Phone not working for the 5th time

I am so happy with my fios service.  Now for the 5th time our phone does not work.  We regularly cant recive calls, and sometimes cant call out.  Each time we call (with cell) they say nothing is wrong and will send a tech out days later and an hour before the tech is supposed to show up, it suddenly starts working again.  A week later it stops working, and we go through the same ordeal.  I wonder who they cut off, whent hey turn ours on, and who gets service when they cut ours off.  Its like they play musical chairs with our phone service.  Sometimes we get incomming calls, sometimes outgoing, but hardly ever both.  **bleep**?  Now waiting another 8 days for them to send someout out because right now we dont even have a ring tone.  Please just fix the problem, or stop charging us the $30 for the service.  What a sham.  Oh, and to top it all off,t his week, Verizon Wireless also assigned my wifes account/phone number to someone elses contract.  She has had the number for over 10 years, I just bought her a new iPhone (full price $900) and when we went the store a man by the name of Carlos told us to pound sand.  He had given the line to someone else and the only way he would fix it is if we returned the phone we bought from Verizon online, and bought a phone in his store!!!  Can you believe it.  Carlos would not give her line back unless she bought a phone in his store. 

Hi mikalsan,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

  • HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

    The warranty is only good in the U.S.
    You woulod have to send it to someone in the U.S.  They could take it in and if it is defective, then it would be replaced.

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • Updated to iOS 7, when my phone came on for the first time I could see I had 2 new viber messages.  When I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone.

    Hi,
    I have only just upgraded to iOS 7 on my iPhone 4 and am having a  problem with Viber. When my phone came on for the first time after the update I could see I had 2 new viber messages, when I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone...
    I still have an itunes backup of my phone just before the update, I restored it to this backup, followed the same process and now viber will not even work (the access code wont sms to me and the phone call option for recieving this code also come up with some error about not being able to do this at this time).
    I have been able to access viber using another phone number (I have two sims which I use as I am currently overseas in south korea, my referenced australian sim has worked previously on viber overseas and I definently do have roaming on) but again I have no message history.
    So to questions:
    1) Why is my activation not working under my referenced australian number?
    2) Can I recover all my message history which should be saved in my itunes backup?  I am willing to revert to this backup state again if needed.
    Please help.
    Thanks.

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

    After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

    reinstall by clicking setup on your disk or downloading and installing,
    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Business Rule err The following value is not valid for the run time prompt.

    Hyperion Planning v 9.3.3
    I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
    The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
    If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
    The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
    The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
    What am I doing wrong - I have tried restarting the Planning service and the EAS service.

    My preferred method of doing this is:
    1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
    2. On the form, have business rule set to run on save, use members on data form and hide prompt.
    Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
    Deanna

  • Calendar Issues - "Repitition is not working for the item you tried to access"

    I ran into an interesting error when troubleshooting a calendar issue today, wondering if anyone has seen it.
    Exchange 2010 SP2 latest RU, Outlook 2010
    User changes then start time for a recurring meeting, changes in everybody's calendar but hers 9still shows in her calednar as the original start time)
    Logged into OWA to see if her claendar reflected the correct start time there - no, still  shows the old start time.  So I open the meeting, have a quick look, and the following error pops up:
    "Repitition is not working for the item you tried to access.  It's possible either the start or end date are not correct"
    Has anyone seen this error in OWA before?
    TAG

    Hi,
    Please double check whether the updated start time and end time are changed properly in attendees’ calendar. Also confirm whether the updating message is in the organizer’s sent items both in OWA and Outlook.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • JComboBox - Bottom border is not visible for the first time

    JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    This happens because the list when dropped down goes out of the frame.
    If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
    I am using jdk1.3.1_02.
    Any Help would be great.
    Please find the code below.
    Thanks,
    Sridhar.
    //file: Lister.java
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Lister {
        public static void main(String[] args) {
            JFrame frame = new JFrame("Lister v1.0");
            // create a combo box
            String [] items = { "uno", "due", "tre", "quattro", "cinque",
            "sei", "sette", "otto", "nove", "deici",
            "undici", "dodici" };
            JComboBox comboBox = new JComboBox(items);
            comboBox.setEditable(true);
            // put the controls the content pane
            Container c = frame.getContentPane( );
            JPanel comboPanel = new JPanel( );
            comboPanel.add(comboBox);
            c.add(comboPanel, BorderLayout.NORTH);
            c.setBackground(Color.white);
            comboBox.setBackground(Color.white);
            comboPanel.setBackground(Color.white);
            frame.setBackground(Color.white);
            frame.setResizable(false);
            frame.setSize(200, 200);
            frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
            frame.setVisible(true);
    }

    Hello,
    try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
    Tim

  • Drop down list(JComboBox) - Bottom border is not visible for the first time

    Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    I am using jdk1.3.1_02.
    Did any one face this issue.
    Please let me know.
    Thanks,
    Sridhar.

    I must be a little confused regarding your question.
    You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
    Lance

  • My camera on my iPad 2 has stopped working for the second time.

    My camera on my iPad.2 has stopped working for the 2nd time. Last time it just started working again after a couple of months.
    I have tried closing the camera app completely & also re-booting the iPad completely but to no avail.
    Any ideas anyone?

    You'll first need to have iTunes on your computer - from the summary page (the one that opens when you select the iPad in iTunes) it'll give you options for backing up and restoring it. On that page just select 'restore iPad' and that'll get it started.
    Hope it's just software then, those out-of-warranty replacements can get pricey.

  • Help!!! 8i&9i can not work at the same time

    I have installed 8i&9i in one Solaris8, and the port and listener name is diffendent, but now 8i&9i can not work at the same time.
    pls help me
    thanks anyway.
    John

    I have hard time digesting your concern.. I have 4 Different instance of oracle running on sun 2.8.
    8.0.5, 8.1.7, 9.i rel 1, 9i rel 2. No issues there...
    The simple things is to check is you .profile ( env variables)
    Example ...
    Check you .profile or .cshrc ( Depends on the SHELL You are using )
    Let say you have .profile
    THERE IS SETTING SUCH AS...
    ORACLE_SID
    ORACLE_HOME
    LD_LIBRARY_PATH
    PATH
    etc..
    You could try the following..
    log into to you sun box..
    do echo $ORACLE_SID this will give you current SID YOU have available to work with..
    so lets say if you have a 8i SID CALLED orcl8i
    example assume you have .cshrc
    setenv ORACLE_SID oracl8i
    setenv ORACLE_HOME /oracle8i_HOME_PATH...
    setenv LD_LIBRARY_PATH /oracle8i_HOME_PATH//lib: etc..
    etc...
    then
    you could validate by doing echo..
    echo $ORACLE_HOME
    echo $ORACLE_SID
    now try svrmgrl
    this should work..
    as far as 9i you no longer have svrmgrl..
    you have to apply the above method and log into the sqlplus.
    hope this help...
    If there is a specific question email me [email protected]
    good luck.

  • Photoshop Elements does not start for the second time

    Hello,
    our customer has problem with PS Elements 12. He can start it for the first time and everything works fine. But when he closes the program and tries to start it again, it will not start. It doesnt even say anything. No error mesages or anything. He tried to instal a trial version of PS E 13 and it does the same thing.
    He's running Win 7 SP1 64 bit
    Any sugestions? Thank you.

    Hi,
    It has been known that the Welcome screen sometimes fails to close properly and prevents a second load.
    Most people have overcome the problem by creating a shortcut direct to the two main applications.
    Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
    Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Brian

  • New Mac Mini. Can not boot for the first time.

    Hello Mac to all the mini community. I recently buy a mac mini and it is not able to boot for the first time.
    The only progress is the apple logo, the grey screen and the loading circle.
    I was able to boot in safe mode by holding the power button and plug the power cord and i saw the following message:
    'Unable to find driver for this platform: \ACPS\.\n'0/sourcecache/.....
    debugger called <panic>
    can't perform kext scan: no kext summary
    OSD process name correspondling to current threat: unknown
    MAC OS Version:
    Not yet set
    Kernel Version:
    Orvin Kernetl Version 11.0.1....
    So can you please provide any feedback on how to reslove the issue?
    Thanks in advance

    A new Mac should already have OS X installed on it and boot right up .....?
    Mac Pro & Mac mini Fast Start: The new user's guide to the Mac
    You should be able to open the box, plug in the power cord, your Display, Keyboard and Mouse, push the power button and start using it.
    If not, then you need to return it or exchange it for one that works properly.

  • Page does not load for the first time

    Hi,
    When I enter the URL to load the page, it does not work, i.e I get page not found message. But when I refresh(F5) the page gets loaded. This is just not for the login page but all my report and form pages and this happens only for the first time I try to access in the day. I couldnt understand why it happens? Can someone help me to understand the problem I am facing?
    Thanks

    What does the appache log says?
    Your appache server home > Apache > Apache > logs > access_log.current_date
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

Maybe you are looking for

  • Overheating while using Windows XP with Bootcamp

    Hi, I bought a MacBook Pro last September 2009. The MacBook Pro came with Leopard but I installed Snow Leopard a couple of weeks later. I need to use some Windows-based programs so I am using Windows XP with Bootcamp. However, I notice a high overhea

  • XPRESS code to find all users with a specific Admin Role

    I've been playing around for a while with a way to get a list of all users that have been assigned a particular Admin Role. I have a role for which I want a specific subset of users to be approvers on it, and I want to greate a Rule that will check f

  • Linux(suse 10.2) PPC

    hi, where can i found a jdk and an IDE that works on linux(ppc) and it's possible i m looking for a J2EE server thank u

  • PSE -5, loss in sharpness of pictures when placed in slide show

    In PSE-5, when good pictures are transferred from tagged groups to the slide show, there is a significant loss of picture quality despite using "high quality". Is there a way to make the pictures in slide show have the same quality an in the storage

  • AirPlay stoppes working as I change to a different zone.

    Using an iphone to play AirPlay, in my different zones- each zone has a apple extreme powering the same wifi network. But as I move from one to another the wifi drops out and is unable to connect, therefore continue to play music.