Pharma specific fields (group and subgroup)

Hallo,
I have problems with specific Pharma fields (group and subgroup) in CRM Mobile 2007 SP02.
Some business partners have group and subgroup in pharmaceuticals bookmark in transaction BP. But in mobile solution I have these business partners without group and subgroup. The combobox for group and subgroup is empty too.
In table SMOKNA1 (in CRM server and in CRM mobile are columns KVCGROUP and KVCSGROUP empty). I tried make initial load for object CRM_DNL_BPGROUP, but all is the same.
Have anyone suggestion what I made wrong? Which subscription I need for these attributes.
Thank you for your help.
With regards,
Jiri Halmich

Hi,
the issue with the customizing data is solved as Jiri already mentioned above.
Btw: After synchronizing an adapter object you don't need to run an extract as this is done automatically by the system - and only for the changes (delta sync), not for the complete subscription...
Concerning the missing data in smokna1: For my understanding this is a standard error. You should create an OSS message for that.
If you prefer to solve it at your own you would have to do some coding in the Mobile bridge. Using the EEWB dosn't help as the fields are already there in the tables and BDocs.
Of course you also can chose a "quick & dirty" solution: Create a new CDB table, containing only the sfakna1 and the both BP group fields, define an adapter object which synchronizes the both fields from BUT000 to this table and calculates the sfakna1 field by keygen. Run this adapter object by using a batch job at least once a day. Create a new sBDoc and qBDoc based on this table. Do some small coding in BOL to retrieve the both properties from the new CDB table into the both BOCAPGEN properties.
Regards,
Wolfhard

Similar Messages

Difference between the Field Group and Internal Table.

Hi all,
Can anybody tell me the difference between the Field group and Internal table and when they will used?
Thanks,
Sriram.

Hi
Internal Tables: They are used to store record type data in tabular form temporarily in ABAP programming. Or we can say, it stores multiple lines of records for temporary use in ABAP programming.
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
Regards
Ashish

Add field group and Logical field group for ANLU

Hi all,
On my project, the table ANLU is containing many specifics fields.
I would like to know how I could add a field group and logical field group corresponding to this specifics fields on ANLU, in order to be taking into account on my validation rule ?
On the GGB0, Asset Accounting / master data, the check point includes the ANLU on the table fields. But, once my rule created, when I want to activate it on the TCODE OACV, the field group proposed don't include data from ANLU (only ANLA and ANLB)
I found out the TCODE OAVM listing all different field linked to the field group. Does it possible to manage this view ?
please help me !!

Hi Rob,
Can you tell me how can i solve this issue.
Runtime Errors         MOVE_TO_LIT_NOTALLOWED
Date and Time          09/11/2007 18:11:01
Short text
    Assignment error: A constant was meant to be overwritten.
Error analysis
    The field "<S1>" is to be assigned a new value although the field
    is partially or entirely protected against modifications.
    The following are protected against changes:
    - Character literals or numeric literals
    - Constants (CONSTANTS)
    - Parameters of the category IMPORTING REFERENCE for functions and
    methods
    - Untyped field symbols not yet assigned a field using ASSIGN
    - TABLES parameters if the actual parameter is protected against changes
    - USING reference parameters and CHANGING parameters for FORMs, if the
    actual parameter is protected against changes and
    - Accesses using field symbols if the field assigned using ASSIGN is
    protected (or partially protected, e.g. key components of an internal
    table with the type SORTED or HASHED TABLE) against changes
    - Accesses using references, if the field bound to the reference is
    protected (or partially protected) against changes
    - External write accesses to READ-ONLY attributes,
    - Content of a shared object area instance accessed using a shared lock
    (ATTACH_FOR_READ).
Thanks
Ashraf

What's def of field group and intermediate data set

what's def of field group and intermediate data set

The drawing panel cannot draw the figures, what's
wrong?You can't have written this much code and then suddenly detected it doesn't work at all. You must now restart from the point where you had a working program. Then you add code is small increments and see to it that it works in each step and you understand why it works. This method is called stepwise refinement and it does wonders.

Propose or change automatically, Employee Group and Subgroup.

Dear all, when executing an exit Action, thru transaction PA40, what's the best way to propose by default/change automatically, the employee group/subgroup?
Example: I want to change the employee group from '1' (Active) to '2' (Inactive), but the fields are disabled for input.
Do i have to do this thru the enhancement "PBAS001", or is there any way to do this thru configuration?
Sincerely,
Hugo Ferreira

I was searching for something in SDN and got this post.
Though it's a very late reply, whatever Sreenu has told is correct.
In the table T529A, you can define the employment status wehther it has to be active, withdrawn or inactive.
This field is input disabled in the action and the values will be defaulted from the configuration.
But Changing the employee group and employee subgroup , we can't change. If that is what is required, the values might depend on the configuration.
And even through some enhancement also we can't change. because, for IT0000 no enhancement are available. Even though the fields are from IT0001, I doubt it can be changed through enhancemnet.
If you have already achieved it through enhancemnet, please let us know.
Thanks,
RSS.

Item grouping into groups and subgroups

In case there are a lot of items in Business One, companies usually group these by item groups. In some cases when there are thousands of items, these are further on divided into subgroups by using UDFs. Then when you are making, say a sales order, you first look for the item group and then for the subgroup. This is where it gets tricky. You can only display the code when browsing for subgroups. It is not possible to display the value within the description field (I do not know how to do it). The code lenght is limited to 8 characters and hence makes it difficult to write a proper description for this subgroup. Is there any way to overcome this issue?

Hello,
thank you Gordon and Deepak for your efforts. First level grouping (B1 standard) by item groups is working fine, the second level just displays codes. The issue is that the value within udf-field on item master data card (on the right-hand side) does display correctly. However when I search for this item, say when making a sales order, I will just get the value, not the description. It makes no difference if I select it in the document settings to display as visible.
Codes and description for this udf-field are as follows:
Code Description
100    Roses
110    Tulips
120    Lilies
Now when I sort this field by subgroup value, it only displays 100, 110 etc.
All help is appreciated.
Thanks,
Samuli Ajo

Creating Employee Group and subgroup in OM

Dear Viewers,
I am new in this SAP, I have started learning SAP HR / HCM. Presently I am learning OM and creating Organisational Structure.
Can anyone help me in giving examples to create employee group and employee subgroup categories.
Thanks & Regards,
Soujanyah

HI Swapnil,
Thank you for the link.
I have got a sample by searching in google
[http://www.laccd.edu/hr/Documents/HRGuide_H-300_EmployeeSub-Group.pdf]
Can I get some other samples please as specified in that table as EG and ESG

Problem with Group and SubGroup

Hi All,
I have one problem in sql statement. I got two tables, PARTY and SUBGROUP.
<<party>>
party     group     subgroup;
WG009     xx     zzz
<<subgroup>>
party     group     subgroup;
WG009     xx     yy
I have to write a query which gives the result that 'zzz' is not in subgroup table where xx=xx from subgroup.group and party.group. I have written the statement like this, but its not working properly becuase its returning all the records from subgroup.
SELECT P_CODE, SG_CAT, P_CAT, P_SUB_CAT, SG_CODE FROM PARTY, SUB_GROUP WHERE P_CAT=SG_CAT AND SG_CODE != P_SUB_CAT AND P_CODE='WG009';
P_CODE SG_CAT P_CAT P_SUB_CAT SG_CODE
WG009 DWD DWD ANIL SHAH GADAGE
WG009 DWD DWD ANIL SHAH JAIN FAMILY
WG009 DWD DWD ANIL SHAH DEDHIA
Is any body have Idea.
SKM

select party,group,subgroup from party
minus
select party,group,subgroup from subgroup;

Sort+logical database using field group and extract

Hi Folks,
I have a program which is using Logical database concept and creating a file on application server as below.
SORT BY
    reguh-zbukr                        "Zahlender Buchungskreis
    reguh-rzawe                        "Payment method
    reguh-ubnks                        "Bankland unserer Bank
    reguh-ubnky                        "Bankkey zur Übersortierung
    reguh-ubnkl                        "Bankleitzahl unserer Bank
    reguh-ubknt                        "Kontonummer bei unserer Bank
    payment_form                       "Brazil: CC, DOC or OP
    regud-xeinz                        "X - Lastschrift
    reguh-zbnks                        "Bankland Zahlungsempfänger
    reguh-zbnky                        "Bankkey zur Übersortierung
    reguh-zbnkl                        "Bankleitzahl Zahlungsempfänger
    reguh-zbnkn                        "Bank-Ktonummer Zahlungsempfänger
    reguh-lifnr                        "Kreditorennummer
    reguh-kunnr                        "Debitorennummer
    reguh-empfg                        "Zahlungsempfänger CPD
    reguh-vblnr                        "Zahlungsbelegnummer
    regup-belnr.
LOOP.
AT NEW reguh-rzawe
PERFORM store_on_file USING j_1bh1.
ENDAT
AT NEW reguh-ubnkl
PERFORM store_on_file USING j_1bh2.
ENDAT
AT NEW reguh-ubnkt
PERFORM store_on_file USING j_1bh2.
ENDAT
AT NEW VBLNR
PERFORM store_on_file USING j_1bh3.
AT DATEN
PERFORM store_on_file USING j_1bh4.
ENDAT.
ENDLOOP.
FORM store_on_file USING daten.
IF hlp_temse CA par_dtyp.            "Temse
    PERFORM temse_schreiben USING daten.
ELSE.
    TRANSFER daten TO g_name.
ENDIF.
ENDFORM.
Is Sorting concept different when it comes to logical databases and field groups ?
I had added a new field in the sort reguh-rzawe.I think due to that it is getting into AT NEW UBNKL and AT NEW UBKNT even though those details are same for the payment methods in the payment run.Even though the house bank number and account number is same for all the payment methods it is getting into AT NEW UBNKL and AT NEW UBKNT for every new payment method in the iteration.
vblnr-1
rzawe- A
ubnkl-12345
ubnkt-45678
vblnr-2
rzawe- A
ubnkl-12345
ubnkt-45678
vblnr-3
rzawe- B
ubnkl-12345
ubnkt-45678
vblnr-4
rzawe- B
ubnkl-12345
ubnkt-45678
Can anyone here throw some light on this.
Thanks,
K.Kiran.

Read the documentation for the at-new process. As I recall the at-new considers the field named, and all the fields to the left of that in the table. With that in mind, look at how your logic will work. This could result in more, or fewer, breaks than intended(fewer if, for instance, a field to the left was deleted).

Problem with Field group and layout generation

Hi,
Previously we customized the field group OPP_DISPLAY_SEARCH_RESULT_50 using transaction CRMC_BLUEPRINT_C ( for accplication CRMD_BUS2000111) for our own custom view and the whole thing worked smoothly. However while changing the layout (adding and taking out some field) I came across issues. I am pretty familiar with PCUI and have done some work on this previously. However this time generating and regenerating this field group ( AFTER some changes) has no effect when the PCUI gets executed with that particular view...
I have used crmc_pcuitools to confirm that the field group in question is the one mentioned aboveand since its not contained in any reference grp, generating the layout for only this field group should be sufficient. However this generation doesn't take effect at all when the PCUI IS EXECUTED. After the generation I made sure that the table CRMC_LAYOUTC does contain generated layout entries for the respective views etc..
I have also created a test view and completed the similar customization and it didn't work as well. We are at CRM version 5 with SP6. Previously ( around 7,8 month back) the whole procedure worked fine..
Am I missing anything..
Thanks

Hello,
What are you trying to modify?
If it is the search result list, it should be OPP_DISPLAY_SEARCH_RESULT_50 that you have to regenerate with the correct view and field group variant.
If it is the information tab, it s OPP_OVERVIEW_50 that needs to be regenerate.
Regards,
Frederic

Need scripts for fetching groups and subgroups info , script for del users

Hi ,
I need a script or macro which will fetch list of groups and sub groups triend forums download did not fine one.
I need another script which will delete listed users there is a macro in forums but it doesn't suit my rquirement.
Any one have these scripts handy with you please help me with that,
Regards,
Neo.

Hi Braham,
Thanks for your quick reply.
Are we able to do this on two stage method
1. grab the security groups from the share paths
if can grab the share path from a separate txt file than copying it to the <your path> location
so i can modify the txt file
once run the script
if can the output like below to a CSV file
\\servername\foldermain\folder1group 1group 2group 3\\servername\foldermain\folder2group 1group 2group 3then i know which groups belongs to which share paththen i can remove the duplicate groups and keep the common groups to grab the users belongs to itso with the second script same as the first copy the security groups to a txt file and the out put as below.what I needs is the users full name and the samaccount name ( user id )group 1user1user2user3
group 2user1user2user3looking forward your help on thisThank you.Thilo

What is Field Grouping and how we do this in SAP CRM SYSTEM?

Hi Champs,
I shall be greatful if you guys can provide me the solution as I am a begineer in this stream.
Regards,
Conte

Hi Conte,
If you are talking about field groupings for a business partner in CRM then it is used
to define which fields based on your requirement can be made as an
1)Require an entry (required entry)
2) Are ready for input (optional entry)
3) Are displayed (display)
4)Are hidden (hide),
For example: when you are creating a customer you want the conatact number of the Customer and you want to make it mandatory, this can be done using field groupings.
you can follow this path to customize-
spro>img>cross application components>SAP Business Partner>Business Partner>Basic settings>Field groupings.
It gives 4 options to configure the fields-
1)configure field attributes as per client
2)configure field attributes as per BP role
3)configure field attributes as per Activity
4)configure field attributes as per BP type.
Hope this helps.
Regards,
Prathiba

Grouping and subgrouping

Hi Experts,
I am looking for select which can give me results as below. I am fairly new and tried
Data
=====
select 'g1' group_key,'p1' prod,'pd1' prod_dsc,'m1' month ,1 sales from dual
union all
select 'g1','p2','pd2','m1',2 from dual
union all
select 'g1','p3','pd3','m2',3 from dual
union all
select 'g2','p4','pd4','m1',4 from dual
union all
select 'g2','p5','pd5','m2',5 from dual
union all
select 'g3','p6','pd6','m2',6 from dual
ouput
=====
g1
p3
pd3
m2
6
p3
pd3
m2
3
p2
pd2
m1
2
p1
pd1
m1
1
g2
p5
pd5
m2
9
g2
p5
pd5
m2
5
p4
pd4
m1
4
g3
p6
pd6
m2
6
g3
p6
pd6
m2
6
So basically prod,prod dsc and month is not known for the group but it will be taken from the highest sales within the group. Any help is highly appreciated.
Thanks,

with order by :
WITH T AS(
select 'g1' group_key,'p1' prod,'pd1' prod_dsc,'m1' month ,1 sales from dual
union all
select 'g1','p2','pd2','m1',2 from dual
union all
select 'g1','p3','pd3','m2',3 from dual
union all
select 'g3','p6','pd6','m2',6 from dual
union all
select 'g2','p4','pd4','m1',4 from dual
union all
select 'g2','p5','pd5','m2',5 from dual
select decode(grp_id,0,null,group_key) group_key,
       prod,
       prod_dsc,
       mnth,
       sm_sales,
       row_number() over (partition by group_key order by decode(grp_id,0,null,group_key)) o
from(
SELECT t.group_key,
       max(t.prod) keep (dense_rank first order by t.sales desc) prod,
       max(t.prod_dsc) keep (dense_rank first order by t.sales desc) prod_dsc,
       max(t.month) keep (dense_rank first order by t.sales desc) mnth,
       sum(t.sales) sm_sales,
       GROUPING(t.group_key) grp,
       GROUPING_ID (t.group_key,t.prod) grp_id
FROM T
group by rollup(t.group_key,t.prod)
where grp = 0
GROUP_KEY
PROD
PROD_DSC
MNTH
SM_SALES
O
g1
p3
pd3
m2
6
1
p1
pd1
m1
1
2
p2
pd2
m1
2
3
p3
pd3
m2
3
4
g2
p5
pd5
m2
9
1
p5
pd5
m2
5
2
p4
pd4
m1
4
3
g3
p6
pd6
m2
6
1
p6
pd6
m2
6
2
Ramin Hashimzade

Issue in uploading Employee Group and subgroup in LSMW

Hi Experts,
I`m using LSMW to upload IT 1013 data thru transaction PP01. When i run the LSMW in forground mode , then everything seems to work fine. But when run in background mode, I find that the records are not getting uploaded and its giving me some error like "Runtime error RAISE_EXCEPTION has occurred".
Any input regarding this would be helpful and appreciateable.
Regards,
Farhana

Hi Anatha,
I tried PP02 and it also shows me the same error and also the my data files has only 4 records. I`m using only 4 records for testing, so it could not be a mass data load issue too.
Regards,
Farhana.

Fields symbols and field groups

what are field symbols and field groups?
Regards,
sravanthi

Difference between Field symbols and Field groups
what are field groups and field symbols ...

Pharma specific fields (group and subgroup)

Similar Messages

Maybe you are looking for