Photo Gallery hyperlinks to "One of my Pages" not working

I manage a website for our lab at the University of Notre Dame. We have used one of the Photos pages to include pictures of all our personnel. The pictures have captions with the person's name. The names were hyperlinked to more information about that person. Some of these links were to pages on the same site and some were to external sites. The site was originally created using iWeb '08, but I now update it on a new computer with iWeb '09. After publishing it again, none of the hyperlinks on this page work. The navigation bar and links on other pages seem to be fine though. Is there a way to resolve the problem without reverting to iWeb '08?

I'm having the same problem. Can you give me an idea of how this is possible using AJAX or point me at a tutorial?
for every iweb photos page iweb generates an rss.xml file with it, the captions are kept in the rss.xml .
so you can use ajax method to read the rss.xml and figure out what need to be manipulated.
there is no tutorial of any kind for iweb ajax widgets, I have not seen any one yet to crack an iweb widgets (this forum or elsewhere); so you are on your own.
that said you can hyperlink photos page captions and thumbnails with simple javascript (simple mapping lookup), but you still need to know javascript and iweb widgets.
here is my simple javascript sample: http://temp.cyclosaurus.com/NoThumbnails/Photos.html
thumbnails and captions are hyperlinked to apple, ggogle and yahoo.
code is linked to the sample, you'll have to adapt it to your own needs.

Similar Messages

"Link to One of My Pages" not working properly in iWeb '08

This week I encountered a new problem doing something I've done successfully many times in the past.
*_Here is the basic info:_*
I created a site that had a main page and then four subsequent pages (5 in total). I created a text box (seen bellow) that listed each page.
I then used the "Link to One of My Pages" option to link each word to the corresponding page.
I then cut and past the text box on each page so that the links would be present on each page.
Then in iWeb I checked all the links on each page to make certain they navigated properly to the correct page. Everything checked out fine all the links worked properly.
Next I saved and exported to a folder to check the site before going live.
*_Now here's my problem_*
I launched safari and opened the site locally — I then discovered that only the first 2 of 5 links worked — the remaining three did not register as links.
I launched FireFox same problem. went back to safari emptied the cache, did not help.
Finally, I went back to iWeb and repeated the process several times. I've rechecked, and recreated the links and exported to a folded multiple times with no change — still only the first 2 of 5 links work.
Has anyone encountered the same problem? I would greatly appreciate any suggestions or remedies
Thanks you
Message was edited by: NYCguy-71

Well I discovered the the solution to my own post above — For those keeping a score card I'll just chalk this one up to operator error and not to iWeb troubles.
The basic problem was that only two of five hyperlinks in a text box worked when my site was published.(please refer to my original post above for more details)
*_here is the fix:_*
I was working with the layout view hidden.
When i turned "show layout" on, I discovered that the lower margin and footer were bisecting the text box containing the hyperlinks. (seen bellow) As a result, while visable when published, the top two links worked fine and the bottom three links didn't.
When I adjusted the lower margin and footer to fit the text box and published the site everything worked properly.
So I guess the lesson learned is to check the layout — Even though I had content that was outside of the page parameters it was still visible on the published site just not functional.
I share this in the hope that my time and effort spent figuring this out might help someone else avoid the same frustration.

I am trying ot install my cs6 online. it says that my code has been redeemed but i took it off of one of my laptops to download it onto this one. it is still not working. please help

I am trying ot install my cs6 online. it says that my code has been redeemed but i took it off of one of my laptops to download it onto this one. it is still not working. please help

Find your serial number quickly
Download CS6 products
Activation & Deactivation Help
Mylenium

HT201317 how do I save my photo stream photos to my camera roll? It's not working.

how do I save my photo stream photos to my camera roll? It's not working.

Photo stream photos are not included in your backup, only camera roll photos are. Photo stream photos can only be accessed from an iOS device or computer that is signed into your iCloud account and has photo stream enabled. However, they only remain in iCloud for 30 days; if the photos are older than that they are no longer available to download.
If the photos were in the camera roll on your 3GS when you last backed it up, restoring the backup to another iPHone should recover them. If this is an iCloud backup, you'll need to do this before the backup is 180 days old or Apple will delete it.
If you need to restore the iCloud backup to your 4s, back up your 4s to your computer using iTunes, then restore the iCloud backup of your old phone to it, import the recovered photos to your computer (as explained here: http://support.apple.com/kb/HT4083), then restore your phone to the iTunes backup your made earler to recover your data.

Login page not working in EBS R12 after autoconfig.

Hi,
We are using EBS R12 on windows 2003 server 32 on a test machine. As we were making some changes using autoconfig,
as the Login page not working in EBS R12 after running autoconfig.
Kindly help us.
Thanks in advance.

Hi,
Rollback the changes and run AutoConfig, see if you get the same error or not then -- See (Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12) for details "2.5. Rolling Back an AutoConfig Session".
Regards,
Hussein

I have updated my facebook application to the latest one and it is not working..what should i do?

I have updated my facebook application to the latest one and it is not working...i deleted it and reinstalled it and still not working..what shoul i do?Thank you.

cristinar wrote:
I have updated my facebook application to the latest one and it is not working...i deleted it and reinstalled it and still not working..what shoul i do?Thank you.
As suggested try a reset: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Also, it might help if you provide a little more detail on what you mean by "not working"

Adobe CC Education Eligibility Page Not Working!

I work for a university and bought the educational version of CC. When I clicked the link in the email provided by Adobe to upload verification of my employment... I filled out the form and when I click the button at the bottom that says "Review and Submit" I get a page not found error. Someone at Adobe please help!

Different regions may have slightly different processes. Take a look at the following document: http://helpx.adobe.com/x-productkb/policy-pricing/education-faq.html
I hope that this will help you get going.
If you still get that Page Not Working error, try the same with a different browser and check.

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Hi,
I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
After that, you should be able to scan documents with the Preview App.
For more information on the printing system in OS X Snow Leopard visit:
http://support.apple.com/kb/HT3771
Hope this helps!

Is the update page not working for of our devices.

Is the update page not working for apps? I cannot get it to load with any of our devices. iPhones or iPads?

There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/

Hi. I have just started using Adobe Photo Elements 11 and Adobe Premiere Elements 11. I have many pictures in my photo gallery that I would like to use for a project that I am working on. I opened my photo gallery and it indicated that I could not use

Hi. I have just started using Adobe Photo Elements 11 and Adobe Premiere Elements 11. I have many pictures in my photo gallery that I would like to use in a project that I am working on. When I opened the photo gallery it said I could not use the photo gallery because it has not been updated. Can someone please help me with this...let me know how to do this...or...Thank you,

BNN, even though I understand what KT is saying, your thought resonates with mine. When it comes to building and maintaining my website, I see myself more as a photographer than as a web designer. Hence, even though Apple may not be actively developing (and we are guessing on this one, arent we) iWeb, the existing functionality should do plenty of good to me for next couple years at least.
That said, they released a point update a few days back and with the whole cloud thing building momentum and mobile me going for free, why would Apple want to pull the plug on such a fantastic product?

Multiple photos per page not working :( Please help

I see the option for multiple photos per page. It was available 5 minutes ago but now is grayed out and I can not get it back. This is very annoying. Can someone tell me why iPhoto won't let me print multiple photos on the same sheet?
Thanks

Remember that we know nothing except what you tell us - that it is not working is not much
The most common reason that print multiple photos per page is grayed out is that you either have a photo size/paper size combination that will not fit multiple photos (ie trying to print 2 8x10 photos on an 8 1/2 x 11 paper) or you have not selected but one photo
If these do not help please give us some more detail on what you are doing
:LN

How can I print only one or two pages, not the whole article?

I just want to print one page not the whole article. There is no provision for what pages to print.

I don't know where they are in Word but the print dialog is standard throughout OSX and this seems logical enough.
The only problem is the Paper Handling is hidden under Layout. But sort of makes sense.
Peter

How to display the one BSP View page (not a start page)Through URL link..

Hi Sir/Madam,
             I want to open one BSP view page through URL link...
Let me Explain clearly..
            I have an Z application ZHRRCF_APPROVAL..In this application approve.bsp file i have added som more Fields..and Finally I am going to click ApproVe Buton /Reject Button.When i click the reject button the the items are rejected.Its working fine.....
          My Requirement is :
               1. I want to display the approval page directly when i click the URL link from mail box.--i am getting this .. No issues..(Got the URL link from function module)
               2. After opening the approval page when i click URL link, when i click the reject button-- i am getting the error "The following Error Text was processed in the system GR2."Access via NULL object reference not possible"
               3. How to proceed the this URL link without error .. the URL link is
https://abd00093.de.abb.com:8200/sap(bD1lbiZjPTIwMA==)/bc/bsp/sap/zhrrcf_approval/application.bsp?objid=50003421&otype=NB&plvar=01&requestdate=20090121&requestedRsnCode=01&requestedstatus=1&requester=USRECRUITER1&SAPWFCBURL=https%3a%2f%2fabd00093%2ede%2eabb%2ecom%3a0000000000008200%2fsap%2fbc%2fwebflow%2fwshandler%3f_sapwiid%3d000000018491%26_saptask%3dTS51807979%26_saplogsys%3dGR2CLNT200%26_sapuname%3dLINEMANAGER%26_saplangu%3dE%26sap-client%3d200
( I got this URL directly using my own function module.. In this function Module i was not getting the SAPGUID -- the error is because of that i am not sure..)How to get this sapguid dynamically..
                Please guide me to proceed this req asap..
I am waiting for your reply ....Please
Thanks and Regards
Mohan,P

Please have BPEL loggers both at domain and system level to DEBUG mode. Set all loggers to DEBUG as you are interested to see the entire sequence flow..however, some loggers give you unnecessary info ;/ apart from cube, activation, delivery, dispatch, persistence.
Added to this, you might want to try SOAPUI, Fiddler, HTTP Analyzer.

Hyperlink to iWeb Page not working

I have created an iWeb page. I have a hyperlink to the page on a document. The hyperlink takes me to a mobile me error page ie "We can't find the page you requested. Please make sure the URL is spelled and capitalized correctly, and try again."
Yet if I copy and paste the exact same url I have entered in the hyperlink filed into the address bar on Safari it goes to the right page no problems.
Any ideas please?

Is that the page you're trying to link to in the PDF document?
I was able to place a hyperlink in an rtfd text file and and Word 2008 document to your web page that works. The link in the Word document takes about 5 to 7 seconds to get to Safari and open the Page. The rtfd document, created with Bean
Bean, a great, free word processor, opens the page in Safari almost immediately.
In Work I used the Insert ➙ Hyperlink menu option and entered the URL of you page and the text to use as the link. For the Bean document I clicked and dragged the link title at the top of your web page onto the Bean page and saved as a rtfd formatted file. If the page is saved as a plain text document the hyperlink is lost.
Click to view full size
If I do a Print ➙ PDF ➙ Save as PDF from Bean I get a working link in the resulting PDF file. But with Word the link does not work.

Photo Gallery hyperlinks to "One of my Pages" not working

Similar Messages

Maybe you are looking for