Pg_upgrade fails for "$libdir/postgis-2.0"
Hello
I was trying to update my system, when found that postgresql needs a little tweaking from 9.2 to 9.3. Following the instructions on the wiki, I ran pg_upgrade:
[26] root@xxxlinux : /home/ognyan $ su - postgres -c 'pg_upgrade -b /opt/pgsql-9.2/bin/ -B /usr/bin/ -d /var/lib/postgres/data-9.2 -D /var/lib/postgres/data'
Performing Consistency Checks
Checking cluster versions ok
Checking database user is a superuser ok
Checking for prepared transactions ok
Checking for reg* system OID user data types ok
Checking for contrib/isn with bigint-passing mismatch ok
Creating dump of global objects ok
Creating dump of database schemas
ok
Checking for presence of required libraries fatal
Your installation references loadable libraries that are missing from the
new installation. You can add these libraries to the new installation,
or remove the functions using them from the old installation. A list of
problem libraries is in the file:
loadable_libraries.txt
Failure, exiting
As mentioned on the wiki, postgis-2.0.so was missing:
[27] root@xxxlinux : /home/ognyan $ cat /var/lib/postgres/loadable_libraries.txt
Could not load library "$libdir/postgis-2.0"
ERROR: could not access file "$libdir/postgis-2.0": No such file or directory
I unpacked the postgis-2.0.so from the old package. In fact it is in postgis-2.0, not postgresql-9.2, as the wiki says. I copied the file to /opt/pgsql-9.2/lib, but there was no effect. I even created several links to see if I got the filename wrong:
[28] root@xxxlinux : /home/ognyan $ ll /opt/pgsql-9.2/lib/postgis*
lrwxrwxrwx 1 postgres postgres 14 Nov 8 01:17 /opt/pgsql-9.2/lib/postgis -> postgis-2.0.so
lrwxrwxrwx 1 postgres postgres 14 Nov 8 01:17 /opt/pgsql-9.2/lib/postgis-2.0 -> postgis-2.0.so
-rwxr-xr-x 1 postgres postgres 623K Nov 8 00:36 /opt/pgsql-9.2/lib/postgis-2.0.so
lrwxrwxrwx 1 postgres postgres 14 Nov 8 01:17 /opt/pgsql-9.2/lib/postgis.so -> postgis-2.0.so
I tried an strace:
su - postgres -c 'strace -o /tmp/strace.postgres.log pg_upgrade -b /opt/pgsql-9.2/bin/ -B /usr/bin/ -d /var/lib/postgres/data-9.2 -D /var/lib/postgres/data'
The strace.postgres.log did not show anything relevant to postgis-2.0 except logging that it failed.
Packages currently installed:
[48] root@xxxlinux : /home/ognyan $ pacman -Q postgresql postgresql-old-upgrade postgis
postgresql 9.3.1-3
postgresql-old-upgrade 9.2.5-1
postgis 2.1.0-2
Is there something I am still missing or overlooking, any cache needs refreshing? pg_upgrade keeps failing, even with the library in place.
Post in {forum:id=858}
Similar Messages
-
I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIAHi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome. -
Best Buy 100% Price Match Guarantee FAIL for Elite Plus member!!!
So during the Black Friday weekend I purchased a Dyson vacuum at a store. I understand that Best Buy does not match pricing DURING Black Friday weekend. So on 12/15 Amazon had the vacuum on sale for $26 less than what I paid. Again, this is not Black Friday weekend but the item was purchased over Black Friday weekend. So I called in for Best Buy to match the price. I spoke with someone who seemed like temp help. It did not sound like she was in a call center and she didn't know much and seemed to be IM'n with someone to get answers. After initially telling me they would not match the price because the item was purchased during Black Friday I explained that it was no longer Black Friday and Best Buy policy does not obsolve them from matching prices for the next 5-6 weeks (the return date is 1/15/2015) from all items purchased over Black Friday weekend. If so, no one would buy during Black Friday. She said she would submit the price match and I would get an email letting me know if it has been approved. I was patient and waited 2 weeks and nothing. I called back and was told that the price match department was swamped and to please be patient. So I waited till today to call back for the return date is in 2 days and still no price match email. I am now being told that Best Buy only matches their own pricing if not at the time of sale AND they only match the price that same day when they can confirm the price. (which makes sense) I'm also being told my price match was never sent to the correct department so it has been sitting in case # purgatory for the past month. Why is any of this my fault?! I spend over $3500 per year, year after year and I'm supposed to get 'Elite' service. I know more than the people I'm speaking with on the phone! I called in with a legit lower price, waited patiently for Best Buy to match, have now spoken with 3 different reps, been told something different each time about the price match policy (every time they were wrong) and now I'm being told because it wasn't matched when they could confirm the price they won't match the price?! What am I missing?!
Total Price Match FAIL for Elite Plus member!!! I can only image how people that aren't Elite are treated! :-)Dear iamkraz,
Thank you for bringing us your business this holiday and for your continued loyalty to us as a My Best Buy Elite Plus customer. I am sorry if your recent experience has left you disappointed after the service you received. I would be happy to help clarify this for you.
Per our Price Match Guarantee, “At the time of sale, we price match all local retail competitors (including their online prices) and we price match products shipped from and sold by these major online retailers: Amazon.com, Bhphotovideo.com, Crutchfield.com, Dell.com, HP.com, Newegg.com, and TigerDirect.com.” The only price match we would perform after the initial time of sale would be to a lower price in store or on BestBuy.com during your respective Return & Exchange period. You should have been provided with this as the reason for not receiving the price match when you were speaking with our support teams.
My apologies for any confusion this caused. I would like to get some more details from you about the conversations you had so I may properly document this here at the corporate level for coaching and training. Please check your private messages by clicking on the envelope in the upper right-hand corner while you are logged into the forums.
Regards,
JD|Social Media Specialist | Best Buy® Corporate
Private Message -
"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date: 3/12/2015
Time: 12:26:04 PM
User: NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯ -
Portmap translation creation failed for udp src inside dst inside
Hi!
I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
My asa is a main router with addres 192.168.1.1
UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
Firewall and NAT on UC500 is disable
UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
the log says
3
Sep 07 2013
00:21:49
DC
53
PBXCUE
32901
portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
I tried exempting uc500 subnets on ASA but that didn;t work.
Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
Please help! I am not familiar with CLI.
I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
I would be grateful for ideas.
Lukasz
global (inside) 1 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface https IIS https netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface www IIS www netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255 dns
static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255 dns
static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255 dns
static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255 dns
static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255 dns
static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x
route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicyHello Julio!
Thank you for your advice.
I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
Now I can see everything from all of my inside networks.
I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
I am only an enthusiast but my recent successes have given me apetite for more...
I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq 8080
access-list outside_access_in extended permit tcp any interface outside eq 23456
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
access-list outside_access_in extended permit tcp any interface outside eq 13000
access-list outside_access_in extended permit tcp any interface outside range 8001 8016
access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
access-list inside_access_in extended permit ip host IIS any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip host RBSTORE_NAS any
access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
access-list inside_access_in extended permit tcp any any eq 5432
access-list inside_access_in extended permit tcp any host PBXCUE eq www
access-list inside_access_in extended permit tcp host PBXCUE any eq www
access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
route print shows:
and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
How do I change it?
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.126 4250
0.0.0.0 0.0.0.0 On-link 192.168.1.240 21
80.51.24.22 255.255.255.255 192.168.2.1 192.168.2.126 4251
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
169.254.0.0 255.255.0.0 On-link 192.168.2.126 4506
169.254.104.126 255.255.255.255 On-link 192.168.2.126 4506
169.254.255.255 255.255.255.255 On-link 192.168.2.126 4506
192.168.1.240 255.255.255.255 On-link 192.168.1.240 276
192.168.2.0 255.255.255.0 On-link 192.168.2.126 4506
192.168.2.126 255.255.255.255 On-link 192.168.2.126 4506
192.168.2.255 255.255.255.255 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 192.168.1.240 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 192.168.2.126 4506
255.255.255.255 255.255.255.255 On-link 192.168.1.240 276
===========================================================================
I am starting to feel like I am using a bit too much of your friendliness ...
Best Regards and have a great day!
Lukasz -
VPN problem behind ASA5505 -regular translation creation failed for protocol 50
Dear All,
I have to connect behind my ASA5505 with an VPN klient to an other site.
First time i got this failure.
"Deny protocol 50 src inside:192.168.50.X dst outside:x.x.x.x by access-group "acl_in" [0x0, 0x0]"
Than I opened our inside (src 192.168.50.0) network the UDP 500,4500 TCP 500,4500,10000 and ESP (dest x.x.x.x remote firewall ip).
access-list acl_in extended permit esp host 192.168.50.0 host x.x.x.x eq isakmp
access-list acl_in extended permit udp host 192.168.50.0 host x.x.x.x eq 500
access-list acl_in extended permit eudp host 192.168.50.0 host x.x.x.x eq 4500
etc.
After that i could connect for the remote firewall with vpn client but i couldn't reach any PC1s on there side and ping gives back no anwser.
Deny protocol 50 was solved but i got an other problem:
"regular translation creation failed for protocol 50 src inside:192.168.50.X dst outside:x.x.x.x"
I found somewhere thet lines can help:
crypto isakmp nat-traversal
inspect ipsec-pass-thru
But this wasn't usefull.
I tried a many thing but i'm stuck.
Could somebody help me what can i do to solve this problem?
Thanks for all anwsers!The solution was the following for one IP!
object network x.x.x.x (inside IP)
host x.x.x.x (inside IP)
nat (inside,outside) static y.y.y.y (remote IP) -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Process_order api - Validation Failed for Field Bill To
I am relatively new to the EBS world and I'm having some issues with calling the OE_Order_Pub.Process_order API. When I call this API I am getting a return error of "Validation failed for field - Bill To".
For a background...I have an APEX application where users can choose parts from a small part master list to add to an existing order. The existing order will not have a status of Closed or Cancelled and there will be atleast 1 line in the order before the new parts are added. The parts will be added as new lines to the order with some of the new line data defaulting to the same information as the first line. I am using EBS version 12.1.3 with a multi-org setup. It seems that the orders under one org (id=3) are working fine, but another org(id=569) they never work and keep getting the error. I am setting the context to the org of the order and initializing the apps user information with the responsibility "Order Management Super User".
Do you have any idea what could be wrong or how I can debug the error to get a little more detail?
Here is the procedure I have.
PROCEDURE TEK_ORD_PROCESS_ORDER(p_order_id IN NUMBER, p_return_code OUT NOCOPY VARCHAR2, p_status OUT NOCOPY VARCHAR2) IS
CURSOR c_order_parts IS
SELECT *
FROM TEK_APEX.TEK_ORD_ORDER_PARTS
WHERE ORDER_ID = p_order_id;
TYPE t_parts IS TABLE OF TEK_APEX.TEK_ORD_ORDER_PARTS%ROWTYPE;
v_order_parts t_parts;
--Setup variables
H_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_UPDATE;
L_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_CREATE;
v_install_type VARCHAR2(25) := 'PTO';
v_source_id NUMBER;
v_user_id NUMBER;
v_resp_id NUMBER;
v_app_id NUMBER;
v_debug VARCHAR2(32767);
v_oracle_order OE_ORDER_HEADERS_ALL%ROWTYPE;
v_apex_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
p_header_rec OE_Order_Pub.Header_Rec_Type;
p_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
p_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
p_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
p_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
p_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
p_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
p_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
p_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
p_line_tab OE_Order_Pub.Line_Tbl_Type;
p_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
p_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
p_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
p_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
p_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
p_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
p_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
p_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
p_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
p_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
p_action_request_tab OE_Order_pub.Request_Tbl_Type;
l_header_rec OE_Order_Pub.Header_Rec_Type;
l_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
l_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
l_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
l_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
l_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
l_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
l_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
l_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
l_line_tab OE_Order_Pub.Line_Tbl_Type;
l_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
l_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
l_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
l_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
l_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
l_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
l_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
l_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
l_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
l_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
l_ret_status VARCHAR2(200);
l_msg_count NUMBER;
l_msg_data VARCHAR2(200);
--Email information
v_email_address varchar2(100);
v_msg_text varchar(1000);
v_subject_text varchar(1000);
--Default line information
v_item_id NUMBER;
v_contact_id NUMBER;
v_invoice_to_org_id oe_order_lines_all.INVOICE_TO_ORG_ID%TYPE;
v_ship_to_org_id oe_order_lines_all.SHIP_TO_ORG_ID%TYPE;
v_sold_to_org_id oe_order_lines_all.SOLD_TO_ORG_ID%TYPE;
v_flow_status_code oe_order_lines_all.FLOW_STATUS_CODE%TYPE;
FUNCTION GET_ORACLE_ORDER(p_order_number IN OE_ORDER_HEADERS_ALL.ORDER_NUMBER%TYPE)
RETURN OE_ORDER_HEADERS_ALL%ROWTYPE IS
v_order OE_ORDER_HEADERS_ALL%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM APPS.OE_ORDER_HEADERS_ALL
WHERE ORDER_NUMBER = p_order_number;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ORACLE_ORDER;
FUNCTION GET_APEX_ORDER(p_order_id IN TEK_APEX.TEK_ORD_SALES_ORDERS.ORDER_ID%TYPE)
RETURN TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE IS
v_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM TEK_APEX.TEK_ORD_SALES_ORDERS
WHERE ORDER_ID = p_order_id;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_APEX_ORDER;
FUNCTION GET_SOURCE_ID(p_source_name IN VARCHAR2)
RETURN OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE IS
v_source_id OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE;
BEGIN
SELECT ORDER_SOURCE_ID
INTO v_source_id
FROM APPS.OE_ORDER_SOURCES
WHERE NAME = p_source_name;
RETURN v_source_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_SOURCE_ID;
FUNCTION GET_ITEM_ID(p_part_number IN VARCHAR2, p_org_id IN NUMBER)
RETURN MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE IS
v_item_id MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE;
BEGIN
SELECT INVENTORY_ITEM_ID
INTO v_item_id
FROM APPS.MTL_SYSTEM_ITEMS
WHERE SEGMENT1 = p_part_number
AND ORGANIZATION_ID = p_org_id;
RETURN v_item_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ITEM_ID;
BEGIN
apps.mo_global.set_policy_context('S',3);
apps.mo_global.init('XXTEK');
BEGIN
SELECT USER_ID
INTO v_user_id
FROM APPS.FND_USER
WHERE USER_NAME = 'SYSADMIN';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting user');
END;
BEGIN
SELECT RESPONSIBILITY_ID, APPLICATION_ID
INTO v_resp_id, v_app_id
FROM TEK_APEX.TEK_RR_ACTIVE_RESP_VW
WHERE UPPER(RESPONSIBILITY_NAME) = 'ORDER MANAGEMENT SUPER USER';
--Set current user information
fnd_global.apps_initialize (user_id => v_user_id
,resp_id => v_resp_id
,resp_appl_id => v_app_id);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting responsibility');
END;
--Get the order information from Oracle and APEX
v_apex_order := GET_APEX_ORDER(p_order_id);
IF v_apex_order.ORDER_ID IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'APEX Order ID is invalid: ' || p_order_id);
END IF;
v_oracle_order := GET_ORACLE_ORDER(TO_NUMBER(v_apex_order.ORDER_NUMBER));
IF v_oracle_order.ORDER_NUMBER IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Order Number not found in Oracle: ' || v_apex_order.ORDER_NUMBER);
END IF;
apps.mo_global.set_policy_context('S', v_oracle_order.ORG_ID);
v_source_id := GET_SOURCE_ID('IMPORT');
IF v_source_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Source ID not found for IMPORT');
END IF;
/* ********** Gather Order Header********** */
/* ********** Info. ********** */
OE_Order_Pub.Get_Order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_id => v_oracle_order.HEADER_ID,
p_header => NULL,
x_header_rec => l_header_rec,
x_header_val_rec => l_header_val_rec,
x_Header_Adj_tbl => l_Header_Adj_tab,
x_Header_Adj_val_tbl => l_Header_Adj_val_tab,
x_Header_price_Att_tbl => l_Header_price_Att_tab,
x_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => l_Header_Scredit_tab,
x_Header_Scredit_val_tbl=> l_Header_Scredit_val_tab,
x_line_tbl => l_line_tab,
x_line_val_tbl => l_line_val_tab,
x_Line_Adj_tbl => l_Line_Adj_tab,
x_Line_Adj_val_tbl => l_Line_Adj_val_tab,
x_Line_price_Att_tbl => l_Line_price_Att_tab,
x_Line_Adj_Att_tbl => l_Line_Adj_Att_tab,
x_Line_Adj_Assoc_tbl => l_Line_Adj_Assoc_tab,
x_Line_Scredit_tbl => l_Line_Scredit_tab,
x_Line_Scredit_val_tbl => l_Line_Scredit_val_tab,
x_Lot_Serial_tbl => l_Lot_Serial_tab,
x_Lot_Serial_val_tbl => l_Lot_Serial_val_tab);
--Save defaults from first line
IF l_line_tab.EXISTS(1) THEN
v_contact_id := l_line_tab(1).SHIP_TO_CONTACT_ID;
v_invoice_to_org_id := l_line_tab(1).INVOICE_TO_ORG_ID;
v_ship_to_org_id := l_line_tab(1).SHIP_TO_ORG_ID;
v_sold_to_org_id := l_line_tab(1).SOLD_TO_ORG_ID;
v_flow_status_code := l_line_tab(1).FLOW_STATUS_CODE;
END IF;
--Clear out the line array before adding any new parts
FOR i IN l_line_tab.FIRST..l_line_tab.LAST LOOP
l_line_tab.DELETE(i);
l_line_val_tab.DELETE(i);
l_line_adj_tab.DELETE(i);
l_line_adj_val_tab.DELETE(i);
l_line_price_att_tab.DELETE(i);
l_line_adj_att_tab.DELETE(i);
l_line_adj_assoc_tab.DELETE(i);
l_line_scredit_tab.DELETE(i);
l_line_scredit_val_tab.DELETE(i);
l_lot_serial_tab.DELETE(i);
l_lot_serial_val_tab.DELETE(i);
END LOOP;
/* ********** Gather Order Lines ********** */
OPEN c_order_parts;
FETCH c_order_parts BULK COLLECT INTO v_order_parts;
CLOSE c_order_parts;
FOR i IN v_order_parts.FIRST..v_order_parts.LAST LOOP
v_item_id := GET_ITEM_ID(v_order_parts(i).PART_NUMBER, v_oracle_order.SHIP_FROM_ORG_ID);
IF v_item_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting part number ' || v_order_parts(i).PART_NUMBER);
END IF;
--Clear line first
l_line_tab(i) := OE_Order_Pub.G_Miss_Line_Rec;
l_line_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_VAL_REC;
l_line_adj_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_REC;
l_line_adj_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_REC;
l_line_price_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_REC ;
l_line_adj_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_REC;
l_line_adj_assoc_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_REC;
l_line_scredit_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_REC;
l_line_scredit_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_REC;
l_lot_serial_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_REC;
l_lot_serial_val_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_REC;
--Set line information
l_line_tab(i).PRICE_LIST_ID := v_oracle_order.PRICE_LIST_ID;
l_line_tab(i).header_id := v_oracle_order.header_id;
l_line_tab(i).inventory_item_id := v_item_id;
l_line_tab(i).ordered_quantity := v_order_parts(i).QUANTITY;
l_line_tab(i).operation := l_op_code;
l_line_tab(i).unit_list_price := 0;
l_line_tab(i).ship_from_org_id := v_oracle_order.ship_from_org_id;
l_line_tab(i).program_id := fnd_global.conc_program_id ;
l_line_tab(i).program_application_id := fnd_global.PROG_APPL_ID;
l_line_tab(i).order_source_id := v_source_id;
l_line_tab(i).calculate_price_flag := 'N' ;
l_line_tab(i).unit_selling_price := 0.00 ;
l_line_tab(i).request_date := v_apex_order.onsite_date;
l_line_tab(i).Schedule_ship_date := v_apex_order.onsite_date;
l_line_tab(i).promise_date := null;
l_line_tab(i).invoice_to_org_id := v_invoice_to_org_id;
l_line_tab(i).ship_to_org_id := v_ship_to_org_id;
l_line_tab(i).sold_to_org_id := v_sold_to_org_id;
l_line_tab(i).ship_to_contact_id := v_contact_id;
END LOOP;
--OE_DEBUG_PUB.DEBUG_ON;
--OE_DEBUG_PUB.Initialize;
--OE_DEBUG_PUB.SetDebugLevel(5);
--Add lines to order
OE_Order_Pub.Process_order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
p_action_commit => FND_API.G_FALSE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_rec => l_header_rec,
p_old_header_rec => l_header_rec,
p_header_val_rec => l_header_val_rec,
p_old_header_val_rec => l_header_val_rec,
p_Header_Adj_tbl => l_Header_Adj_tab,
p_old_Header_Adj_tbl => l_Header_Adj_tab,
p_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_old_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_Header_price_Att_tbl => l_Header_price_Att_tab,
p_old_Header_Price_Att_tbl => l_Header_price_Att_tab,
p_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_old_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_old_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_Header_Scredit_tbl => l_Header_Scredit_tab,
p_old_Header_Scredit_tbl => l_Header_Scredit_tab,
p_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_old_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_line_tbl => l_line_tab,
p_line_val_tbl => l_line_val_tab,
p_Line_Adj_tbl => l_line_adj_tab,
p_Line_Adj_val_tbl => l_line_adj_val_tab,
p_Line_price_Att_tbl => l_line_price_att_tab,
p_Line_Adj_Att_tbl => l_line_adj_att_tab,
p_Line_Adj_Assoc_tbl => l_line_adj_assoc_tab,
p_Line_Scredit_tbl => l_line_scredit_tab,
p_Line_Scredit_val_tbl => l_line_scredit_val_tab,
p_Lot_Serial_tbl => l_lot_serial_tab,
p_Lot_Serial_val_tbl => l_lot_serial_val_tab,
p_action_request_tbl => OE_ORDER_PUB.G_MISS_REQUEST_TBL,
x_header_rec => p_header_rec,
x_header_val_rec => p_header_val_rec,
x_Header_Adj_tbl => p_Header_Adj_tab,
x_Header_Adj_val_tbl => p_Header_Adj_val_tab,
x_Header_price_Att_tbl => p_Header_price_Att_tab,
x_Header_Adj_Att_tbl => p_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => p_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => p_Header_Scredit_tab,
x_Header_Scredit_val_tbl => p_Header_Scredit_val_tab,
x_line_tbl => p_line_tab,
x_line_val_tbl => p_line_val_tab,
x_line_adj_tbl => p_line_adj_tab,
x_line_adj_val_tbl => p_line_adj_val_tab,
x_line_price_att_tbl => p_line_price_att_tab,
x_line_adj_att_tbl => p_line_adj_att_tab,
x_line_adj_assoc_tbl => p_line_adj_assoc_tab,
x_line_scredit_tbl => p_line_scredit_tab,
x_line_scredit_val_tbl => p_line_scredit_val_tab,
x_lot_serial_tbl => p_lot_serial_tab,
x_lot_serial_val_tbl => p_lot_serial_val_tab,
x_action_request_tbl => p_action_request_tab);
-- OE_DEBUG_PUB.DEBUG_OFF;
p_return_code := l_ret_status;
IF l_ret_status != 'S' THEN
DBMS_OUTPUT.PUT_LINE(l_msg_data);
IF l_msg_count = 1 THEN
p_status := OE_Msg_Pub.Get(1,'F');
ELSE
FOR i IN 1..l_msg_count LOOP
p_status := OE_Msg_Pub.Get(i,'F') || '<br />';
END LOOP;
END IF;
p_status := 'Error loading lines<br>' || p_status;
ELSE
p_status := 'Order Processed Successfully<br>' || v_order_parts.COUNT || ' Line(s) Loaded';
END IF;
-- WHILE OE_DEBUG_PUB.G_DEBUG_INDEX < OE_DEBUG_PUB.CountDebug LOOP
-- OE_DEBUG_PUB.GetNext(v_debug);
-- DBMS_OUTPUT.PUT_LINE(v_debug);
-- END LOOP;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RAISE;
END TEK_ORD_PROCESS_ORDER;Thanks!
Jonathan HartHello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif -
Analysis Authorization failed for Multiprovider
Hi all,
We are facing an issue pertaining to the Analysis Authorization for a multiprovider. When we attempt to access a query base on a multiprovider, the program complains that it has insufficient authorization. So we did debugging in the customer exit and we realise it fails to populate the rest of the authorization variables in I_step = 0. Base on our initial investigation this only happens on queries on multiprovider, so is there anything I need to set or do to curb this error?
Many thanks!Best solution is to trace the authorization for your issue in ST01.
Switch on the trace in ST01 and start your work. if you face authoirzation check failed. look into the trace there you will find the logs and authorization failed for your userid.
And one more thing, have you got anything in SU53 as authorization check failed?
Hope this would help you. -
Tacacs authentication fails for one user account for only one switch
Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
Socket opens: 157
Socket closes: 156
Socket aborts: 303
Socket errors: 1
Socket Timeouts: 2
Failed Connect Attempts: 0
Total Packets Sent: 1703
Total Packets Recv: 1243
Expected Replies: 0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
PraseyHi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad -
I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution failed for dataset 'dataSet'.
(rsErrorExecutingCommand
Semantic query execution failed. Invalid object name
'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction? -
Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3
Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejithWelcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini -
Hello Community
Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully.
I was able to understand Event Viewer logs, there was supposed to be 4 possibilities
one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
the error still occurred.
Then I used a Powershell command that displayed output but the Output doesn't make sense
because it is saying the login failed associated with the database that was created by the Search
Service application when it was created.
But how can that username be related to the Search Service database? Below is the output:
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Site=/
Area : SharePoint Server
Category : Database
Level : High
EventID : 880i
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlCli
ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlCli
ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser
.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
opyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
in(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) a
t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
onString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient
.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sy
stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
derInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionF
actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
ons) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.
Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderB
ase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFa
ctory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCo
nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.S
qlConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
Area : SharePoint Server
Category : Database
Level : High
EventID : 880k
Message : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
eryData monitoringData, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
er(SqlCommand command, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.Schema
Database.GetSchemaHighLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
Time() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Admin
istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) a
t Microsoft.Office.Server.UserProfiles.Co...
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
e login failed.' Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
eNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Login failed for user Server1\User1.' Source: '.Net SqlClient Data Provider' Number: 18456
State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : tzku
Message : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15' ConnectionState: Closed ConnectionTimeout
: 15
Area : SharePoint Foundation
Category : Runtime
Level : Unexpected
EventID : tkau
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlClie
nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClie
nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.
Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
pyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
n(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
nString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.
SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sys
tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
erInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFa
ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
ns) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.D
ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBa
se.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFac
tory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCon
nection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.Sq
lConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection() at Microsoft.Office.S
erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
a, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
hLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime() at Microso
ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
nID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Administration.UserProfile
ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) at Microsoft.Office.Se
rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName) at Microsoft.Office.Server
.UserProfiles.CoreProperty.get_ManagedPropertyName() at Microsoft.SharePoint.Portal.WebControls.ProfileP
ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch) at Microsoft.SharePoint.Porta
l.WebControls.ProfileUI.LoadProfileTable() at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
rol(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.
Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control
.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.U
I.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
, Boolean includeStagesAfterAsyncPoint)
Area : SharePoint Foundation
Category : Monitoring
Level : Medium
EventID : b4ly
Message : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
What does that username have to do with the database created by Search Service Application creation
and why can't I "Edit my profile" in My Profile?
Thank you
ShabeautUse Netmon to analyze the traffic and understand more on same
Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
or mysite
http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
add the SQL Server details into the hosts file on the WFE server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
If this helped you resolve your issue, please mark it Answered -
Reports successfully execute but generate a login failed for user 'sa' err
I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.
Maybe you are looking for
-
Errors in application.log "Unexpected characters found in locale."
We have need seeing a lot of this error in our log. 50 or > at the same second. Developers feel that is the reason the application is becoming unresponsive and that Clients are calling in about the same time reporting that they are unable to access
-
My N80 has the white screen of death, which i'm sure is down too a faulty ribbon cable. Seen as though I've only had the phone for just over a year I took it too a nokia service centre, who told me it was out of warranty. I'm sure I read some where t
-
How to re-install CS3 on Windows 7 using discs?
Help! we are a charity and we use adobe CS3 to create amongst other things our 16 page newsletter. we have had this program for a number of years, but the computer that it is installed on is coming to the end of its day and it runs XP we have now ha
-
SQL 2014 Upgrade Advisor Won't Detect SQL Instance
I installed the Upgrade Advisor on my workstation. I was able to run the Advisor on 3 different servers from my workstation. When I tried the last 2 servers, the Advisor would not detect my Instance on the server. So, I installed the Advisor direct
-
So, I have Samba running on my server (which is using Arch, 64-bit), without any issues. It works fine, runs fine, and does what I need it to. Except it keeps trying to do something more. My log files have thousands of entries like: Jan 29 19:36:32