Peut on mettre une carte sim d un autre pays, puet on mettre une carte sim d un autre pays
peut on mettre carte sim belge dans un iphone acheter en france
Bonjour,
Il est possible de mesurer une position ou une vitesse à partir d'un codeur incrémental à partir de deux méthodes. Soit en utilisant la fonction entrée compteur>>compter les fronts ou bien en utilisant la fonction entrée compteur>>codeur angulaire sous LV 8.20. Tout dépend de votre matériel est des signaux générés par votre codeur.
Je voudrais tout d'abord savoir sous quelle forme sont vos signaux générés par votre codeur et quels sont les exemples que vous avez utilisés et qui ne fonctionnent pas avec votre matériel?
Merci.
Similar Messages
-
I recently inherited a restored iPhone 5 from my uncle and its needs a sim to be activated, could i use my friends sim just to activate my iPhone and then give the sim back once its activated without affecting his contract and later on get a sim for myself and a contract for me and it all be normal??? Thanks
The phone MUST have a SIM present in order for activation to complete. The process will not finish otherwise.
For the OP:
If the iPhone 5 is locked to a carrier, you must use a SIM from that same carrier. Otherwise I think you would be OK borrowing the SIM to activate the phone.
~Lyssa -
How can I do sim free my iphone 4 beacause my iphone is not sim free ?
how can I do sim free my iphone 4 beacause my iphone is not sim free ?
If you are asking how to remove the carrier lock, only the carrier it is locked to can remove that. Contact them.
-
my phone has locked after updating , what should i do now to unlock ? now i don't live in usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .
The phone was hacked to unlock it. It relocked when you updated. ONLY the carrier it is locked to can authorize unlocking it. If you are not/never were an AT&T customer and you do not have an original store receipt from either an AT&T or Apple store in the U.S. for a no commitment AT&T iPhone, they will NOT unlock it.
Buy a new phone. -
My I phone 3GS keeps saying no sim. How can I get it to recognize the SIM card?
My iPhone keeps saying No SIM. How can I get it to recognize the SIM card?
TRy removing the sim card wipe it clean then insert it again. Your sim card tray might be dusty. Another option is turning your airplane mode on and off.
btw, is your network signal strong in the area where you are currently? Ask ATT if there is any area outage -
i am not able to activate my Iphone- I have a SIM card but it keeps telling me there is no SIM card. My phone has been unlocked by Apple but keeps.
i got in Manhattan from AT&T-
This error came after I updated the software since Apple confirmed and I have spoken with them and they confirmed it is officially iunlocked since I have full filled their terms of the agreement.
This phone was working earlier since i had jail broken it.
I have been using it with jail break for about 2 years now -
had a text telling me my old iPhone 3GS has now been unlocked. Inserted Orange SIM (from daughter's working phone) and iTunes says no SIM installed. Help please
Kilted Tim is correct, did you plug it in to iTunes to complete the process? I assumed you would have done so, but I shouldn't have assumed.
-
Out of the blue my sim card is no longer recogniced and i got a "sim invalid" window. once i reboot the phone everything goes back to normal. What can i do to solve this trouble?
Replace the sim card
-
I have an iphone4 but the sim is not working on it, how to activate the sim
i have iphone4 but the sim is not working on it. i have a airtel sim and is not working on my iphone. so plz suggest me how to activate the iphone
Where is the iPhone from?
I think your iPhone is locked to an original carrier, you need to contact them about unlocking and if you qualify. -
i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?
i had 4 point something i dont know lol but i used to text anyways with my wifi on "textfree app" until i updated like a dummy i didnt know they would ask for the sim card and my day got ruined . all i wanted to know is if i put a sim card like if i buy a at&t card for 4$ on amazon if it would unlock it and i can use it again for i can play angry birds -_- but u kinda made my day better thanks
-
What is the sim network unlock pin for when you replace your old sim card?
Hi, so I've just put my new Dan and Phil sim card into my phone but its asking for a sim network unlock pin, what is it?? Thanks
Hi,
It means your phone is network locked to another carrier. To use this sim your phone needs to be on EE, unlocked or sim free.
If you want the code to unlock your phone you will need to contact the carrier which issued the phone but as with EE there maybe come conditions you need to comply with before this will be done and a fee to pay.
Hope this helps. -
I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan
You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
Updating to iOS 5 removed the hack and the unofficial unlock.
All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source. -
I have brought an iPhone 5 and did a sim swap with my orange contract (EE) since putting the sim in I can only use my 3G, iMessage and apple ID...can't send or receive calls or txt, what can I do?? I'm running on ios 6.1.3.
Contact the carrier and confirm the account is provisioned correctly.
-
After restoring iPhone 4, iTunes is telling me that my SIM card is not supported. It is the same SIM I have always used with this phone. What action can I take to convince phone that the SIM card is OK?
Hello again, update time.
Finally got to speak to a senior technical advisor at Apple today who was most confused until he back-tracked and double checked all the basics. He then realised that the actual serial number of my original phone (from the proof of purchase I sent him) was different to the one that they had recorded when they made the swap. I think he said it was out by one character and was actually showing as a mobile connected to AT&T (from the States). He said that the replacement phone was then set-up as per the serial number they had typoed into their system as locked to AT&T. The genius who did the swap at Apple Doncaster must have placed an unlock on it at the time in order for my 3 SIM to work at all. Therefore when I restored it, it returned to the settings of the incorrect original phone serial number!
So... Apple tech advisor said he can rectify the records and re-set the factory setting to an Australian iPhone on the 3 network within 12-24 hours. Fingers crossed all is good by tomorrow afternoon.
Thanks for your suggestions though, I had been trying everything to get it to work as I'm sure you know how hard they are to live without once you've got used to living with one!
Cheers, Tom. -
before i do updates for my iphone (to 5.0.1) i close my SIM card, i can not complete the update proccess becouse SIM is closed also i can not activate iPhone becouse the SIM must be opened. when i try to open it , the networks does not appear (no service).
Its a serious problem and many people are facing the same issue on both locked and factory unlocked phones.
I wonder when Apple will address to this issue. After all it is losing all its reputation!
See this thread, many users are encountering the same issue:
https://discussions.apple.com/thread/3425746?start=75&tstart=0
I believe its a software issue and could be solved asap Apple fixes it!
Maybe you are looking for
-
In R12.2.3 Task type LOV is blank
Hi, We are implementing R12.2.3 Service modules for our client. But after defining the task types using the Service Responsibility, the same are available under Task manager window. But none of the task type neither the seeded one are available under
-
How to get selected rows in a new screen in alv.
Hi everybody, I have a alv report in oops concept when i select a row all the details of that particular row should come in new screen. can anybody help me regarding this if possible with example. thanks in advance. regards, venu.
-
Hi, I have created BPEL process that continuously polling on View present on database at certain interval. here i am using logical delete operation while polling for new or changed records so that will update certrain field on table. but my view has
-
Need to deploy custom EAR/WAR on EBS OC4J
hi all I'm using the VIS12 EBS image from Fusion Factory. I need to deploy a custom EAR/WAR on it. I have no EBS expertise (I'm a tech guy, not an apps guy). How do I do this deployment? I tried using admin_client.jar to use RMI for deployment but co
-
How do I set-up my Airport Extreme 6th generation with AT&T U-verse ARRIS NVG589 router? Would this be a difficult task? Any help appreciated! Thanks