Performmance in ADRC and KNA1 Data Fetching

Hi,
In My report,
I have S_FLOOR as secet-option which is type ADRC-FLOOR.
I want to get Addressnumber based on FLOOR from ADRC and Based on ADRESSNUMBER I want to fetch Kunnr, Name1, Name2 etc from KNA1.
But as Addressnumber is not the primary key of KNA1, its taking too much time.
I am using for all entries, then also taking more time.
how can I improve the performance.
I cant fetch KNA1 data first as there is arourd 4 Lacs of record.
Can any body suggest me ?
Thanks
Kumar

Hi Kumar,
There will be more entries in adrc when compare to kna1 table. first you neeed to fetch customer details from kna1 either using indexing or not. then match adress number with adrc table.
and also use the customer account group field kna1-ktokd to restrict the no of entries.
Kna1 table won't make much performance issue.
Regards,
Ravi.

Similar Messages

SAP CRM Tables and Fields for Contract start and End dates

Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja

correction
10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev
Tweet
SAP CRM Tables and Fields for Contract start and End dates
This question has been Answered.
Teja Dhar 12 Oct, 2009 8:03 PM
Currently Being Moderated
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja
Correct Answer by Sreekantha Gorla on Oct 22, 2009 8:22 PM
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
<:footer>See the answer in context
6281 Views
Topics: Customer Relationship Management
Reply
Average User Rating
0
(0 ratings)
My Rating:
Rating Saved!
Comment on your rating
Re: SAP CRM Tables and Fields for Contract start and End dates
Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
There is something in table SCAPPT and SCGENAPPT.
Regards, R
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)
Currently Being Moderated
    Hi Robert,
I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
Table SCAPPTSEG stores the contract start and end dates.
Thanks,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi Sreekanth,
I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi,
I can tell you where the pricing records are saved, replicated from ECC.
The data from ECC table Axxx (e.g. A304) is replicated to CRM table
CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
What might help is to execute program "CRM_ORDER_READ". Here you can find
the relevant entries also.
regards,
Wim
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Experts,
Thanks a lot for your support.My problem got resolved.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Teja
Please let me know how you got the dates. i got the same requirement
Report Abuse
Like (0)
Reply
Correction on above mail.
Hi Sanjay,
Can you please help me to find the contract st art date and end date fetching from the table as below
ITEM DATES:
Select guid_set from table CRMD_LINK where guid_hi              = CRMD_ORDER_I-GUID AND
                                                                          OBJTYPE_HI     = '06'
                                                                          OBJTYPE_SET = '30'.
Select * from SCAPPTSEG where APPL_GUID = guid_set.
as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
pls suggest further on same
regards
Arora

Query on fetching the no.of days between Invoice date and due date in rtf template embedded BI Publisher Report

Hi Experts,
We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
Please let me know the procedure of how to achieve the same.
Regards,
Rev

it's good for ideas but implementation a bit different
Oracle Business Intelligence Publisher Report Designer's Guide
This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
<?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
where
format is the time value for which the difference is to be calculated
Example:
<?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
returns
-7

How to fetch APPROVER NAME and approval date dynamically for an user

Hi all..
How to fetch approver name and approval date dynamicall for an user in an email template..
can any help me to sort out this pbm,i am new to IDM..
Thanks in advance..

Access policies get a static value. You can't populate a field with an adapter. If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
-Kevin

Data fetch from table without Refresh and without using tab key.

hi Friends,
I have a problem i want to extract data from table without Refresh into text field without using Tab key. when i'll enter any value in a text field then corressponding value should come in to corressponding textfield without using Tab Key.
eg. when i enter emp_id 101 in a text field then the first_name and last_name ,adress should come in to corressponding text fields without refresh and without using Tab key.
How Can I do this.
Thanks
Manoj

Hi Manoj,
I assume that this is similar to: Data fetch without Refresh rather than Re: Value of one textfield should come into another textfield Without Using TAB ?
If so, the only change you need to make on the first one is to use "onkeyup" instead of "onchange" in the item's "HTML Form Element Attributes" setting.
Note, however, that the user must move away from the item at some point (for example, to click a button), so the onchange will be triggered anyway.
Andy

Invoice date and Cancel date

Hi ,
How to get invoice date and cancellation date of a sales order.
My requirement is like this: .... i have to list out all the open orders for a particular date, for example today.
For this i need to display sales orders with any status as well as invoiced and cancelled orders which fall under that particular date.
Hope it's clear.
Regards
Sreenivasa Reddy v.

okay here is a sample code to find the open sales orders for a customer and sales area.
just execute the code and see this is fetch ing the open orders .
<b>now for ur logic enhance the code with date in the select statements so that u will capture the open orders with in the range .</b>
regards,
vijay
REPORT ZEX2 MESSAGE-ID arc NO STANDARD PAGE HEADING.
Tables :kna1,vbak.
SELECT-OPTIONS : so_vkorg FOR vbak-vkorg OBLIGATORY,
                 so_vtweg FOR vbak-vtweg OBLIGATORY,
                 so_spart FOR vbak-spart,
                 so_kunnr FOR kna1-kunnr.
DATA : BEGIN OF sales_open OCCURS 0 ,
       vbeln LIKE vbak-vbeln,
       auart LIKE vbak-auart,
       kunnr LIKE kna1-kunnr,
       bstnk LIKE vbak-bstnk,
       lfstk LIKE vbuk-lfstk,
       fkstk LIKE vbuk-fkstk,
       gbstk LIKE vbuk-gbstk,
       END OF sales_open.
DATA : BEGIN OF itm_sales OCCURS 0,
       vbeln LIKE vbap-vbeln,
       posnr LIKE vbap-posnr,
       matnr LIKE vbap-matnr,
       kwmeng like vbap-kwmeng,
       lfsta LIKE vbup-lfsta,
       lfgsa LIKE vbup-lfgsa,
       fksta LIKE vbup-fksta,
       fksaa LIKE vbup-fksaa,
       gbsta LIKE vbup-gbsta,
       END OF itm_sales.
DATA : l_kunnr LIKE kna1-kunnr,
       l_vkorg LIKE vbak-vkorg,
       l_vtweg LIKE vbak-vtweg,
       l_spart LIKE vbak-spart.
DATA: v_statusl(20) TYPE c,
      v_statusb(20) TYPE c,
      v_statusf(20) TYPE c,
      v_statusg(20) TYPE c,
      v_status(20) TYPE c,
      v_field(1) TYPE c.
data : v_openqty like vbap-kwmeng.
**Selection Screen Validations.
AT SELECTION-SCREEN.
PERFORM validations.
*&      Form Validations
*       text
* --> p1        text
* <-- p2        text
FORM validations.
**Customer
IF NOT so_kunnr[] IS INITIAL.
    SELECT SINGLE kunnr INTO l_kunnr
           FROM kna1
           WHERE kunnr IN so_kunnr.
    IF sy-subrc NE 0.
      MESSAGE e002 WITH text-005.
    ENDIF.
ENDIF.
**Sales Organization
IF NOT so_vkorg[] IS INITIAL.
    SELECT SINGLE vkorg INTO l_vkorg
           FROM tvko
           WHERE vkorg IN so_vkorg.
    IF sy-subrc NE 0.
      MESSAGE e003 WITH text-006.
    ENDIF.
ENDIF.
**Distribution Channel
IF NOT so_vtweg[] IS INITIAL.
    SELECT SINGLE vtweg INTO l_vtweg
            FROM tvkov
            WHERE   vkorg IN so_vkorg
             AND    vtweg IN so_vtweg.
    IF sy-subrc NE 0.
      MESSAGE e004 WITH text-007.
    ENDIF.
ENDIF.
**Division
IF NOT so_spart[] IS INITIAL.
    SELECT SINGLE spart INTO l_spart
            FROM tvta
            WHERE   vkorg IN so_vkorg
            AND     vtweg IN so_vtweg
            AND     spart IN so_spart.
    IF sy-subrc NE 0.
      MESSAGE e005 WITH text-008.
    ENDIF.
ENDIF.
ENDFORM.                    " Validations
Top-of-page.
PERFORM sales_top_of_page.
Start-of-selection.
PERFORM sales_sel.
*&      Form sales_sel
*       text
* --> p1        text
* <-- p2        text
FORM sales_sel.
SELECT vbeln auart kunnr bstnk
     lfstk fkstk gbstk
     INTO TABLE sales_open
     FROM vbakuk
     WHERE vkorg IN so_vkorg
     AND   vtweg IN so_vtweg
     AND   spart IN so_spart
     AND   kunnr IN so_kunnr
     AND gbstk NE 'C'.
LOOP AT sales_open.
    WRITE:/4 sy-vline,
           5 sales_open-vbeln HOTSPOT ON COLOR 2 INTENSIFIED OFF,
           16 sy-vline,
           17 sales_open-auart COLOR 2 INTENSIFIED OFF,
           27 sy-vline,
           28 sales_open-kunnr COLOR 2 INTENSIFIED OFF,
           40 sy-vline,
           41 sales_open-bstnk COLOR 2 INTENSIFIED OFF,
           55 sy-vline,
           56 sales_open-lfstk,
           76 sy-vline,
           77 sales_open-fkstk,
           96 sy-vline,
           97 sales_open-gbstk ,
           117 sy-vline.
    HIDE sales_open-vbeln .
ENDLOOP.
ENDFORM.                    " sales_sel
*&      Form sales_top_of_page
*       text
* --> p1        text
* <-- p2        text
FORM sales_top_of_page.
WRITE:/4 sy-uline(114),
     50 'OPEN SALES ORDERS' COLOR 7 INTENSIFIED ON .
WRITE: /4 sy-vline,
          5 'SalesOrder' COLOR 1 ,
          16 sy-vline,
         17 'OrderType' COLOR 1,
         27 sy-vline,
         28 'Customer' COLOR 1,
         40 sy-vline,
         41 'PoNumber' COLOR 1,
         55 sy-vline,
         56 'Delivery Status' COLOR 1,
         76 sy-vline,
         77 'Billing Status' COLOR 1,
         96 sy-vline,
         97 'Processing Status' COLOR 1,
         117 sy-vline .
WRITE:/4 sy-uline(114).
ENDFORM.                    " sales_top_of_page
AT LINE-SELECTION.
SELECT       a~vbeln
               a~posnr
               a~matnr
               a~kwmeng
               b~lfsta
               b~lfgsa
               b~fksta
               b~fksaa
               b~gbsta
               INTO TABLE itm_sales
               FROM vbap AS a JOIN vbup AS b
               ON a~vbeln EQ b~vbeln
               AND a~posnr EQ b~posnr
               AND b~gbsta NE 'C'
               WHERE a~vbeln EQ sales_open-vbeln.
IF NOT sales_open IS INITIAL.
    LOOP AT itm_sales.
      at end of vbeln .
      sum.
      v_openqty = itm_sales-kwmeng.
      endat.
      WRITE:/5 itm_sales-vbeln,
                itm_sales-posnr,
                itm_sales-matnr,
                itm_sales-kwmeng,
                itm_sales-lfsta,
                itm_sales-lfgsa,
                itm_sales-fksta,
                itm_sales-fksaa,
                itm_sales-gbsta.
    ENDLOOP.
ENDIF.
skip 2.
write:/ 'open
Quantity for the order is ', v_openqty .

Problem with item and/or data during page-processing-PS/SQL

Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobi

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Iphone 5s and "forced data useage"

Hi all,
I was an android guy for years but finally went for an iphone 5s this time around and signed up with Verizon for the new $45 plan. Unltd Text, talk, and 250MB of data or AKA "The Wifi Only Plan." I came from metro PCS and enjoyed the same deal, but now I get with a better carrier with better coverage. I am fine with a low data amount plan because I have wifi at home and work. But this iphone 5s is forcing me to use data and I believe that it is not fair and want a rep to chime in on this situation. Some of the points may be able to be fixed on my end - so let me know how, but i think most are in a catch 22.
1) Most importantly... Voicemail. I go to the voicemail icon on my phone and if my cellur data is disabled... then I can not reach it. This forces me to turn on my data just to fetch voicemail which is a basic service and should be inclusive into my unlimited voice portion of the plan. Is there a way in the iphone 5s to get around this?
2) iMessage. This is sent across the data line of the carrier. I have had a few problems sending and receiving messages iphone to iphone because I have supposedly turned the data feature to iMessage off. Not good, not reliable service.
3) System Services. Eventhough it is only KBs of data it is still my data pool and should not have to pay for the auto system services that run on the phone. If I can control this on Iphone, lemme know where, but it seems that if I turn my data on for my phone these will auto send and receive data to where as individual apps I can block.
Also is there a data warning text I can receive when I get close to my monthly alotment?

I'm not a rep, but ....
1. Dial *86 instead of using the built in Visual Voice Mail.
2. Don't use iMessage. Unassociate your device with iMessage. Turn it off and just use SMS.
3. You can't change that. And as you noted, it doesn't use much data.
Yes. Log in to your My Verizon account you can set data alerts.

Reading file from ftp server and importing data into table

Hi experts,
Well basically i have text files with different layout that have been uploaded on an ftp server. Now i have to write a procedure to fetch those files, read them and insert data in a table... can that be done?
your precious help would be greatly helpful.
Thanks

declare
file1 UTL_FILE.FILE_TYPE;
filename varchar2(1000) := 'GTECHFILES';
str long;
begin
file1 := UTL_FILE.FOPEN (filename,'agent_dump_csv.rep','r',32767);
loop
UTL_FILE.GET_LINE ( file1, str );
--dbms_output.put_line('Value is :'||to_char(str));
end loop;
UTL_FILE.FCLOSE( file1 );
exception
when no_data_found then
dbms_output.put_line('END OF FILE');
UTL_FILE.FCLOSE( file1 ) ;
when others then
UTL_FILE.FCLOSE( file1 ) ;
dbms_output.put_line('ERROR: '||sqlcode||':'||sqlerrm) ;
end;
i have managed to write this piece of code and all lines are being read and now i need to insert data into my table and the fields are seperated by a `|` i am strill trying to figure how to do that now. help ...
Edited by: Kevin CK on 17-Jan-2010 22:40

Any way to use OBDC in SAP to access MySQL DB and retrieve data

I'd like to logon to an external MySQL DB (can de done easily enough with PHP)   but I'd like to do it with ABAP if possible.
Connecting via OBDC I should be able to retreive the data from the DB and then use it in my SAP application.
Some databases will allow connection via
EXEC SQL.
connect to :dbsid
ENDEXEC.
EXEC SQL.
    set connection :dbsid
ENDEXEC.
EXEC SQL.
open xxxxxxx for
select
...... data from external DB
from tablespace in external db
ENDEXEC.
do.
EXEC SQL.
    fetch next XXXXXX into
           :db_table_field, .... etc
             ENDEXEC.
if sy-subrc ne 0.
    exit.
endif.
insert table int_sap_table.
enddo.
EXEC SQL.
close XXXXXX
ENDEXEC.
If you can make this type of stuff work for a MySQL DB i'd appreciate the answer.
Using PHP has a drawback as you need to have it installed on the front end PC and run in Foreground.
The EXEC SQL commands run in batch which is what you need if you are talking about 100,000's of records from an external DB.
Cheers
jimbo

Hi Graham
Currently it doesn't seem to support MySQL.
Now that SAP has taken over again the development of MAXDB I can't see it providing direct MySQL to SAP functionality.
MAXDB is available but that would mean changing the entire architecture and we don't want to do that.
I think probably the best route to go would be to create a BAPI which is capable of performing a logon to the remote MySQL DB server, get the data and either send it back as IDOCS, an external flat file, or as an internal table depending on the volume of data to be retrieved.
The good thing about MySQL is that the command line interface makes logging on and retrieving data quite simple.
This data is actually wanted in a BI / BW system to provide for a number of business proces analyses.
I did think abut using "Web Services" but the data retrieval will essentially be done offline.
There is no requirement currently for transferring data FROM SAP back to the MySQL database ( although if you've ever dealt with top level management you know how quickly developments can change).
PHP for all it's drawbacks is the really easy way - but we'll have a problem doing this in background from the SAP servers. For foreground tasks it's a real doddle if you have php on your front end.
for example
<?php
$username = "pee_wee";
$password = "let_me_in";
$hostname = "localhost";        */* IP address of remote DB server */*
$dbh = mysql_connect($hostname, $username, $password)
or die("Unable to connect to MySQL");
print "Connected to MySQL<br>";
// you're going to do lots more here soon
mysql_close($dbh);
?>
Batch mode also seems OK also from the documentation
http://dev.mysql.com/doc/refman/5.1/en/batch-mode.html
so running an ABAP which can issue system commands (readily available) should work in theory provided the SAP server can connect to the remote MySQL server machine.
Thanks for your suggestions however
Cheers
jimbo

Inserting and retrieving data from a al32UTF8 database USING SQL Developer

hi guys,
Before i post my questions , i think its better for me to provide you guys with my understandings first so that it easier to understand where/if i have gone wrong..
I am using Window XP and Oracle 10g
Non-unicode client - a client program that need to use the OS code page for mapping of the retrieved unicode data from the database as well as the support of displaying/inserting the characters from that code page to the database.
E.G sqlplusw.exe
Therefore, when using a non-unicode client
1) we have to set the OS code page (Control panel - regional and language setting - advance - language for non unicode program ) to the code page that contain the characters we are going to display/insert.
2) we will also have to set the NLS_LANG characterset to the character set of the code page we are going to insert so that when we do a insert (for e.g in thai ) , oracle will know, and auto conversion to UNICODE can take place. This is also true when we retrieve unicode data from the database so that conversion to the correct character set can take place.
INSERTING
THAI ---> conversion ----> UNICODE
RETRIEVING
THAI <---- conversion <---- UNICODE
I hope my basic understanding is correct up till this point.
Unicode client - a client program that supports the displaying/inserting of unicode characters without the need of setting the OS code page (Control panel - regional and language setting - advance - language for non unicode program )
E.G isqlplus http or SQL developer
However,
1) There is still a need to set the NLS_LANG so that correct conversion can take place between the client and the database.
For e.g, when retrieving if we set the NLS_LANG character set to ZHS16GBK (chinese) and the data store in unicode in database is E.G (THAI) , then the conversion would be wrong .
Since it is a unicode supported client, then the NLS_LANG character set should be set to UNICODE as well.
Here come my questions
*Important - please help if you are busy and have no other time to answer the rest of the questions
*Q1) If i were to use a unicode client, what should i set my NLS_LANG character set to ?
AMERICAN_AMERICA.UTF8 ?
*Q2) Where do i set the NLS_LANG character set information in SQL Developer, i know there is a metalink for setting NLS_LANG using isqlplus but i cant seems to google any result for SQL developer.
Q3) Is my basic understanding right until this point ? If not, please explain in a more generalised term as i am really not familiar with character sets, code page, unicode , glyphs and fonts..
Q4) If a unicode client does not need to refer to the OS code page (set in regional and language) , is there a UNICODE code page for the client to refer to , or is there any Window API available ?
Q5)
There is still a need to set the NLS_LANG so that correct conversion can take place between the client and the >>database.
For e.g, when retrieving if we set the NLS_LANG character set to ZHS16GBK (chinese) and the data store in >>unicode in database is E.G (THAI) , then the conversion would be wrong .am i right on this point for UNICODE supported client ?
Thanks for spending time to read my questions and i hope to hear advices from you guys soon.
Million thanks again for sharing.
Best Regards,
Noob but willing to learn

The requirement to always set NLS_LANG is not true for JDBC, which ignores NLS_LANG altogether. Java programs fetch text data into String variables, which use Unicode UTF-16 by design. JDBC sets character set conversion so that data is converted between UTF-16 and the database or national character set.
The requirement to set NLS_LANG is not generally true for OCI, either. The first call in an OCI problem can be OCIEnvNlsCreate(). This call has two parameters that allow the caller to define the character set to use for VARCHAR2/CHAR/LONG/CLOB/statement text and the character set to use for NVARCHAR2/NCHAR/NCLOB. Only if these character sets are specified as 0, NLS_LANG character set is used. Also, OCI programs can specify different character sets for each bind or define variable (i.e. input/output buffer). Note: OCI programs always use NLS_LANG to initialize the language and territory settings for the client program and the database session. Only the character set can be specified is OCIEnvNlsCreate().
OCIEnvNlsCreate() can specify the client character set as UTF-16 (in platform endianess). This is not possible with NLS_LANG.
Various interfaces building on OCI, such as Oracle ODBC and ODP .NET, explicitly initialize OCI with Unicode character set, and thus ignore the NLS_LANG character set as well.
Thnx,
Sergiusz

OBIEE 11g - Data Fetch Issue.

Hi,
I am facing this weird issue regarding data fetching while executing Reports in OBIEE 11.1.1.5. When I login to the BI user interface and execute any report for the first time, everything is working fine. Bt after that I am not able to execute any report later. Even the report executed for the first time, when I rebuilt and execute it I cannot see the data this time. The Results user interface says - The layout of this view combined with the data,selections,drills or prompt values choosen resulted in no data.
Thanks in advance.
Regards,
Dev.

Hi,
I also encounter the same issue. When I view combined layout, I get the No Results message. But when I edit the table layout, I see that there are records returned. Does anyone had any luck in resolving this issue?
Thanks!

Regarding Goods issue date and order date.

Hi All,
Could you please tell me from where we can fetch Goods issue date and Order date.
Waiting for your reply.

Preeti,
Goods issue date/order date of what ?
Goods can be issued in a number of ways, in reference to many types of documents. In each case, the GI date and order date are found in different places.
Please elaborate your request.
Best Regards,
DB49

Saving data in a database and publishing data to multiple clients

Hi there. I'm using a bunch of Compact FieldPoint modules to read out a few hundred voltages, temperatures, currents, etc. I acquire this data at about 1 Hz (pretty slow). I would like to record this data to some sort of database on a cpu (running LV 8.0, connected to the FieldPoint mods), and serve the data to multiple (between 10 and 50) clients over the net, each running a compiled stand-alone "data grabber and viewer" application (which I'll have to write of course). I'd like these external clients to basically be able to pick a certain variable from the database, and plot it for the last week (or something like that). Presumably the standalone client would send some database query to the server. The server would then send the data to the client, and the standalone client would receive the data and plot it as the user sees fit. My question is how to implement this database? Should I use the LabView "Database" Add-On to create a database to store the data? Is it better to just store the data as binary and write my own data fetching routine to handle queries? How can I write this database to disk for permanent storage? Could this database be accessible outside of LabView?
Any help on this would be appreciated. Thanks!
Jesse Wodin
Post Doctoral Researcher
Stanford Linear Accelerator Center
650-504-2512

Hi Jesse,
The Citadel database is not a relational database. It's highly optimized for storing lower-rate (non-waveform) channel-by-channel, or "trace" measurement data. Another option you can consider is using DSC and Citadel on the server then writing a utility to export the data from Citdael to an SQL database. --That would solve the problem of having to write a logger application from scratch. You would only have to write the relatively simple application to export the data from Citadel and import it into a relational database.
You could accomplish this two ways. First, DSC includes a set of VIs that will retrieve historical data from Ciatdel. You could use LabVIEW to parse this data and write it to a table in a relational database. Second, Citadel actually includes a locally accessible ODBC interface. (You can query Citadel using an SQL query from the local computer). You could query Citadel using this interface, then write the result to a table in a relational database.
To view Citadel in its native format or query a Citadel database using ODBC from a remote comptuer that comptuer would need to have a licensed DSC RTS installed.
~~

Purchase order Text and Basic data text needed from MM03 tcode

Hi
I need Purchase order text and Basic data text to be fetched by material number.
Purchase order text and Basic data text are present in MM03 Tcode.
Can anyone please guide me how to do it.
Kind Regards
Sajid

hi
Purchase order text
GotoMM03 ->view purchase order text.
In purchase order text screen, below you find one icon 'Editor'
click on this icon. It will open another screen.
In this screen -> click Goto Menu->Header.
It will open the details about Purchase order text.
TextName (Generally it is material name)
Language
Text ID : BEST
Text Object: MATERIAL.
Pass the above to READ_TEXT to get the text
*Basic data text *
Basic Data Text in MM03

Performmance in ADRC and KNA1 Data Fetching

Similar Messages

Maybe you are looking for