PGI failed due to opening period
Hi experts
I tried to post delivery, but it said " this posting period is only open in 1998/3 for company code 0001 :. I go to ob52 and try to extend.But one item 0001 + has the account assigned , I can't extend the period from 2000 to 2010
It said " Do not enter an account number for a masked account type" .
So what I can do to open this period? Thanks a lot
Alice
Please use tcode MMPV to close the current period and open the next period.
You have to close and open the period one by one. (e.g. close 1998/3, open 1998/4, -> then close 1998/4, open 1998/5 -> then.....)
Similar Messages
-
The compilation of my labview fpga vi fails with the error message "LabVIEW FPGA: The compilation failed due to timing violations, but there is no path information because the timing violations are not of type PERIOD".
In the 'final timing (place and route)' report, the requested frequencies are all below the maximum frequencies and the compilation error message is only displayed at the very end on the 'summary' page.
I tried to optimize my labview fpga vi with pipelining, but had no success.
Can anybody offer some advice on how to debug fpga code with this error? Is this really a timing error or something else?
Software:
Labview 2011, fpga 2011, xilinx tools 12.4 sp1
Hardware:
NI PXIe-1071 Chassis
NI PXIe-8108 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
The Xilinx log of the compilation run is attached.
Also, this issue was already discussed in this thread ~6 months ago, but no satisfying answer was offered so far...
Thanks,
Fabrizio
Attachments:
xilinxlogc.txt 2313 KBHi Kyle,
the problem is: I have one computer which compiles the VI successfully and a second one which shows that error. Both use the same software setup (LV2011SP1+RT+FPGA from DS2012-01). Both use the same project file - atleast SVN shows no difference.
- You can have one FPGA VI where one computer is compiling successful and a second one complains. (Btw. I have a SRQ running in Germany on this topic.)
- More problems: After successful compiling on first computer and transferring all to second computer (using SVN, including the full project folder with all files like bitfiles, lvproj, and everything) the second computer is unable to start the RT executable due to error "FPGA VI needs to recompile". Solution so far: Call the FPGA-OpenReference with the bitfile instead of the VI (as I used to do until now)...
- More problems: After modifying the FPGA-OpenReference to use the bitfile (on the 2nd computer) and transferring all the files back to the 1st computer (using SVN as before, including the whole project) the 1st computer complains: FPGA-OpenReference is creating a different reference than is used in the VI. So what happens here? On one computer my VI is ok, the reference is typed correctly. Transferring all the files to a different computer the VI isn't ok anymore due to changes of the reference??? You know: all files are the same: lvproj, FPGA bitfile didn't change, cRIO reference didn't change...
All those problems didn't occur on my RT-FPGA projects in LV2010SP1. I'm not pleased...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
by the login. The login failed.
Login failed for user 'HK\svc-scomsdk'.
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".Hi,
I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
Please go through the below article for details:
How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
http://support.microsoft.com/kb/936220/en-us
Regards,
Yan Li
Regards, Yan Li -
Financial Batch jobs were failing due to too many files opened
1) This issue started after upgrading the OS from windows 2003 to 2008 and PeopleSoft from 8.49 patch 10 to 8.52 to patch 9
I am also getting same kind of error
Below is the error message:
open of the file E:\Ftp\GL_IMP_571819.Log failed: Too many open files (2,633) GL_JRNL_IMP.PROCESS. GBLdefualt 1900-01-01.Import.On Execute PCPC:52127 statement:7333 -
Getting error in mailing program :Cause: FDPSTP failed due to ORA-29277
in the following program i am submitting a request and sending concurrent program log file (.REQ file)as an attachment but getting
following error,plese tell me where i am wrong
ORACLE error 29277 in FDPSTP
Cause: FDPSTP failed due to ORA-29277: invalid SMTP operation
ORA-06512: at "SYS.UTL_SMTP", line 44
ORA-06512: at "SYS.UTL_SMTP", line 150
ORA-06512: at "SYS.UTL_SMTP", line 383
ORA-06512: at "SYS.UTL_SMTP", line 399
ORA-0651
code:
CREATE OR REPLACE PACKAGE BODY APPS.xx_create_acct
AS
PROCEDURE submit_request(
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
Source_Application varchar2,
Application number,
Dummy_Parameter_0 varchar2,
Ledger number,
Process_Category varchar2,
End_Date varchar2,
Create_Accounting_Flag varchar2,
Dummy_Parameter_1 varchar2,
Accounting_Mode varchar2,
Dummy_Parameter_2 varchar2,
Errors_Only_Flag varchar2,
Report varchar2,
Transfer_to_GL_Flag varchar2,
Dummy_Parameter_3 varchar2,
Post_to_GL_Flag varchar2,
GL_Batch_Name varchar2,
Mixed_Currency_Precision Number,
Include_Zero_Amt_Lines_Flag varchar2,
Request_ID varchar2,
Entity_ID Number,
Source_Application_Name varchar2,
Application_Name varchar2,
Ledger_Name varchar2,
Process_Category_Name varchar2,
Create_Accounting varchar2,
Accounting_Mode_Name varchar2,
Errors_Only varchar2,
Report_Level varchar2,
Transfer_to_GL varchar2,
Post_in_GL varchar2,
Include_Zero_Amount_Lines varchar2,
Valuation_Method varchar2,
Security_ID_Integer_1 varchar2,
Security_ID_Integer_2 varchar2,
Security_ID_Integer_3 varchar2,
Security_ID_Char_1 varchar2,
Security_ID_Char_2 varchar2,
Security_ID_Char_3 varchar2,
Concurrent_Request_ID number,
P_INCLUDE_USER_TRX_ID_FLAG varchar2,
P_INCLUDE_USER_TRX_IDENTIFIERS varchar2,
P_DEBUG_FLAG varchar2
IS
l_senderemail VARCHAR2 (2000) := '[email protected]';
l_request_id NUMBER;
errmsg VARCHAR2 (1000);
req_id NUMBER;
phase VARCHAR2 (200);
status VARCHAR2 (200);
dphase VARCHAR2 (200);
dstatus VARCHAR2 (200);
MESSAGE VARCHAR2 (200);
wait_stat BOOLEAN;
l_file_name VARCHAR2 (200);
l_file_path VARCHAR2 (2000);
crlf VARCHAR2 (4) := CHR (13) || CHR (10);
v_set_layout_option BOOLEAN;
dir_name varchar2(100);
/* CURSOR req_status
IS
SELECT SUBSTR (outfile_name, 55, 23) filename,
SUBSTR (outfile_name, 1, 64) outfilepath
FROM applsys.fnd_concurrent_requests
WHERE request_id = l_request_id
AND phase_code = 'C'
AND status_code = 'C';*/
directory_path VARCHAR2 (2000);
lv_subject VARCHAR2 (100);
lv_msg VARCHAR2 (700);
lv_msghdr VARCHAR2 (100);
lv_pdf_filename VARCHAR2 (200);
BEGIN
apps.fnd_global.apps_initialize
(user_id => apps.fnd_global.user_id,
resp_id =>apps.fnd_global.resp_id,
resp_appl_id => apps.fnd_global.resp_appl_id
l_request_id :=
apps.fnd_request.submit_request
( 'BOM',
'CSTCRACCRCV',
NULL,
NULL,
FALSE,
Source_Application,
Application ,
Dummy_Parameter_0,
Ledger ,
Process_Category,
End_Date ,
Create_Accounting_Flag,
Dummy_Parameter_1 ,
Accounting_Mode ,
Dummy_Parameter_2,
Errors_Only_Flag,
Report ,
Transfer_to_GL_Flag,
Dummy_Parameter_3,
Post_to_GL_Flag ,
GL_Batch_Name ,
Mixed_Currency_Precision,
Include_Zero_Amt_Lines_Flag,
Request_ID ,
Entity_ID,
Source_Application_Name,
Application_Name,
Ledger_Name ,
Process_Category_Name,
Create_Accounting ,
Accounting_Mode_Name,
Errors_Only ,
Report_Level,
Transfer_to_GL,
Post_in_GL ,
Include_Zero_Amount_Lines,
Valuation_Method ,
Security_ID_Integer_1,
Security_ID_Integer_2,
Security_ID_Integer_3,
Security_ID_Char_1 ,
Security_ID_Char_2 ,
Security_ID_Char_3 ,
Concurrent_Request_ID,
P_INCLUDE_USER_TRX_ID_FLAG,
P_INCLUDE_USER_TRX_IDENTIFIERS,
P_DEBUG_FLAG
COMMIT;
IF (l_request_id <= 0)
THEN
errmsg := apps.fnd_message.get ();
ELSE
wait_stat :=
apps.fnd_concurrent.wait_for_request (l_request_id,
10,
360,
phase,
status,
dphase,
dstatus,
MESSAGE
IF dphase = 'COMPLETE'
THEN
dir_name :='XX_CREATE_ACCT_LOG';
l_file_name := 'l' || l_request_id || '.REQ';
lv_subject := NULL;
lv_msg := NULL;
lv_msghdr := NULL;
lv_pdf_filename := NULL;
lv_subject := 'testing mail :Request for Create Accounting not completed';
lv_msg :=
'Please find attachement here with the Status Of Create Accounting Reciving from cost management'
|| crlf;
lv_msghdr := 'Dear Sir' ;
lv_pdf_filename := l_file_name;
send_mail (l_senderemail,
'[email protected]',
lv_subject,
lv_msghdr,
lv_msg,
lv_pdf_filename,
'text/application',
dir_name
END IF;
END IF;
END submit_request;
PROCEDURE send_mail (
p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_subject IN VARCHAR2,
p_mailbodyhdr IN VARCHAR2,
p_mailbody IN VARCHAR2,
p_filename IN VARCHAR2,
p_filetype IN VARCHAR2,
dir_name in VARCHAR2
AS
v_msg VARCHAR2 (32000);
src_file BFILE;
i INTEGER := 1;
v_raw RAW (500);
v_length INTEGER := 0;
v_buffer_size INTEGER := 57;
v_mailconn UTL_SMTP.connection;
gc_crlf VARCHAR2 (4) := CHR (13)
|| CHR (10);
gc_lf VARCHAR2 (4) := CHR (10);
crlf VARCHAR2 (2) := CHR (13)
|| CHR (10);
gc_mailhost VARCHAR2 (255) := '172.16.11.2';
-- gc_maildomain VARCHAR2 (255) := 'pune.com';
msg VARCHAR2 (32767);
boundary CONSTANT VARCHAR2 (256)
:= '-----7D81B75CCC90D2974F7A1CBD';
first_boundary CONSTANT VARCHAR2 (256)
:= '--' || boundary || UTL_TCP.crlf;
last_boundary CONSTANT VARCHAR2 (256)
:= '--' || boundary || '--' || UTL_TCP.crlf;
-- A MIME type that denotes multi-part email (MIME) messages.
multipart_mime_type CONSTANT VARCHAR2 (256)
:= 'multipart/mixed; boundary="' || boundary || '"';
BEGIN
DBMS_OUTPUT.ENABLE (100000);
--fnd_file.put_line (fnd_file.output, '------------------------------------------------------' );
v_mailconn := UTL_SMTP.open_connection (gc_mailhost, 26);
UTL_SMTP.helo (v_mailconn, gc_mailhost);
UTL_SMTP.mail (v_mailconn, p_sender);
UTL_SMTP.rcpt (v_mailconn, p_recipient);
UTL_SMTP.open_data (v_mailconn);
msg :=
'Date: '
|| TO_CHAR (SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss')
|| crlf
|| 'From:[email protected] '
-- || p_sender
|| crlf
|| 'Subject: '
|| p_subject
|| crlf
|| 'To: [email protected]'
-- || p_recipient
|| crlf
|| 'MIME-Version: 3.1'
|| crlf
|| -- Use MIME mail standard
'Content-Type: multipart/mixed;'
|| crlf
|| ' boundary="-----SECBOUND"'
|| crlf
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type: text/plain;'
|| crlf
|| 'Content-Transfer_Encoding: 7bit'
|| crlf
|| crlf
|| p_mailbodyhdr
|| crlf
|| crlf
|| p_mailbody
|| crlf
|| crlf
|| crlf
|| crlf
|| -- Message body
'Regards'
|| crlf
|| 'HR and Payroll Team'
|| crlf
|| crlf
|| ' Note- Please ignore the leave status and number of days.'
|| crlf
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type'
|| ': '
|| p_filetype
|| crlf
|| 'Content-Disposition: attachment; filename="'
-- || 'Create Accounting'
-- || '.REQ'
||p_filename -- p_filename
|| '"'
|| crlf
|| 'Content-Transfer-Encoding: base64'
|| crlf
|| crlf;
UTL_SMTP.write_data (v_mailconn, msg);
src_file := BFILENAME (dir_name, p_filename);
DBMS_LOB.fileopen (src_file, DBMS_LOB.file_readonly);
v_length := DBMS_LOB.getlength (src_file);
WHILE i < v_length
LOOP
DBMS_LOB.READ (src_file, v_buffer_size, i, v_raw);
UTL_SMTP.write_raw_data (v_mailconn,
UTL_ENCODE.base64_encode (v_raw)
UTL_SMTP.write_data (v_mailconn, UTL_TCP.crlf);
i := i + v_buffer_size;
END LOOP while_loop;
UTL_SMTP.write_data (v_mailconn, last_boundary);
UTL_SMTP.write_data (v_mailconn, UTL_TCP.crlf);
DBMS_LOB.fileclose (src_file);
UTL_SMTP.close_data (v_mailconn);
UTL_SMTP.quit (v_mailconn);
EXCEPTION
WHEN OTHERS
THEN
UTL_SMTP.quit (v_mailconn);
DBMS_OUTPUT.put_line (SQLCODE || SQLERRM);
-- FND_FILE.PUT_LINE (FND_FILE.LOG,'error while fetching values from CO_CODE'|| SQLERRM );
END send_mail;
END xx_create_acct;Edited by: BluShadow on 18-Apr-2011 09:49
added {noformat}{noformat} tags. Please see the [url=SQL and PL/SQL FAQ and PL/SQL FAQ[/url] for info on how to post on the forumsI didn't get the information, What I want. Anyway, in the BLOB writing portion you have to create a temporary LOB and load your file into that temporary LOB and the write it into chunks.
Something like
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;For more example see these posts:
Re: Sending UTL_SMTP mail with single jpg attachment issue
Re: getting junk letters instead of photo in an email. -
Fdpstp failed due to ora-12899 value too large for column
Hi All,
User facing this problem while running the concurrent program.
the program is complted but with rhis error.
fdpstp failed due to ora-12899 value too large for column
Can any one tell me the excat solution for this?
RDBMS : 10.2.0.3.0
Oracle Applications : 11.5.10.2User facing this problem while running the concurrent program.
the program is complted but with rhis error.Is this a seeded or custom concurrent program?
fdpstp failed due to ora-12899 value too large for column
Can any one tell me the excat solution for this?Was this working before? If yes, any changes been done recently?
Can other users run the same concurrent program with no issues?
Please post the contents of the concurrent request log file here.
Please ask your developer to open the file using Reports Builder and compile the report and run it (if possible) with the same parameters.
OERR: ORA-12899 value too large for column %s (actual: %s, maximum: %s) [ID 287754.1]
Thanks,
Hussein -
If anyone is able to solve this they are a genius (or I am doing something very stupid!)
I am trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit PC but setup.exe fails due to a msxml3.dll error.
Following a big bundle of recent Windows 7 updates, I started getting 'bad image' msxml3.dll error messages when opening any CS5.5 master collection program (Eg Premiere / Photoshop / Illustrator / Dreamweaver). Following advice on some threads here I tried uninstalling and then using the Adobe CC Cleaner Tool to clean up install, then reinstalling from my original DVD media.
Whenever I try using run setup.exe from installtion disc 1 the installing fails due to 'Missing files'. I have also tried dowloading trial versions and runing setup.exe fro mthe downloaded files but i still get the same message.
I have searched the forum and others have experienced this error but none of the solutions I have found seem to be working for me - as many seem to relate to download installations whereas I am installing from original DVD media (which worked fine before on the same PC)
These are the FATAL messages from the PDApp log
12/11/2014 15:29:27 [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154
12/11/2014 15:29:27 [FATAL] Setup - Could not initialize ADXML object
12/11/2014 15:29:27 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
The PDApp troubleshooting seems to indicate that this is caused by error in downloads but I am getting it with both original media DVD and downloads.
I have also tried using my logon (which has admin privileges) and under our main admin account - and I get the same errors.
Is a clean install of Windows 7 + CS5.5 my only option?
Any help / info / advice / solutions very much appreciated! I have spent the last 2 days trying to sort this out and seem to be getting nowhere.
Thanks.Thanks for the reply kglad - much appreciated.
I have already tried that option (along with downloading files) as it was one of the solutions mentioned on other threads, but that also failed.
Any other ideas? -
OMF export failed due to internal error
I get this error message whatever I do when I try to export as OMF:
"OMF export failed due to internal error"
I tried OMF 1 and 2.
I tried to uncheck "include audio".
I tried an extremely small project (one region, one track).
Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
All other export options (AFF, Open TL and Final Cut) works.
Any ideas?I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge -
"Enterprise manager configuration failed due to the ff... 11 g/windows 7
I get this error message, when using DBCA to create a database. Please help! Studying on my own for OCA.
Error message : "Enterprise manager configuration failed due to the following error - Listener is not up or database service is not registered with it. Start the listener and register database service and run EM Configuration Assistant again."
I did the following :
(1)Checked listener service properties and found that the path to executable was
driveletter:\app\product\11.1.0\db_2\bin\oracle.exeoca11g
I change the path above to what is listed below:
driveletter:\app\product\11.1.0\db_2\bin\tnslsnr
I updated :HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOCA11gTNSListener
image file to reflect the change .
I got the above suggestion from a blog. Not sure if it is right or wrong, but it seems logical. However, it did not resolve my issue
(2) I ran the emca script in db_home/bin directory as suggested by the warning message in DBCA wizard. Reboot my PC. Still no luck.
(3) I open DBCA to verify the database(via delete) is created, and yes it is .
I open EM and attempted to log into the tool as Sys/sysdba user. I get username and/or password are invalid error message. URL: https(strike-through)localhost://158/em/console/logon/logon
I can connect to SQl plus as either a sys/sysdba user but into EM.Ok here is my listener status
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 25-JAN-2013 14:01
:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 25-JAN-2013 07:12:48
Uptime 0 days 6 hr. 49 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\Barbara\product\11.2.0\dbhome_2\network\admin\l
istener.ora
Listener Log File c:\app\barbara\diag\tnslsnr\Lenovo-PC\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "OCA11GXDB" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "OCA2XDB" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "oca11g" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "oca2" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
This is the OracleoraDB11g_home1TNSlistner image file value is this
C:\app\Barbara\product\11.2.0\dbhome_2\BIN\TNSLSNR
Aaaah! I do not like the sound of this. Oracle enterprise edition does not support windows home edition and Oracle XE does not have DBCA included.
Ok, so this is a road block, please suggest alternative routes.
Thanks
Edited by: Ant13 on Jan 25, 2013 2:21 PM
Edited by: Ant13 on Jan 25, 2013 2:33 PM -
My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.
Hello,
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over. -
The loading of OPSS java security policy provider failed due to exception
Hi,
The issue is execution of startWebLogic.cmd failed,once shutting down the system and restarting it.At first time,after the installation ,it worked and I was able to log in to web logic server.I also created boot.properties file with user name and password for web logic server in user_projects/domains/UCM_domain/server/admin server/security folder.
The operating system is windows xp, with 32 bit,oracle web logic version 11g, and UCM version 11.1.1.4.0.
the error log is:
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based farm keystore failed.
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:351)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:101)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
####<Aug 10, 2011 4:18:13 PM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293797> <BEA-000365> <Server state changed to FAILED>
####<Aug 10, 2011 4:18:13 PM IST> <Error> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293797> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Aug 10, 2011 4:18:13 PM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293812> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Aug 10, 2011 4:18:13 PM IST> <Info> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293828> <BEA-000236> <Stopping execute threads.>Thanks René van Wijk for the reply.
I tried the action u replied for my question, but the same error again continued.iam unable to login in admin server.
The main error is **Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider**
** at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)**
the message in the error log is
<BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based farm keystore failed.
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:351)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:101)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
####<Aug 11, 2011 11:09:57 AM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000365> <Server state changed to FAILED>
####<Aug 11, 2011 11:09:57 AM IST> <Error> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Aug 11, 2011 11:09:57 AM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Aug 11, 2011 11:09:57 AM IST> <Info> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197218> <BEA-000236> <Stopping execute threads.> -
Import of a request failing : ERROR: connect failed due to DbSL load lib fa
Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
Transport control program tp ended with error code 0249
Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Request: E08K901525
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAYHi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit. -
Error: NDMP operation failed due to media error
I scheduled a RMAN backup job on oracle 11g EM and sometime it failed when running datafile backup. The log showed the error come from media layer and did not specify detail message. We used secure backup to transfer data to tape. There are 4 tape drivers in service, but only one of them always return this error. Could anyone tell how to resolve the problem ?
RMAN-03009: failure of backup command on c1 channel at 01/23/2014 11:17:29
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
sbtclose2: Internal error - NDMP Data Service has exited prematurely.
For more information, please check the transcript for this job ('oracle/33779.1').
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
Additional information: 1292
ORA-19511: Error received from media manager layer, error text:
continuing other job steps, job failed will not be re-run
And I found below logs in the secure backup scripts log. it that mean a network error?
10:16:42 await_ndmp_event: sending progress update
10:16:42 SPU: sending progress update
10:17:43 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10452672, nfiles 0
10:17:43 await_ndmp_event: sending progress update
10:17:43 SPU: sending progress update
10:19:35 NWEM: saw tape write error log message ("tape write failed due to media error")
tape write failed due to media error
10:19:35 MNPO: mover halted with reason=media error
10:19:35 MGS: ms.record_size 65536, ms.record_num 0x28094, ms.bytes_moved 0x280940000
10:19:35 QTOS: received osb_stats message for job oracle/33656.1, kbytes 10497280, nfiles 0
10:19:35 MNPO: data service halted with reason=connection error
10:19:35 SNPD: Data Service reported bytes processed 0x280B40000
10:19:53 A_T: suppressing filemark output due to NDMP having written one
10:19:53 A_T: writing marker label; here it is:Judging by the transcript snips that you provided, I also believe that this is caused by a bad drive or bad media.
Start by looking at the output of the command :
# obtool dumpdev <tape_drive_name>
(replace "<tape_drive_name>" by the name of the drive which was used during the failed job).
Look for any errors or warnings during the date/time the backup job failed. These message usually provide a good idea about the problem that occurred.
Next try the same backup using the same media in another drive to see it the problem reoccurs or not. In case the problem reoccurs, there's a good chance that the media is bad. If the backup succeeds on another drive, then try the same backup using the original drive but with a new media. If the backup fails again on the same drive using new media, you should open a support request with the tape drive vendor. In that case, collect the logs from the tape library (and dump the tape drives is possible).
HTH,
Gio -
Can't open period-GLOOAP try to create ccid with Seg1 invalid by Sec Rules
Hi,
12 months ago, we done a accounting recoding (by legal changes) in two portuguese company which belong our business group. We only change segment1 (17 value by 10... value 10 was desactived by security rules) and we create new ccid's by changing of accounts (for example,.. 10.590000.000.00.000.00000 changed to 17.561000.000.00.000.00000)... Also, we change all accounting configuration in all modules (PO, GL, AP, AR,..) for adapting to new needs.
It hasn't had any incident about this change.
However, now, when we try to open a new period (00-11), process for opening period fail... It only occur in one company which we did this change (in other portuguese company, it wrok fine).
the log of process indicates that process cann't create a ccid (i think it is trying to create it dinamically) but the question is that segment1 (10) is desactived by security rules (new ccids should be created with segment1 ='17').
My question is: Where is process extract segment1 for trying to create this new ccid? this process is Spawned and I cann't opened it.
This problem has only occured when we try to open 00-11 period... in before periods it opened fine.
Best Regards,
RicardoHi Octavio,
I have activated a trace but it indicate same error:
SELECT /* $Header: fdfval.lc 115.46 2003/07/10 16:04:31 hgeorgi ship $ */
U.flex_value_rule_id, R.error_message,
L.include_exclude_indicator, L.flex_value_low,
L.flex_value_high
FROM
fnd_flex_value_rule_usages U, fnd_flex_value_rule_lines L,
fnd_flex_value_rules_VL R WHERE U.flex_value_set_id = :vsid AND
U.application_id = :applid AND U.responsibility_id = :respid AND
U.flex_value_rule_id = L.flex_value_rule_id AND U.flex_value_rule_id =
R.flex_value_rule_id ORDER BY U.flex_value_rule_id,
L.include_exclude_indicator desc
call count cpu elapsed disk query current rows
Parse 1 0.01 0.00 0 0 0 0
Execute 1 0.01 0.01 0 0 0 0
Fetch 1 0.00 0.00 0 6 0 2
total 3 0.02 0.01 0 6 0 2
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer goal: CHOOSE
Parsing user id: 181
Rows Row Source Operation
2 SORT ORDER BY
2 NESTED LOOPS
2 NESTED LOOPS
2 NESTED LOOPS
2 INDEX RANGE SCAN (object id 32506)
2 INDEX UNIQUE SCAN (object id 32498)
2 TABLE ACCESS BY INDEX ROWID FND_FLEX_VALUE_RULES_TL
2 INDEX UNIQUE SCAN (object id 32501)
2 INDEX RANGE SCAN (object id 32504)
SELECT code_combination_id
FROM GL_CODE_COMBINATIONS CC
WHERE
SEGMENT1 = '10'
AND SEGMENT2 = '561000'
AND SEGMENT3 = '000'
AND SEGMENT4 = '00'
AND SEGMENT5 = '000'
AND SEGMENT6 = '00000'
AND CHART_OF_ACCOUNTS_ID = 50235
AND TEMPLATE_ID IS NULL
call count cpu elapsed disk query current rows
Parse 1 0.02 0.02 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.06 14 18 0 0
total 3 0.02 0.08 14 18 0 0
Misses in library cache during parse: 1
Optimizer goal: CHOOSE
Parsing user id: 181
Rows Row Source Operation
0 TABLE ACCESS BY INDEX ROWID GL_CODE_COMBINATIONS
21 INDEX RANGE SCAN (object id 850252)
begin fnd_file.close; end;
I have could read that Open Period program looks in the GL_BALANCES and it will attempt to use/Create the retaining account combination for each balancing segment value showing activity but retaining account combination is 17-561000-000-00-000-00000 ...
Best Regards -
Workbook: Document store operation failed due to missing authorization
Hello authorizer gurus,
I have got 3.5.
I have transported.
I try to open a workbook.
I am getting a Error Message:
Document store operation failed due to missing authorization
Newly saved Queries as workbook can be openend.
What's wrong ?
Thank You
Martin SautterMartin,
To get a detailed message about the error (including which authorization objects the user needs to have to be able to perform the action that caused the error) use ST22. It sounds like they are missing the Open authorization for workbooks.
Cheers,
Rusty
Maybe you are looking for
-
Itunes 10.5 keeps opening by itself on my pc
Itunes 10.5 keeps opening up by itself on my pc I have just about tried everything . Help !
-
Had an Airport Express hooked up to an ethernet connection in my basement as my base station with a second Express in my office as a relay connected to my printer as a USB peripheral. Then I went and bought an Airport Extreme in order to have a USB h
-
Changing Buffer Size - Logic Tweaks Out
I find that I'm unable to change the buffer size (for instance, after I record and want to play back without any glitches) without having to quit Logic and reload the file. I usually get a message that "some plug-ins have been disabled." Everything i
-
Problem with report authorizations
Hi, I have assinged role with same set of query. A second role works like restriction to Business Area (for example: L000). problem: It doesn't work with InfoProviders of CO module. I want to make the restriction authorization of the users like I sai
-
CP5: Roll-over hand not appearing on button
Ok - I have 2 different buttons and one the hand appears when the user rolls over the button and on the other it does not (even though I have the option checked in properties). The two types of buttons I have: 1. transparent button over an image 2. t