Periodic data for 0balance in 0FI_GL_12

hi guys,
how can we get periodic data for 0balance key figure for datasource 0FI_GL_12 ?

Hi Rian,
You can get the cumulative balance through start routine. It can be calculated from debit and credit amount. Please find the relevant code as below.
calculate 0BALANCE from debit and credit value
      ls_data_package-balance = ls_data_package-debit
                                                   - ls_data_package-credit.
      "Credit is positive!
      modify SOURCE_PACKAGE from ls_data_package.
      if ls_data_package-balance ne 0.
if 0BALANCE is not zero =>
    append periods to internal table for datapackage
        clear: ls_data_package-credit,
               ls_data_package-debit,
             ls_data_package-sales,
               ls_data_package-quantity.
Hope it is useful.
Regards,
Muthu.

Similar Messages

Can I use PA period date for Project Functional currency exchange rate instead of EI Date?

Hi,
We are planning to enable project currency for our projects. However while testing we have encountered one challange. We want to use PA date for all our currency conversions. However Oracle uses EI date to convert project functional currency transactions.
Does anybody know any setup or solution to convert all expenditure item transactions based upon PA date instead of EI date? Help / Solutiion on this regard is highly appriciated.
Thanks & Regards,

Hi,
Do u mean you have already done your Trx in EI Date and now u want to use PA Period Ending Date?
Please Correct me if i'm wrong, u want to update all the Trx from EI Date to PA Period Ending Date?
If you update from EI Date to PA Period Ending Date, this will only be applicable to Future Trx's not for the one's already incurred.
Regards
Ragahavender K

Periodic data for New GL

Hello Experts,
Is there any data source which provide new GL data with periodic method & not cumulative.
I mean, when I report on Feb it should only contain transactions happened in Feb & not from opening balance.
Thanks & Regards,
Suneel

Hi Suneel
In the infopackage you can filter through ABAP code to fetch only current month data ( avoiding Opening balance)
Bye

How to get period date of for a given month from a given date in mdx for SSRS report (mm/dd/yyyy)

I have a situation, where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the date is given
from the parameter dynamically) in MDX for SSRS report
ram

Hi ram,
Per my understanding that you want to get the period date based on the month selected and the given date, right?
Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
Specify the available value:
Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Specify the default Value:
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Add filter to the dataset as below:
Preview you will get all the date in the given Period:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

Implications of Using a Rule to Populate Periodic Data in a YTD app

Is it bad practice to specify and populate an intersection with periodic data using rules when the application is set up as YTD?
For example:
Entity A has a $50 intercompany expense with Entity B. Entity B is reporting a $48 intercompany income with Entity A. We have a rule set up to populate a statistical "counterparty" account to show what the ICP is reporting. This way we can create custom SV and Financial Reports and also allow users to view info from entities (ICPs) in which they might not have access.
So the YTD line items are...
Entity A, ICP B shows interco_exp $50 and counterparty_interco_inc $48
Entity B, ICP A shows interco_inc $48 and counterparty_interco_exp $50
The question on Periodic vs YTD comes in when one entity is a different functional currency than the icp. Writing the rule is much easier using periodic data for P&L accounts (using the period fx rate to back into the functional currency of the entity).
Thoughts/suggestions?
Thanks.

This would be done in InfoPath.
Click on your Matter Name field and then select properties. For default value, select the data source as your other data source and then highlight the Matter name field. Click filter data and use the form field for Matter number.
Check out this article:
http://blogs.msdn.com/b/bharatgupta/archive/2013/03/07/create-cascading-dropdown-in-browser-enabled-infopath-form-using-infopath-2010.aspx
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Need a function to calculate employee attendance data for a given period

need a function to calculate employee attendance data for a given period
as
Working days,
CL ,
SL,
PL,
LWP
regards,
Gaurav Sood.

Issue resolved

Period locked for new data on PO an SO

Since last week when we try to update a PO anr SO we got this Message
PERIODE LOCKED FOR NEW DATA.
For exemple we change the remark feild only and we got this message.
Since PO and SO are not impacting any gl entry this is not normal. on the DEMO DB i can update a SO or PO when the perio is close without any problem

Hi Roy,
First you have to change if your posting perioud is close.
if close then choose your posting perioud then in your window left side a sign of triangle click on.
after change ur status and after u are able to do changes in previous posting perioud.
this may help u...
Thanks.
JRAJPUT

Fixed due date for billing created in a period

Hi
We want the new payment tem that should work in the following way
Billing date from 01.01.2008 to 31.03.2008 due date should be 20.04.2008
Billing date from 01.04.2008 to 30.06.2008 due date should be 20.07.2008
Please note that the billing period is for three month for which we want a fixed due date.
We required the expert's comment on the above scenario
Regards
DILIP PARAB

Hi Dilip
This can be configured in the payment terms (OBB8). Here under baseline date calculation
Fixed Day should be 20 (in your case)
Additional Months 3
then select posting date as default for baseline date.
This will take for every month invoice 3 months.
But in your case as you stated 1.1.2008 to 31.3.2008 it should be standard 20.4.2008 u have to create 3 payment terms as above with a difference of additional months, one for 3 (for the first month billing), second one as 2 (for second month billing) and 3 rd one as 1 (for 3 rd month billing). You can attach the respective payment terms at the time of your sale order creation.
Any additional help revert back.
Regards
Brahma

Creat Job for LSMW (periodical data transfer)- idoc BLAORD

Hi,
We are trying to create job for LSMW (thru frame program for periodic data transfer) for idoc BLAORD (Purchasing contract)
When I am running the job that I created, the job is cancelled and the error is:
"Upload from front-end is not possible in batch mode.
Message no. /SAPDMC/LSMW_OBJ_070 020"
How can I correct that? so I will be able to run a job (the job mast run background?)
Thanks,
Tal Sasson

Hello,
I was also receiving the same message /SAPDMC/LSMW_OBJ_070 020 even though I specified in /SAPDMC/SAP_LSMW_INTERFACE the server path. The problem was that in LSMW->Specify Files you have to delete the definition of front-end files and define application server files.
That Flag File (Path and Name) (field /SAPDMC/LSOINP-FILENAME in program /SAPDMC/SAP_LSMW_INTERFACE) is kind of useless since it is ignored anyway and files defined in LSMW object are imported and they have to be read anyway if you use more than one file.
Regards,
Peter

APP-INV-05447 No Open Period Found For Data Entered

Brother Hussain
I am new to this forum, currently I am learning Oracle APPs, I have practicing Conversion In this I am doing Item Import Project. I have done all the process of conversion like from flat file to staging table using sqlldr, then validation of data after successfully completed I started Interface. I want to add a quantity to my items. steps >
Front End Steps OF Item Onhad Quantity
1. Navigator Inventory Vision Operations - in this Transaction Transactions then I select Miscellaneous Transaction whenever I try to Click on Transaction Lines Error Is Coming with pop up window : " APP-INV-05447 No Open Period Found For Data Entered"
Please Help Me I will be thankful to you.
I asked My faculty of this error he told me some functional setting have to be done which I don't know .
Brother You replied me by this :
Please see these docs.
INVTOTRX: APP-INV-05447 No Open Period Found for Date Entered [ID 200026.1]
Entering an Inventory Transaction at End Date of Period in a different Timezone get Error:APP-INV-05447:No open period found for date entered [ID 1473890.1]
APP-INV-05447 Error In Transact Move Order Form [ID 1446937.1]
Transact Material error: 'No open period found for the date entered' if current system date is not in open period. [ID 743607.1]
Batch Material Transactions Allowed When Inventory Period Is Not Open [ID 1296914.1]
can I get the link of the said documents...

I have branched off your original post here APP-INV-05447 No Open Period Found For Data Entered
Pl continue the discussion in that thread for continuity purposes.
MOS Docs are only available to those customers who have a paid support contract with Oracle - sharing them in any manner is a violation of that contract
HTH
Srini

APP-INV-05447: No open period found for date entered

Hi All
I try to do Inter-Organization Transfer in OPM. But I got this error "APP-INV-05447: No open period found for date entered".
What shall I do for this error?
I controlled Inventory Calendar. The period is open.
Thanks

Hi,
I got the same problem. Pleas tell me what's your solution?
Parts Requirement Order stuck in Transaction Interface with the error
" No open period found for date entered
No open period found for date entered
Transaction processor error
No open period found for date entered
No open period found for date entered
Transaction process".
Details are as follows:
Transaction is Done on 30-NOV-2009.
Source Org Period is open on 30-NOV-2009
Destination Org Period is closed on 30-NOV-2009.
Due to destination Org is closed, this transactions stuck in interface.
I have opened the Cost Periods (DEC Month) for both Source and Destination Org, and resubmitted all lines after updating Transaction date to 01-DEC-2009. Still transaction could not go through.
How should I handle this error?
Regards,
Chakry.

Program to collect user u2013 transaction execution data for past period

Hi Experts
We are developing a program to collect user u2013 transaction execution data for past period ( 3 months-1 year ). We are getting required User and Tcode output but unable to find exact count per tcode ( executed by respective user).
We have following count components available in SAPWL_WORKLOAD_GET_STATISTIC / SWNC_COLLECTOR_GET_AGGREGATES
COUNT , DCOUNT ( Dialog count for transaction ) , UCOUNT , BCOUNT , ECOUNT, SCOUNT ,LUW_COUNT .
Out of which LUW_COUNT -Logical Units of Work comes close to no ot time transaction was executed but itu2019s even not the exact count as one transaction code can have more than one LUW .
Does anyone have idea about how to get the right count .
Thanks
Vani

If audit log is enabled in SM19 for transaction criteria all, you can get the transaction history executed by the users. But may need more space on audit file system if this is enabled for all users. May be you can archive once in 3 months into ZIP files and can unzip whenever you need.

The delivery date for the PR needs to consider planning Calender Periods

Hi Friends,
Please help me in solving in my scenario given below:
The Planning calender periods are from Monday through Thursday(No Friday and weekends). When there is a Purchase Requisition (PR) planned date on Monday and the GR processing time is one day. The delivery date should be on the before Thursday (Becasue there is no period on Friday).
But, the delivery date is being created with the before Friday, which shouldn't happen.(Requirement is that Delivery date shouldn't consider that friday, hence, the delivery date needs to be on Thursday).
NOTE: The lot size settings are Lot sizing Procedure : P(Period lot sizing procedure), Lot-size indicator: K (Period lot size as in Planning Calender), Scheduling : 1 (Period Start = Delivery date).
Thanks for helping me in advance,
Surendra Chakka

Hi Santosh,
Thanks for your Questions. Below are the explainations:
1. Can you expalin how your system is behaving at the moment?
A. Presently the GR Processing time is 1 day for a material in Plant. So, if the user wants to produce on Wednesday (Planned date in PR, provided by the MRP run), then the delivery should be on Tuesday (Because GR processing time is 1 day). In the same way, he dont wants the delivery to be on Friday. I mean, if he wants to produce on Monday, he wants the delivery to be on Thursday.
Only Friday, he don't wants to make the Delivery.(The delivery date should not show Friday in PR's).
2. Pls explain your original MRP view and planning calendor setting...
A. For solving of the above issue, we changed the Lot size to copy of "PK" - Period lot size acc to planniong calendar. Then we maintained the Planning calendar, in which the periods are for every Monday, tuesday, wednesday and thursday. Expecting, the delivery should be excluded for friday, the friday in the planning calendar is not given as a period.
The scheduling paramter in the Lotsize is tried with both the options (period start = Deliery date and period end = Delivery date).
Later removed "PD" in MRP type and tried with "R1" Time phase req. But, the precondition for this is to maintain "Forecast req". This is also done. But, then, the system for this material is not responding to the MRP run. It is asking to run the forecast model. We ar not using SOP.
3. The results thst you get with current setting?
A. For the planned date in PR of Monday, the delivery date in PR is on the day before monday. i.e., Friday (Saturday and sundays are holidays).
4. Expected results...?
A. For the planned date in PR of Monday, the delivery date in PR should be Thursday (the day before monday production).
Hope, i am clear in my explaination. Please revert back, if you need any more information.
Thanks and Regards
Surendra Chakka

How to approach in getting the dates for the user given periods

Hi All,
I have areuirement where the calendar would be like as 466 for a period
for eg. period 1(Jan) has 4 weeks
period 2(Feb) has 6 weeks
period 3(Mar) has 6 weeks
again period 4(Apr) has 4 weeks
period 5(May) has 6 weeks
period 6(June) has 6 weeks
How to get the dates (from date and end date) for the periods.
Anybody's help will be appreciated
Regards
Saugata

I have areuirement where the calendar would be like as 466 for a periodWhat does that mean? Is 466 the format of the data?
The end date depends on the start date. This query might be helpful for you
SQL> WITH data AS(
2    SELECT 1 period, 4 duration FROM dual UNION ALL
3    SELECT 2, 6 FROM dual UNION ALL
4    SELECT 3, 6 FROM dual UNION ALL
5    SELECT 4, 4 FROM dual UNION ALL
6    SELECT 5, 6 FROM dual UNION ALL
7    SELECT 6, 6 FROM dual)
8 SELECT
9    period,
10    duration,
11    SYSDATE + SUM(duration) OVER (ORDER BY period RANGE UNBOUNDED PRECEDING) * 7 AS end_date
12 FROM data
13 ;
    PERIOD   DURATION END_DATE
         1          4 16-NOV-07
         2          6 28-DEC-07
         3          6 08-FEB-08
         4          4 07-MAR-08
         5          6 18-APR-08
         6          6 30-MAY-08
6 rows selected.
SQL>

Generate Posting Date for Payroll Periods"

Hi all,
What is the relevance of "Generate Posting Date for Payroll Periods" ?
table T549S
Rx

Posting Date is required after payroll run and exited then we have to post payroll results to accounts.After payroll run which date we have to post to accounts. Source is 01 payday...target 04 posting date....for ex If payday is 30th every month.....then posting date is after X days .....like you have to generate postinfg dates.
Mohan

Periodic data for 0balance in 0FI_GL_12

Similar Messages

Maybe you are looking for