PERFORMANCE while accessing remote database DB2 on AS/400 using WAS

Subject: PERFORMANCE while accessing remote database
We have IBMWebSphere Application Server Standard Edition 3.5.3 running on
AS/400 iSeries Server (V4R5, test)and local DB2 Database.
I am using AS/400 Developer Kit for Java JDBC Driver(type2, com.ibm.db2.jdbc.app.DB2Driver)
to talk to local database. The performance was very good.
When I try to access remote database (every thing same as local) which is on another AS/400
machine of V4R4 (we use it for production, remote database) using IBM Toolbox for Java JDBC driver
(com.ibm.as400.access.AS400JDBCDriver, type 4 driver), I can see 30to40%decrease in performance.
Here we have WAS on previous V4R5 AS/400 machine.
My questions are
Is the performance decrease is due to
1. the driver I am using? if it is Is there any other alternative drivers to access
remote database to boost performance?
2. the release difference of local(V4R5) and remote data base(V4R5)
3. Currently most uses remote database while we do this testing. Is that the cause?
or Is there any other cause or Drivers etc??? Suggestions and help is most welcome.
Thank you.

What about
4. the data has to travel across the network.

Similar Messages

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

WebSphere V5 accessing remote database

Hi.
Sorry to post IBM product specifice question here. I didn't know where else to put it.
I need to deploy J2EE appl using CMP beans to WebSphere Application Server version5 to use remote database(DB2) within LAN.
I have no idea to where to begin and what to look for.
Can anyone guide me here?

You need to configure that database as a data source in Websphere using the admin tool. Check the help for details.

How to access remote database using applet

hi all,
I want to know how to access remote database using applet,
Please help me anybody.
Regards
Jesu

If the database is on a public server, you probably can't access it directly (security wise). You can make your applet talk to a server-side application, which makes the database calls on behalf of the applet. But even in an intranet environment this setup is often preferable, because you don't need to distribute a JDBC driver to all your clients.

Applet in JDK 1.1 accessing remote database

Hi,
I'm trying to make an Applet access a remote Oracle Database using Jdbc thin driver. The database and the Web Server are in deferent machines. The browser i'm using is Internet Explorer. But I always get the followin exception:
Cannot access "remote-machine" at com/ms/security/premissions/NetIOPermissionCheck.
How can I solve that?
Thank you,
Nei

Another interesting thing is, the applet ( jar) that is signed will display the security dialog if I connect from a client that has java plugin 1.4 ( jsdk 1.4) or if I copy it and run it on a j2sdk1.4 machine. I checked the java.policy files on both 1.3.1 machine and 1.4.1 and they are the same.
TIA
Krishna

Access remote database in desktop application

Hi friends,
I am developing an desktop appication in that I have to access the data reside in another machine.
how can do this through java.
how to set url for this.
since normally we will use the jdbc:odbc:......
for access remote machine database.
plz give the procedure in brief.
Raj with reg.

What?
It all depends on what database you are using, and which driver you are using.
Please google on jdbc and your database name.
Kaj

Error while accessing remote server using applet in jsp page

hii..
We are accessing a data repository MDSPlus. Its used for storing data such as signals in tree like structure. We r coding for client side in JSP .
For this we are invoking applet which uses jar files of jScope(java tool for displaying waveforms). We r getting the following error when we try to access a remote server in network. But it works fine with local server.
So kindly help .
ERROR IS:
java.security.AccessControlException:access denied(java.net.SocketPermission 202.41.112.140:8000 connect,resolve)
url mds:://202.41.112.140/SST_DAQ/11/\SST_DAQ::TOP.BOLOMETER:BOLO_1
Use ploicytool.exe in JDK or JRE installation directory to add socket access permission.
The IP address mentioned above in error is the computer with which v have to connect. SST_DAQ is the expt name,11 is the shot no. , BOLOMETER and BOLO_1 are the tree node s..
plzz reply fast........

Hi Frank,
Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
Ensure the case of the JNDI lookup string, since, it is case sensitive.
Hope this helps.
Abhijeet

Unable to access remote database object using database link

Hi all,
I have created a database link to a remote server
SQL> create database link remote_link connect to lax_dba identified by lax_dba using 'abc.corp.com';
database link created
when i am trying to access any table of lax_dba
sql> select * from laxtab@remote_link;
i am getting this Ora error
ORA-12514: TNS:listener does not currently know of service requested in connect
I need your help please to solve this issue
Thanks n Regards
Laxman

The database server where you defined the link (not your PC) has resolved 'abc.corp.com' to a server/port/service combination using its tnsnames.ora, sqlnet.ora and possibly ldap.ora settings. You can try
tnsping abc.corp.comon the server (as ReubenC suggested) to see what it's attempting to connect to. (It's important to do this on the database server and not on your PC as they will have different tns settings etc.)
It has then found the server and found a listener running on it (so you're getting close), but that remote listener doesn't recognise the service you're asking for. It might be something like the '.com' suffix.

Heterogeneous Services failure on accessing remote database under XP

Hi All,
I can set up HS.
My problem is, that it works only when the datasource is sitting on serverside.
If I try to connect to a database what is sitting on a remote machine HS does not want to find it. Even if I using mapped drive, or \\server\shared_folder or novell directory tree.
Even if also using CONNECT TO "MyUserName" IDENTIFIED by "MyPassword" which have full access to the folder of the remote machine.
Could you please help me?
[email protected]

What do you mean by that? What kind of network files?
Again my situation in details:
Case A - sais, I can handle HS, where it points to a file sits on localhost.
Case B,C,D,E - sais, 10g can not see the file via ODBC with my settings.
- Case A
PARTNER.DBF can be found in C:\
ODBC point to this file.
10g can make the database connection activate.
I can see the table, everything is okay.
- Case B
PARTNER.DBF can be found in K:\
where K: is a mapped drive on the Microsoft Network. It is a shared directory. Shared for read and write. And I have these rights.
ODBC point to this file.
10g can NOT make the database connection activate.
I can NOT see the table. "Unknown path" it sais.
- Case C
PARTNER.DBF can be found in L:\
where L: is a mapped drive on the Novell NDS tree. It is a shared directory. Shared for read and write. And I have these rights.
ODBC point to this file.
10g can NOT make the database connection activate.
I can NOT see the table. "Unknown path" it sais.
- Case D
PARTNER.DBF can be found at \\my_collegaue's_machine\shared_dir\
I have rights to the file.
ODBC point to this file.
10g can NOT make the database connection activate.
I can NOT see the table. "Unknown path" it sais.
- Case E
PARTNER.DBF can be found in \\Hh\.FS2_USZ.HLT\HPRG\DATA
I have rights to the file.
ODBC point to this file.
10g can NOT make the database connection activate.
I can NOT see the table. "Unknown path" it sais.
So what should I chage in 10g settings?
What changes should I make?
What kind of command should I type?
Please help and be a little more specific.
Thx in advance.
Andrew
[email protected]

DB Connect Error while establishing secondary Database DB2 in mainframe sys

Hello,
I am trying to establish a secondary database connection between my ECC system and a mainframe system.
In my SAP system, the database is Oracle and version is 10.2
I want to connect to a mainframe system DB2 (AS400).
I have installed DB2 client in SAP server.
I have checked the access to Mainframe system from DB2 client.
I have made the entry in DBCON table via t-code DBCO, which looks like this
AS4_HOST=<ip_address>;AS4_DB_LIBRARY=<LIB_NAME>;
But when I run, the std program ABCD_TEST_CONNECTION, I am getting error
Secondary DB connect FAILED!
Some doubts:
1) From an Oracle Database point, is it required to login to sqlplus and create a database link between Oracle Database and the Mainframe Database?
2) Is it required to have an entry in SM59, which connects the Mainframe system, if so what type of connection & name?
3) If anyone has faced situation like this, can you share what steps were taken to resolve the error?
If this is not the forum to post this question, can you suggest the correct forum?
Regards,
Vikas

Hello Prem,
I have established connectivity with Mainframe via DB-Connect.
THe steps are
1) Make entry in DBCON table
2) Install DB2 client in SAP-Server
3) There are some jobs which needs to be run in Mainframe system. The job name was mentioned in one of SAP notes.
If you are facing problems after this, just check SAP version and patch installed.
Regards,
Vikas

JDeveloper embedded OC4J accessing remote database

How do I configure the embedded OC4J JNDI w/JDBC to use a local TNSNames.ora file setting to connect to a remote 9i database?

You might want to consult the OC4J admin guide.
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/adminclient.htm#CHDCFBIH
For the embedded OC4J you can access datasource settings through tools->Embedded OC4J preferences.

Error while accessing HANA-Database

Hi all,
I try to access the HANA-database (installed as secondary database).
The table is replicated in HANA and I have created a program in ERP with the following procedure:
SELECT * FROM [table]
CONNECTION ('HANADB')
INTO lt_table.
HANADB is the database connection name for HANA (table DBCON).
By running the program I become the following error:
The file "dbhdbslib.dll" is already in the folder "C:\usr\sap\IS0\DVEBMGS00\exe\". Any idea what is missing?
Thx for help, mlf.

Hi Jasmin,
the program ADBC_TEST_CONNECTION gives the following error:
But I can't open the trace file.
Do you know what is meaning with error 16?
I'm not the System admin but I can ask him to check on OS level.
Cheers, mlf

How to get the best possible performance when accessing remote files

Hello,
I have recently set up a VPN to allow remote access to an MYOB data file hosted on my Mac Mini at home (MYOB is an accountancy software package for Mac and PC).
My Mac Mini is connected to the internet over a standard ADSL home broadband line, with a terrible upload speed. I think my ISP (BT) quotes 512k upload and up to 8 Meg download. Needless to say, access to the data file is sluggish at best.
Can anybody recommend a better way to host the data file?
I am aware of lots of 'free file hosting' services, a quick Google search brings up loads, but I need to actually open and run the file from its remote location. I cannot download and then upload again because we have multiple user access, and need to ensure the file on the server is not being edited by two people at once.
Thanks for your help...

Thanks for both of your answers.
*Amazon S3 Option*
I preferred the Amazon S-3 option for ease of use and setup, but this does not appear to work. The software accesses the file very quickly indeed, which is great, but I think due to the connection protocol the network volume reports 'zero' disk space remaining.
The MYOB application does not like this, so pops up an error message saying it needs at least '200kb of disk space to open'. This is because, upon opening, it writes a couple of 'lock' files to the disk where the data file is stored.
My previous solution with the Mac Mini used VPN to connect, thus allowing SMB shares for windows users and AFP shares for Mac, and when mounted these network volumes would report the remaining disk space of the Mac Mini itself. MYOB liked this.
Is there any way I can get the network share to report something other than zero disk space remaining?
*Dedicated Server Option*
Otherwise, the VPS option sounds very affordable. I am however unfamiliar with the world of dedicated servers and the Ubuntu OS, but surprised they are so affordable. I would rather go this route than change my home ISP.
Firstly I have never used Linux or typed anything into the command line. So, will I be able to use VNC to access the VPS?
Second, to access the data file, should I continue to use VPN? My current VPN server software supports Linux, so can I use this on Ubuntu?
Thanks again..

Get ORA-12560 error while accessing 11g database

Database version: 11.2.0.1.0
This is a development database running on CentOS. We had setup this database recently and everything has been fine. Today I noticed that when I connect to the database from remote, I get the following error -
ORA-12560: TNS:protocol adapter error
I'm able to get in to the database after logging in directly into the database server via putty. I have stopped & restarted the database, but with no help. I have checked the environment variables (ORACLE_HOME, ORACLE_SID) and they seem to be fine.
Can you please help on what might be the problem here? Is this something to do with some change in the OS firewall setting?
Edited by: museshad on Dec 20, 2012 12:44 PM

lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-DEC-2012 13:27:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                27-AUG-2012 16:50:42
Uptime                    114 days 20 hr. 37 min. 13 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/xxxx/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxx)(PORT=1521)))
Services Summary...
Service "orcl.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
listener.ora
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
tnsnames.ora
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.ENTERPRISENET.ORG)
)

Dump while accessing remote cube

I have a remote cube on a r/3 function module.
While doing listcube on the remote cube I get following error:
System error: Message type   is unknown.
Error reading the data of InfoProvider
In R/3 error dump analysis gives the following:
Only message types A, E, I, W, S and X are allowed.
There is probably an error in the program "GP45R68OC5AE7889UWEDQJN1THJ".
MESSAGE_TYPE_UNKNOWN
Does anyone have experience to handle similar situation? Any suggestion for the next step?

This is a standard function module: FAGL_GET_TT_DATA_LEAD
Import Parameters:
I_REQUNR
I_ISOURCE
I_MAXSIZE
I_INITFLAG
I_UPDMODE
I_DATAPAKID
I_PRIVATE_MODE
I_CALLMODE
I_NO_AGGREGATION
Table Parameters:
I_T_SELECT
I_T_FIELDS
E_T_DATA
E_T_SELECT
There is no export paramters

PERFORMANCE while accessing remote database DB2 on AS/400 using WAS

Similar Messages

Maybe you are looking for