Personalization: Newly Created Item to be Validated

Hi,
How can I include a validation to a new item in OAF personalization?
My requirement is to enable this new item only when TYPE = 'Yes' and disable when TYPE <> 'Yes'. This TYPE field varies for different records.
Thanks!
N
Edited by: user8427607 on 12/08/2009 00:20

Hi,
Is this a Standard page OR a custom one???
If it's a standard one then you have to extend the controller. Validation part can't be done by Personalization.
Thanks
--Anil

Similar Messages

Newly created item through personalization not visible

Hi All,
I have added on new item , in a page,
Howerver when I clicked apply on that item , once I define the required properties of the item.
I am getting this error
"Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM"."
I am not able to locate that item , anywhere * either in personalzied page nor in application page

I have gone to personalize page -> selected LOVRN -> create item ->
level - Site
Item Type - MessageLOVInput
Prompt - some custom prompt
Id - some custom id
External LOV- given exisitng seeded path for LOV with region name in the last
apply .
Then the error appeared as
Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM". appeared
After the above steps complete. I have again gone to personalization ->complete view . But I am not able to locate the item created in above mentioned steps.
One thing to note, I have tried creating new item , however everytime I am getting the above error after clicking on apply. In one occasion I have given incomplete path in the external LOV field mentioned above.(i.e. I forgot to mention the region Name )
Please help....

Personalizations with Create Item and Item Style "Pop Up"?

Can anyone provide me an example of how to create a simple pop up message? I would attempt to create this with Oracle Personalizations -> Create Item -> Item Style "Pop Up".
I attempted to create the pop up message but am not successful.
Any guidenace would be greatly appreciated.
Thanks!

Hi Timo,
My question is related to personalizations in Oracle Self Service pages, Currently I am on Oracle APPS R.12.1.3.
The Self Service pages are associated to a VIEW OBJECT that is either copied from Oracle seeded VOs or created and/or modified in JAVA.
You can also perform a "Personalization" within the form and by pass making updates in JAVA. This option is available in any self-service screen, top right corner labeled "Personalize Page". Once you select "Personalize Page, there is a option called "Create Item" that will allow you to create a new column or custom action.
My request is simply to understand how to utilize the seeded "Create Item" and within this function "Pop Up" in order for a page or message to appear immediately after for example the user select a button or enters data into a field.
Not sure if I can perform this within a "Personlization" or is updating the underlining View Object or Controller class is required.
Thank you and I appreciate any guidance you can provide.
Robert

Newly Created items not seen when creating a quote

Hi,
I created a new item and now I am trying to add this item in the my new quote. I cannot find the item. Is there any concurrent program or any setup I need to do so that it reflects in the quotes. Please help as I am new to this and not aware of the functional setups for this.
Thanks in advance.
Regards,
Bm

Hi,
Please review the following document:
Cannot find items to add to a Quote (Doc ID 340933.1)
Excerpt from this document:
1. Determine where the application is searching for the item by checking the value for the profile 'ASO: Enable Intermedia Search'
     If set to Yes - both the interMedia Search and Inventory tables are searched
     If set to No - only the Inventory table is searched
     Note: In R12, the HTML UI will always use the interMedia search.
2. Verify the inventory item meets the following criteria:
A) The current date must be within the start and end date range set for the product
B) The product must be valid for the inventory organization of the operating unit in which the quote is created.
C) The product must be in the default category set defined for/in the functional area "Order Management."
Inventory Organization is determined as follows:
- Quoting UI first reads the value of profile ASO: Category Set.
- If this profile is not set, it reads from OM functional area.
    (Navigation -> OM > Setup > Items > Categories > Default Category Sets)
using the OM responsibility which points to the same OU as the Quoting responsibility.
D) The product must have the "Customer Orders Enabled" flag enabled..
E) The BOM Item Type must be Model or Standard.
F) The Primary UOM is not ENR.
3. If the interMedia search is enabled, make sure the iStore Search Insert concurrent program was run to populate the interMedia search table.
See Note 261454.1 - 'How to reduce the number of records inserted by iStore Search Insert?' for information on the profiles that determine which items are inserted into this table by the program.
See Note 1263758.1 - How To Locate which Responsibility the iStore Search Insert Concurrent Program can be run from?
Note: Only interMedia Search is supported in R12 HTML Quoting. Hence, it is enabled by default.
Additional troubleshooting queries are in this document.
Regards,
Debbie

Can't create item extending controller

Hi everybody, I need your help.
I need to put a checkbox validation in OIE Details Page > Expense Details. I tried to do it using Personalization, but Create Item icon is disabled. So I'm trying to do it extending the controller but I'm stuck in this point.
I'm woriking on R11i. I think I have to extend "DetailDataInputCO". I used this code but the item doesn't appear.
public class xxDetailDataInputCO extends DetailDataInputCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAMessageCheckBoxBean ccidbean = (OAMessageCheckBoxBean)pageContext.getWebBeanFactory().createWebBean(pageContext, OAWebBeanConstants.MESSAGE_CHECKBOX_BEAN, null, "xxValidation");
ccidbean.setID("xxValidation");
ccidbean.setUINodeName("xxValidation");
ccidbean.setText("I confirm that all aspects of my time entries are accurate.");
ccidbean.setPrompt("Test");
Please, tell me what I'm doing wrong.
Thanks in advance.

Hi,
I checked the Region, even I didnt see the "Create Item" image (not only enabled, the image itself not there).
So you want to add a checkbox under "Flow Layout: Expense Details".(flowLayout id="DetailFields" )
<your code start>
OAHeaderBean hb = (OAHeaderBean)webBean.findChildRecursive("XXXID");
//Second Create a bean to that
//add Index to the Header Region
hb.addIndexedChild(ccidbean);
<your code ends>
Instead of add the item to yoru custom Header Bean,
Can you get the handle of the flowlayout with the id "DetailFields" and then add to that (There is a way to add it in a particular position also).
import oracle.apps.fnd.framework.webui.beans.layout.OAFlowLayoutBean;
OAFlowLayoutBean detailsFlowLayout = (OAFlowLayoutBean) webBean.findChildRecursive("DetailFields");
if(detailsFlowLayout !=null)
detailsFlowLayout.addIndexedChild(ccidbean);
// You can use addIndexedChild(int childIndex, UINode child) to add it in a particular index.
Thanks,
With regards,
Kali.
OSSI.

Using a newly created Library document to create a list item and attach itself

I have a workflow that moves a document from one library to another.
When a document is moved to a certain library I want to create a list item with a link to the document in the list item. Keep in mind there could be 10 files submitted to the library, so then in my list I would want 10 new list items created for
each file, with a link to the individual file. or is there a way to attach the document to a newly created list item programmatically?
is this possible?

Hi,
According to your post, my understanding is that you wanted to use a newly created Library document to create a list item and attach itself.
I recommend to create a workflow assocaited to the second library, and start the workflow automatically when an item is created.
Then add action as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Create Item button on personalization page.

Hi,
I have Personailze Self Service Defn profile option enabled at site level. (User also set to YES).
However I don't see create item button on many pages personalization screen, (like HomePage, or some other page).
And on functional administrator responsibility's any page (like profile page in core, create Item is there).
Its been checked on other instances that the create item button appears there for the same pages in problem.
What can be the reason?
Abdul Wahid

Hi,
Talked to Anil enabled "FND: Personalization Seeding Mode / FND_PERSONALIZATION_SEEDING_MODE" personalization link. It worked (even though the documentation says that its only for oracle's internal usage).
Also related diagnostic story got via other cooleague with deeper cause of the problem and solution.
Need to set system profiles to change old personalizations - expected?
Abdul Wahid

Create Item button not enabled in Personalization page

Hi All,
In one of the OA pages, I clicked "Personalize Page" icon and went to the personalization page. The following columns are not present in that page:
Create Item
Update Item
Delete Item
So I m not able to create any new items through personalization.
Let me know if someone has idea abt this.
Regards,
Pradeep

Hey Gyan,
Thanks.. After changing the profile option I m able to see the create item and update item icons in the personalization page.
Could you also please tell the impact of changing the profile?
Thanks,
Pradeep

Not able to fine Create Item column in the Page personalization

Dear All,
I am not able to find the "Create Item" column in OA page personalization. Do we need to set any profile options for this?
Regards,
Joshna.

Hope you have set these profile option.
Personalize Self-Service Defn should also to Yes
Disable Self-service Personal to No
FND%Diagon% to yes
Once you are going for personlization, you would be getting personlize Page link.
Click personlize page link
Select Scope
select complete Radio Button
select Create Item Icon for a region(table)
Thanks

Create Item column is not appearing in the "Personalize Page"

Hi All,
I am working in R12 upgrade project.
I have to create item(Link) in a table region as per the requirement.
But that "Create Item" button rather the column is not appearing in that "Personalize Page" when I click on the Personalize Page link of the concerned page.
Can anyone please suggest Do I have to do any setup or any profile option needs to be enabled.
Thanks,
Raja Dutta

Hi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant

Item & page level validation

1. How do I check/see if a validation rule is page level or item level, I couldn't find any difference in the definitions between the two as seen on the definition screens in APEX.
2. (Could be related to 1.) I expected the validation rule 'Item in Expression1 contains at least one of the characters in Expression2' to imply that Expression1 can not be NULL. I had to create a separate IS NOT NULL validation rule however. To me that does not make sense or is there a reasonable explanation?
tia,
Martin

Martin,
As Tony said, there is no difference between page and item validations other than the ability for item validations to have error messages positioned right next to their label.
As for the null value problem, the following "item comparison" -type validations do not produce a validation error if the specified item is null:
* Item specified contains no spaces
* Item specified is a valid date
* Item in Expression 1 contains only characters in Expression 2
* Item in Expression 1 contains at least one of the characters in Expression 2
* Item in Expression 1 does not contain any of the characters in Expression 2
This allows you to account for the null value case with a separate "not null" validation. Without this behavior there would have to be a "Item in Expression 1 is NULL OR <remainder of validation>" -type validation in addition to each of the above validation types.
However, the following validation types do result in a validation failure if the item is null:
* Item in Expression 1 equals string literal in Expression 2
* Item in Expression 1 is contained in Expression 2
This behavior appears to be an oversight, also spelled bug.
Scott

Oracle.jbo.NoDefException: JBO-25058 during Personalization of Flex Item

Hi,
Service Request # 7082522.993
Customer : Hitatchi Data Systems
Release : 12.0.5
Machine Name:http://crm-au-r12.au.oracle.com:8000
Login Name: operations / welcome
Responsibility : Manager, Self-Service
Click on "My Employee Information" hyperlink.
In the "My Employee Information" screen, click on "Personalize "Manager Views"
hyperlink.
In the Personalization Region, Navigate to: Stack Layout: Performance
Corresponding to: H Grid: Supervisor Hierar... Click on " Cretae Item" icon.
In the Create Item page, Enter the following:
Level : Site
Item Style : Flex
ID : ReviewingMangaerFlex
Admin Personalization : True
Appl Short Name : PER
CSS Class : OraDataText
Display Context Field : False
Name : PER_PERFORMANCE_REVIEWS
Prompt : Reviewing Manager
Read Only : True
Rendered : True
Segment List : Global Data Elements|Reviewing Manager
Type:Descriptive
User Personalization : true
Click on "Apply" button
In the Personalization Region, click on "Reorder Icon".
Keep Cursor on the Item : "Reviewing Manager" and click on the "Upward Arrow"
and move it before the Item : Related Event.
Click on "Save" and then "Return to Application" button.
The System throws following Error Message:
Error
The flexfield listener failed while getting the value for segment Reviewing
Manager from column ATTRIBUTE1 of the descriptive flexfield with application
short name PER and name PER_PERFORMANCE_REVIEWS. Please contact your system
administrator. The exception error message was: oracle.jbo.NoDefException: JBO-
25058: Definition Attribute1 of type Attribute not found in PerfSupRootVO.
This issue could be reproduced in the Internal Instance with the Same Error
Message as specified by the Customer.
This issue was posted through RFA: 1453409 also.
Thanks,
Viswanathan

Hi,
The suggested solution has not resolved the issue. The suggested setup was made and then cleared cache, bounced apache, retested the issue.
But the issue has not got resolved.
Thanks,
Viswanathan

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

Not inserting records in a newly created table

Hi everybody,
I have imported four tables in a source module and used the Join Operator in order to insert the rows in one newly created table.
This table - designed in a target module - was created in the desired schema , but without the relevant rows , as I expected...
NOTE : the where clause , i have defined in the Join Operator, is not the problem , as I removed it and the rows are not inserted...in the table
Also , the sample PL/SQL code which was created automatically , was exactly as I expected - I mean the 'insert into ... select.....' clause was right...
What may be the problem..?
Thanks , a lot
Simon

Hi Jaap,
thanks for your reply...
Sorry for being a little unclear ...
I have followed the instrunctions in the on-line help of OWB , and :
1) have imported four code tables into a source module . The tables are in an Oracle RDBMS 10g .
2)I have created manually a table - using the OWB client tool - which consisted of some of the columns found in the four tables .
3)I have inserted a Join Operator in order to correlate the four table columns with the columns of the target module.
4)I have defined the Join condition of the the four table columns. In my first post , unintenionally I have written that I removed the Join Operator. I meant the Join Condition in order to make sure that the join condition isn't the reason that the records are not inserted....
5)I have validated and generated the mapping without any errors - not even warnings.
6)I have selected Project->Deployment Manager and I selected the OWB_RUN user - which is the Runtime Repository owner.
7)I have selected the objects to deploy - the mapping , the one table I created in the target module. The deployment has succedded , and the table was created but no records are found in it.
Now , is there a possibility that this problem is caused by absence of the privileges to insert the rows...?
How can I check that the source tables are filled on the registered location of your source module?
Another basic question...
I have created a Runtime Repository owner - called owb_run- using the Runtime Repository Assistant . I use this user in order to deploy the mapping and the new table. I want -and it is created- that table in another schema (user his_dw) - even another database in the same server. Should I run the Runtime Repository owner in this schema (his_dw)???
Thanks , again a lot
Simon

How to cause a form to reload with a newly created record?

I hope this is easy and I'm just missing it.
I have a form based on a table (a "parent" table.). The parent table uses a trigger to generate the PK.
When a new parent record is created with the form, I want the page to reload with the newly created record still in the form. Then some conditional regions based upon child-tables would appear, with options to populate the detail records.
My problem is simple: how can I access the value of the primary key of the newly created record once it is submitted to the database, so I can use it to reload that record into the form?
Thanks very much for your help!

John - The DML process (Automatic Row Processing) has a Return Key Into Item option. That's what you need.
Scott

Personalization: Newly Created Item to be Validated

Similar Messages

Maybe you are looking for