Persistant Errors 4001 and 4010

I am just about at the end of my tether with iTunes Match. I have managed to get some 14500 of my songs sorted (although it did take me almost a week) but for the last few days I keep getting these 4001/4010 errors and never get as far as stage 3 (on rare occasions when I do, only one file out of 1000+ uploads). I know it's a lot of songs but I'm sure it's by no means the largest library people have tried to get on this Match thing. I've tried all of the solutions people have posted without success (including uninstall/reinstall, even turning off my virus propection/firewall which I am always reluctant to do) and it is now really getting my back up because I want to be able to access my music via iPhone when away from home. What the stuff is going on with Apple? There seem to be more people with Match problems than without! Anyone with a solution? Please, before I slit my wrists!

Seadragon01 - I'm having the same problem. I've been subscribed since around March with no problems, and this weekend out of the blue iTunes Match gave me an "unable to connect to iTunes Store" error and then proceded to upload 8 random songs to the cloud that had already been matched months ago. Then from that point, I cannot update iTunes Match at all without receiving that same error after about 3 minutes of loading.
Also worth noting, my iOS devices are working fine with iTunes Match. So all the songs that had been in the cloud since before this weekend are still accessible. But if I were to load a CD onto my computer right now in hopes of pushing it to the cloud, I would be out of luck.
I'll also state that I have changed NOTHING on either my computer or network that would have sparked this problem.

Similar Messages

DNS Server Errors 4015 and 4010

Hi all,
we have upgraded a 2003 Domain to 2012 R2. All DCs now are 2012 R2. The Domain and Forest Level are 2008. Be checking the Eventlogs of the DNS Server we found that we have DNS Error 4010 and 4015 Events repeatedly.
4015:
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
4010:
The DNS server was unable to create a resource record for f55ab78a-df8d-4c2c-8420-52dc8b5604e2._msdcs.domain.local. in zone Domain.local. The Active Directory definition of this resource record is corrupt or contains an invalid DNS name. The event data contains
the error.
We found that the Errors are available on oll DCs. The errors occurs only after the DNS Server Service are restartet on the DCs.
We check the dcdiag /e /test:dns with all PASS
We check the netlogon Service are successfully update be a restart the _.msdcs records in the Zone if the record are not present
We check the _msdcs.Domain.local Zone, it is in the forest Root Partition and AD integrated. We move it to the root of the DNS like the KB817470 describe
We check the dns by the Best Practices Analyzer, wihtout a error
We check the AD replication by repadmin without error
Thanks for help
Regards Steven

Hi,
Can you tell more information about the migration?
The roles that installed on windows server 2003 before migration. Is DNS role installed on it?
You can refer to this similar thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/55c7a4cd-2932-4b0e-bfd2-b043490df000/eventid-4010-dns-the-active-directory-definition-of-this-resource-record-is-corrupt-or-contains-an?forum=winserverDS

I tunes Match im getting error 4001?

Itunes Match im getting error 4001 and it will not let me match my songs.?

I found this possible fix on Google:
Open iTunes and click the Store tab on the menu bar.
Hold down the Option Key (⌥) and at the same time click ‘Turn Off iTunes Match’.
Click Store on the menu again, then click ‘Turn on iTunes Match’ (but don’t hold down anything this time, just click it).
This might not work for everyone but it’s worth a try.

Itunes Error 4001/4010

I can't upload any new songs to my iCloud. Wen i try i get either ''unknown error 4001'' or ''unknown error 4010''.
Any fixes???

Thanks for letting everyone knnow, that's really helpful. Fingers crossed, everyone... I want wonderful Michael Bublé matched and ready this Christmas!
Elliot

Exchange 2010 - Errors 4002 and Errors 4010

I have two CAS and two Mailbox servers. All are running Server 2008 R2 with Exchange 2010 SP3 RollUp 5.
On one of my mailbox servers i am getting the error every 5 minutes, MSExchange Availability 4002.
Process 4904: ProxyWebRequest CrossSite from S-1-1-0 to https://server.domain.org:443/ews/exchange.asmx failed. Caller SIDs: NetworkCredentials. The exception returned is Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequestProcessingException:
System.Web.Services.Protocols.SoapException: The authenticated user doesn't have sufficient privileges to issue this request.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.Proxy.Service.EndGetUserAvailability(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.FreeBusyApplication.EndProxyWebRequest(ProxyWebRequest proxyWebRequest, QueryList queryList, Service service, IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequest.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.AsyncWebRequest.EndInvokeWithErrorHandling(). The request information is ProxyWebRequest type = CrossSite, url = https://server.domain:443/ews/exchange.asmx
Mailbox list = <lastname, firstname>SMTP:user@Domain, Parameters: windowStart = 2/1/2014 12:00:00 AM, windowEnd = 4/1/2014 12:00:00 AM, MergedFBInterval = 30, RequestedView = FreeBusy
. ---> System.Web.Services.Protocols.SoapException: The authenticated user doesn't have sufficient privileges to issue this request.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.Proxy.Service.EndGetUserAvailability(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.FreeBusyApplication.EndProxyWebRequest(ProxyWebRequest proxyWebRequest, QueryList queryList, Service service, IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequest.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.AsyncWebRequest.EndInvokeWithErrorHandling()
   --- End of inner exception stack trace ---
. Name of the server where exception originated: Server. Make sure that the Active Directory site/forest that contain the user's mailbox has at least one local Exchange 2010 server running the Availability service. Turn up logging for the Availability
service and test basic network connectivity.
Every 10 minutes on my CAS servers i am getting the error MSExchange Availability 4010.
Process Microsoft.Exchange.InfoWorker.Common.Delayed`1[System.String]: Request from S-1-5-21-562707881-1060713641-168829947-11538 failed security checks.
I have adjusted the registry setting HKLM\System\CurrentControlSet\services\MSExchange Availability\Diagnostics from 0 to 5 on the CAS servers. I don't have an Availability Service under Services.
The errors keep occurring.

http://forums.msexchange.org/m_1800549466/printable.htm
Refer This Link
DushYant'

I have had Itunes installed on my laptop for many years. I t started malfunctioning so I uninstalled it. I tried to reinstall and there is persistent error in installing . What is the problem ? How can I solve this?

"It started malfunctioning so I uninstalled it".
That may have been necessary, may not have.
"I tried to reinstall and there is persistent error in installing. What is the problem?"
No clue.. you've not provided us any details.
"How can I solve this?"
Search these forums or google for the error occurring or post the error so that others can help you.

My iPod is to desactiver and I do not arrive has to restore him(it) has cause of a persistent error ( 3194 ), somebody can use PLEASE??

My iPod is to desactiver and I do not arrive has to restore him(it) has cause of a persistent error ( 3194 ), somebody can use PLEASE??

From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
B-rock

Why can't I update to the latest itunes version? My computer says an error occured and that if the problem persists to load manually

Why can't I update to the latest version of itunes. My computer tells me an error occured and if it happens again to load manually

Had exactly same problem on iPad1. "Unable to check for update. An error occurred while checking for a software update". Been getting this since 3/7/2012. Apple support said probably server overload. Checked these comments and found answer that worked.
-- Reset device
    . Backup your iPhone/iPad to iCloud (very important). Settings>iCloud> Storage and Backup>Backup Now (at the bottom)
    . Erase your device. Settings>General>Reset>Erase All Content And Settings
    . Device will reset and wipe itself
    . When it restarts follow the instructions on screen and setup your device.
        You're choices here do not really matter except for restoring From a backup.
        Do not restore a backup, chose "Set up as new".
    . When complete, the Software Update should now work which will install IOS 5.1
    . When installed, Erase the device again (see Above).
    . Once erased, follow the Wizard but this time select that you wish to restore from a backup
        In iCloud. Select the backup that you took in first step.
     . Your device should be back to normal and with IOS 5.1.
This takes time to complete but it worked. Thanks to Glosdeveloper for this. By the way this was an "over the air" update (as opposed to plugged in.

Unable to install update 3.2.1 and persisting errors in version 3.2

Hi All,
As many Aperture users I face issues with the Crop-tool in Aperture version 3.2
Accordingly, I was delight to see that Apple quickly released the 3.2.1 update to resolve these issues but ….
When downloading the update via the Update Software feature on my MacBook Air (Late 2010), I obtained a message that the an error occurred and the package could not be installed due to missing info. I was advised to perform another attempt next time I run the automated Software Update. After 8 attempts, I still have the same result.
Accordingly I downloaded the software package directly from the Apple support website (http://support.apple.com/kb/DL1463) but when trying to install the dmg-file, I obtained an new error indicating “invalid checksum”.
Does anybody (with or without a MacBook Air) has experience with this?
Is there another website where I would be able to get a valid version of the Aperture 3.2.1 update?
Any other steps that I might consider to solve the issue?
Thanks for your feedback in advance,
Meubi

Hi Frank,
Just to let you know the rest of my queste to get Aperture 3.2.1 running on my MacBook Air !!!
1. First installed a virus/malware scanner via the Mac App Store but that didn't detect anything (Lukely, is a Mac after all isn't it ;-) but ... also still not possible to install Aperture 3.2.1
2. Downloaded another dmg file (from some small freeware tool) to check whether there were corrupted parts in the installer feature in the OS. So, I was able to install another dmg ... but still no Aperture 3.2.1
3. Verify and/or Repair Hard Drive with Disk Utility didn't do much either
4. Downloaded the same Aperture 3.2.1 dmg on my (wife's) iMac and there I was able to install version 3.2.1 without any trouble.
... after some frustrating weekend ...
5. I copied the mounted Aperture 3.2.1 drive to an USB stick and run the installation from that USB stick on my MacBook Air .....and .... TADAAAA !!! ... Aperture 3.2.1 is now also running on my MBA
Don't ask me why it worked this time but it did!
Thanks for sharing your knowledge and tips, it was really appreciated!
Take care,
Meubi

HT204406 I am trying to get my computer on iTunes Match and I keep getting the message "unknown error (4001)

I am trying to get my computer on iTunes Match but I keep getting the message "unknown error (4001)? Have no clue..........help!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
-Griff W.

I have been working on a file in pages which I cannot open now. Every time I select it "an error occurred and pages must close" appears. Files sharing in itunes doesn't work either. Any suggestions?? THANK YOU

I have been working on a file in pages which I cannot open now. Every time I select it "an error occurred and pages must close" appears and pages shuts down. I have tried to duplicate the document but cannot open the copy either. I am unable to email, share via iwork, itunes, idisk or WebDAV all of these options just close pages down. Does anyone have any ideas......Thank you

And you are quite persistent, Menu Boy, in offering pernickety and pointless prattle, in response to a "support page" on iPad's buggy Pages App.
Let's summarise, for those reviewing this threadless thread for app support..
Mobile pages works reliably for simple docs, especially creating letters and Menus for Microsoft's Kindy canteen (even on special days with nice big pictures).
When importing more complex docs and/or working with larger creations, it is prone to randomly corrupting files upon re-opening, along similar lines as Word (running on a PC).
So, Menu Boy, do they let you sneak into classes every now and then? What is the secret to their training? "Say after me, if any I.T. product works just some of the time, that's a job well done, and if something randomly stops working, we call that the user's fault... And if they complain, we call them names."

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy

I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to do?

I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to do?

I am getting the same error message - error 7, Windows error 193 running iTunes on a PC Laptop (HP) which has been running iTunes previously for at least 2 years.
I followed the Apple support page and uninstalled (in order) all Apple programmes specified, rebooted, then re-installed. Two additional errors crop up in re-installation, the first one is to do with Apple Mobile Support Device Services. It seems that this might be rectified by plugging in said devices before finishing the re-install. The second reads iTunesHelper was not installed correctly please re-install iTunes. This persists. I cannot uninstall iTunesHelper using the Control Panel, but I can delete it using Windows. However, after re-installing again, it still won't run and the original error comes back. I've downloaded and uninstalled 15 times now and this is taking far too long to be acceptable.

Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!!

Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!

This writeup comes from the article referenced below it:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

Messages from PI are successful , but not shown in AIF error handling and monditoring

Dear All,
We have messages being triggered from PI to proxy and to AIF.
Messages status is shown as successful in sxmb_moni transaction but I don't get to see these in /AIF/err - error handling and monitoring transaction.
WHat could be the possible reason? would there be any missing authorization.
Note: this is working in Development but having this issue in test environment.
Thanks and Regards,
Archana

Hi Archana,
About ERR_WEB, probably run an old version, but this won't help you either, I think.
Another tip is to look in PI:
Is your service synchronous? For synchronous messages PI only persists the message in PI's message store if the abap proxy returns an error, such as a SOAP Fault. If your abap proxy is not returning an error, then make sure it does. You can raise an application error in AIF.
If PI already receives a SOAP fault, then I suggest you to check if the message was stored in PI: see SAP note 872388 to guide you on this task.

Persistant Errors 4001 and 4010

Similar Messages

Maybe you are looking for