Performance Tuning for non Administrator users

Hi,
Since i had performance issue on my cube i have followed tutorial:
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/aggpersist/aggpersist.htm
to obtain best performance using aggregate tables.
All works, but opening NQSQuery.log i've seen that only Administrator User uses aggregate tables, and not other users. In fact:
Administrator User:
WITH
SAWITH0 AS (select sum(T209.SPESA_PRES0000004A) as c1,
T202.Sesso00000057 as c2
from
SA_Nominat00000090 T202, (Aggregated table)
ag_Fatti T209 (Aggregated table)
where ( T202.Nominativo0000005F = T209.Nominativo0000005F )
group by T202.Sesso00000057)
select distinct SAWITH0.c2 as c1,
SAWITH0.c1 as c2
from
SAWITH0
Other user:
WITH
SAWITH0 AS (select sum(T32.SPESA_PRESCRITTA) as c1,
T32.ASSISTITO__SESSO_LVLDSC as c2,
T32.TEMPO_DIM_ANNO_LVLDSC as c3
from
STORDO_CUBE_CUBEVIEW T32
where ( T32.TEMPO_DIM_LEVEL = 'ANNO' and T32.ASSISTITO__LEVEL = 'SESSO' )
group by T32.TEMPO_DIM_ANNO_LVLDSC, T32.ASSISTITO__SESSO_LVLDSC)
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c1 as c3
from
SAWITH0
How can I do to obtain a query similar even for a non Administrator User?
However, in your opinion, to have a TOTAL level for all dimensions, can me help to improve performances?
p.s. In addition, aggregate measure value is wrong. It's 900, but it must be 300, infact the total of all rows in fact table is 300 and not 900. In this way, even the report result is wrong!!! Why?
Thanks
Giancarlo
Edited by: user5380662 on 10-mag-2010 4.44
Edited by: user5380662 on 10-mag-2010 5.47

Hi daqstudent,
What versions of Windows (with service packs), LabVIEW, and the DAQmx
drivers do you have? It looks like this issue should have been
fixed in DAQmx version 7.4. As a work-around, you should be able
to use the Measurement & Automation Explorer (MAX) to create
DAQmx Global Channels, and then use those saved Global Channels in LabVIEW. The
configuration for DAQmx Global Channels in MAX is the same as that of
the DAQ Assistant in LabVIEW. The only experience lost is seeing the
actual DAQ Assistant icon in LabVIEW.
Thaison V

Similar Messages

MacOSX AIR Permissions for non-administrator user folders

We're making final changes to our installer for PowerPC Macs, which cannot get the fixes in Adobe AIR 2.7.
What are the ownership AND permissions expected to be for normal Adobe AIR operation in the following user folders?
~/Library/Application Support/Adobe/AIR
~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/
/Users/Shared/Library/Application Support/Adobe
We would like to know if it is advisable to apply the permissions fixes to user folders other than those under the administrator user. Neither the AIR Install Repair.zip posted on the forums nor the MacOSX Adobe AIR 2.7 Installer logs show that any user folders other than those under the administrator user are modified.
Thanks for your advice.

Hi,
I don't believe you'll need to make adjustments to these folders. Here's what mine are set to:
/Users/chris/Library/Application Support/Adobe/AIR
755 / owner:chris group:chris
/Users/chris/Library/Preferences/Macromedia/Flash Player/www.macromedia.com
755 / owner:chris group:chris
/Users/Shared/Library/Application Support/Adobe
755 / owner:chris group:wheel
Fwiw, the reason we had to fix up permissions was due to beta versions of past Creative Suite installers (the shipping installers were corrected.) As far as I know, the only folders effected were the ones we corrected in the installer and I addressed in the script.
Thanks,
Chris

How to hide the page ribbon and quichlaunch for non admin users

HI
1 ) how to hide the ribbon in a page in sharepoint 2010 for non administrator users
2) how to hide quicklaunch also for non admin users
in quick lanuch i want to hide links for all site content also.
i used Document Center Template to create my web application.
adil

HI
i did not get how i use this control
<Sharepoint:SPSecurityTrimmedControl
runat="server"
PermissionsString="FullMask">
2
  <div>
3
    <SharePoint:SPLinkButton
id="idNavLinkViewAll"
runat="server"
NavigateUrl="~site/_layouts/viewlsts.aspx"
Text="<%$Resources:wss,quiklnch_allcontent%>" AccessKey="<%$Resources:wss,quiklnch_allcontent_AK%>"/>
4
  </div>
5
</SharePoint:SPSecurityTrimmedControl>
adil

SQL tab not working in V2.1 EA1 for non-DBA users -- how to fix?

In v2.1 EA 1 the tab to show the SQL script (DDL) in the object browser is not working for non-DBA users. In the prior version, these users would see a message about DBMS_METADATA and then the message would indicate that an "internal generator" would be used to generate the DDL script. After that brief message the DDL would show up as expected. This doesn't seem to be the case in the newest version.
I issued the following two grants to a particular user which worked, but I am reluctant to issue the grants to "PUBLIC".
SQL> grant execute on DBMS_METADATA to XXXXX;
SQL> grant select_catalog_role to XXXXX;
So, my questions are:
1) Will the old functionality (that didn't require these privileges) be added to V2 at some point?
2) What security implications are there for issueing the above grants to PUBLIC?
NOTE: After granting execute on the DBMS_METADATA package, it still didn't work. I left that grant in place and granted SELECT_CATAOG_ROLE, so I can't say for sure that the 1st grant was required.
Edited by: user615070 on Nov 19, 2009 9:30 AM
Edited by: user615070 on Nov 19, 2009 10:06 AM

An OEM account is separate from the database account. You need to use OEM UI to create an OEM account, however, for certain tasks to be done in the databases which OEM is monitoring they will also require separate database accounts within those databases. For example, to view the performance tab in OEM UI, a database account is required.
OEM only has two types of users, i.e. Super Administrator and Administrator, but don't go by the names. You can grant an OEM 'Administrator' account access to specific targets and what they can do within OEM, such as only viewing reports, targets, and so on. For access within a database, the user created need not be a DBA either.
I hope you understand.

Allow a windows non-administrator user to run cmd.exe as administrator without sharing administrator password with the user

I have standalone Windows 2003 and 2008 Oracle database servers (they are not in a Windows domain environment ). The Oracle DBAs can perform all their routine activities from command line with administrator privileges. For this i've to either share administrator
user password with the Oracle DBAs or add their windows login user to Administrators group. If i can give the DBA user permission to run windows command prompt without sharing administrator password, i can give them non-administrator login access to Windows
2003/2008 server. Normally when a non administrator user would try to run a program as administrator on Windows 2008, the user is prompted to input administrator username/password. Is it possible to give non-admin user access to run a program/application (cmd.exe
in this case) on Windows 2003/2008 without sharing administrator credentials with them?

With the OTORISER application I developed, normal users can run applications with admin privilege …
Otoriser is totally free ! Applications, mmc consoles, control panel cpl files can be run under admin and system context with Otoriser. Let’s say you donot want your users to be admin in their machines, but want them to run some applications with admin rights.
If this is the case then you are on the right blog.
There are two components for Otoriser. Management and client components. There are no complex implementation and no frustrating steps to be performed. Within 10 minutes you can start testing the results
After you download the setup files, install client components in the client by running it directly (or any deployment method you have), it will take about 5 seconds to install it. Then, let’s say you want your user to change system properties of the machine.
With the tool provided in Admin package produce the hash of system.cpl file and enter that hash into the group policy (details are provided in documentation). When policies are applied for that user then he or she can run that control panel applet under admin
context but donot forget that the user is still an ordinary user.
download link :
http://burakuysaler.wordpress.com/2013/02/21/with-the-otoriser-application-that-i-developed-normal-users-can-run-applications-with-admin-priviledges

User Interface Access Customisation for non admin users

Hi,
It is understood that for non-admin users, some features of the Planning Interface is not enabled and this can be controlled by proper access permissions. But, is it possible to extend the customization to provide some additional features in the menu bar for an user?
For example, if View User wants to manage task lists. Is it possible by some sort of customization? Please advise.
Thanks.

Hi,
You can create right click menus, and you can also create links on the tools page. Would any of these help you?
Here is the doc on those subjects:
Creating and Updating MenusAdministrators can create right-click menus and associate them with data forms, enabling users to click rows or columns in data forms and select menu items to:
Launch another application, URL, or business rule, with or without runtime prompts
Move to another data form
Move to Manage Approvals with a predefined scenario and version
The context of the right-click is relayed to the next action: the POV and the Page, the member the user clicked on, the members to the left (for rows), or above (for columns).
When designing data forms, use Other Options to select menus available for Data Form menu item types. As you update applications, update the appropriate menus. For example, if you delete a business rule referenced by a menu, remove it from the menu.
To create, edit, or delete menus:
Select Administration, then Manage, then Menus.
Perform one action:
To create a menu, click Create, enter the menu's name, and click OK.
To change a menu, select it and click Edit.
To delete menus, select them, click Delete, and click OK.>
Specifying Custom ToolsAdministrators can specify custom tools, or links, for users on the Tools page. Users having access to links can click links from the Tools menu to open pages in secondary browser windows.
To specify custom tools:
Select Administration, then Application, then Settings.
For Show, select Advanced Settings.
Click Go.
Select Custom Tools.
For each link:
For Name, enter the displayed link name.
For URL, enter a fully qualified URL, including the http:// prefix
For User Type, select which users can access the link.
Click Save.

How to allow access to winrs for non-admin user?

I have Windows Server 2012 (and Server 2008, but it is next priority) to monitor it using txwinrm. txwinrm library internally is using WinRS protocol. I have to monitor it using least privileged user, but don't know how to configure access for him.
All I managed to do - is to configure remote Powershell session for my user, but it's look like that winrs and powershell sessions have different security descriptors:
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential Administrator $pwd) -ScriptBlock { 2 + 2}
# gives 4
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential lpu1 $pwd) -ScriptBlock { 2 + 2}
# gives 4
winrs -r:192.168.173.206 -u:Administrator -p:$pwd 'powershell -command "2+2"'
# gives 4
winrs -r:192.168.173.206 -u:lpu1 -p:$pwd 'powershell -command "2+2"'
# Gives Winrs error: Access is denied.
Configuration for my user is following:
(Get-Item WSMan:\localhost\Service\RootSDDL).value
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1141)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)
(Get-PSSessionConfiguration -name Microsoft.Powershell).SecurityDescriptorSddl
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1149)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
(In each security descriptor my user is given general access to protected object).
So what security descriptor should I set to make my winrs query work for non-admin user?

Hi Bunyk,
I can not recreate the erroe you posted, and please also post the screenshoot in your convenience.
I tested with a non-domain user but has the local admin permission of the remote computer, and this worked, before running the remote cmdlet in powershell, I also configured the TrustedHosts.
In addition, the access denied could be also caused to the Protocol Filtering on the remote server, for more detailed information, please refer to this thread:
winrs error:access is denied
I hope this helps.

App is getting damaged when I replace it as non-administrative user

Hey people,
When I want to update e.g. VLC Player, as an administrator, it is simple: I just download the dmg, mount it and drop the new version of the VLC.app into the Applications folder to replace the old VLC.app. Few days ago I created a new admin account and changed my old account to normal user. If I want to install new software that I did not use before, everything works as expected: when I drop an .app package into the Applications folder, I need to type in the admin login and password to allow this operation, then the package will be copied and I can start the new app.
My problem:
If I want to update the software by replacing the app as non-administrative user, the system first will promt me to keep both files, replace an older one or to stop - so far so good. BUT, when I select to replace, the copying process actually begins before the administrator prompt and it results in corrupted file. I also tried to create a new user account. So then I need first to remove the broken app (admin prompt once again) and then to install the new one (3rd admin prompt).
I attached some screenshots to visualize the issue. I have the same issue on two different macs with different user/admin names. I hope you have any idea how can it be fixed.
1. I download the package:
2. Mount the package:
3. Drag the VLC app to the Applications folder (selecting >Authenticate in the prompt)
4. Copy prompt (>Replace):
5. Authenticate with administrative user
6. Error message:
7. Corrupted file:

Thanks, you helped me. I had gotten hung up on '--user = <vboxuser>' in the ExecStart line, which works for one of my other services, but not this one.

Performance Tuning for BAM 11G

Hi All
Can anyone guide me for any documents or any tips realted to performance tuning for BAM 11G on on Linux

It would help to know if you have any specific issue. There are number of tweaks all they way from DB to Browser.
Few key things to follow:
1. Make sure you create index on DO. If there are too much old data in the DO and not useful then periodically delete it. Similar to relational database indexes, defining indexes in Oracle BAM creates and maintains an ordered list of data object elements for fast retrieval.
2. Ensure that IE setup to do automatic caching. This will help with reducing server round trips.
3. Tune DB performance. This would typically require DBA. Identify the SQL statements most likely to be causing the waits by looking at
the drilldown Top SQL Statements Ordered by Wait Time. Use SQL Analyze, EXPLAIN PLAN, or the tkprof utility to tune the queries that were identified.
Check the Dataobject tables involved in the query for missing indexes.
4. Use batching (this is on by default for most cases)
5. Fast network
6. Use profilers to look at machine load/cpu usage and distribute components on different boxes if needed.
7. Use better server AND client hardware. BAM dashboard are heavy users of ajax/javascript logic on the client

Can't install add-in for non-administrator

Hello all,
I'm having trouble getting the Adobe Connect add-in installed under a non-administrator user's account. I found a successful method of installing it in this thread, but that method is no longer working for me. As the forum in question is currently down, I'll paste the post below:
I know this is an old thread, but we recently had this issue. Our users do not have the ability to install software, and using admin credentials at the UAC prompt installed it in the admin's profile, instead of the user's.
Here's how we solved it and made it per computer on Vista SP2. All without turning UAC off.
1) Log in as an admin and install the Connect Add-In.
2) Browse to the plug-in directory; directory should contain 1 .exe and 1 .s. **Note, there is a space in ...\Flash Player\...**
C:\users\%your_admin_account%\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\connectaddin6x5\
3) Run the connectaddin6x5.exe file, which will create 2 .dll files. It will also launch a window, which is okay to close after the 2 .dll files have been created.
4) Copy "\www.macromedia.com\bin\connectaddin6x5\*.*" to a central location for easier access.
5) Copy "\www.macromedia.com\bin\connectaddin6x5\*.*" to c:\users\default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\connectaddin6x5\*.*
**When any new user to the system logs in and their profile is generated, this will include the Connect Add-In plugin
6) For users who already have a profile, we created a simple .bat script to xcopy the directory structure and files created in Step 4 to "C:\Users\%UserProfile%\AppData\Roaming\Macromedia\Flash Player\"
7) Have the user run the script once and the plug in will be installed for the user.
8) Log in to/Refresh the meeting.
I hope this helps. If there's a better way to do this without disabling UAC, I'm interested. Or maybe an MSI to push with GPO. Or even a Setup.exe that can be run with User privileges. But with 10-15 users per computer and 100+ computers, this was our best solution.
Evan Franklin
Field Service Engineer, SAIC
The computer that I used this method on had the add-in working fine until a few days ago, when the add-in stopped being recognized. Repeating the process yielded no results. When installed as an administrator it works fine, and launching the browser under administrator credentials allows the add-in to run, but this is not an acceptable solution for the long-term.
Any help would be much appreciated.

Having the same problem has anyone come up with a fix yet?
Since the connect 9 update to our hosted account we can no longer use in the connect add-in for meetings. we lose all the screen sharing option that we once had working fine.

Acrobat 7 requires admin password at every launch for non admin users?

acrobat 7 requires admin password at every launch for non admin users?
any one with a solution or similar problem?
thanks for any help.

I've been avidly following all of the threads regarding this issue...yet none of the solutions have worked for me. I've got 11 Mac users that do not use the Creative Suite..only Acrobat, Quark, etc. I've tried installing and re-installing through both Admin and User accounts, I've tried the AdobeBib XML change, I've tried enabling Root and installing, changing permission on the Acrobat folder, etc. all to no avail. I still get asked for Admin Authentication every time Acrobat and Distiller are opened (except on the Admin account side). This is happening on one particular Mac (G4, 1GB Ram, OS 10.4.3) for both Acrobat Standard 6 and 7 as well. The biggest issue that also happens in tandem with the Acrobat installs is the inability to print from Quark. I get the following error when printing: "The process "pictwpstops" terminated unexpectedly on signal 6." Because of the necessity to print Quark documents, I have uninstalled all Acrobat on the machines until we can get a fix. This resolves the printing problem with Quark. The only option left is to set up all users as Admin accounts - which I really do not want to do. Any other suggestions out there? I've got more information available if needed.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

Can I burn photos onto a DVD/CD for non-Mac users?

Can I burn photos onto a DVD/CD for non-Mac users?

You can burn a plain CD/DVD by just dragging the photos there; but, that may or may not be playable by everyone. To be sure that the result would be playable in any computer or CD/DVD player, it would be better to use either one of the apps already on your system - such as iPhoto. I don't use that myself - I use other third party software - but take a look at iPhoto help. And, you could make it more interesting by creating a slideshow - also in iPhoto, or iMovie. To give it the final cool touch, bring it into iDVD to give it a polished look if you'd like. You can burn it then from any of the above.
If you happen to have Toast (an excellent burning app), you could use that as well (that is my preferred way to work). In Toast, you have multiple choices: burn a data CD/DVD for Mac only, for Mac & PC, etc, burn a picture CD, video DVD, etc, etc.

What are the steps doing a performance tuning for pertcular program

What are the steps doing a performance tuning for pertcular program

chk this link
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
checkout these links:
www.sapgenie.com/abap/performance.htm
www.sap-img.com/abap/ performance-tuning-for-data-selection-statement.htm
www.thespot4sap.com/Articles/ SAPABAPPerformanceTuning_Introduction.asp
Message was edited by: Chandrasekhar Jagarlamudi

Performance Tuning for Concurrent Reports

Hi,
Can you help me with Performance Tuning for Concurrent Reports/Requests ?
It was running fine but suddenly running slow.
Request Name : Participation Process: Compensation program

What is your application release?
Please see if (Performance Issues With Participation Process: Compensation Workbench [ID 389979.1]) is applicable.
To enable trace/debug, please see (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1] -- 5. How does one enable trace for a concurrent program INCLUDING bind variables and waits?).
Thanks,
Hussein

Performance Tuning for non Administrator users

Similar Messages

Maybe you are looking for