Permission Denied accessing over link
I have several documents which I normally access via a symbolic link (NTFS, not a standard shortcut). These now give a permission denied error. If I access them using the UNC path, or if I disable protected mode, they work.
I am running Adobe Reader X, v10.0.1 on Windows Vista Enterprise 32 bit.
Well, I just stumbled across this issue on Adobe Reader X 10.1.3. The bug is alive and well for PDFs stored on a local hard disk within a directory that's a symbolic link to another directory on the same local hard disk. Turning off protected mode does fix it, thanks for the tip. Judging by the list of fixes on the Protected Mode Troubleshooting page, protected mode was released as a mess of bugs and should probably just stay turned off until Acrobat XI is released...
Similar Messages
-
Apache user dir (13)Permission denied: access to /~simha/ denied
I am getting Access forbidden! when I am trying to connect to http://localhost/~simha/ where simha is my user name
my /var/log/httpd/error_log says
[Thu Jul 08 17:44:30 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~simha/ denied
I tried a lot and gave up. Can any one help me in this in regard
The following are the permisions of my home dir simha and public_html
drwx--x--x 130 simha users 16384 Jul 8 17:04 simha
drwxr-xr-x 2 simha users 4096 Jul 8 17:02 public_html
The following are my httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
The following are my /etc/httpd/conf/extra/httpd-userdir.conf
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
I also tried adding user to the group http. BUt nothing is working.Do you have [or more like lack] +x on the user folder?
-
File Vault: You don't have permission to access /~anybody/ on this server.
I tried it on several machines without success:
403 Forbidden
You don't have permission to access /~anybody/ on this server.
Apache/1.3.33 Server at localhost.local Port 80
I can reach the main site on the computer but not the user site if user was setup with File Fault.
I did control permissions and tried this issue on other machines with clean installed 10.4.x
:::[Wed Apr 4 13:19:17 2007] [error] [client 192.168.0.10] (13)Permission denied: access to /~anybody/ failed because search permissions are missing on a component of the path:::
NO SOLUTION. IS THIS A BUG?If I log in to a FileVault user's account, change the group of that user's home folder to "www" and allow group "---x" permissions, it is possible, from another account, to access "http://127.0.0.1/~filevaultuser". I'm not in a situation where I can test access from a different machine, and my system is PPC, not Intel, but I don't think that should matter. I'm not sure why it is not working for you.
Note that for it to work requires that the user is logged in (otherwise, because of how FileVault works, the "~/Sites" folder doesn't exist), and the permissions along the path "/Users/filevaultuser/Sites" have to allow "www" access. If the user is not logged in, access may fail for a couple of reasons. First, because the "Shared" folder doesn't exist - the home folder is encrypted - leading to a 404 error. Second, the permissions of "/Users/filevaultuser" may be "drwx------" by default (access only for the owner), leading to a permissions error.
It might help to recall that when a FileVault user's home folder is stored in an encrypted disk image "/Users/filevaultuser/filevaultuser.sparseimage", and when they log in, "/Users/filevaultuser" is moved to "/Users/.filevaultuser", and "/Users/.filevaultuser/filevaultuser.sparseimage" is mounted at "/Users/filevaultuser". I.e. the path "/Users/filevaultuser" refers to two different folders depending on whether or not the user is logged in.
..."it writes that if I'm looged in as the user which is using File Vault it should work - but it doesn't."...
I think that statement refers to 10.3 - lower in the article, it says that for Tiger, the "Public" folder won't be visible after logging in. It could also be referring to some changes made to personal file sharing that were made between 10.3 and 10.4, rather than a filevault specific issue.
Just to reiterate, I don't think enabling web sharing for a user that needs the security of FileVault is really a good idea. It might be better to give that user a second non-FileVault account, where they can place their materials. That way, the homepage would be available even if they are logged out. -
A gaming wikidot site i help with has a customized search on this page http://www.thetelonproject.com/search-the-site. It works in IE and other browsers I have, and other FF users dont have a issue, its just mine it seems.
The line that firebug references is this
>>> parent.parent.$j('iframe.html-block-iframe[src$="/' + id + '"]').height(height + 'px');<<<
error; Permission denied to access property '$j'
I dont know if this blocked from an addon or a java setting, the site admin doesn want to change the page cuz it works in his FF. I can paste more code if needed.That is an iframe with a src that links to PayPal (Donate):
*/nav:side/html/11507054cca0c8ca485ea28049465ac4f038d001-491762192042853969
http://thetelonproject.wdfiles.com/local--html/nav%3Aside/11507054cca0c8ca485ea28049465ac4f038d001-491762192042853969/www.thetelonproject.com/
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
"Permission denied" while accessing Canon 550D with libgphoto2
I have followed the Wiki for access problems but I just can't get it to work, the camera is seen but I cannot transfer anything from it, I'm getting "libusb couldn't open USB device /dev/bus/usb/002/003: Permission denied. libusb requires write access to USB device nodes." all the time
gphoto2 --summary:
Camera summary:
Manufacturer: Canon Inc.
Model: Canon EOS 500D
Version: 3-1.1.0
Serial Number: 8486ab29c68547159242370d5563101a
Vendor Extension ID: 0xb (2.0)
Capture Formats: JPEG
Display Formats: Association/Directory, Script, DPOF, MS AVI, MS Wave, JPEG, CRW, Unknown(b103), Unknown(bf02), Defined Type, Unknown(b104)
Supported MTP Object Properties:
Association/Directory/3001: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified
Script/3002: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified
DPOF/3006: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified
MS AVI/300a: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified dc87/Width dc88/Height dc89/Duration de97/ScanDepth de9b/VideoFourCCCodec de9c/VideoBitRate de9a/AudioBitRate de93/SampleRate de94/NumberOfChannels
MS Wave/3008: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified dc89/Duration de9a/AudioBitRate de93/SampleRate de94/NumberOfChannels
JPEG/3801: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified dc87/Width dc88/Height dcd3/ImageBitDepth
CRW/b101: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified
Unknown(b103)/b103: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified
Unknown(bf02)/bf02: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified
Defined Type/3800: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified dc87/Width dc88/Height dcd3/ImageBitDepth
Unknown(b104)/b104: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier dc44/Name dc08/DateCreated dc09/DateModified dc87/Width dc88/Height dc89/Duration de97/ScanDepth de9b/VideoFourCCCodec de9c/VideoBitRate de9a/AudioBitRate de93/SampleRate de94/NumberOfChannels
Device Capabilities:
File Download, File Deletion, File Upload
No Image Capture, No Open Capture, Canon EOS Capture
Storage Devices Summary:
store_00020001:
StorageDescription: SD
VolumeLabel: None
Storage Type: Removable RAM (memory card)
Filesystemtype: Digital Camera Layout (DCIM)
Access Capability: Read-Write
Maximum Capability: 8160542720 (7782 MB)
Free Space (Bytes): 698908672 (666 MB)
Free Space (Images): -1
Device Property Summary:
Property 0xd402:(read only) (type=0xffff) 'Canon EOS 500D'
Property 0xd407:(read only) (type=0x6) 1
Property 0xd406:(readwrite) (type=0xffff) 'Unknown Initiator'
and the debug file from gphoto
0.000030 main(2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
0.000086 main(2): gphoto2 2.4.10
0.000101 main(2): gphoto2 has been compiled with the following options:
0.000115 main(2): + gcc (C compiler used)
0.000126 main(2): + popt (mandatory, for handling command-line parameters)
0.000138 main(2): + exif (for displaying EXIF information)
0.000150 main(2): + no cdk (for accessing configuration options)
0.000162 main(2): + aa (for displaying live previews)
0.000174 main(2): + jpeg (for displaying live previews in JPEG format)
0.000185 main(2): + readline (for easy navigation in the shell)
0.000201 main(2): libgphoto2 2.4.10.1
0.000215 main(2): libgphoto2 has been compiled with the following options:
0.000228 main(2): + gcc (C compiler used)
0.000242 main(2): + ltdl (for portable loading of camlibs)
0.000254 main(2): + EXIF (for special handling of EXIF files)
0.000268 main(2): libgphoto2_port 0.8.0
0.000283 main(2): libgphoto2_port has been compiled with the following options:
0.000296 main(2): + gcc (C compiler used)
0.000307 main(2): + ltdl (for portable loading of camlibs)
0.000321 main(2): + USB (libusb, for USB cameras)
0.000333 main(2): + serial (for serial cameras)
0.000345 main(2): + no resmgr (serial port access and locking)
0.000357 main(2): + no baudboy (serial port locking)
0.000368 main(2): + no ttylock (serial port locking)
0.000380 main(2): + no lockdev (serial port locking)
0.000392 main(2): CAMLIBS env var not set, using compile-time default instead
0.000404 main(2): IOLIBS env var not set, using compile-time default instead
0.000433 setting/gphoto2-setting.c(2): Creating $HOME/.gphoto
0.000487 setting/gphoto2-setting.c(2): Loading settings from file "/home/david/.gphoto/settings"
0.000724 main(2): The user has not specified both a model and a port. Try to figure them out.
0.000749 gphoto2-port-info-list(2): Using ltdl to load io-drivers from '/usr/lib/libgphoto2_port/0.8.0'...
0.000841 gphoto2-port-info-list(2): Called for filename '/usr/lib/libgphoto2_port/0.8.0/disk'.
0.003838 gphoto2-port/disk(2): found fstab fsname tmpfs
0.003872 gphoto2-port/disk(2): found fstab fsname tmps
0.003896 gphoto2-port/disk(2): found fstab fsname UUID=5a94d96e-0fdd-425a-91c5-6fe96da349f0
0.003912 gphoto2-port/disk(2): found fstab fsname UUID=ce706691-4517-477c-a42d-417ab8ffef38
0.003931 gphoto2-port/disk(2): found fstab fsname UUID=eca58c28-a738-4567-a57e-d30d04d2fc69
0.003951 gphoto2-port/disk(2): found fstab fsname UUID=10bc0f7b-5677-4a4b-9a20-678037ca06ff
0.003972 gphoto2-port/disk(2): found fstab fsname 192.168.0.10:/Data
0.004082 gphoto2-port/disk(2): found mtab fsname rootfs
0.004103 gphoto2-port/disk(2): found mtab fsname proc
0.004125 gphoto2-port/disk(2): found mtab fsname /sys
0.004148 gphoto2-port/disk(2): found mtab fsname udev
0.004170 gphoto2-port/disk(2): found mtab fsname /run
0.004192 gphoto2-port/disk(2): found mtab fsname /dev/sda1
0.004209 gphoto2-port/disk(2): found mtab fsname devpts
0.004231 gphoto2-port/disk(2): found mtab fsname shm
0.004252 gphoto2-port/disk(2): found mtab fsname tmpfs
0.004274 gphoto2-port/disk(2): found mtab fsname tmps
0.004294 gphoto2-port/disk(2): found mtab fsname /dev/sda3
0.004313 gphoto2-port/disk(2): found mtab fsname /dev/sdc1
0.004331 gphoto2-port/disk(2): found mtab fsname rpc_pipefs
0.004356 gphoto2-port/disk(2): found mtab fsname 192.168.0.10:/Data/
0.004408 gphoto2-port-info-list(2): Could not load port driver list: 'Unspecified error'.
0.004425 gphoto2-port-info-list(2): Called for filename '/usr/lib/libgphoto2_port/0.8.0/ptpip'.
0.004540 gphoto2-port-info-list(2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/libgphoto2_port/0.8.0/ptpip'.
0.004560 gphoto2-port-info-list(2): Loaded '' ('^ptpip') from '/usr/lib/libgphoto2_port/0.8.0/ptpip'.
0.004576 gphoto2-port-info-list(2): Called for filename '/usr/lib/libgphoto2_port/0.8.0/serial'.
0.004778 gphoto2-port-info-list(2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/libgphoto2_port/0.8.0/serial'.
0.004797 gphoto2-port-info-list(2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/libgphoto2_port/0.8.0/serial'.
0.004819 gphoto2-port-info-list(2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/libgphoto2_port/0.8.0/serial'.
0.004835 gphoto2-port-info-list(2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/libgphoto2_port/0.8.0/serial'.
0.004850 gphoto2-port-info-list(2): Loaded '' ('^serial') from '/usr/lib/libgphoto2_port/0.8.0/serial'.
0.004865 gphoto2-port-info-list(2): Called for filename '/usr/lib/libgphoto2_port/0.8.0/usb'.
0.189309 gphoto2-port-info-list(2): Loaded '' ('^usb:') from '/usr/lib/libgphoto2_port/0.8.0/usb'.
0.189349 gphoto2-port-info-list(2): Loaded 'Universal Serial Bus' ('usb:001,005') from '/usr/lib/libgphoto2_port/0.8.0/usb'.
0.189364 gphoto2-port-info-list(2): Loaded 'Universal Serial Bus' ('usb:002,003') from '/usr/lib/libgphoto2_port/0.8.0/usb'.
0.189380 gphoto2-port-info-list(2): Called for filename '/usr/lib/libgphoto2_port/0.8.0/usbdiskdirect'.
0.189702 gphoto2-port-info-list(2): Called for filename '/usr/lib/libgphoto2_port/0.8.0/usbscsi'.
0.189845 gphoto2-port-info-list(2): Counting entries (11 available)...
0.189864 gphoto2-port-info-list(2): 7 regular entries available.
0.190025 gphoto2-abilities-list(2): Using ltdl to load camera libraries from '/usr/lib/libgphoto2/2.4.10.1'...
0.190458 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/adc65'.
0.190478 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/agfa_cl20'.
0.190491 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/aox'.
0.190505 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/ax203'.
0.190520 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/barbie'.
0.190533 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/canon'.
0.190546 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/casio_qv'.
0.190558 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/clicksmart310'.
0.190571 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/digigr8'.
0.190584 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/digita'.
0.190597 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/dimagev'.
0.190609 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/dimera3500'.
0.190622 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/directory'.
0.190634 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/enigma13'.
0.190647 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/fuji'.
0.190660 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/gsmart300'.
0.190672 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/hp215'.
0.190685 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/iclick'.
0.190698 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/jamcam'.
0.190710 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/jd11'.
0.190723 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/jl2005a'.
0.190736 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/jl2005c'.
0.190748 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/kodak_dc120'.
0.190761 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/kodak_dc210'.
0.190774 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/kodak_dc240'.
0.190786 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/kodak_dc3200'.
0.190799 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/kodak_ez200'.
0.190812 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/konica'.
0.190825 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/konica_qm150'.
0.190837 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/largan'.
0.190850 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/lg_gsm'.
0.190862 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/mars'.
0.190875 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/mustek'.
0.190888 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/panasonic_coolshot'.
0.190910 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/panasonic_dc1000'.
0.190923 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/panasonic_dc1580'.
0.190936 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/panasonic_l859'.
0.190948 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/pccam300'.
0.190961 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/pccam600'.
0.190973 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/polaroid_pdc320'.
0.190986 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/polaroid_pdc640'.
0.190999 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/polaroid_pdc700'.
0.191012 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/ptp2'.
0.191024 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/ricoh'.
0.191037 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/ricoh_g3'.
0.191050 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/samsung'.
0.191063 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sierra'.
0.191076 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sipix_blink2'.
0.191088 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sipix_web2'.
0.191101 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/smal'.
0.191113 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sonix'.
0.191126 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sony_dscf1'.
0.191138 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sony_dscf55'.
0.191151 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/soundvision'.
0.191164 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/spca50x'.
0.191176 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sq905'.
0.191189 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/st2205'.
0.191202 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/stv0674'.
0.191214 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/stv0680'.
0.191227 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/sx330z'.
0.191240 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/topfield'.
0.191252 gphoto2-abilities-list(2): Found '/usr/lib/libgphoto2/2.4.10.1/toshiba_pdrm11'.
0.191269 gp-abilities-list(2): Found 62 camera drivers.
0.210941 gphoto2-port-info-list(2): Counting entries (11 available)...
0.210974 gphoto2-port-info-list(2): 7 regular entries available.
0.210984 gphoto2-port(2): Creating new device...
0.210996 gphoto2-port-info-list(2): Getting info of entry 0 (11 available)...
0.211082 gphoto2-port(2): Setting settings...
0.211095 gphoto2-port-info-list(2): Getting info of entry 1 (11 available)...
0.211176 gphoto2-port(2): Setting timeout to 500 millisecond(s)...
0.211189 gphoto2-port(2): Setting settings...
0.211199 gphoto2-port-info-list(2): Getting info of entry 2 (11 available)...
0.211273 gphoto2-port(2): Setting timeout to 500 millisecond(s)...
0.211286 gphoto2-port(2): Setting settings...
0.211295 gphoto2-port-info-list(2): Getting info of entry 3 (11 available)...
0.211371 gphoto2-port(2): Setting timeout to 500 millisecond(s)...
0.211383 gphoto2-port(2): Setting settings...
0.211393 gphoto2-port-info-list(2): Getting info of entry 4 (11 available)...
0.211466 gphoto2-port(2): Setting timeout to 500 millisecond(s)...
0.211479 gphoto2-port(2): Setting settings...
0.211488 gphoto2-port-info-list(2): Getting info of entry 5 (11 available)...
0.213264 gphoto2-port(2): Setting timeout to 5000 millisecond(s)...
0.213278 gphoto2-port(2): Setting settings...
0.213287 libusb(2): gp_port_usb_update(old int=0, conf=-1, alt=-1), (new int=0, conf=-1, alt=-1)
0.213296 gphoto2-abilities-list.c(1): Auto-detecting USB cameras...
0.213330 gphoto2-port-usb(1): Looking for USB device (vendor 0x4a9, product 0x31cf)... found.
0.213340 gphoto2-port-usb(2): inep to look for is 81
0.213348 gphoto2-port-usb(1): Detected defaults: config 1, interface 0, altsetting 0, inep 81, outep 02, intep 83, class 06, subclass 01
0.213365 gphoto2-abilities-list.c(2): Found 'Canon EOS 500D' (0x4a9,0x31cf)
0.213376 gphoto2-port-info-list(2): Getting info of entry 6 (11 available)...
0.215043 gphoto2-port(2): Setting timeout to 5000 millisecond(s)...
0.215056 gphoto2-port(2): Setting settings...
0.215065 libusb(2): gp_port_usb_update(old int=0, conf=-1, alt=-1), (new int=0, conf=-1, alt=-1)
0.215075 gphoto2-abilities-list.c(1): Auto-detecting USB cameras...
0.215353 gphoto2-port(2): Freeing port...
0.215365 gphoto2-port(2): Closing port...
0.215411 gphoto2-camera(2): Setting abilities ('Canon EOS 500D')...
0.215424 gphoto2-setting(2): Setting key 'model' to value 'Canon EOS 500D' (gphoto2)
0.215435 gphoto2-setting(2): Saving 4 setting(s) to file "/home/david/.gphoto/settings"
0.215589 gphoto2-port-info-list(2): Looking for path 'usb:001,005' (11 entries available)...
0.215603 gphoto2-port-info-list(2): Getting info of entry 5 (11 available)...
0.215613 gphoto2-camera(2): Setting port info for port 'Universal Serial Bus' at 'usb:001,005'...
0.217304 gphoto2-port(2): Setting timeout to 5000 millisecond(s)...
0.217318 gphoto2-port(2): Setting settings...
0.217327 libusb(2): gp_port_usb_update(old int=0, conf=-1, alt=-1), (new int=0, conf=-1, alt=-1)
0.217336 gphoto2-setting(2): Setting key 'port' to value 'usb:001,005' (gphoto2)
0.217345 gphoto2-setting(2): Saving 4 setting(s) to file "/home/david/.gphoto/settings"
0.217489 gphoto2-camera(2): Initializing camera...
0.217506 gphoto2-port-usb(1): Looking for USB device (vendor 0x4a9, product 0x31cf)... found.
0.217518 gphoto2-port-usb(2): inep to look for is 81
0.217526 gphoto2-port-usb(1): Detected defaults: config 1, interface 0, altsetting 0, inep 81, outep 02, intep 83, class 06, subclass 01
0.217535 gphoto2-camera(2): Loading '/usr/lib/libgphoto2/2.4.10.1/ptp2'...
0.217732 gphoto2-port(2): Opening USB port...
0.217744 libusb(2): gp_port_usb_open()
0.217771 libusb(2): claiming interface 0
0.217793 ptp2(2): maxpacketsize 512
0.218546 gphoto2-port(2): Setting timeout to 1500 millisecond(s)...
0.218560 ptp(2): PTP: Opening session
0.218572 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.218583 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................
0.218678 ptp2/ptp_usb_getresp(2): reading response
0.218690 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.218700 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.220052 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.220069 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-00 00 00 00 ....... ....
0.220081 gphoto2-port(2): Setting timeout to 20000 millisecond(s)...
0.220092 gphoto2-port(2): Writing 12=0xc byte(s) to port...
0.220102 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 01 00 01 10-01 00 00 00 ............
0.220169 ptp2/ptp_usb_getdata(2): reading data
0.220179 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.220188 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.222673 gphoto2-port(2): Could only read 383 out of 512 byte(s)
0.222689 gphoto2-port(3): Hexdump of 383 = 0x17f bytes follows:
0000 7f 01 00 00 02 00 01 10-01 00 00 00 64 00 06 00 ............d...
0010 00 00 c8 00 00 00 00 4f-00 00 00 14 10 15 10 16 .......O........
0020 10 01 10 02 10 03 10 06-10 04 10 01 91 05 10 02 ................
0030 91 07 10 08 10 03 91 09-10 04 91 0a 10 1b 10 07 ................
0040 91 0c 10 0d 10 0b 10 05-91 0f 10 06 91 10 91 27 ...............'
0050 91 0b 91 08 91 09 91 0c-91 0e 91 0f 91 25 91 26 .............%.&
0060 91 15 91 14 91 13 91 16-91 17 91 20 91 f0 91 18 ........... ....
0070 91 21 91 f1 91 1d 91 0a-91 1b 91 1c 91 1e 91 1a .!..............
0080 91 53 91 54 91 60 91 55-91 57 91 58 91 59 91 5a .S.T.`.U.W.X.Y.Z
0090 91 1f 91 fe 91 ff 91 28-91 29 91 2d 91 2e 91 2f .......(.).-.../
00a0 91 01 98 02 98 03 98 04-98 05 98 52 90 53 90 57 ...........R.S.W
00b0 90 58 90 59 90 5a 90 5f-90 07 00 00 00 09 40 04 .X.Y.Z._......@.
00c0 40 05 40 03 40 02 40 07-40 01 c1 03 00 00 00 02 @.@.@.@.@.......
00d0 d4 07 d4 06 d4 01 00 00-00 01 38 0b 00 00 00 01 ..........8.....
00e0 30 02 30 06 30 0a 30 08-30 01 38 01 b1 03 b1 02 0.0.0.0.0.8.....
00f0 bf 00 38 04 b1 0b 43 00-61 00 6e 00 6f 00 6e 00 ..8...C.a.n.o.n.
0100 20 00 49 00 6e 00 63 00-2e 00 00 00 0f 43 00 61 .I.n.c......C.a
0110 00 6e 00 6f 00 6e 00 20-00 45 00 4f 00 53 00 20 .n.o.n. .E.O.S.
0120 00 35 00 30 00 30 00 44-00 00 00 08 33 00 2d 00 .5.0.0.D....3.-.
0130 31 00 2e 00 31 00 2e 00-30 00 00 00 21 38 00 34 1...1...0...!8.4
0140 00 38 00 36 00 61 00 62-00 32 00 39 00 63 00 36 .8.6.a.b.2.9.c.6
0150 00 38 00 35 00 34 00 37-00 31 00 35 00 39 00 32 .8.5.4.7.1.5.9.2
0160 00 34 00 32 00 33 00 37-00 30 00 64 00 35 00 35 .4.2.3.7.0.d.5.5
0170 00 36 00 33 00 31 00 30-00 31 00 61 00 00 00 .6.3.1.0.1.a...
0.222715 ptp2/ptp_usb_getresp(2): reading response
0.222724 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.222732 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.223419 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.223431 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-01 00 00 00 ....... ....
0.223452 PTP2/ptp2/library.c(2): Device info:
0.223461 PTP2/ptp2/library.c(2): Manufacturer: Canon Inc.
0.223469 PTP2/ptp2/library.c(2): Model: Canon EOS 500D
0.223477 PTP2/ptp2/library.c(2): device version: 3-1.1.0
0.223485 PTP2/ptp2/library.c(2): serial number: '8486ab29c68547159242370d5563101a'
0.223494 PTP2/ptp2/library.c(2): Vendor extension ID: 0x0000000b
0.223502 PTP2/ptp2/library.c(2): Vendor extension version: 200
0.223510 PTP2/ptp2/library.c(2): Vendor extension description: (null)
0.223520 PTP2/ptp2/library.c(2): Functional Mode: 0x0000
0.223528 PTP2/ptp2/library.c(2): PTP Standard Version: 100
0.223536 PTP2/ptp2/library.c(2): Supported operations:
0.223544 PTP2/ptp2/library.c(2): 0x1014
0.223552 PTP2/ptp2/library.c(2): 0x1015
0.223560 PTP2/ptp2/library.c(2): 0x1016
0.223568 PTP2/ptp2/library.c(2): 0x1001
0.223576 PTP2/ptp2/library.c(2): 0x1002
0.223584 PTP2/ptp2/library.c(2): 0x1003
0.223592 PTP2/ptp2/library.c(2): 0x1006
0.223600 PTP2/ptp2/library.c(2): 0x1004
0.223608 PTP2/ptp2/library.c(2): 0x9101
0.223617 PTP2/ptp2/library.c(2): 0x1005
0.223625 PTP2/ptp2/library.c(2): 0x9102
0.223633 PTP2/ptp2/library.c(2): 0x1007
0.223641 PTP2/ptp2/library.c(2): 0x1008
0.223649 PTP2/ptp2/library.c(2): 0x9103
0.223657 PTP2/ptp2/library.c(2): 0x1009
0.223665 PTP2/ptp2/library.c(2): 0x9104
0.223673 PTP2/ptp2/library.c(2): 0x100a
0.223681 PTP2/ptp2/library.c(2): 0x101b
0.223689 PTP2/ptp2/library.c(2): 0x9107
0.223697 PTP2/ptp2/library.c(2): 0x100c
0.223705 PTP2/ptp2/library.c(2): 0x100d
0.223713 PTP2/ptp2/library.c(2): 0x100b
0.223721 PTP2/ptp2/library.c(2): 0x9105
0.223729 PTP2/ptp2/library.c(2): 0x100f
0.223737 PTP2/ptp2/library.c(2): 0x9106
0.223745 PTP2/ptp2/library.c(2): 0x9110
0.223753 PTP2/ptp2/library.c(2): 0x9127
0.223761 PTP2/ptp2/library.c(2): 0x910b
0.223769 PTP2/ptp2/library.c(2): 0x9108
0.223777 PTP2/ptp2/library.c(2): 0x9109
0.223785 PTP2/ptp2/library.c(2): 0x910c
0.223793 PTP2/ptp2/library.c(2): 0x910e
0.223801 PTP2/ptp2/library.c(2): 0x910f
0.223809 PTP2/ptp2/library.c(2): 0x9125
0.223817 PTP2/ptp2/library.c(2): 0x9126
0.223825 PTP2/ptp2/library.c(2): 0x9115
0.223834 PTP2/ptp2/library.c(2): 0x9114
0.223841 PTP2/ptp2/library.c(2): 0x9113
0.223849 PTP2/ptp2/library.c(2): 0x9116
0.223857 PTP2/ptp2/library.c(2): 0x9117
0.223865 PTP2/ptp2/library.c(2): 0x9120
0.223874 PTP2/ptp2/library.c(2): 0x91f0
0.223882 PTP2/ptp2/library.c(2): 0x9118
0.223890 PTP2/ptp2/library.c(2): 0x9121
0.223898 PTP2/ptp2/library.c(2): 0x91f1
0.223906 PTP2/ptp2/library.c(2): 0x911d
0.223914 PTP2/ptp2/library.c(2): 0x910a
0.223922 PTP2/ptp2/library.c(2): 0x911b
0.223930 PTP2/ptp2/library.c(2): 0x911c
0.223938 PTP2/ptp2/library.c(2): 0x911e
0.223945 PTP2/ptp2/library.c(2): 0x911a
0.223959 PTP2/ptp2/library.c(2): 0x9153
0.223967 PTP2/ptp2/library.c(2): 0x9154
0.223975 PTP2/ptp2/library.c(2): 0x9160
0.223983 PTP2/ptp2/library.c(2): 0x9155
0.223991 PTP2/ptp2/library.c(2): 0x9157
0.223999 PTP2/ptp2/library.c(2): 0x9158
0.224007 PTP2/ptp2/library.c(2): 0x9159
0.224015 PTP2/ptp2/library.c(2): 0x915a
0.224023 PTP2/ptp2/library.c(2): 0x911f
0.224031 PTP2/ptp2/library.c(2): 0x91fe
0.224039 PTP2/ptp2/library.c(2): 0x91ff
0.224046 PTP2/ptp2/library.c(2): 0x9128
0.224054 PTP2/ptp2/library.c(2): 0x9129
0.224062 PTP2/ptp2/library.c(2): 0x912d
0.224070 PTP2/ptp2/library.c(2): 0x912e
0.224078 PTP2/ptp2/library.c(2): 0x912f
0.224086 PTP2/ptp2/library.c(2): 0x9801
0.224094 PTP2/ptp2/library.c(2): 0x9802
0.224102 PTP2/ptp2/library.c(2): 0x9803
0.224110 PTP2/ptp2/library.c(2): 0x9804
0.224117 PTP2/ptp2/library.c(2): 0x9805
0.224125 PTP2/ptp2/library.c(2): 0x9052
0.224133 PTP2/ptp2/library.c(2): 0x9053
0.224141 PTP2/ptp2/library.c(2): 0x9057
0.224149 PTP2/ptp2/library.c(2): 0x9058
0.224157 PTP2/ptp2/library.c(2): 0x9059
0.224165 PTP2/ptp2/library.c(2): 0x905a
0.224173 PTP2/ptp2/library.c(2): 0x905f
0.224180 PTP2/ptp2/library.c(2): Events Supported:
0.224188 PTP2/ptp2/library.c(2): 0x4009
0.224196 PTP2/ptp2/library.c(2): 0x4004
0.224204 PTP2/ptp2/library.c(2): 0x4005
0.224212 PTP2/ptp2/library.c(2): 0x4003
0.224220 PTP2/ptp2/library.c(2): 0x4002
0.224228 PTP2/ptp2/library.c(2): 0x4007
0.224235 PTP2/ptp2/library.c(2): 0xc101
0.224243 PTP2/ptp2/library.c(2): Device Properties Supported:
0.224251 PTP2/ptp2/library.c(2): 0xd402
0.224259 PTP2/ptp2/library.c(2): 0xd407
0.224267 PTP2/ptp2/library.c(2): 0xd406
0.224329 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.224340 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-02 00 00 00 01 30 00 00 .............0..
0.224419 ptp2/ptp_usb_getdata(2): reading data
0.224429 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.224439 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.226419 gphoto2-port(2): Could only read 36 out of 512 byte(s)
0.226433 gphoto2-port(3): Hexdump of 36 = 0x24 bytes follows:
0000 24 00 00 00 02 00 01 98-02 00 00 00 0a 00 00 00 $...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc - ....
0.226443 ptp2/ptp_usb_getresp(2): reading response
0.226452 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.226461 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.226669 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.226681 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-02 00 00 00 ....... ....
0.226699 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.226710 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-03 00 00 00 02 30 00 00 .............0..
0.227041 ptp2/ptp_usb_getdata(2): reading data
0.227051 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.227060 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.228175 gphoto2-port(2): Could only read 36 out of 512 byte(s)
0.228193 gphoto2-port(3): Hexdump of 36 = 0x24 bytes follows:
0000 24 00 00 00 02 00 01 98-03 00 00 00 0a 00 00 00 $...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc - ....
0.228209 ptp2/ptp_usb_getresp(2): reading response
0.228221 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.228235 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.228553 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.228574 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-03 00 00 00 ....... ....
0.228599 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.228614 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-04 00 00 00 06 30 00 00 .............0..
0.228923 ptp2/ptp_usb_getdata(2): reading data
0.228943 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.228957 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.230051 gphoto2-port(2): Could only read 36 out of 512 byte(s)
0.230070 gphoto2-port(3): Hexdump of 36 = 0x24 bytes follows:
0000 24 00 00 00 02 00 01 98-04 00 00 00 0a 00 00 00 $...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc - ....
0.230086 ptp2/ptp_usb_getresp(2): reading response
0.230099 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.230112 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.230426 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.230443 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-04 00 00 00 ....... ....
0.230467 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.230483 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-05 00 00 00 0a 30 00 00 .............0..
0.230673 ptp2/ptp_usb_getdata(2): reading data
0.230688 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.230702 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.231800 gphoto2-port(2): Could only read 54 out of 512 byte(s)
0.231818 gphoto2-port(3): Hexdump of 54 = 0x36 bytes follows:
0000 36 00 00 00 02 00 01 98-05 00 00 00 13 00 00 00 6...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc 87 dc 88 dc-89 dc 97 de 9b de 9c de ................
0030 9a de 93 de 94 de - ......
0.231833 ptp2/ptp_usb_getresp(2): reading response
0.231846 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.231859 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.232175 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.232192 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-05 00 00 00 ....... ....
0.232220 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.232236 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-06 00 00 00 08 30 00 00 .............0..
0.232547 ptp2/ptp_usb_getdata(2): reading data
0.232563 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.232578 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.233674 gphoto2-port(2): Could only read 44 out of 512 byte(s)
0.233697 gphoto2-port(3): Hexdump of 44 = 0x2c bytes follows:
0000 2c 00 00 00 02 00 01 98-06 00 00 00 0e 00 00 00 ,...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc 89 dc 9a de-93 de 94 de ............
0.233713 ptp2/ptp_usb_getresp(2): reading response
0.233725 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.233739 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.234052 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.234071 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-06 00 00 00 ....... ....
0.234097 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.234112 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-07 00 00 00 01 38 00 00 .............8..
0.234298 ptp2/ptp_usb_getdata(2): reading data
0.234313 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.234327 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.235425 gphoto2-port(2): Could only read 42 out of 512 byte(s)
0.235443 gphoto2-port(3): Hexdump of 42 = 0x2a bytes follows:
0000 2a 00 00 00 02 00 01 98-07 00 00 00 0d 00 00 00 *...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc 87 dc 88 dc-d3 dc ..........
0.235458 ptp2/ptp_usb_getresp(2): reading response
0.235471 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.235484 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.235800 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.235817 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-07 00 00 00 ....... ....
0.235848 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.235900 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-08 00 00 00 01 b1 00 00 ................
0.236047 ptp2/ptp_usb_getdata(2): reading data
0.236062 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.236076 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.237175 gphoto2-port(2): Could only read 36 out of 512 byte(s)
0.237193 gphoto2-port(3): Hexdump of 36 = 0x24 bytes follows:
0000 24 00 00 00 02 00 01 98-08 00 00 00 0a 00 00 00 $...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc - ....
0.237209 ptp2/ptp_usb_getresp(2): reading response
0.237222 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.237235 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.237550 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.237567 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-08 00 00 00 ....... ....
0.237591 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.237606 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-09 00 00 00 03 b1 00 00 ................
0.237923 ptp2/ptp_usb_getdata(2): reading data
0.237938 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.237952 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.239050 gphoto2-port(2): Could only read 36 out of 512 byte(s)
0.239067 gphoto2-port(3): Hexdump of 36 = 0x24 bytes follows:
0000 24 00 00 00 02 00 01 98-09 00 00 00 0a 00 00 00 $...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc - ....
0.239083 ptp2/ptp_usb_getresp(2): reading response
0.239095 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.239109 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.239427 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.239446 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-09 00 00 00 ....... ....
0.239470 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.239485 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-0a 00 00 00 02 bf 00 00 ................
0.239673 ptp2/ptp_usb_getdata(2): reading data
0.239688 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.239702 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.240802 gphoto2-port(2): Could only read 36 out of 512 byte(s)
0.240820 gphoto2-port(3): Hexdump of 36 = 0x24 bytes follows:
0000 24 00 00 00 02 00 01 98-0a 00 00 00 0a 00 00 00 $...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc - ....
0.240835 ptp2/ptp_usb_getresp(2): reading response
0.240848 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.240861 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.241174 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.241192 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-0a 00 00 00 ....... ....
0.241215 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.241230 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-0b 00 00 00 00 38 00 00 .............8..
0.241548 ptp2/ptp_usb_getdata(2): reading data
0.241563 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.241577 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.242675 gphoto2-port(2): Could only read 42 out of 512 byte(s)
0.242694 gphoto2-port(3): Hexdump of 42 = 0x2a bytes follows:
0000 2a 00 00 00 02 00 01 98-0b 00 00 00 0d 00 00 00 *...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc 87 dc 88 dc-d3 dc ..........
0.242710 ptp2/ptp_usb_getresp(2): reading response
0.242729 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.242743 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.243051 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.243069 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-0b 00 00 00 ....... ....
0.243093 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.243108 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 01 98-0c 00 00 00 04 b1 00 00 ................
0.243298 ptp2/ptp_usb_getdata(2): reading data
0.243313 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.243327 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.244426 gphoto2-port(2): Could only read 54 out of 512 byte(s)
0.244447 gphoto2-port(3): Hexdump of 54 = 0x36 bytes follows:
0000 36 00 00 00 02 00 01 98-0c 00 00 00 13 00 00 00 6...............
0010 01 dc 02 dc 03 dc 04 dc-07 dc 0b dc 41 dc 44 dc ............A.D.
0020 08 dc 09 dc 87 dc 88 dc-89 dc 97 de 9b de 9c de ................
0030 9a de 93 de 94 de - ......
0.244463 ptp2/ptp_usb_getresp(2): reading response
0.244475 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.244489 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.244801 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.244820 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-0c 00 00 00 ....... ....
0.244858 gphoto2-port(2): Writing 12=0xc byte(s) to port...
0.244874 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 01 00 04 10-0d 00 00 00 ............
0.245047 ptp2/ptp_usb_getdata(2): reading data
0.245062 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.245076 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.246174 gphoto2-port(2): Could only read 20 out of 512 byte(s)
0.246193 gphoto2-port(3): Hexdump of 20 = 0x14 bytes follows:
0000 14 00 00 00 02 00 04 10-0d 00 00 00 01 00 00 00 ................
0010 01 00 02 00 - ....
0.246208 ptp2/ptp_usb_getresp(2): reading response
0.246220 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.246233 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.246924 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.246942 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-0d 00 00 00 ....... ....
0.246962 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.246977 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 05 10-0e 00 00 00 01 00 02 00 ................
0.247048 ptp2/ptp_usb_getdata(2): reading data
0.247063 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.247077 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.248424 gphoto2-port(2): Could only read 48 out of 512 byte(s)
0.248442 gphoto2-port(3): Hexdump of 48 = 0x30 bytes follows:
0000 30 00 00 00 02 00 05 10-0e 00 00 00 04 00 03 00 0...............
0010 00 00 00 00 68 e6 01 00-00 00 00 80 a8 29 00 00 ....h........)..
0020 00 00 ff ff ff ff 03 53-00 44 00 00 00 00 00 00 .......S.D......
0.248457 ptp2/ptp_usb_getresp(2): reading response
0.248470 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.248483 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.249178 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.249204 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-0e 00 00 00 ....... ....
0.249241 gphoto2-port(2): Writing 12=0xc byte(s) to port...
0.249257 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 01 00 01 10-0f 00 00 00 ............
0.249424 ptp2/ptp_usb_getdata(2): reading data
0.249439 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.249454 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.251051 gphoto2-port(2): Could only read 383 out of 512 byte(s)
0.251075 gphoto2-port(3): Hexdump of 383 = 0x17f bytes follows:
0000 7f 01 00 00 02 00 01 10-0f 00 00 00 64 00 06 00 ............d...
0010 00 00 c8 00 00 00 00 4f-00 00 00 14 10 15 10 16 .......O........
0020 10 01 10 02 10 03 10 06-10 04 10 01 91 05 10 02 ................
0030 91 07 10 08 10 03 91 09-10 04 91 0a 10 1b 10 07 ................
0040 91 0c 10 0d 10 0b 10 05-91 0f 10 06 91 10 91 27 ...............'
0050 91 0b 91 08 91 09 91 0c-91 0e 91 0f 91 25 91 26 .............%.&
0060 91 15 91 14 91 13 91 16-91 17 91 20 91 f0 91 18 ........... ....
0070 91 21 91 f1 91 1d 91 0a-91 1b 91 1c 91 1e 91 1a .!..............
0080 91 53 91 54 91 60 91 55-91 57 91 58 91 59 91 5a .S.T.`.U.W.X.Y.Z
0090 91 1f 91 fe 91 ff 91 28-91 29 91 2d 91 2e 91 2f .......(.).-.../
00a0 91 01 98 02 98 03 98 04-98 05 98 52 90 53 90 57 ...........R.S.W
00b0 90 58 90 59 90 5a 90 5f-90 07 00 00 00 09 40 04 .X.Y.Z._......@.
00c0 40 05 40 03 40 02 40 07-40 01 c1 03 00 00 00 02 @.@.@.@.@.......
00d0 d4 07 d4 06 d4 01 00 00-00 01 38 0b 00 00 00 01 ..........8.....
00e0 30 02 30 06 30 0a 30 08-30 01 38 01 b1 03 b1 02 0.0.0.0.0.8.....
00f0 bf 00 38 04 b1 0b 43 00-61 00 6e 00 6f 00 6e 00 ..8...C.a.n.o.n.
0100 20 00 49 00 6e 00 63 00-2e 00 00 00 0f 43 00 61 .I.n.c......C.a
0110 00 6e 00 6f 00 6e 00 20-00 45 00 4f 00 53 00 20 .n.o.n. .E.O.S.
0120 00 35 00 30 00 30 00 44-00 00 00 08 33 00 2d 00 .5.0.0.D....3.-.
0130 31 00 2e 00 31 00 2e 00-30 00 00 00 21 38 00 34 1...1...0...!8.4
0140 00 38 00 36 00 61 00 62-00 32 00 39 00 63 00 36 .8.6.a.b.2.9.c.6
0150 00 38 00 35 00 34 00 37-00 31 00 35 00 39 00 32 .8.5.4.7.1.5.9.2
0160 00 34 00 32 00 33 00 37-00 30 00 64 00 35 00 35 .4.2.3.7.0.d.5.5
0170 00 36 00 33 00 31 00 30-00 31 00 61 00 00 00 .6.3.1.0.1.a...
0.251101 ptp2/ptp_usb_getresp(2): reading response
0.251113 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.251127 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.251801 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.251819 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-0f 00 00 00 ....... ....
0.251843 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.251859 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 14 10-10 00 00 00 02 d4 00 00 ................
0.251923 ptp2/ptp_usb_getdata(2): reading data
0.251938 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.251952 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.253300 gphoto2-port(2): Could only read 80 out of 512 byte(s)
0.253320 gphoto2-port(3): Hexdump of 80 = 0x50 bytes follows:
0000 50 00 00 00 02 00 14 10-10 00 00 00 02 d4 ff ff P...............
0010 00 0f 43 00 61 00 6e 00-6f 00 6e 00 20 00 45 00 ..C.a.n.o.n. .E.
0020 4f 00 53 00 20 00 35 00-30 00 30 00 44 00 00 00 O.S. .5.0.0.D...
0030 0f 43 00 61 00 6e 00 6f-00 6e 00 20 00 45 00 4f .C.a.n.o.n. .E.O
0040 00 53 00 20 00 35 00 30-00 30 00 44 00 00 00 00 .S. .5.0.0.D....
0.253336 ptp2/ptp_usb_getresp(2): reading response
0.253348 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.253362 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.254051 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.254069 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-10 00 00 00 ....... ....
0.254106 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.254122 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 14 10-11 00 00 00 07 d4 00 00 ................
0.254174 ptp2/ptp_usb_getdata(2): reading data
0.254188 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.254203 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.255551 gphoto2-port(2): Could only read 26 out of 512 byte(s)
0.255571 gphoto2-port(3): Hexdump of 26 = 0x1a bytes follows:
0000 1a 00 00 00 02 00 14 10-11 00 00 00 07 d4 06 00 ................
0010 00 01 00 00 00 01 00 00-00 00 ..........
0.255586 ptp2/ptp_usb_getresp(2): reading response
0.255599 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.255612 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.256304 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.256326 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-11 00 00 00 ....... ....
0.256357 gphoto2-port(2): Writing 16=0x10 byte(s) to port...
0.256372 gphoto2-port(3): Hexdump of 16 = 0x10 bytes follows:
0000 10 00 00 00 01 00 14 10-12 00 00 00 06 d4 00 00 ................
0.256421 ptp2/ptp_usb_getdata(2): reading data
0.256436 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.256450 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.257925 gphoto2-port(2): Could only read 92 out of 512 byte(s)
0.257944 gphoto2-port(3): Hexdump of 92 = 0x5c bytes follows:
0000 5c 00 00 00 02 00 14 10-12 00 00 00 06 d4 ff ff \...............
0010 01 12 55 00 6e 00 6b 00-6e 00 6f 00 77 00 6e 00 ..U.n.k.n.o.w.n.
0020 20 00 49 00 6e 00 69 00-74 00 69 00 61 00 74 00 .I.n.i.t.i.a.t.
0030 6f 00 72 00 00 00 12 55-00 6e 00 6b 00 6e 00 6f o.r....U.n.k.n.o
0040 00 77 00 6e 00 20 00 49-00 6e 00 69 00 74 00 69 .w.n. .I.n.i.t.i
0050 00 61 00 74 00 6f 00 72-00 00 00 00 .a.t.o.r....
0.257961 ptp2/ptp_usb_getresp(2): reading response
0.257974 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.257988 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.258674 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.258691 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-12 00 00 00 ....... ....
0.259716 gp-camera(2): Freeing camera...
0.259735 gphoto2-camera(2): Exiting camera ('Canon EOS 500D')...
0.259758 gphoto2-port(2): Writing 12=0xc byte(s) to port...
0.259774 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 01 00 03 10-13 00 00 00 ............
0.259926 ptp2/ptp_usb_getresp(2): reading response
0.259944 ptp2/ptp_usb_getpacket(2): getting next ptp packet
0.259959 gphoto2-port(2): Reading 512=0x200 bytes from port...
0.261177 gphoto2-port(2): Could only read 12 out of 512 byte(s)
0.261195 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows:
0000 0c 00 00 00 03 00 01 20-13 00 00 00 ....... ....
0.261213 gphoto2-port(2): Clear halt...
0.261301 gphoto2-port(2): Clear halt...
0.261425 gphoto2-port(2): Clear halt...
0.261548 gphoto2-port(2): Closing port...
0.261631 gphoto2-filesystem(2): resetting filesystem
0.261647 libgphoto2/gphoto2-filesys.c(2): Clearing fscache LRU list...
0.261658 libgphoto2/gphoto2-filesys.c(2): fscache LRU list already empty
0.261670 gphoto2-filesystem(2): Internally deleting all folders from '/'...
0.261683 gphoto2-filesystem(2): Lookup folder '/'...
0.261695 gphoto2-filesystem(2): Found! / is 0xe263e0
0.261710 gphoto2-filesystem(2): Recurse delete folder 0xe263e0//
0.261726 gphoto2-port(2): Freeing port...
0.261741 gphoto2-port(2): Closing port...
0.261798 gphoto2-filesystem(2): resetting filesystem
0.261813 libgphoto2/gphoto2-filesys.c(2): Clearing fscache LRU list...
0.261825 libgphoto2/gphoto2-filesys.c(2): fscache LRU list already empty
0.261836 gphoto2-filesystem(2): Internally deleting all folders from '/'...
0.261848 gphoto2-filesystem(2): Lookup folder '/'...
0.261860 gphoto2-filesystem(2): Found! / is 0xe263e0
0.261872 gphoto2-filesystem(2): Recurse delete folder 0xe263e0//
lsusb | grep Canon
Bus 001 Device 005: ID 04a9:31cf Canon, Inc.
ls -lR of /dev/bus/usb/001
total 0
drwxr-xr-x 2 root root 80 Dec 25 12:54 .
drwxr-xr-x 10 root root 200 Dec 25 12:19 ..
crw-rw-r-- 1 root root 189, 0 Dec 25 12:19 001
crw-rw----+ 1 root camera 189, 4 Dec 25 13:13 005
[root@dreki 001]# ls -lR
total 0
crw-rw-r-- 1 root root 189, 0 Dec 25 12:19 001
crw-rw----+ 1 root camera 189, 4 Dec 25 13:13 005
I am member of group "camera"Have you tried 'sudo gphoto2 --get-all-files' as a user or were you doing this as root?
The errors mentions /dev/bus/usb/002/003 and your camera seems to be /dev/bus/usb/001/005. If I'm on the right track, check what device is this /dev/bus/usb/002/003.
Last edited by karol (2011-12-25 14:48:40) -
I need to emulate several ActiveX functions in my client's web application. I have located several Mozilla web pages that describe how to do the things I need, and I have attempted to implement those instructions. However, I can't seem to get past the first line of code. In my web page, I am calling a JavaScript function using the onLoad attribute of the <body> tag. I am using the Navigator object to determine that the browser is Firefox. I then attempt to access the extension classes using the following code on lines 51 and 52 of the Download.js file:
var C = Components;
var CC = C.classes;
The Web Console gives me these two messages:
[13:51:55.621] The Components object is deprecated. It will soon be removed. @ http://distribution:781/NewDDI/DownLoad.js:51
[13:51:55.621] Error: Permission denied to access property 'classes' @ http://distribution:781/NewDDI/DownLoad.js:52
How do I enable adequate permission to be able to access the Components classes?I think Components is available only in extensions (or otherwise privileged code) and not in ordinary web pages.
-
Recently I've had trouble either when I try to login to facebook or after I've logged in. Usually, it's a page that says "access denied" and follows with a statement similar to not having permission to access facebook on this server. It doesn't happen every time but when it does I try various ways to get back to my facebook page...usually I can google facebook and login that way. Today it won't let me do that either. Does anyone know what this means? I don't know hardly a thing about computer technology so I don't even know where to start. Thanks!
.usually I can google facebook and login that way.
Create a Bookmark for Facebook. Don't go via Google.
If you are using Safari... go to the Safari menu bar click Safari / Preferences then select the Security tab.
Click: Show Cookies
Delete all Facebook cookies.
Now from the menu bar again click Safari / Empty Cache.
Restart your Mac, launch Safari, try Facebook.
If you still have problems, quit Safari.
Open Keychain Access /Applications/Utilities
Select Passwords on the left.
Delete the Facebook and Safari Forms Autofill keychains. Now go to the menu bar top of your screen click Keychain Access / Keychain First Aid. Enter your admin password on the left then click Verify and Repair if necessary.
Relaunch Safari. Go to Facebook. Login with your user name and password. You should be prompted to save that data to a new keychain. Click Yes. -
Can't access/mount hard drive, Permission denied message in Disk Utility.
Hello,
Need some help here. I was upgrading from 10.4 to 10.5. I got an error message when I tried to upgrade from the DVD. My hard drive had an exclamation mark by it and I was told I would need to erase it in order to install. When I tried quitting the installer, I had to go through startup disk to pick my Hard drive, which showed it had 10.4 installed. When I tried restarting, it would only boot off of the DVD. I checked startup disk again, but my hard drive was now not visible. I have a tower with a back-up system on it. When I picked it, it started up fine. I went under disk utility and the hard drive is listed, but is ghosted/grayed out. Repair & Verify Disk permissions are ghosted back as well.When I try to repair or verify disk, it says it can't it gives me the disk number and sector number and Permission Denied. I poked around on disk utility for info, and it looks like it doesn't have a mount point anymore and under permissions, it says that they are not enabled. So, apparently the access privileges have been erased & I don't know how to mount my disk again. I'm assuming I need some sort of commmand line in Terminal to restore my priveleges or get it to auto-mount. I do not want to erase my drive to upgrade. All my applications are on that drive. Please help!
Message was edited by: koobiakSee if Niel's User Tip can help you: I accidentally set a disk's permissions to No Access .
-
Hello Community
Using SharePoint 2010 Server and UI, a web application
was created with subsites.
The subsites have unique permissions and Owner, Member
and Visitor groups.
The problem is however even if a user does not exist
in a group that user can access the top link bar/navigation
bar and its sub sites.
Also any user in any group can access any top link bar/navigation bar and its subsites.
How do you enforce that if a user is not in a group
they are denied access the top link bar/navigation bar and its
subsites?
Thank you
ShabeautIf you are using the built in SharePoint navigation links, SharePoint will automatically hide links to sites that a given user doesn't have access to.
The problem is, it sounds to me like you have a fixed top link bar that lists the content and if a user doesn't have access, the link still shows up.
You may want to look at how the top link bar was encapsulated in the design of the page. If it isn't wrapped in the permissions provider code, that could be the problem.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint -
Javascript Application Permission denied to access property '$'
I can't figure out what is causing this error message. At first I would get JavaScript Application $ is not defined so I disabled plug ins and add-ons (only two of those on this computer) and I thought I had figured out what was causing the second error message but then today the permission denied message popped up. I only have two plugins activated, one for adobe and one for shockwave. As for the addins, I use the same ones on my laptop and don't get this error message.
Any help would be extremely appreciated!
Computer is 32bit Windows 7 Dell PCTo avoid confusion, JavaScript isn't related to a plugin:
*http://kb.mozillazine.org/JavaScript_is_not_Java
Is this happening on secure (https) web pages or on a page opened via a normal connection?
You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Time Machine Backup Files Access Permission Denied
I have a white MacBook (2.4 GHz Intel Core 2 Duo, 4GB 667 Mhz DDR2 SDRAM, 500gb internal hard drive, 1TB external Western Digital hard drive for backup) running Snow Leopard (OS 10.6.8). Due to recent problem with my iPhone and Address Book, I need to restore on my desktop the "Main Identity" folder in MS Outlook 2011. When I attempted to use Time Machine and restore this file folder, the external drive was recognized and the restoration would launch, but after about 15 seconds into the restoration on my desktop, I would then receive an error message stating that "I do not have permission" to access this file. I first attempted using the "command I" option to unlock the folder and restore. This did not work. I then launched my Disk Utility app and repaired the internal hard drive, then the external drive and rebooted the computer after each repair. Unfortunately none of these attempts worked. I did some research online and found that this is a common problem which can be resolved by going into the Terminal app and typing the proper UNIX command text to fix this problem. Below you'll find a set of UNIX text from my attempt to fix this problem. Please advise how to fix this problem.
UNIX TERMINAL READOUT TEXT (ATTEMPT #1):
Last login: Mon Nov 21 13:39:59 on console
You have mail.
Marc-Salernos-MacBook:~ marcsalerno$ cd /Volumes/Elements-1TB
Marc-Salernos-MacBook:Elements-1TB marcsalerno$ ls -la
total 281752
drwxrwxr-x 13 marcsalerno marcsalerno 510 Aug 3 2009 .
drwxrwxrwt@ 4 root admin 136 Nov 21 13:40 ..
-rw-rw-r-- 1 marcsalerno marcsalerno 16 Aug 18 2008 .001ff35753e3
-rw-rw-r--@ 1 marcsalerno marcsalerno 12292 Nov 17 11:47 .DS_Store
drwxrwxr-x 3 marcsalerno marcsalerno 102 Dec 6 2008 .Spotlight-V100
-rw-rw-r--@ 1 marcsalerno marcsalerno 144232616 Mar 30 2011 .SymAVx86QSFile
drwxrwxr-x@ 3 marcsalerno marcsalerno 102 Mar 6 2009 .TemporaryItems
drwxrwxr-x@ 3 marcsalerno marcsalerno 102 Nov 16 10:59 .Trashes
-rw-rw-r-- 1 marcsalerno marcsalerno 0 Dec 7 2008 .com.apple.timemachine.supported
drwxrwxr-x 6369 marcsalerno marcsalerno 216546 Nov 21 13:35 .fseventsd
drwxrwxr-x 4 marcsalerno marcsalerno 136 Nov 16 15:07 Backups.backupdb
Marc-Salernos-MacBook:Elements-1TB marcsalerno$ sudo chown 'id -un' Elements-1TB
Password:
chown: id -un: Invalid argument
Marc-Salernos-MacBook:Elements-1TB marcsalerno$ sudo chmod 400 Elements-1TB
chmod: Elements-1TB: No such file or directory
Marc-Salernos-MacBook:Elements-1TB marcsalerno$ sudo chown 'id -un' Elements-1TB
chown: id -un: Invalid argument
Marc-Salernos-MacBook:Elements-1TB marcsalerno$
ATTEMPT #2 TO USE TERMINAL APP TO FIX THIS PROBLEM
Last login: Mon Nov 21 13:51:48 on ttys000
You have mail.
Marc-Salernos-MacBook:~ marcsalerno$
Marc-Salernos-MacBook:~ marcsalerno$ id
uid=501(marcsalerno) gid=501(marcsalerno) groups=501(marcsalerno),401(com.apple.access_screensharing),204(_developer),100 (_lpoperator),98(_lpadmin),80(admin),61(l ocalaccounts),12(everyone),402(com.apple.sharepoint.group.1)
Marc-Salernos-MacBook:~ marcsalerno$ ls -l /Volumes
total 8
drwxrwxr-x 13 marcsalerno marcsalerno 510 Aug 3 2009 Elements-1TB
lrwxr-xr-x 1 root admin 1 Nov 21 13:36 Mac500gb -> /
Marc-Salernos-MacBook:~ marcsalerno$ ls -l /Volumes/MyDiskName
ls: /Volumes/MyDiskName: No such file or directory
Marc-Salernos-MacBook:~ marcsalerno$ echo ---------------sudo chmod -R u+X /Volumes/Elements-1TB
---------------sudo chmod -R u+X /Volumes/Elements-1TB
Marc-Salernos-MacBook:~ marcsalerno$I have done as you suggested and clicked on the show original but I get this message " The volume cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again." I have the external disk already connected as that is what I am trying to recover the file from i.e. where I find the aliases. Any further suggestions. Thanks
-
Can not access web interface: Linux: permission denied
When starting my oracle-xe on centos5 it works but i can not open the web interface. During install i have configured it on port 81 and this is the error i get when starting the db:
30-MAY-2010 19:17:54 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
Error listening on: (Description=(Address=(Protocol=tcp)(Port=81)(Host=localhost))(Presentation=HTTP)(Session=RAW))
30-MAY-2010 19:17:57 * service_update * XE * 12546
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission deniedFirewall and seLinux are disbled.
I have installed oracle-xe as root and added root to the dba-group
What could be the issue for this?
Edited by: Yannick.O on May 30, 2010 10:35 AMYou have to use some port higher then 1024. Ports below 1024 are reserved for root user only.
-
MB Air (1.8GHz); MacOS 10.9.2
In the System Log I see frequent and, at times, continuous (up to several per second) entries like the following:
4/16/14 9:00:13.936 AM mDNSResponder[73]: ERROR: mDNSPlatformTCPConnect - connect failed: socket 63: Error 13 (Permission denied) length 16
While I can't point to any specific system issues that result from this, I do have the following (perhaps related, perhaps unrelated) problems:
1. Over time, memory pressure gradually increases until, every few days, I need to re-boot. I'm not accustomed to having to perform "maintenance boots" under MacOS. (For example, my Mac Mini, also running Mavericks, runs for weeks/months without needing to re-boot; it's my household media server, running iTunes but that's about it.) Feels like a memory leak to me.
2. TimeMachine is unpredictable for me. When I have TimeMachine enabled, it will do incremental backups for up to a day or so, then the machine ends up in what looks like a run loop, with apps (such as Mail) in a "not responding" state. Can't reliably force-quit those apps at that time - pretty much have to hard-boot the machine and restart. (Note that I'm using a QNAP NAS disk array; has worked fine in the past, pre Mavericks; I'm running latest/greatest NAS firmware.)
At any rate, any insights regarding the DNS error (what it means; what triggers it; whether I should care; if so, what I should do to quell it; etc.) deeply appreciated.
Doug EngferMay I ask why you want me to remove the AV software?
Because it's the likely cause of your problem, and even if it isn't, it's worse than useless.
1. This is a comment on what you should and should not do to protect yourself from malicious software ("malware") that circulates on the Internet. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to your computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
Software of any kind is distributed via BitTorrent. or Usenet, or on a website that also distributes pirated music or movies.
Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, your browser, or anything else.
Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
High-priced commercial software such as Photoshop is "cracked" or "free."
An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
Conditional or unsolicited offers from strangers
A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
You win a prize in a contest you never entered.
Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
Anything online that you would expect to pay for is "free."
Unexpected events
You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial "anti-virus" products?
To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. Research has shown that most successful attacks are "zero-day"—that is, previously unknown. Recognition-based malware scanners do not defend against such attacks.
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
Most importantly, a false sense of security makes you more vulnerable.
8. An anti-malware product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An anti-virus app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize by the file name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need any software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's seldom a reason to use recognition software unless an institutional policy requires it. Windows malware is so widespread that you should assume it's in every unknown email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may be useful if an ill-informed network administrator says you must run some kind of "anti-virus" application.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither should you assume that you will always be safe from exploitation, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. "Hmmmm, this torrent is a crack of that new game I want. I think I'll download it. It could be a trojan, but the antivirus will warn me if it is." Then they wonder why their Mac is so slow all of a sudden. It's slow because it's running flat out mining Bitcoins for a hacker who has already sold their credit card number and banking passwords to a criminal gang. Maybe a week later the antivirus does warn them, but what good does that do?
Nothing can lessen the need for safe computing practices. -
BUG:? "permission denied" error in generated javascript of af:table!
Hi,
In a JSF page with frames, the generated javascript event handlers (_tableSort and _navSubmit) of a af:table component raise a "permission denied" error in Internet Explorer.
After this error is raised, nothing work... links, command, etc. do not respond.
For example:
1.- Frameset page:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:af="http://xmlns.oracle.com/adf/faces">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<afh:html>
<afh:frameBorderLayout id="ttt">
<f:facet name="center">
<afh:frame source="http://myserver/myapp/faces/Welcome.jspx" height="500" width="500"
id="xxx" name="xxx"/>
</f:facet>
</afh:frameBorderLayout>
</afh:html>
</f:view>
</jsp:root>2.- And this is the http://myserver/myapp/faces/Welcome.jspx page (with af:table component):
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:af="http://xmlns.oracle.com/adf/faces">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<afh:html>
<afh:head title="Resultado Operacion">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body>
<h:form>
<af:table emptyText="No items were found"
value="#{MBDummy.listaPolizas}" var="row" rows="25">
<af:column sortable="false" headerText="Pol Prefijo"
formatType="text">
<af:outputText value="#{row.polPrefijo}"/>
</af:column>
<af:column sortable="false" headerText="Pol Secuencia"
formatType="text">
<af:outputText value="#{row.polSecuencia}"/>
</af:column>
</af:table>
</h:form>
</afh:body>
</afh:html>
</f:view>
</jsp:root>When I try to navigate through table pages, Interner Explorer raise the "Permission Denied" errorHi,
Did you ever get any reply to this? I'm now running into the exact same problem, for the exact same reason (app works fine--unless a containing window is being served off another host--then we get Permission Denied). Changing the hosting configuration is, unsurprisingly, not an option. Is there a way around this problem? This is a really critical piece for us.
Best,
Avrom
[edit: I have more information. This Javascript error is raised by a Javascript security feature and is intended to prevent cross-site scripting. If a frame's contents are served by a different server than the surrounding window, the contents of the frame are not allowed access to the other contents of the surrounding window.
Apparently, a number of ADF Faces components (including the table) have Javascript that attempts to access the top-level window...which means that you *cannot* run ADF faces in a situation like the one you described. Personally, I think that's an ADF Faces bug.
Our workaround is to abandon the idea of putting the app in a frame...we're going with either a popup or allowing the app to take over the window.]
Message was edited by:
Avrom -
hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.
See E-10 in the first link.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems
Maybe you are looking for
-
Share files between Arch Linux and XP Home
Hi, I have an Arch Linux desktop and a XP Home Laptop both connected to a Billion 7401 ADSL Router to get to the internet. If I am using any computer sometimes I have a need to use files from the other one, and from an external HDD connected to the X
-
Folio not opening in adobe content viewer
About a year ago, I created a magazine with Digital Publishing Suite for a college course and uploaded it to my ipad in Adobe Content Viewer. It was from a school computer and version of Indesign so I don't think I'd be able to reload the file onto t
-
Problem with HQL (Hibernate) Query using Netbeans 6.7.1
Hi. I have a database which possesses only one table. This table is called "Login" and has two columns: "username" and "password". I have inserted two rows in it, so it is not empty. Using HQL within Netbeans, I write the following query FROM LoginTh
-
HP 8500 All in One prints reddish color
My HP 8500 All in One Deskjet has started to print in all reddish color even though the cartridges appear full. I have run a cardridge head clean and a cardridge align and if I'd rather put my head through a plate glass window than have to talk to HP
-
Remote image change on rollover
I want to have a change of image in a different location to where the rollover image is. Any ideas?