Philadelphia VFP User Group--Tuesday, April 14--"Document Management within Visual FoxPro"
The Philadelphia VFP User Group meets Tuesday, April 14 at 7:00 PM in room 104, DeVry University, 1140 Virginia Drive, Fort Washington, PA. As usual, feel free to bring some dinner and come as early as 6:30 PM.
This month, member Jim Connolly will speak on “Document Management within Visual FoxPro.”
Abstract: I created programs that will create an electronic filing system. The programs read the bar codes from the invoices and files them in electronic storage. This allows the end user to view the documents with a single click in the app. I will show the
class how to setup the bar code reader and to accept individual scans for easy access. There are some recommended programs that will assist in the process. I will present them along with the Fox Pro program.
We need speakers for upcoming meetings. Please let Jim ([email protected]) know if you have something to share with the group.
http://vfpphilly.blogspot.com/
The Philadelphia VFP User Group meets Tuesday, April 14 at 7:00 PM in room 104, DeVry University, 1140 Virginia Drive, Fort Washington, PA. As usual, feel free to bring some dinner and come as early as 6:30 PM.
This month, member Jim Connolly will speak on “Document Management within Visual FoxPro.”
Abstract: I created programs that will create an electronic filing system. The programs read the bar codes from the invoices and files them in electronic storage. This allows the end user to view the documents with a single click in the app. I will show the
class how to setup the bar code reader and to accept individual scans for easy access. There are some recommended programs that will assist in the process. I will present them along with the Fox Pro program.
We need speakers for upcoming meetings. Please let Jim ([email protected]) know if you have something to share with the group.
http://vfpphilly.blogspot.com/
Similar Messages
-
Hi,
are there any sources which are giving insights and descriptions on document management within SAP PM? Does anybody have experiences with document management within PM?
Best regards,
DennisDennis,
You can use the standard Document Management System (DMS) for this purpose.
See [here|http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm] and [here|http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/d549fc4ab311d189740000e8322d00/frameset.htm] for more info.
PeteA
[www.pjas.com] -
8th Oracle Life Sciences User Group Meeting, April 30, 2007, Boston, MA
8th International Oracle Life Sciences User Group Meeting
World Trade Center, Boston, MA, USA
April 30, 2007
Oracle Life Science User Group
The Oracle Life Sciences User Group (OLSUG) represents a worldwide association of people who share a vested interest in the successful deployment and use of Oracle products within the life sciences industry. The 8th International OLSUG meeting is designed to accelerate the success of users of Oracle products by providing a forum for sharing useful information and best practices, discovering novel and innovative practices, and exposing issues and limitations concerning Oracle products.
Meeting Format
The meeting will consist of exciting keynote presentations from industry renowned individuals. There will be workshops and discussions that are focused on topics of great interest, for example, the Semantic Web and database analytics. Oracle partners will be describing their latest offerings. In addition, there will be many presentations that have been selected to be of interest to scientists, application developers, architects and DBAs.
Submission Process
To be considered for a presentation, an abstract (max. 600 words) needs to be submitted by January 12, 2007 to OLSUG mailto: [email protected]
Please note, by submitting an abstract, you are granting OLSUG permission to post the abstract and presentation on the OLSUG Web site.
Important Dates
Last date for submission of abstracts: January 12, 2007
Presentation notification: February 1, 2007
8th International OLSUG Meeting: April 30, 2007
Topics of Interest as Related to Life Science
Distributed Data Access: Gateways, External Tables & Generic Connectivity.
Data Integration: Relational, XML & Semantic Web.
Supporting Many Data Types: Text, Images, XML & RDF.
Managing Lots of Data: Partitioning, RAC, ASM, Streams, Data Guard & Grid.
Enabling Secure Collaboration: Collaboration Suite, Portal & Security.
Finding Patterns and Insights: Data Mining, Statistics & Text Mining.
Application Development: Fusion Middleware, JDeveloper & Application Express.
Database Performance: Tuning tips.
Registration
Stay tuned for information about registration.
Conference Program Co-Chairs
Charlie Berger, Oracle, [email protected]
Mark Forster, Syngenta, [email protected]
Carolyn Hamm, Walter Reed Medical Center, [email protected]
Vijay Pillai, Oracle, [email protected]
Kevin Prime, MDL, [email protected]
Susie Stephens, Oracle, [email protected]
Henri Tuthill, Astrazeneca, [email protected]</nowiki>
Meeting Sponsor:
Bio-IT
http://www.bio-itworldcongress.com/index.aspmaybe OP want to extract all numbers from his inbox using regular expressions?
-
BPC 7.5 - Domain User Group Not Work - Configuration Server Manager
Hi Guys,
I install BPC 7.5 from NW. From the PC client only work ok with the same user OWNER the BPC .NET. In Server Manger -> Option
-> Define Systems User Group, add the follow data:
- System user group name= Domain Users
- Domain Type=Active Directory
- Domain Name = BAIRES
Is correct the Syntax? or need use the form OU=xxxx?
Thanks.Ok, thanks, and So I have other problem. I need Add User from different Domains, How configure this?
Tks -
Using Document Management within SAP
Hi,
I'm relatively new to SAP and need to have some information about using the Document Management Services within SAP. As with other ERP products there are drawbacks to allowing this functionality such as disk space concerns, upgrades, performance issues. Based on some other threads I've read about this it looks like some of the options can be disable to eliminate some of the disk space concerns.
Could anyone point me to a good document that describes Document Management Services and the benefits/drawbacks? I would also be extremely interested in personal experiences of why you would and wouldn't use it.
Thanks,
JulieHi, Julie
Purpose;
The Document Management Service (DMS) is a service of the information management infrastructure provided by the Knowledge Provider within the framework of SAP Web Application Server. The central task of the DMS is to process documents and document-like objects on the basis of application-specific content models. Only the DMS can modify document administration data and save this data in a storage medium, such as the SAP database.
Implementation Considerations;
In order to use the DMS, you need to implement some Customizing steps. For details, see the Implementation Guide (IMG) under the following path: SAP Web Application Server ® Basis Services ® Knowledge Provider ® Document Management Service. The IMG modules contain details on the individual Customizing activities.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/1a/aea9375d79fb7de10000009b38f8cf/frameset.htm
Also go through these urls for further information
DMS
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92713a46f311d189470000e829fbbd/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/bd/8063fbbc43c54e901dd7733d946198/frameset.htm
Benkaraj
??P
Edited by: benaka rajes on Jul 23, 2009 11:42 AM -
Toronto Final Cut Pro User Group Tuesday May 15th meeting
May's TOFCPUG meeting is not to be missed as we will be reviewing the National Association of Broadcasters convention that took place in Las Vegas last month.
The meeting will provide up to date information relating to developments with Final Cut Pro, associated software, related technologies and advances in the Macintosh platform. The meeting program has been designed to provide attendee with the scope of technologies shown at the conference and is of interest to anyone who produces and edits media on a professional level.
The Program Includes;
Nonya Nerd's Vlog of NAB 2007
A Presentation on NAB 2007 by Apple Canada
Interactive Panel On NAB 2007 including;
Tim Martin – FrameBlender
Terry Steyn - The DV Shop
Bob McKenzie – York University
Brad Fortner – Ryerson University
MEETING SPONSOR: Apple Canada
Meeting starts at 6:30pm on Tuesday May 15th
Rogers Communication Centre Room
Ryerson University, RCC359
80 Gould Street,
Toronto, ON
amazing raffle prizes from VASST, NATTRESS PLUGIN's, AUTOMATIC DUCK, COW MASTER SERIES, SOUND IDEAS, DIGITAL JUICE.It was in the original title. David may have edited
it to the the text later.
actually it wasn't . . . Steve pointed it out and I added it after ( he then changed his post to a smiley)
If you get a chance to go you should. They seem to be
a very active FCPUG and from what I've seen, put on a
good show.
Thanks X
BTW we will be hopfully doing another live webcast (I will post the URL here and on the TOFCPUG website when I get it tommorow around 6 PM EST.
DAVE -
Newbie: External App to Create Users/Groups
I am new to web based security, so please excuse what is probably a very simple question.
I was reading the security documentation for WLS 8.1 and it seems to me that all users/groups, etc must be administered from within the WLS console. Is it possible to create these entities from an external (i.e. custom built application)?
I have a client for whom I need to build a security solution. I am not sure they would be willing/comfortable administering security from within WLS. They may want their own custom application. Before I discuss this with them I wanted to educate myself as to the available options for doing so.
I'd like to take advantage of all the security providers that WL has, but am wondering if I can "input" the requisite data via a custom built front end.
Cheers,
AidanYou can use mbeans in your custom application
for example weblogic.management.security.authentication.UserEditorMbean (createUser method)
and so on -
Integration of CHARM and Document Management
Dear All
After a lot of time on sdn wiki and thanks to the key blogging contributors , I now have a decent understanding of how to configure CHARM
To go into more details, i would like to integrate CHARM with the Document Management within Solution MAnager
Would i be right to assume that this integration is currently today in use only by a few GXP kind of customers
But it seems the configuration of document management itself is not so difficult (eg creating document types, statuses, status schemes, signature strategy etc) The IMG has the steps described though in not great detail. Some topics are still bit specialized eg document versioning etc
I was wondering if someone who has already spent time in this area could write a SDN blog or SAP experts coudl write a wiki section
I see this as the next big improvement since everything would be out of the box and external document databases can be discarded etc
Also the workflow of informing and signing documents for clear visibility is on the same system etc
Some requirements could be
1) what could be the minimal document workflow
2) what kind of checks can be implemnet to prevent CD to move forward if a document is not in 'Approved' status
3) at what point could a QM come into picture
etc
Though the documentation is in bits and pieces, if we could have alll at one place - lets say how its done , would be very helpful
Like a Wiki or the SAP CHARM configuration guide
or like the ITSM book by Nathan Williams with illustrations :-)
Thx
ChandrakanthThis is very far from the type of integration I expect to see. Proper incident management means when a problem occurs and incident is logged into the sap service desk. If this incident requires a change it should be forwarded to the CHange Reqest Management (CHaRM). From there it should have a business impact analysis, then a system or architecture review, only then if it is approved should development be started, after the development, it goes into QA for testing. Since the business process is defined in the solman and there are test cases for this business process. It makes sense that one can use the test workbench to verify the business process, and document the testing. If there is a problem with the testing and it needs to go back to development, it should be connected to the same incident logged initially. There should not be a second problem logged. It is still part of the same incident and should be managed as such.
This question exists also for a maintenance project. Once I have an operational system and all the business process defined in the project and a change arrives into ChaRM, why canu2019t the change be done in the project like and implementation?
How can one find out the direction of this product? Does SAP have any plans to develop solman into an integrated tool or will it remain a bunch of simple tools that co-exist on the same server? -
How to add a default user group for multiple document type's?
Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
SaloniHi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram -
2006 Oracle HCM Users Group Spring Conference in Las Vegas - April 19-21
The 2006 OHUG Spring Conference will be held in Las Vegas at the Aladdin Resort & Casino April 19-21.
2006 Spring Conference Agenda includes:
- 3 Keynote Presentations by Oracle Corporation Executives
- 64 Oracle EBS Breakout Presentations,
- 64 PeopleSoft Enterprise Breakout Presentations
- 2 Panel Discussions
- Over 60 Hours of Meet the Experts for EBS
- Over 60 Hours of Meet the Experts for Enterprise
For more information about the Oracle HCM Users Group, Member Applications, and Registration for Conferences - visit the OHUG website at www.ohug.org
Oracle EBS Conference Agenda - http://ohug.org/meetings/AgendaOracleTrack.pdf
Oracle EBS Conference Abstracts - http://ohug.org/meetings/EBSAbstracts.pdf
PeopleSoft Enterprise Conference Agenda - http://ohug.org/meetings/AgendaPeopleSoftTrack.pdf
PeopleSoft Enterprise Conference Abstracts - http://ohug.org/meetings/EnterpriseAbstracts.pdf
Regards,
GregThierry,
I am curious to know about Fusion. I heard that Oracle Reports and Forms will not be used from R12 onwards. Is it so ?
And anything new that we need to improve ourselves against the Fusion Application ?
Any interesting new features for HRMS in Fusion ?
Regards
Jhansi -
Unable to save a document to another user group
This may be a basic configuration issue, but I have recently taken over the administration role for our BO 6.5 system, and have been unable to find a solution.
A user in a Prod Pwr group is trying to save a document to another Prod user group, where he is not a member. The only group that he can choose from is his own. Can this be done, or is this normal, even for Prod Pwr users? I appreciate any insights.This is the correct behaviour...a user can "publish to" only to the group to which s/he belongs.
A user on the other hand can use the "send to user" fuctionality and send his document to a user in any other group as far as s/he knows the users login id.
Hope this helps ! -
Mass creation of common folders for different user groups
Hello Experts,
We are using Portal 7.0 SP12 and we have 10 different user groups created in Portal.
Based on this group structure, we need to create two common folders in each of the user's personnel documents in KM.
Is there is any way to achieve this kind of requirement ?
Can we do mass creation of these two common folders which will be assigned to all of the groups. This needs to be done in user's personnel documents and not in Public documents.
Any help in this context would be highly appreciated. points assured.
Thanks in advance,
Anil Kumar.For every user a folder is created in userhome. One approach is to capture this folder creation event and create the folder structure you need. You need to develop a portal service which will listen to events from userhome repository.
1. Capture folder creation event for user home
2. Create the folder structure you want in this event handler
Check this documentation on how to do this.
https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/rf/client_api/rf_client_api.html
Regards,
Prasanna Krishnamurthy -
Hi, i created a new user group with some administrative rights:
Access Administration
Advanced Document Submission
Create Communities
Create Community Infrastructure
Create Folders
Create Portlets
Edit Own Profile
Then, i created a user and added to this group.
When i login with the user i created, the Administration Tab doesn't appear.
Somebody can help me please.
IT'S URGENT !!!!
ThanksI thought access administration was all that was required. Did you get it resolved. Usually these things clear themselves up with time.
-
Restrict metadata field during an update to a specific user group
Hello everyone,
I am having some trouble figuring out the best way to restrict permissions to change some metadata fields for 2 different groups of users.
I have two user groups, A and B. Group A will be checking in documents that the B group will then review for accuracy and quality. Group B will then update an optionlist field called "Status" with either "Recommended" or "Not Recommended".
This is not a workflow situation as the scope requires that all documents are immediately available for searching. I currently have a CheckIn and Search profile for the content permitting read write access to groups A and B. The "Status" field is hidden on the CheckIn page. Can anyone please suggest a good way to restrict the field "Status" on an Update page to just "B" users? Groups A and B should be able to update all fields with the exception of the B restricted "Status" field.
Thanks!
Edited by: user6750815 on Jun 2, 2010 4:11 PMHey rMac,
I understand it this way you have one profile for A and B user groups. On this profile Status field is hidden.
If this is your problem you can approach it from two places, while making the rule for hiding the Status field, use rule activation condition. Make it active only for users with Role A . This way even with single profile some of the user with Role B will be able to see the Status field.
otherwise you can put similar code in Restrict Personalization Link where in you make this hidden field editable and compulsory for Users in B.
cheers,
sapan -
How to change user group of a query (sq01)
Hi,
I'm working with SAP Queries (SQ01) and I don't know how can I change the user group assignation of a query. We did only one user group for all users and queries and know in order to arrange it a bit we've created three user groups.
We know how to assign users to new user groups but for each query of the old group we neet to move it to one of the new user groups, how could we do this?
thanks in advanceHi
pls go through these links
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
Maybe you are looking for
-
So I was given a G5 from a client who couldn't pay their studio bill. It was a win win situation as he no longer needed it anymore, and I needed a spare Mac to do some admin work on. The Mac has 2x HD's a 1GB RAM I bought a retail version of 10.5, an
-
Receiver Determination steps for BPM scenario
Hi Experts, Scenario : SOAP -> Calling different webservices 1. SOAP Client Request 2. Call the Initial webserive to get the unique Id. No need to pass any request to call this webservice, but it will give the response. 3. Take the Initial websrevice
-
Hi all When I try to make connection through this string jdbc:oracle:thin:@localhost:1521:orcl , It failed to connect to the database. I am trying to connect to database through obiee 11.1.1.5 by jdbc connectivity. Please tell me its solution..... Th
-
To get Code Inspector Errors into an internal table
Friends, My requirement is to report if there exists any Error, warning or information in the Code Inspector & SLIN. I need to include these values in a report. For this i will have to get these values into my program. Any idea how can this be achiev
-
This is what i do in my server to see the tkprof -- setting user_dump_dest alter system set user_dump_dest="/home/oracle/trace"; alter session set tracefile_identifier ="trace1"; ALTER SESSION SET SQL_TRACE = TRUE; tkprof /home/oracle/trace/ora_16095