Phanfare Type Application

I was hoping for some help. I was asked to develop an app
that is similar to Phanfare.
www.Phanfare.com Not so much the
client application, but the ability for the user to upload photos,
add music and do zoom and pan for each picture creating a virtual
slide show. Is FLEX capable of doing this? If not can someone point
me in the right direction.
Thanks for the help in advance.
Robert

Here is a link to a sample app that does some photo stuff. I
also recall someone doing a fuller featured production app using
flex 1.5, but haven't found it yet.
Tracy
http://www.garyrgilbert.com/dev/photoalbum/

Similar Messages

  • Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

    Hi Gurus,
    Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
    The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
    The process chain contains processes for:
    - starting the process chain
    - executing infopackage (for loading data to 0figl_o10),
    - ACR (activate data in 0figl_o10)
    - delete index 0figl_c10
    - DTP loading data from 0figl_o14 to 0figl_c10    
    - executing infopackage 80FIGL_O10
    - creating index in 0figl_c10
    - building DB statistics
    - rolling up aggregates in 0figl_c10
    - deleting of requests from the changelog 0figl_o10
    - deleting of requests from PSA (0fi_gl_10)
    How to find what cause that error.
    Regards,
    Leszek

    Hi,
    A SAP consultant told me to ignore that error. 
    Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
    The problem is described in sap note: 883745.
    Regards, Leszek  

  • MIME TYPE ; application/vnd.ms-excel

    HI
    i have bsp page which i have declared mime type application/vnd.ms excel the idea is to download the entire contents in local machine . when i click generate excel i get 3 buttons open ,save ,cancel. how can i capture the event open in the page .a sample code will be very helpfull
    reagrds
    Prasun

    Hi
    This is sample code need to be declared in the OnInputProcessing an event for an ID:
    data:
      w_event type ref to cl_htmlb_event,
      w_obj type ref to object,
      w_mod type ref to cl_htmlb_inputfield,
      w_module type string.
      data:
       tv type ref to cl_htmlb_tableview,
       tv_data type ref to cl_htmlb_event_tableview.
      call method cl_htmlb_manager=>get_event
      exporting
        request = runtime->server->request
      receiving
        event   = w_event.
      case w_event->id.
      when 'open'.
        call method cl_htmlb_manager=>get_data
          exporting
            request = runtime->server->request
            name    = 'inputfield'
            id      = 'module'
          receiving
            data    = w_obj.
           w_mod ?= w_obj.
           w_module = w_mod->value.
    endcase.
    'open' this open you need to declare in HTMLB  Button Tag with Option ID...in this way as soon as you click the Button OPEN the Event will be triggered
    Regards,
    Rajani

  • How to get at a mail of MIME type application/vnd.ms-excel?

    My java proggie has to deal with an email sent with Outlook '97 (don't ask me why it has to be that) and this email has the following header fields (see below). Now, my program works fine if the email has MIME type multipart/mixed. So, how do I have to do to handle an email of MIME type application/vnd.ms-excel (outline of logic or even some code snippet will be greatly appreciated)?
    Received: by chk_exchange6.whatever.local
         id <01C83718.A96E9AC0@chk_exchange6.whatever.local>; Wed, 5 Dec 2007 16:27:24 +0800
    Message-ID: <E839E45C64CF7E4D9E4E8A334B79363001F0DB62@chk_exchange6.whatever.local>
    From: "somebody" <[email protected]>
    To: "me" <[email protected]>
    Subject: excel attached
    Date: Wed, 5 Dec 2007 16:27:24 +0800
    MIME-Version: 1.0
    Content-Type: application/vnd.ms-excel;
         name="nevermind.xls"
    Content-Transfer-Encoding: base64
    Content-Disposition: attachment;
         filename="nevermind.xls"
    Edited by: dickensl on Dec 5, 2007 11:47 PM

    Depends on what you want to do with it.
    If you want to access the data in the Excel spreadsheet
    and make sense of it, you're going to need some
    Java classes to interpret an Excel spreadsheet.
    Good luck on that. :-)
    If you just want to save the content in a file, as if it
    were an attachment, use msg.getInputStream()
    and copy the data to a file, like this:
            OutputStream out = null;
            InputStream in = null;
            try {
                out = new BufferedOutputStream(new FileOutputStream(file));
                in = msg.getInputStream();
                byte[] buf = new byte[8192];
                int len;
                while ((len = in.read(buf)) > 0)
                    out.write(buf, 0, len);
            } finally {
                // close streams, but don't mask original exception, if any
                try {
                    if (in != null)
                        in.close();
                } catch (IOException ex) { }
                try {
                    if (out != null)
                        out.close();
                } catch (IOException ex) { }
            }

  • Unsupported Content-Type: application/soap+xml

    I've created a simple composite application with a bpel jbi module using glassfishesbv21.
    The bpel process starts when I invoke a webservice (soap-binding).
    When I run a test case for the ca everything works fine.
    When I call the webservice from an external web application, the client (created with netbeans wizard bundled in glassfishesbv21) obtains the response as expected and doesn't report any exception while the server rises a com.sun.xml.ws.server.UnsupportedMediaException.
    Googoling I found that this maybe caused by the use of soap1.1 and soap1.2 but is also true that JAX-WS runtime should look into the WSDL to determine the binding being used and configures itself accordingly.
    the stacktrace is:
    Finished processing outbound messages.
    Request doesnt have a Content-Type
    com.sun.xml.ws.server.UnsupportedMediaException: Request doesnt have a Content-Type
    at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:267)
    at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:276)
    at com.sun.xml.ws.transport.http.HttpAdapter.invokeAsync(HttpAdapter.java:341)
    at com.sun.jbi.httpsoapbc.embedded.JAXWSGrizzlyRequestProcessor.processAsynchRequest(JAXWSGrizzlyRequestProcessor.java:386)
    at com.sun.jbi.httpsoapbc.embedded.JAXWSGrizzlyRequestProcessor.service(JAXWSGrizzlyRequestProcessor.java:220)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:647)
    at com.sun.jbi.httpsoapbc.embedded.JBIGrizzlyAsyncFilter.doFilter(JBIGrizzlyAsyncFilter.java:95)
    at com.sun.enterprise.web.connector.grizzly.async.DefaultAsyncExecutor.invokeFilters(DefaultAsyncExecutor.java:175)
    at com.sun.enterprise.web.connector.grizzly.async.DefaultAsyncExecutor.interrupt(DefaultAsyncExecutor.java:153)
    at com.sun.enterprise.web.connector.grizzly.async.AsyncProcessorTask.doTask(AsyncProcessorTask.java:92)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
    at com.sun.enterprise.web.connector.grizzly.WorkerThreadImpl.run(WorkerThreadImpl.java:116)
    Unsupported Content-Type: application/soap+xml Supported ones are: [text/xml]
    com.sun.xml.ws.server.UnsupportedMediaException: Unsupported Content-Type: application/soap+xml Supported ones are: [text/xml]
    at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:291)
    at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:128)
    ====[com.sun.xml.ws.assembler.server:request]====
    <?xml version="1.0" ?>
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing">
    <soap-env:Header>
    <wsa:Action>http://schemas.xmlsoap.org/ws/2004/09/transfer/Get</wsa:Action>
    <wsa:To>http://localhost:19081/coreAnagrafeUpdateService/coreAnagrafeUpdatePort</wsa:To>
    <wsa:ReplyTo>
    <wsa:Address>http://www.w3.org/2005/08/addressing/anonymous</wsa:Address>
    </wsa:ReplyTo>
    <wsa:MessageID>uuid:778b135f-3fdf-44b2-b53e-ebaab7441e40</wsa:MessageID>
    </soap-env:Header>
    <soap-env:Body></soap-env:Body>
    </soap-env:Envelope>
    ============
    ====[com.sun.xml.ws.assembler.server:response]====
    <?xml version="1.0" ?>
    <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
    <S:Body>
    <S:Fault xmlns:ns3="http://www.w3.org/2003/05/soap-envelope" xmlns="">
    <faultcode>S:Server</faultcode>
    <faultstring>javax.jbi.messaging.MessagingException: HTTPBC-E00798: Message normalization failed</faultstring>
    </S:Fault>
    </S:Body>
    </S:Envelope>
    ============
    Unsupported Content-Type: application/soap+xml Supported ones are: [text/xml]
    com.sun.xml.ws.server.UnsupportedMediaException: Unsupported Content-Type: application/soap+xml Supported ones are: [text/xml]
    at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:291)
    at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:128)
    at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:287)
    ====[com.sun.xml.ws.assembler.server:request]====
    <?xml version="1.0" ?>
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing">
    <soap-env:Header>
    <wsa:Action>http://schemas.xmlsoap.org/ws/2004/09/transfer/Get</wsa:Action>
    <wsa:To>http://localhost:19081/coreAnagrafeUpdateService/coreAnagrafeUpdatePort/mex</wsa:To>
    <wsa:ReplyTo>
    <wsa:Address>http://www.w3.org/2005/08/addressing/anonymous</wsa:Address>
    </wsa:ReplyTo>
    <wsa:MessageID>uuid:778b135f-3fdf-44b2-b53e-ebaab7441e40</wsa:MessageID>
    </soap-env:Header>
    <soap-env:Body></soap-env:Body>
    </soap-env:Envelope>
    ============
    the wsdl is:
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <definitions name="coreAnagrafeUpdateService"
    targetNamespace="http://service.box.nexus.com/"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:tns="http://service.box.nexus.com/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <types>
         <xsd:schema>
    <xsd:import namespace="http://service.box.nexus.com/" schemaLocation="core_anagrafe.xsd"/>
    </xsd:schema>
    </types>
    <message name="coreAnagrafeUpdateOperationRequest">
    <part name="parameters" element="tns:requestParameter"/>
    </message>
    <message name="coreAnagrafeUpdateOperationResponse">
    <part name="parameters" element="tns:coreAnagrafeResponse"/>
    </message>
    <message name="coreAnagrafeUpdateOperationFault">
    <part name="part1" element="tns:faultMessage"/>
    </message>
    <portType name="coreAnagrafeUpdatePortType">
    <operation name="coreAnagrafeUpdateOperation">
    <input message="tns:coreAnagrafeUpdateOperationRequest"/>
    <output message="tns:coreAnagrafeUpdateOperationResponse"/>
    <wsdl:fault name="fault1" message="tns:coreAnagrafeUpdateOperationFault"/>
    </operation>
    </portType>
    <binding name="coreAnagrafeUpdateBinding" type="tns:coreAnagrafeUpdatePortType">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
    <operation name="coreAnagrafeUpdateOperation">
    <soap:operation soapAction=""/>
    <input>
    <soap:body use="literal" />
    </input>
    <output>
    <soap:body use="literal" />
    </output>
    <wsdl:fault name="fault1">
    <soap:fault use="literal" name="fault1"/>
    </wsdl:fault>
    </operation>
    </binding>
    <service name="coreAnagrafeUpdateService">
    <port name="coreAnagrafeUpdatePort" binding="tns:coreAnagrafeUpdateBinding">
    <soap:address location="http://localhost:19081/coreAnagrafeUpdateService/coreAnagrafeUpdatePort"/>
    </port>
    </service>
    </definitions>
    Can anyone help me to understand the problem and solve it?
    Thanks in advance.

    Hi,
    Content-Type: application/xml
    ...check for the content type of the message that is sent ot the WS.....with the above mentioned content-type going to the WS currently...WS is not able to parse the req and hence the error....in other words wrong format being being passed.
    Regards,
    ABhishek.

  • How to create dynamic calc account in multi-plan type application

    Hi expert,
    I have a planning application with 3 plan types.
    I created a calculation script which fixed on accounts in plan type 1 only and the calculation suppose to calculate a "dynamiccalc" account with a member formula attached. Everytime I run the script, it takes very long time and I found there are sessions at the back of essbase with "Process local xref/xwrite request" request to other plan types.
    It does not has this kind of session if I change the account to "store".
    Would like to check, is it possible to create a dynamic calc account to calculate for only 1 plan type in a multi-plan type application? Is there any special setting that I need to do to enable this? I already selected source plan type as Plan type 1 for my dynamic calc account. Please help!
    Many thanks!!
    My HP application is on version 11.1.2.1.

    Hi Jake,
    Thanks for pointing out the check box. Overlooked it and the checkbox was not unchecked, even I only wanted the account to exist in 1 of the plan type.
    However, after I unchecked and refresh now, when I run the calc script, it still trigger process at the back to the other 2 plan types with "Process local xref/xwrite request" request. What else could I have missed?
    I already added the "HSP_Nolink" UDA to all accounts in plan type 2 and plan type 3 and confirmed that there's no account with "Xref" member formula, I really don't know why it is trying to process local xref request. Can anyone help??
    Many thanks!!!

  • Content-type: application/xml and Application server 9

    I have a web service running on Application server 9, implemented using netbeans and JAX-WS.
    When a client sends a request to it with:
    Content-type: application/xml
    the request is rejected because the server does not recognise the mime type.
    Specifically, the response is:
    HTTP/1.1 415 Unsupported Media Type
    X-Powered-By: Servlet/2.5
    Content-Type: text/plain; charset=iso-8859-1
    Date: Fri, 01 Sep 2006 14:49:04 GMT
    Server: Sun Java System Application Server Platform Edition 9.0
    Connection: close
    Everything works fine when the request has:
    Content-type: text/xml
    Is there a way to make my web service accept content type of 'application/xml'?
    -Tony Beaumont
    Aston University
    beaumoaj

    I have fixed this for myself, i.e. decompile, replace in jar.
    My problem was that most tools define the encoding but code was simply testing
    if( contentType.equalsIgnoreCase( "text/xml" ) )
    so sending xml from other tools that send contentType
    "text/xml;encoding=UTF-8" or some such, like soap tools, would mean no XML was seen.
    Is the proper source available for XSQL?

  • What is RFC for "Content-Type: application/HTTP-Kerberos-session-enc"

    Does anybody know how to process HTTP request with content type "Content-Type: application/HTTP-Kerberos-session-enc" ?
    I cannot decode HTTP request:
    -- Encrypted Boundary
         Content-Type: application/HTTP-Kerberos-session-encrypted
         OriginalContent: type=application/soap+xml;charset=UTF-16;Length=1624
    -- Encrypted Boundary
         Content-Type: application/octet-stream
    <octet-stream>-- Encrypted Boundary
    Where <octet-stream> starts with four bytes [47, 0, 0, 0]
    other bytes from <octet-stream> I am trying to decode "context.unwrap()" method ("context" was created on previous request):
                                            GSSHeader gssHeader = new GSSHeader(new ByteArrayInputStream(content));
                                            log.debug("Incoming warped content length: " + content.length);
                                            log.debug("Incoming GSS header OID: " + gssHeader.getOid());
                                            log.debug("Incoming GSS header length: " + gssHeader.getLength());
                                            log.debug("Incoming GSS header MechTokenLength: " + gssHeader.getMechTokenLength());
                                       byte[] newBytes = context.unwrap(content, 0, content.length, msgProp);
    "content" - byte array which was created from <octet-stream> without first four bytes (without [47, 0, 0, 0]).
    "gssHeader" is created correctly because in debug log I see:
    Incoming warped content length: 1671
    Incoming GSS header OID: 1.2.840.113554.1.2.2
    Incoming GSS header length: 15
    Incoming GSS header MechTokenLength: 1656
    but on "unwrap" operation I've got exception:
    GSSException: Defective token detected (Mechanism level: Invalid padding on Wrap Token)
         at sun.security.jgss.krb5.CipherHelper.arcFourDecrypt(CipherHelper.java:1226)
         at sun.security.jgss.krb5.CipherHelper.decryptData(CipherHelper.java:532)
         at sun.security.jgss.krb5.WrapToken.getDataFromBuffer(WrapToken.java:230)
         at sun.security.jgss.krb5.WrapToken.getData(WrapToken.java:195)
         at sun.security.jgss.krb5.WrapToken.getData(WrapToken.java:168)
         at sun.security.jgss.krb5.Krb5Context.unwrap(Krb5Context.java:941)
         at sun.security.jgss.GSSContextImpl.unwrap(GSSContextImpl.java:384)
         at com.myproject.ws_management.WSServer$MyHandler.handle(WSServer.java:361)
         at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:65)
         at sun.net.httpserver.AuthFilter.doFilter(AuthFilter.java:65)
         at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:68)
         at sun.net.httpserver.ServerImpl$Exchange$LinkHandler.handle(ServerImpl.java:552)
         at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:65)
         at sun.net.httpserver.ServerImpl$Exchange.run(ServerImpl.java:524)
         at sun.net.httpserver.ServerImpl$DefaultExecutor.execute(ServerImpl.java:119)
         at sun.net.httpserver.ServerImpl$Dispatcher.handle(ServerImpl.java:349)
         at sun.net.httpserver.ServerImpl$Dispatcher.run(ServerImpl.java:321)
         at java.lang.Thread.run(Thread.java:619)
    KeyTab instance already exists

    It looks like [47, 0, 0, 0] (hex [2F, 0, 0, 0]) is cipher suite, but on http://www.iana.org/assignments/tls-parameters
    I fount that it is:
    0x00,0x2F TLS_RSA_WITH_AES_128_CBC_SHA [RFC3268]
    So... what does this bytes can mean ?

  • MiMe type application plug in

    When i open the page i get this error:"The page “ONE - Israel's Sports Portal” has content of MIME type “application/x-oleobject”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed."
    How do i get the plug in????

    They're using an ActiveX Control. This will only work with IE.

  • Trouble shooting- MIME type "application/x-shockwave-flash"

    I am experincing a problem with watching youtube videos. This problem is exactly like Subtitlemewrong's problem which stated...
    "I received only the December '07 update of Quicktime (7.4) and Security Update (2007-009 1.1). That's it. And then my life went to shambles and flash content no longer displays on the web!"...
    "A website with flash content won't load, instead I get a block icon with a question mark and a message saying, "The page "Page Title X" has content of MIME type "application/x-shockwave-flash". Because you don't have a plug-in installed for this MIME type, the content can't be displayed." Sometimes I get directed to the Adobe site for Flash, which I'll download. But that doesn't do anything either."
    I tried the solution that was given by Klaus1 and it didn't work. I uninstalled using http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2
    Then I tried to install using http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash. I clicked on powerpc -based mac and started to install and recieved taht same message that I didn't have the plug-in installed this MIME type.
    Thanks for you help.

    Yeah, I already tried it under a different account. Unfortunately the new account had the same problem. I appreciate the suggestion. My only logical guess is that the new update to quicktime doesn't mix with 10.3 Panther. I am planning on upgrading to Leopard next week after I get my paycheck. Who knows, maybe those guys will know how to fix it, but so far...no luck. Thanks.

  • Business Rules in financial type application

    Hello!
    Is it possible to use business rules (validations) in financial type application? If it is possible please what the right parameters for "run_program validation" are.
    Thank you, in advance.

    Answered myself.

  • Content-Type=application/x-www-form-urlencoded with UTF-8  data which servlet fails to interpret correctly .

    My Environment is Weblogic 6.1 SP2 on WIN2K.
    I have an HTTP client sending an HTTP request with
    Content-Type=application/x-www-form-urlencoded
    the data in HTTP request is in UTF-8. Note that HTTP client does not specify charset=UTF-8
    as part of the Content-Type.
    I have a servlet "VosXmlEvents" processing this HTTP request.
    The HTTP request contains data like &#8220;Zoë&#8221; which the servlet below
    interprets as &#8220;Zoë&#8221; causing me to think that my deployment settings
    might be wrong.
    My Deployment settings:
    In weblogic.xml deployment descriptor I have specified following:
    <charset-params>
    <!-- I specified this so that I can tell to weblogic that HTTP request data is
    UTF-8 so weblogic can successfully convert it to ISO-8859-1 as per Java servlet
    spec.-->
    <input-charset>
    <resource-path>/vos/events/xml/*</resource-path>
    <!-- I tried both UTF8 and UTF-8 and got same results-->
    <java-charset-name>UTF8</java-charset-name>
    </input-charset>
    <!-- I specified the the settings below just to be on the safe side, as I have
    seen java documentation, newsgroups etc. using slightly different, names for the
    same char encoding/canonical names . Java uses MIME preferred names,I think I
    dont have to do this but I hope specifying these should not do any harm either,
    am I correct in assuming it? (see reference 1 and 2. below for details)-->
    <charset-mapping>
    <iana-charset-name>ISO_8859-1:1987</iana-charset-name>
    <java-charset-name>ISO-8859-1</java-charset-name>
    </charset-mapping>
    <charset-mapping>
    <iana-charset-name>ISO_8859-1:1987</iana-charset-name>
    <java-charset-name>ISO8859_1</java-charset-name>
    </charset-mapping>
    <charset-mapping>
    <iana-charset-name>UTF-8</iana-charset-name>
    <java-charset-name>UTF-8</java-charset-name>
    </charset-mapping>
    <charset-mapping>
    <iana-charset-name>UTF-8</iana-charset-name>
    <java-charset-name>UTF8</java-charset-name>
    </charset-mapping>
    </charset-params>
    My web.xml has:
    <servlet>
    <servlet-name>VosXmlEvents</servlet-name>
    <servlet-class>some class name</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>VosXmlEvents</servlet-name>
    <url-pattern>/vos/events/xml/*</url-pattern>
    </servlet-mapping>
    According to Servlet spec. 2.3 sec. SRV.4.9 Request data encoding, cut pasting
    from spec below:
    "Currently, many browsers do not send a char encoding qualifier with the Content-Type
    header, leaving open the determination of the character encoding for reading HTTP
    requests. The default encoding of a request the container uses to create the request
    reader and parse POST data must be &#8220;ISO-8859-1&#8221;, if none has been
    specified by the client request. However, in order to indicate to the developer
    in this case the failure of the client to send a character encoding, the container
    returns null from the getCharacterEncoding method.
    If the client hasn&#8217;t set character encoding and the request data is encoded
    with a different encoding than the default as described above, breakage can occur.
    To remedy this situation, a new method setCharacterEncoding(String enc) has been
    added to the ServletRequest interface. Developers can override the
    character encoding supplied by the container by calling this method. It must be
    called prior to parsing any post data or reading any input from the request. Calling
    this method once data has been read will not affect the encoding."
    Q1. Should not <input-charset> related settings in weblogic.xml for a servlet
    helps container actually do some thing like setCharacterEncoding(String enc) on
    HTTP Request before it call the servlet?
    Q2. If not then that would mean I have to programatically call setCharacterEncoding(String
    enc)to correctly interpret my HTTP Request?
    Q3. If the answer to Q1 is "yes" then I will assume that getInputStream() or getReader()
    methods on the HttpServletRequest will give the chacter in the client encoded
    format which in this case is UTF-8, i.e I will get "Zoë" as in this example. Am
    I correct here?
    Reference:
    1. http://edocs.bea.com/wls/docs70/webapp/components.html#139932
    2. http://java.sun.com/j2se/1.3/docs/guide/intl/encoding.doc.html

    Stefan,
    Thanks for the information. I have the following question then.
    The Webserver I am interacting with does not recognize user and password provided in the channel. It accepts user and pwd in payload and in application/x-www-form-urlencoded  content type only.
    Sample Raw Post that server server requires looks like this
    User=yourname&Password=yourpassword&INPUT_XML=%3C%3Fxmlversion%3D%221.0%22standalone%3D%22no%22%3F%3E%3CDELIVERY%3E%3CMESSAGE%3E%0D%0A++++%3CDESTINATION_ADDR%3E%2B447900570205%3C%2FDESTINATION_ADDR%3E%%3C%2FMESSAGE%3E%0D%0A%0D%0A%3C%2FDELIVERY%3E%
    What i have done is that constructed the post manually in Java code in un encoded form and expected the HTTP Adapter to do the encoding. Having done this, the HTTP Server is able to scuccessfully parse the xml except for & and < , > chars which err out as invalid XML.
    Is there an elegant way of doing above scenario using XML post and standard HTTP Adapter.
    Best Regards,
    Sudharshan N A

  • Content of MIME type "application/x-shockwave-flash"

    Hey, im not that advanced with this stuff but I keep on getting this message recently and I cannot remember any recent major downloads/updates:
    This page has content of MIME type “application/x-shockwave-flash”, but you don’t have a plug-in installed for this MIME type.
    This happens on Youtube, facebook and stuff like that. Also, Ive noticed that apple trailers using quicktime isnt working. I have installed the new plugins for flashplayer and Quicktime but still no result.
    Any help PLEASE? I hate using firefox coz i love safari!
    Cheers!
    Pratik

    Have you by any chance moved Safari from its proper place in the Applications Folder to a sub-folder, or renamed it?
    Try this routine:
    Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417

  • Import /sql/tracker.sql as File Type = Application Export

    Im trying to download the tracker application and dont understand this instruction
    Import /sql/tracker.sql as File Type = Application Export
    Does any one know what I should do.
    many thanks

    Im trying to download the tracker application and dont understand this instruction
    Import /sql/tracker.sql as File Type = Application Export
    Does any one know what I should do.
    many thanks

  • MIME type &#147;application/x-mplayer2&#148;

    One URL I visit pops up a warning that I don't have a "MIME type 'application/x-mplayer2' plug-in installed, so I can't use certain portions of the site. Where can I find such a plug-in? Is it a popular plug-in that is used by other sites?

    I've never come across this plugin before - doubt it's widely used - but it might refer to MPlayer OS X, MPlayer Plug-in or Windows Media, I'm not sure. Try out MPlayer Plug-in first.
    Yang

Maybe you are looking for

  • How to Open PDF in the browser...JSF

    String strUrl = http://..../xxxxxe43cb072378947fe8c1b7bcc7201691a.pdf FacesContext faces = FacesContext.getCurrentInstance(); ExternalContext context = faces.getExternalContext(); HttpServletResponse response = (HttpServletResponse)context.getRespons

  • Focusing a field/column in the new row of adf table

    Hi all,      I am using JDeveloper 11.1.2.4.0. and UI-Shell Template in Main application and sub applications are added to this master application as ADF library jar files. Application is working fine. I am trying to focus to make focus on a column i

  • Link on a flash banner

    Hello ! As a beginner at Flash, I encounter my first difficulty ... I want to create a banner, linked on all its surface to an Url. I created a transparent button on a special layer a the top, and converted it as a button, before applying it the "cli

  • Would like to use Quicktime to open Realplayer .rm files.

    I was curious if anybody knew of a Plug-in that would allow Realplayer .rm files to be played on Quicktime. I'd rather not use Realplayer if don't have to. Another option would be if anybody knows of a converter similar to Flip-4-Mac that would allow

  • WANT TO FIX COMPUTER SO IT WILL LET ME LOG OFF

    PLEASE I'VE COMPLETELY MESSED UP COMPUTER! I CANT EVEN LOG/SHUT OFF COMPUTER!!! I ADDED/REMOVED/INSTALLED/UNINSTALLED! I CANT SHUT COMPUTER DOWN!!????????????????????