver.OracleDriver,\
    initialCapacity=10,\
    maxCapacity=10,\
    capacityIncrement=1,\
    testConnsOnReserve=true,\
    testTable=dual,\
    props=user=mkelkar;password=mkelkar
    Let me know,,,
    Joe
    Joseph Weinstein <[email protected]> wrote:
    The key is in the log:
    Could not create pool connection.
    The DBMS driver exception was:
    java.sql.SQLException: invalid arguments in call
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
    Now we need to simplify the problem. Please make a simple 15-line
    standalone
    Java program like you'd find with the Oracle driver's examples, with
    no
    weblogic code in the picture. Just make a JDBC connection using Oracle's
    driver, and show me that code. Then I can translate that into a pool
    definition.
    Joe
    Madhuri wrote:
    Hi Joe !
    Thanks for your prompt reply. I tried the way you suggested but
    it
    still it gives
    me the same error. I am attching here the weblogic.log file.
    Thanks again
    ..Madhuri
    Joseph Weinstein <[email protected]> wrote:
    We'd want to see the log during booting, where the pool
    is being created to see why that failed. Try a pool
    definition with no blank lines, no whitespace at the
    end of lines, and no server property. The thin driver
    doesn't like that:
    weblogic.jdbc.connectionPool.thin=\
    url=jdbc:oracle:thin:@test:1521:PROJECT,\
    driver=oracle.jdbc.driver.OracleDriver,\
    initialCapacity=4,\
    maxCapacity=10,\
    capacityIncrement=1,\
    props=user=xxx;password=xxx
    Joe
    Madhuri wrote:
    Hi !
    I have tried to create a connection pool from adminconsole. My
    CLASSPATH
    setting
    is as follows :
    F:\SOAP\soap-2_2\lib;F:\SOAP\soap-2_2;
    D:\Oracle\Ora81\jdbc\lib\classes12.zip;
    D:\Oracle\Ora81\jdbc\lib\nls_charset12.zip;
    D:\Oracle\Ora81\jdbc\lib\classes111.zip;
    F:\SOAP\soap-2_2\lib\jaf-1.0.1\activation.jar;
    D:\Oracle\Ora8\Apache\Jsdk\src\javax\servlet\http;
    D:\Oracle\Ora81\Apache\Jsdk\src\javax\servlet;
    D:\Oracle\Ora81\lib;
    F:\ant\jakarta-ant1.\bin;
    E:\weblogic\oci\classes;
    E:\weblogic\oci\classes\weblogic\xml\license;
    E:\weblogic\oci\license;
    E:\bea\wlserver6.1\lib;
    E:\PetStoreHome\petstore1.3;
    Following is the configuration.
    #Oracle thin driver Method #2
    weblogic.jdbc.connectionPool.thin=\
    url=jdbc:oracle:thin:@test:1521:PROJECT,\
    driver=oracle.jdbc.driver.OracleDriver,\
    initialCapacity=4,\
    maxCapacity=10,\
    capacityIncrement=1,\
    props=user=xxx;password=xxx;server=test
    #Add a TXDataSource for the connection pool:
    weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.thin=thin
    # Add an ACL for the connection pool:
    weblogic.allow.reserve.weblogic.jdbc.connectionPool.thin=everyone
    I did append the file weblogic.properties with the above config.
    Now
    when I start
    the Weblogic server I get the following error :
    Starting WebLogic Server ....
    <Nov 29, 2001 2:24:16 PM EST> <Notice> <Management> <Loading
    configuration
    file
    \config\petstore\config.xml ...>
    <Nov 29, 2001 2:24:22 PM EST> <Notice> <WebLogicServer> <Starting
    WebLogic
    Admin
    Server "petstoreServer" for domain "petstore">
    <Nov 29, 2001 2:24:26 PM EST> <Notice> <Management> <Starting
    discovery
    of Manag
    ed Server... This feature is on by default, you may turn this
    off
    by
    passing -Dw
    eblogic.management.discover=false>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
    Source
    creation:
    weblogic.common.ResourceException: DataSource(jdbcthin.SignOnDB)
    can't
    be creat
    ed with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
    Source
    creation:
    weblogic.common.ResourceException: DataSource(jdbcthin.EstoreDB)
    can't
    be creat
    ed with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
    Source
    creation:
    weblogic.common.ResourceException: DataSource(jdbcthin.InventoryDB)can't be
    cr
    eated with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:35 PM EST> <Error> <JDBC> <Error during Data
    Source
    creation:
    weblogic.common.ResourceException: DataSource(weblogic.jdbc.jts.thin)can't be
    created with non-existent Pool (connection or multi) (thin)>
    <Nov 29, 2001 2:24:41 PM EST> <Notice> <Management> <Application
    Poller
    not star
    ted for production server.>
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    After the server has booted, your browser should
    automatically launch and point to the WebLogic Server
    Tour running on this server. If your browser fails to
    launch, point your browser to the URL
    "http://burtsun:7001"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    <Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <ListenThreadlistening
    on port 7001>
    <Nov 29, 2001 2:24:41 PM EST> <Notice> <WebLogicServer> <SSLListenThreadlisteni
    ng on port 7002>
    <Nov 29, 2001 2:24:42 PM EST> <Notice> <WebLogicServer> <Started
    WebLogic
    Admin
    Server "petstoreServer" for domain "petstore" running in ProductionMode>
    Could anyone please help me ?
    Thanks
    ..Madhuri
    Name: weblogic.log
    weblogic.log Type: Text Document (application/x-unknown-content-type-txtfile)
    Encoding: base64
    Name: PrintColumns.java
    PrintColumns.java Type: Visual Cafe File (application/x-unknown-content-type-VisualCafeFile.Document)
    Encoding: base64

  • Photoshop has encountered a problem with the display driver

    I rummaged around in here looking at opengl topics and others associated with the above error, but I'm not seeing what I'm encountering (or I am and I don't recognize it!).....
    I bought CS4 a week or so ago, and installed it on a system running XP32 with service pack 3, 4GB of ram withe the /3GB switch set, nVidia 8600 GT card (which according to the list is supported), and multiple spindles for images, scratch, applications, and so on. I found other topics earlier so I downloaded the most recent drivers for my video card.
    I'm not crashing and burning, but I'm getting some messages...
    I opened an image, and while working on it I wanted to do a transform/warp. I got the message that Photoshop couldn't perform the operation because there wasn't enough memory. It didn't crash but I had to shut down CS4 and restart it to do the warp.
    Most recently I opened a couple images for a panorama, and while doing the merge I got the message that "Photoshop has encountered a problem with the display driver and has temporarily disabled gpu enhancements." It tells me to check for the latest drivers - I've ALREADY got the lastest drivers. Again, no crash, just the warning. It completed the panorama.
    There have been a couple other occurrences of messages of this type, so I'm curious if there's some set of preferences or system settting I need to adjust to optimize things? I've alrady adjusted the nVidia settings because I also run Lightroom and they're having problems too.
    I've read the tech notes for the video and such and didn't find any set of optimizations there so is there a set of adjustments beyond the preferences that needs to be adjusted to improve memory and video performance? And if so, can someone point me to them.

    As I understand it (suspect at best) XP32 can address 4 gig of memory. the /3gb switch lets the applications get at 3 gig of that. If my video card takes the first 256MB, and XP is guaranteed the other 750 of the 1st gig, and in the CS4 performance preferences I should be giving it from 1462 - 1895 MB (I've given it around 1890), that leaves me with another gig or so... Is that limited to applications or can XP use it? In any case, I'm not crashing, I just get the message every so often about being out of memory. I don't recall ever seeing this with CS3, but new version, new oddities...

  • Photoshop CS5.1 Crashes Upon Opening: "Photoshop has encountered a problem with the display driver-"

    Every time I try to open photoshop I get a window that pops up and says:
    "Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements.  Check the video card manufacturer's website for the latest software.
    GPU enhancements can be enable in the Performance panel of Preferences."
    Then windows shuts the program down.  The details of the problem are:
    "Files that help describe the problem:
      C:\Users\Owner\AppData\Local\Temp\WER70AD.tmp.WERInternalMetadata.xml
      C:\Users\Owner\AppData\Local\Temp\WER9389.tmp.appcompat.txt
      C:\Users\Owner\AppData\Local\Temp\WER9407.tmp.hdmp"
    I'm on a custom Asus
    I'm using Win7 Home Premium 64-bit
    16GB RAM
    Nvidia Geforce GTX 560 2GB video card
    Intel i7 core 2.2 GHz
    12 GB of memory
    The error happens so quickly that I don't have time to do anything.  Please help.  >.<  I've been on hold for *checks phone* 2 hours exactly.  Wow.  It is a legit copy and was working last month with no trouble.  I've updated the drivers and tried a few solutions that have worked for other people that I found on Google (such as disabling CUDA and setting my "power management mode" to "prefer maximum performance" on my video card) but so far nothing has worked.
    Thanks in advance!

    It has stopped crashing because somehow it turned off "Enable GL Drawing" on its own because I could never even get a menu open.  Not sure how it did that but I am grateful.  I still get the error when I open Photoshop up but at least it hasn't crashed yet.  At the time when it was crashing I never would have been able to get you the system info due to the speed that it was crashing upon just opening the program.  In case you still need it:
    Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 8
    Processor speed: 2394 MHz
    Built-in memory: 16361 MB
    Free memory: 13322 MB
    Memory available to Photoshop: 14694 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Disabled.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: False.
    OpenGL Crash File: Detected.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 560M/PCIe/SSE2
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 560M
    Driver Version: 9.18.13.697
    Driver Date: 20121002000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1920 x 1080 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 560M
    Video Card Memory: -2047 MB
    Serial number: 92628077745082451425
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
    Temporary file path: C:\Users\Owner\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 931.4G, 511.4G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2010/12/13-23:37:10   64.449933   64.449933
       adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
       AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0  
       AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
       AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
       AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
       AdobePIP.dll   Adobe Product Improvement Program   5.5.0.1265  
       AdobeXMP.dll   Adobe XMP Core   5.0   64.140949
       AdobeXMPFiles.dll   Adobe XMP Files   5.0   64.140949
       AdobeXMPScript.dll   Adobe XMP Script   5.0   64.140949
       adobe_caps.dll   Adobe CAPS   4,0,42,0  
       adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       AFlame.dll   AFlame 2011/01/10-23:33:35   64.444140   64.444140
       AFlamingo.dll   AFlamingo 2011/01/10-23:33:35   64.436825   64.436825
       AGM.dll   AGM 2010/12/13-23:37:10   64.449933   64.449933
       ahclient.dll    AdobeHelp Dynamic Link Library   1,6,0,20  
       aif_core.dll   AIF   2.0   53.422628
       aif_ogl.dll   AIF   2.0   53.422628
       amtlib.dll   AMTLib (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       amtservices.dll   AMTServices (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
       ARE.dll   ARE 2010/12/13-23:37:10   64.449933   64.449933
       asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1  
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/01/10-23:33:35   64.436825   64.436825
       AXEDOMCore.dll   AXEDOMCore 2011/01/10-23:33:35   64.436825   64.436825
       Bib.dll   BIB 2010/12/13-23:37:10   64.449933   64.449933
       BIBUtils.dll   BIBUtils 2010/12/13-23:37:10   64.449933   64.449933
       boost_threads.dll   DVA Product   5.0.0  
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2010/12/13-23:37:10   64.449933   64.449933
       data_flow.dll   AIF   2.0   53.422628
       dvaadameve.dll   DVA Product   5.0.0  
       dvacore.dll   DVA Product   5.0.0  
       dvaui.dll   DVA Product   5.0.0  
       ExtendScript.dll   ExtendScript 2011/01/17-17:14:10   61.452840   61.452840
       FileInfo.dll   Adobe XMP FileInfo   5.0   64.140949
       icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       image_flow.dll   AIF   2.0   53.422628
       image_runtime.dll   AIF   2.0   53.422628
       JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1263  
       MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS5.1   CS5.1  
       Plugin.dll   Adobe Photoshop CS5   CS5  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   2.5.0.232  
       PSArt.dll   Adobe Photoshop CS5.1   CS5.1  
       PSViews.dll   Adobe Photoshop CS5.1   CS5.1  
       SCCore.dll   ScCore 2011/01/17-17:14:10   61.452840   61.452840
       tbb.dll   Threading Building Blocks   2, 1, 2009, 0201  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
       WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
       wu3d.dll   U3D Writer   9.3.0.113  
    Installed plug-ins:
       3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Accented Edges 12.0
       ADM 3.11x01
       Angled Strokes 12.0
       Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Bas Relief 12.0
       BMP 12.0.2
       Camera Raw 6.7
       Chalk & Charcoal 12.0
       Charcoal 12.0
       Chrome 12.0
       Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Color Halftone 12.0.2
       Colored Pencil 12.0
       CompuServe GIF 12.0.2
       Conté Crayon 12.0
       Craquelure 12.0
       Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Crop and Straighten Photos Filter 12.0.2
       Crosshatch 12.0
       Crystallize 12.0.2
       Cutout 12.0
       Dark Strokes 12.0
       De-Interlace 12.0.2
       Dicom 12.0
       Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Diffuse Glow 12.0
       Displace 12.0.2
       Dry Brush 12.0
       Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Embed Watermark 4.0
       Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Extrude 12.0.2
       FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Fibers 12.0.2
       Film Grain 12.0
       Filter Gallery 12.0
       Fresco 12.0
       Glass 12.0
       Glowing Edges 12.0
       Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Grain 12.0
       Graphic Pen 12.0
       Halftone Pattern 12.0
       HDRMergeUI 12.0
       IFF Format 12.0.2
       Ink Outlines 12.0
       JPEG 2000 2.0
       Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Lens Blur 12.0
       Lens Correction 12.0.2
       Lens Flare 12.0.2
       Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Liquify 12.0.1
       Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mezzotint 12.0.2
       Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Mosaic Tiles 12.0
       Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Neon Glow 12.0
       Note Paper 12.0
       NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Ocean Ripple 12.0
       OpenEXR 12.0.2
       Paint Daubs 12.0
       Palette Knife 12.0
       Patchwork 12.0
       Paths to Illustrator 12.0.2
       PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Photocopy 12.0
       Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Pinch 12.0.2
       Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Plaster 12.0
       Plastic Wrap 12.0
       PNG 12.0.2
       Pointillize 12.0.2
       Polar Coordinates 12.0.2
       Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Poster Edges 12.0
       Radial Blur 12.0.2
       Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Read Watermark 4.0
       Reticulation 12.0
       Ripple 12.0.2
       Rough Pastels 12.0
       Save for Web & Devices 12.0
       ScriptingSupport 12.1
       Shear 12.0.2
       Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Smart Blur 12.0.2
       Smudge Stick 12.0
       Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Spatter 12.0
       Spherize 12.0.2
       Sponge 12.0
       Sprayed Strokes 12.0
       Stained Glass 12.0
       Stamp 12.0
       Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Sumi-e 12.0
       Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Targa 12.0.2
       Texturizer 12.0
       Tiles 12.0.2
       Torn Edges 12.0
       Twirl 12.0.2
       U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Underpainting 12.0
       Vanishing Point 12.0
       Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Water Paper 12.0
       Watercolor 12.0
       Wave 12.0.2
       Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       Wind 12.0.2
       Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
       ZigZag 12.0.2
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Access CS Live
       CS Review
    Installed TWAIN devices: NONE

Maybe you are looking for

  • How do I move videos in the music file to the music video file?

    I have a bunch of music videos in the movie folder, and want to move them to the music video file below?

  • Foreign Currency Valuation posted to the wrong account.

    Dear Experts, We set account for losses or gains from exchange rate changes  for those accounts which didnt tick 'open item managment' in OBA1(Transaction : KDB). We set different accounts for foreign currencies :EUR,JPD,USD, and for the rest of the

  • Email on my phone

    Hi,  I was wondering does anyone know how to deregister your email address with the blackberry curve 8520? i registered my hotmail one and just get so much junk that its not worth it. there is not an option in my settings menu to do this, iv checked!

  • Norton Security Suite Blocking pocoxml.dll

    I did the new update today and notices my Norton Security Suite blocked this: pocoxml.dll. Identified it as : suspisious cloud.7.f Norton also quarantined this: Category: Resolved Security Risks Date & Time,Risk,Activity,Status,Recommended Action,Pat

  • Interlacing remains after pulldown removal

    Using Cinema Tools 3.1.2. I am attempting to remove the pulldown after transfer from film to video. All seems to have gone well, except... in the resulting file, there is now 1 interlaced frame every 4 frames. I used the default RevTel settings: F1-F