Personalizing Security message in NAS server

Hi, my questions:
Can we change the security message text in NAS server? the file name showing the message is "cca_block".
This message appears when a wireless client tries to access a not permited ip address or network.
The message text is "Security message - Access Blocked"
"You don't have access to this URL from your current location. If you fell that you have received this message in error, please contact your network administrator."
many thanks
marcello sozzo

You can't change the security message text in NAS server By default it as it is.

Similar Messages

  • I can no longer access facebook from my macair and when i try the following error message appears "unable to establish a secure connection to the server.

    I have had no issue accessing Facebook in the past using my MacAir.  Last night each time I would try and access the page, an error message would appear, saying that unable to establish a secure connection to the server "www.facebook.com"".  The problem continues this morning.  I have not updated any software or made any changes.  One minute it was working, the next it was not.  I do not have any parental controls; I have deleted the cookies; and I have reset safari.  I can access all other websites that I have tried.  I am using Version 6.0.4.

    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    Then delete the cache.
    Now open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If nothing above helped, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, restart your internet modem and router.  Then quit and relaunch Safari and try Facebook.

  • Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

    Safari keeps giving  and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
    It only seams to have a problem with https sites.
    Any help would be appreciated

    The "s" in "https" indicates the site is a secure server--usually a site that will require a password.  Connections to secure servers can be blocked by parental controls.  Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)?  If so, check the settings to make sure they will allow the connection.

  • SSO to ITS through WebSEAL gives secure/non-secure messages

    Hi
    We running the following setup:
    EP6 SP14
    Stand-alone ITS 6.20 patch 18
    4.7 R/3 Enterprise
    TAM/WebSEAL 5.1
    We are running SSO through WebSEAL to the portal and everything seems to be working just fine.
    But when we try to access a transactional iView or an IAC iView running on the ITS server I get a pop-up message saying "This page contains both secure and nonsecure items."
    We are accessing WebSEAL through HTTPS, we are running HTTPS between WebSEAL and the portal and HTTP between WebSEAL and ITS.
    I have tried to access the ITS through WebSEAL without using the portal, and I still get the message. So it must be something between the WebSEAL and the ITS server.
    Does anybody have any ideas what is causing this?
    Cheers,
    Jacob Vennervald

    The "secure and non-secure" message, displayed when accessing ITS through WebSEAL when using IE and HTTPS, is caused by an empty source reference (<IFRAME ... SRC="" ...>) within the ITS menu page (...d_menu.html).
    The integration guide, available on the <a href="http://www-1.ibm.com/support/docview.wss?uid=swg24003605">IBM website</a> and the <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/ibm">SAP SDN</a>, contains the information on how to stop the message from appearing.
    The message should not be displayed when accessing ITS through WebSEAL using HTTP.
    Regards,
    Peter Tuton.

  • How do I fix duplicates on a NAS server for itunes?

    I have a dlink NAS server that I'd like to use as a network itunes server.  Problem is that it seems to create multiple duplicates of just about everything I have.  As a result I'll have 3 - 4 of everything. 
    Question - is there a way, or an application that anyone is aware of, that will let me to search for and delete duplicates on the NAS server?
    Thanks!

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • How to use security roles in Weblogic server?

    Hello Gurus,
    I am new to Weblogic server and I am trying to investigate how to make
    use of security roles in weblogic server (5.1.0). Can anyone point me
    to some documentation. Specifically, I am looking for instance level,
    and method level security and how to use it.
    Thanks for taking your time to read this e-mail.
    Thank You all in advance,
    Hari.

    You should read the security information in the Servlet 2.2 specification
    that WL 5.1 implements:
    http://java.sun.com/products/servlet/download.html
    Chapter 11 deals with declarative and programmatic security, and includes a
    section on roles:
    11.4 Roles
    A role is an abstract logical grouping of users that is defined by the
    Application Developer or
    Assembler. When the application is deployed, these roles are mapped by a
    Deployer to security
    identities, such as principals or groups, in the runtime environment.
    A servlet container enforces declarative or programmatic security for the
    principal associated with
    an incoming request based on the security attributes of that calling
    principal. For example,
    1. When a deployer has mapped a security role to a user group in the
    operational environment. The
    user group to which the calling principal belongs is retrieved from its
    security attributes. If the
    principal's user group matches the user group in the operational environment
    that the security
    role has been mapped to, the principal is in the security role.
    2. When a deployer has mapped a security role to a principal name in a
    security policy domain, the
    principal name of the calling principal is retrieved from its security
    attributes. If the principal is
    the same as the principal to which the security role was mapped, the calling
    principal is in the
    security role.
    Cameron Purdy
    http://www.tangosol.com
    "Hari" <[email protected]> wrote in message
    news:[email protected]..
    Hello Gurus,
    I am new to Weblogic server and I am trying to investigate how to make
    use of security roles in weblogic server (5.1.0). Can anyone point me
    to some documentation. Specifically, I am looking for instance level,
    and method level security and how to use it.
    Thanks for taking your time to read this e-mail.
    Thank You all in advance,
    Hari.

  • Error: The listener returned the following Message: 500 Internal Server Error

    Hi,
    I'm currently having trouble building a JSP Portlet and registering it in Portal 902. I've followed all of the documentation and created the appropriate web.xml, provider.xml and _default.properties files as required.  When I deploy the page to my local OC4J server using http://localhost:port/myapplication/providers I receive the following message:
    Congratulations! You have successfully reached your Provider's Test Page.
    Checking for components:
    Portlets are: MyPortlet
    When I then try and deploy the portlet in our development portal environment using the Enterprise Manager interface, and then test using the same URL as above, I receive the same message as above.
    However, when I then try and register the provider through the Portal environment and try and "show" the portlet through a page within the portal, I receive the following error message:
    Error: The listener returned the following Message: 500 Internal Server Error
    I'm not sure why it would work with my local OC4J instance, and on the Portal server itself, but not as a portlet within a portal page in the main environment. I will add the application log, the provider.xml and the _default.properties files to extra postings after this first message.
    Any help would be much, much appreciated.
    Best Regards

    Here is the application log file after running the portlet:
    12/11/02 3:53 PM Started
    12/11/02 3:53 PM Started
    12/11/02 3:53 PM Started
    12/11/02 3:55 PM FavouritesPortlet: oracle.jsp.runtimev2.JspServlet: init
    12/11/02 3:55 PM FavouritesPortlet: 9.0.2.0.0 Started
    12/11/02 3:55 PM FavouritesPortlet: oracle.webdb.provider.v2.adapter.SOAPServlet: init
    12/11/02 3:55 PM FavouritesPortlet: NumberFormatException while initializing Logger. Defaulting LogLevel to 4
    12/11/02 3:55 PM FavouritesPortlet: ServletLogger - Logging level: 4
    12/11/02 3:55 PM FavouritesPortlet: [id=(null), instance=6872125_3_PREVIEW] CONFIGURATION: Invalid or null value for property - executionWarningTimeout = null - setting to default value of 20 seconds
    12/11/02 3:55 PM FavouritesPortlet: [id=(null), instance=6872125_3_PREVIEW] CONFIGURATION: Invalid or null value for property - executionKillTimeout = null - setting to default value of 80 seconds
    12/11/02 3:55 PM FavouritesPortlet: [id=(null), instance=6872125_3_PREVIEW] CONFIGURATION: Default container renderer not specified
    12/11/02 3:55 PM FavouritesPortlet: [id=(null), instance=6872125_3_PREVIEW] CONFIGURATION: defaulting container renderer to DefaultContainerRenderer
    12/11/02 3:55 PM FavouritesPortlet: Servlet error
    java.lang.NullPointerException
         at jsp.FavouritesPortlet._jspService(_FavouritesPortlet.java:86)
         at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:508)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:255)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
         at oracle.portal.provider.v2.render.http.ResourceRenderer.renderBody(Unknown Source)
         at oracle.portal.provider.v2.render.RenderManager.render(Unknown Source)
         at oracle.portal.provider.v2.DefaultPortletInstance.render(Unknown Source)
         at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showPortlet(Unknown Source)
         at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.handleHttp(Unknown Source)
         at java.lang.reflect.Method.invoke(Native Method)
         at oracle.webdb.provider.v2.adapter.SOAPServlet.doHTTPCall(Unknown Source)
         at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)

  • QM Digital Signature SAP System's Personal Security Environments (PSEs)

    Hi All,
    We want to introduce the Digital Signatures for Quality Management Result Recording and Usage Decision. (Transaction Codes :QE01,QE02,QA11,QA12).
    We have made some studies.Still we need some suggessions to achieve the final goal.
    ==============================================================
    1.
    SSF settings for system signature
    Check and if necessary maintain the standard settings. To do this, execute the following activities in the IMG under SAP Web Application Server -> System Administration -> Digital Signature:
    • Define application-dependent parameters for SSF functions
    • Define security settings for the system
    The above IMG Structure
    SAP Web Application Server -> System Administration -> Digital Signature:
    Is not appearing in ECC6.0. Where we can find the above structure in ECC6.0?
    2. SAP Netweaver
    --> Application Server
    --> System Administration
    -> Maintain the Public Key information for the system
    --> Maintaining the system security information.
    This IMG Actvity "Maintaining the System Security information"
    Environment.
    We have to create new “SAP System's Personal Security Environments (PSEs)” ?
    What is the procedure to create SAP System's Personal Security Environments (PSEs) ?
    We are unable to proceed.
    Plz. help.
    With Best Regards,
    Raghu Sharma.

    Dear All,
    Basis involment is very much required.
    Hence we are closing this issue.
    With Best Regards,
    Raghu Sharma

  • Safari can't establish a secure connection to the server

    Hello,
    I am wondering if someone can kindly help me solve the following problem?  I have been trying to troubleshoot myself, but it seems that the problem persists.
    Issue
    I am having problems asscessing a wireless web login.  The University that I attend allows students to access the wireless web by entering their login and password.  When a new browser session is started, it automatically directs to the wiresless web log in.  Initially, I had no problems and could easily access log into the site.  Recently, I have had a issue where I try to log in and I get one of two error messages:
    Safari can't open page "xxxxxx" because Safari can't estabish a secure connection to the server "xxxx"
    Your login was processed successfully but a DNS Timeout occured.  You will need to close and restart your browser in order to reach your orginal desitnation.
    Notes:
    Issue #1 happens the most often. 
    When issue #2 happens, I close my browser and open a new one but the page remains blank. 
    The wi-fi shows full strength and all others in the room have the ability to log on/off with no problems.
    I have no problems with other secure sites when accessing from home wireless connection.
    Troubleshooting
    I have tried several things:
    Date and Time - correct
    Parental Controls - none are set
    Keychain First Aid - no errors
    Another User Account - I have tried using a different user account and the problem continues
    Used another browser - I have tried using Firefix, same problem
    Open DNS - I have added DNS servers 208.67.222.222 and 208.67.220.220 but the problem continues
    Safari Clean Up - I have emptied cache, cleared history, reset safari, same problem
    I have tried to research the issue and troubleshoot as best as I can but nothing seems to work.  I am somewhat new to Mac's but am pretty savy but need a bit of guidence to figure this one out as I am not sure exactly what I need to do and don't want to mess up any settings any further and compound the issue.  It is quite frustrating as I am unable to access the internet and class website during class.
    I should mention that at one point I had a scan/clean app installed.  Before this app was installed it seems to work, however, I can't directly link the timing.  I can't remember exactly which program it was as I have since removed it. 
    Can someone help me identify the issue?  Is it a Certificate Authority or DNS issue?  I would love to get this solved...
    Thank you!

    mdkat, I have encountered this problem in the past, and doing the following helped:
    In the URL, simply lop off the "s" at the end of https:// and load the resulting URL.
    Before you quite understandably jump on me to say that this action will result in a non-secure connection, confirm for yourself that this will result in the web page being reloaded with the proper https:// protocol with the secure SSL/TLS layer as well as the feel-good lock icon.
    That is not to say this behaviour is correct. Obviously the warning you see is an indication Safari / Firefox and the site you're accessing are not communicating in some way, but fixing it is up to them.
    Use as you see fit, as I say it works for me.
    I should mention that at one point I had a scan/clean app installed.  Before this app was installed it seems to work, however, I can't directly link the timing.  I can't remember exactly which program it was as I have since removed it.
    Good idea. Probably not related though, since I have never installed such things.
    ... and thank you for writing such a thoughtful and well-organized question!

  • SEND ALL MESSAGES TO SYSLOG SERVER

    HI, I WANT SEE ALL INFORMATIONS THAT WHO CONNECT TO ROUTER OR SWITCH AND  WHICH COMMAND USE DURING CONNECTION, AT THE SYSLOG SERVER. FOR EXAMPLE :"SH RUN", "SH INT FA0/0", "ENABLE", "CONF T".....
    HOW CAN I DO THAT?
    THX

    HI,
    I used that config over my routers
    logging buffered 4096 informatinal
    logging trap 5
    archive--->for take config changes to syslog server
    log config
    logging enable
    logging size 200
    notify syslog
    hidekeys
    logging origin-id hostname
    logging 10.10.1.119
    logging 128.1.14.193
    logging source-interface FastEthernet0/0.10
    I see log messages on syslog server, but ı want see also failed authentications on syslog server,
    I think I have to use these conmmands
    login block-for 60 attempts 3 within 60
    login delay 1
    login on-failure log every 3
    login on-success log
    but these commands do not support on my routers, I use "c2800nm-adventerprisek9-mz.124-11.T4.bin"
    Which IOS does support these commands?
    THX
    Gürcan Başural
    Assistant Manager
    IT Systems and Network Management Department
    IT and Operations Division
    T. +90 212 225 0500 - 1308 F. +90 212 225 0526
    @. [email protected] W. http://www.atbank.com.tr
    Bu e-posta ve muhtemel eklerinde verilen bilgiler kişiye özel ve gizli olup, yalnızca mesajda belirlenen alıcı ile ilgilidir. Bu mesajda bulunan tüm fikir ve görüşler ve ekindeki dosyalar sadece adres sahip(ler)ine ait olup, Arap Türk Bankası A.Ş. hiçbir şekilde sorumlu tutulamaz. Şirketimiz mesajın ve bilgilerinin size değişikliğe uğrayarak veya geç ulaşmasından, bütünlüğünün ve gizliliğinin korunamamasından, virüs içermesinden ve bilgisayar sisteminize verebileceği herhangi bir zarardan sorumlu tutulamaz.
    This message and attachments are confidential and intended solely for the individual(s) stated in this message. This e-mail is not intended to impose nor shall it be construed as imposing any legally binding obligation upon Arap Türk Bankası A.Ş. and/or any of its subsidiaries or associated companies. Neither Arap Türk Bankası A.Ş. nor any of its subsidiaries or associated companies gives any representation or warranty as to the accuracy or completeness of the contents of this e-mail. Arap Türk Bankası A.Ş. shall not be held liable to any person resulting from the use of any information contained in this e-mail and shall not be liable to any person who acts or omits to do anything in reliance upon it.

  • How to secure Flash Media Streaming Server 3.5 (live stream connection)

    I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.
    All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?
    How can I setup the server to require a user and password to stream live media to the server?
    Any help would be great, I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.
    I am using the Adobe FMS Apache install, what files need changing?
    I have the following files:
    /opt/adobe/fms/applications/live
    total 44
    -rwxr-xr-x 1 fms fms 1035 Jul 27 14:52 allowedHTMLdomains.txt
    -rwxr-xr-x 1 fms fms  992 Jul 27 14:52 allowedSWFdomains.txt
    -rwxr-xr-x 1 fms fms 1550 Jul 27 14:52 Application.xml
    -rwxr-xr-x 1 fms fms 4371 Jul 27 14:52 main.far
    -rwxr-xr-x 1 fms fms 2292 Jul 27 14:52 readme.txt
    I want to lock down a person from connecting to the server on the public internet and starting a live stream?
    Can this be done with a user name and password?

    If you are concerned about anyone starting publishing to your stream then we have security update on this. Please upgrade to 3.5.4 and now you can use FMS Authentication Add-in (used with FMLE as publisher). If you are facing problems with publisher which are not FMLE, please enable SWF Verification so that only valid SWF's connect to your FMS.
    You can find 3.5.4 update here : http://www.adobe.com/support/flashmediaserver/downloads_updaters.html
    You can find FMS Authentication Add-in on FMLE Download page: https://www.adobe.com/cfusion/entitlement/index.cfm?e=fmle3 (when you click on Agree - it will prompt for your Adobe ID - then when you reach Download page - you will get Optional Download of Authentication Add-in)

  • Couldn't establish a secure connection to the server

    The following message is appearing every time I go to log into an account via a secure link.
    Safari can’t open the page because it couldn’t establish a secure connection to the server
    I am running Mac OS X 10.3.9
    I have Reset Safari 1.3.2
    Removed all cookies
    Emptied my Cache
    Contacted my ISP and isolated it is a software issue
    I used Internet Explorer and I was able to log into secure web pages. Therefore it is only Safari that doesn't allow me to log into secure pages.
    Do I need to reinstall my safari application using my Mac OS X Install Disc following the instructions listed in the manual under topic "Reinstalling the software That Came With Your Computer" heading "Installing Mac OS X and Applications"
    Buy reinstalling Mac OS X I hoping it might fix the issue with Safari. I am thinking it is a software/application issue.
    Is there anyway I can reinstall Safari without having to reinstall anything else and without making back up file from my hard drive.
    How do you go about reinstalling Safari only?

    Hi
    this is likely a keychain or settings issue rather than Safari....
    but here is Safari from the 10.3.9 combo update.....
    You'll need to choose the 'free' option, then unzip the file & drag the Safari app to your applications folder; then repair permissions, then run the 1.3.1 updater, then the 1.3.2 updater. Phew !!
    maybe someone will upload the 1.3.2 version eh? I have tiger, so can't help directly

  • Cannot open page Safari cannot open the page because it could not establish a secure connection to the server

    Hello Apple Experts!!
    I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
    The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
    The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
    Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
    This is happening only on the OS 5 and on the OS 4 everything works just great!!
    I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
    Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
    Any help on the same will be much appreciated!!
    Regards
    Surendra

    I'm having a similar issue.  Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
    I checked the ciphers enabled by their page, and this was returned:
      High Strength Ciphers (>= 112-bit key)
        SSLv3
          EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1  
          DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1  
          RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5   
          RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1  
        TLSv1
          EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1  
          DHE-RSA-AES128-SHA         Kx=DH         Au=RSA     Enc=AES(128)     Mac=SHA1  
          DHE-RSA-AES256-SHA         Kx=DH         Au=RSA     Enc=AES(256)     Mac=SHA1  
          n/a                        Kx=DH         Au=RSA     Enc=Camellia(128)  Mac=SHA1  
          n/a                        Kx=DH         Au=RSA     Enc=Camellia(256)  Mac=SHA1  
          DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1  
          AES128-SHA                 Kx=RSA        Au=RSA     Enc=AES(128)     Mac=SHA1  
          AES256-SHA                 Kx=RSA        Au=RSA     Enc=AES(256)     Mac=SHA1  
          n/a                        Kx=RSA        Au=RSA     Enc=Camellia(128)  Mac=SHA1  
          n/a                        Kx=RSA        Au=RSA     Enc=Camellia(256)  Mac=SHA1  
          RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5   
          RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1  
    This appeared to be a more than sufficient cipher list, yet my iPad won't load any page.  I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
    Any ideas?

  • Can't establish a secure connection to the server

    Safari loads ok and I can browse the internet. However, when i try to log on to 'my ebay'(and some other sites) I get the following error message:
    Safari can’t open the page “https://signin.ebay.co.uk/ws/eBayISAPI.dll?SignIn&Using…SAPI.dll%3FMyeBay%26MyeB ay%3D%26guest%3D1&pageType=1883” because it couldn’t establish a secure connection to the server “signin.ebay.co.uk”.
    In the mean time I have downloaded Firefox and that is working really well.
    Can anyone help repair my Safari?

    I have the same issue although i kind of fixed it. I have two admin accounts and one of the account's safari did the same thing as yours, except, it was the startpage and everypage i tried to visit. I reseted safari, as in the erase all data safari in the toolbar, safari-Reset Safari... But safari still didn't work. I logged out and went to my other account and opened safari. Now it works fine on both accounts. This meant safari had to logout before actually working better. I have this a few times these days.

  • Safari 8.0.3 Can't establish a secure connection to the server

    I have a Macbook Air (early 2014) running OS X Yosemite 10.10.2
    Safari is version 8.0.3
    When accessing the websites "https://www.national-lottery.co.uk" and "https://portal.wmpfonline.com" I am given the below message:
    Safari can't open the page "https://www.national-lottery.co.uk" because Safari can't establish a secure connection to the server "www.national-lottery.co.uk".
    Initially when I bought my Macbook Air these sites worked perfectly. Also, when I clear website data it will work for a short period of time (roughly 2 minutes) but other times that makes no difference.  I have tried using FireFox but I still have an issue accessing these sites.  When in recovery mode both sites work perfectly fine without an issue.
    Is anyone able to help me with this issue?  I have been searching and searching for a week to find a solution to this problem.
    Thank you all in advance

    This could be a complicated problem to solve, as there are several possible causes for it.
    Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
    Step 1
    From the menu bar, select
               ▹ System Preferences... ▹ Date & Time
    Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
    Check the box marked 
              Set date and time automatically
    if it's not already checked, and select one of the Apple time servers from the menu next to it.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /System/Library/Keychains/SystemCACertificates.keychain
    Right-click or control-click the highlighted line and select
              Services ▹ Show Info
    from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
    Repeat with this line:
    /System/Library/Keychains/SystemRootCertificates.keychain
    If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
    Step 3
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
    In the Keychains list, there should be items named System and System Roots. If not, select
              File ▹ Add Keychain
    from the menu bar and add the following items:
    /Library/Keychains/System.keychain
    /System/Library/Keychains/SystemRootCertificates.keychain
    Open the View menu in the menu bar. If one of the items in the menu is
              Show Expired Certificates
    select it. Otherwise it will show
              Hide Expired Certificates
    which is what you want.
    From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
              Secure Sockets Layer (SSL)
    select
              no value specified
    Close the inspection window. You'll be prompted for your administrator password to update the settings.
    Now open the same inspection window again, and select
              When using this certificate: Use System Defaults
    Save the change in the same way as before.
    Revert all the certificates with non-default trust settings. Never again change any of those settings.
    Step 4
    Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
    Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
              Help ▹ Keychain Access Help
    from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
    Step 5
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL.
    Step 6
    Triple-click anywhere in the line of text below on this page to select it:
    /var/db/crls
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
    Restart the computer, empty the Trash, and test.
    Step 7
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in the same way you launched Keychain Access.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    fe80::1%lo0                    localhost
    If that's not what you see, post the contents of the window.

Maybe you are looking for

  • Can I exchange a new MPA 11" for another model in 14 days?

    I have bought a new MPA 11" 2 days ago, and I changed my mind because I think I need a more powerful laptop like the MBP 13" which are actually at the sam price. There is no IR port and I cannot use a remote control for a presentation, that was the t

  • Parked Invoice amount wrongly stated

    Hi, I have one problem here with the amount of parked invoice. When I check at tcode MIR4, the amount stated as 1079.05. But, when I click the related PO# and go to purchase order history tab,amount for parked invoice stated as 0 (zero). Kindly, plea

  • How can I download a webcal:\\ file?

    Facebook offers a link to download an ical file of friend's birthdays. It looks like this... webcal://www.facebook.com/ical/b.php?uid=12345678&key=98765432 When I click on the link Firefox says "Firefox doesn't know how to open this address, because

  • Alternate Lot Sizing for KMAT (configurable) materials

    Hi friends, We are using KMAT(configurable) materials. During MPS/MRP run, SAP plans KMAT production with Lot-to-Lot production(EX) by default! We have some capacity planning situations, due to which, we need the lot sizing options like u2018Fixed lo

  • Specified schema is not configured

    We applied the ODM 10.1.0.3 patch. I am using Oracle Data Miner. I enter the connection information in the initial screen and I am getting the following error "Specified schema is not configured for use with Oracle Data Mining". I would appreciate if