Phone volume low.

My phone volume is very low only for calls. I use the Voxer walkie talkie app and the ear piece volume is loud, but as soon as I make a call or listen to a voice mail, the volume is near mute as max volume. Any solutions?!

Hi chapman008,
If you've got volume working fine in one app but not others, restoring the phone is a good troubleshooting step:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Cheers!
- Ari

Similar Messages

  • Why is the volume of my phone so low in calls ?

    Why is the volume of my phone so low in calls ?

    Hey there Claudia,
    It sounds like the audio from the receiver is low when you are talking on the phone. I found this article for you to help troubleshoot this issue named:
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Receiver
    Follow these steps to resolve the issue:
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    Restart the iPhone.
    Make sure your device is up to date.
    If the issue is not resolved after restoring the iPhone software, contact Apple Support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I phone 4s after update os5.1.1 my phone ring and hearing phone volume so low now

    phone 4s after update os5.1.1 my phone ring and hearing phone volume so low now

    Place it in to recovery mode and restore.
    http://support.apple.com/kb/HT1808

  • Since update yesterday my speaker phone volume is real low

    Since updated my Galaxy 5 on yesterday the speaker phone volume is real low..anyone else experiencing this or know whats going on? I haven't had this phone 3 weeks and now this....

        We want to see you enjoying the update on your new phone, stina34. Are ringtones and other audio like music still playing at the same level as before the update? While on a call, have you tried to adjust the volume up and down? Is the call volume when not using speaker phone still at a louder level?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Low speaker phone volume

    What's the deal with the speaker phone on the 3gs? It appears to be using the same volume as the earpiece speaker. You can barely hear the person talking when you have it on speaker phone.
    However when using the Ipod or something like Pandora the speaker volume is really loud.

    Yea, that has been one of my biggest complaints about the iphone. The speaker phone volume is embarassing, you can barely hear the person talk when you put them on speaker in regular environment. I wish they would make it as loud as the music volume. I remember Apple releasing a software update to make the speaker phone louder back with the 1.0 software series. I hope they do another one of those updates and make it loud as ****..lol.

  • When I put headphones into my phone volume going down automatically

    I have a iPhone 5 IOS 7.1.2 when I plug my headphone into my phone volume going down automatically please help me thank you

    Your iPhone has separate volume settings for using headphones and when using the on-phone speakers.  In other words, the volume will change when headphones are plugged in.  This is by design.  There is no separate setting in advance, just the change in volume setting after you change the audio device.  For me, this is good because I usually have the volume up high when using the speakers and want it significantly lower when using the headphones.  Having the individual settings keep me from blasting my ears when I plug the headphones in.

  • 1.0.1 update: has your phone volume improved?

    Many people are saying that the 1.0.1 update has improved the phone's low volume problem while others are saying there is no change. We need to figure out why. I'm suspecting it's a hardware difference like the "5" vs. "7" screens.
    If you have updated to 1.0.1 please post whether or not you notice an improvement in the phone volume and whether your serial number (from the back of the phone) starts with a 5 or a 7.
    For the record, mine is a 7 and I had no volume improvement.

    I had a volume problem "7" model, I could barely hear when I held it up to my ear. But although I have not updated to 1.01, suddenly my volume is very loud. I actually had to turn it down, for the last two days, as it was much too loud. Perhaps, it was the way I held it to my ear. I noticed that I was holding it cocked at an angle, I am now holding it flat against my cheek, and what a difference. Also when I first hold it to my ear, it is soft, and then sort of a click, and the volume jumps way up. Do not know what else it could be, as I haven't changed anything else. My wife called me in the car the today, and even with the windows down, I could hear her. Maybe it is something AT&T did....I am not that familiar with how cell phones and their signals operate, so it is just a guess. I just know that I can now hear clearly. Any ideas why?
    Robert

  • Speaker phone volume

    I have noticed the speaker on the iphone sounds great when listening to music, it's loud and clear. But when I try to use it as a speaker phone the volume is so low I can't hear the person on the other end at all. Is there a separate volume control that I'm missing?
    Message was edited by: Phil Nolan

    The update has not worked for me. The speaker phone volume is so low that I can hardly hear it at all. Funny, because the iPod volume works fine through the speaker.
    David

  • Phone Volume

    the phone volume is very low. If you use it in the car with it is difficult hearing it above the road noise. That goes for the receiver, speaker, or bluetooth headset. I've seen other complaints like this too. Is there a solution? I saw an app that can boost the volume for music, but I need a solution for the phone.

    ?? use the volume control whilst a call is active??

  • How do you increase the voicemail volume on an iPhone 4s ( Verizon ). The phone volume is fine. It is when I retrieve voicemails. Even the speakerphone is faint. I have adjusted the side volume buttons and the volume control in settings.What am I missing?

    How do I increase the voicemail volume on an iPhone 4s ( Verizon )? The phone volume is fine. I have adjusted both side volume buttons as well as the volume control in settings.

    Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty.  Checking is free, service on an out of warranty item is not free.
    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
    Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4.

  • Problems with Phone Volume (Ringtone) with iPhone 3G and v20

    It seems with then new iPhone 3G and/or version 2.0 that everytime my phone either is turned off or sleep mode activated, it always resets my phone volume to about 50%. I always have to manually turn the ringer volume up each time. Ive restored the phone and it continues to do so. Any thoughts?????

    I have had a similar problem with my original iPhone and have not yet figures out how to fix it.

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • Computer interferes with phone volume

    My mother's new (used) eMac causes a drastic lowering of the volume of incoming phone calls. She doesn't even have to be using it--it simply has to be plugged in! If she unplugs it, callers on the phone can be heard perfectly again. All filters (wall jack) and wiring are correct. The phone is a Uniden 5.8 GHZ cordless; the phone and Internet provider, AT&T. Any advice at all from any smart person would be greatly appreciated. Thanks in advance.....macquest

    Hello again,
    My next suggestion would be to try replacing the filter. These can be temperamental and trying a new one may resolve the issue. Normally, an ISP will supply more than one with your modem so you might want to check to see if you have more in with the packing materials that came with the modem if you still have it.
    Additionally, certain volume settings are held in the PRAM settings. I know it is the phone volume that you have said is lowering but I am wondering if the computers volume levels could have anything to do with the problem.
    See: Mac OS X: "What's stored in PRAM"
    You may want to try resetting PRAM. In the article linked to, there is a link in the left side bar for how to reset PRAM.
    This should not hurt anything but you may need to reset certain settings afterwards such as date & time etc.
    littleshoulders

  • Plantronics m155 bluetooth paired with ios 8.1.3, cuts the phone volume when I turn  on, but won

    Plantronics m155 bluetooth paired with ios 8.1.3, cuts the phone volume when I turn  on, but won't transmit the streaming podcast through the earpiece.

    Hi Eslam El-Gammal,
    Welcome to the Apple Support Communities!
    I understand that after resetting your iPhone, you are being prompted for Apple ID information that is not yours. This can happen if an iPhone is restored without turning off the Find My Phone feature. For more information on this, please refer to the attached article. 
    Find My iPhone Activation Lock - Apple Support
    Best regards,
    Joe

  • Increase speaker phone volume

    I have increased speaker phone settings to maximum both on the side slide and in settings. Are there any add-ons which can increase speaker phone volume?

    you can increase but its depend on your speaker capacity if you increase it more then speakers capacity i will damage you speaker.

Maybe you are looking for

  • How can I export a project on an external drive in the latest version of iMovie?

    Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more.. So, how can I export a project

  • Abap program variant error in process chain

    Hi experts, I need your help one more time... In our process chain, we run the program RSIMPCUST to bring currency and units from the source system to BW. We have created a variant to run this program and call it in the process chain. One of the vari

  • Program monitor activates automatically when sequenz starts to play

    Hey, This really slows down my personal workflow, whenever I hit spacebar the "program monitor" gets active, but I have my "projekct monitor" in the same spot and I want to browse my footage as the sequenz is playing  and since I have a second monito

  • PGI is not allowed in past date

    Dear Experts, I have a situation where we want to post the PGI/Delivery on past date. I recieved the stock on 20-May so system should allow the PGI/Delivery on 20-May. But when trying to do PGI, system is throwing the error message "Deficit of BA unr

  • Entitlements Server - Configuring SSM to run without an SCM

    I am using the ConfigTool to create java-ssm instances. What do I need to specify to create an SSM that doesn't use an SCM? Or, how do I update the configuration of an existing ssm to shut off the need for an SCM (though the documentation says you ca