"Link to One of My Pages" not working properly in iWeb '08

This week I encountered a new problem doing something I've done successfully many times in the past.
*_Here is the basic info:_*
I created a site that had a main page and then four subsequent pages (5 in total). I created a text box (seen bellow) that listed each page.
I then used the "Link to One of My Pages" option to link each word to the corresponding page.
I then cut and past the text box on each page so that the links would be present on each page.
Then in iWeb I checked all the links on each page to make certain they navigated properly to the correct page. Everything checked out fine all the links worked properly.
Next I saved and exported to a folder to check the site before going live.
*_Now here's my problem_*
I launched safari and opened the site locally — I then discovered that only the first 2 of 5 links worked — the remaining three did not register as links.
I launched FireFox same problem. went back to safari emptied the cache, did not help.
Finally, I went back to iWeb and repeated the process several times. I've rechecked, and recreated the links and exported to a folded multiple times with no change — still only the first 2 of 5 links work.
Has anyone encountered the same problem? I would greatly appreciate any suggestions or remedies
Thanks you
Message was edited by: NYCguy-71

Well I discovered the the solution to my own post above — For those keeping a score card I'll just chalk this one up to operator error and not to iWeb troubles.
The basic problem was that only two of five hyperlinks in a text box worked when my site was published.(please refer to my original post above for more details)
*_here is the fix:_*
I was working with the layout view hidden.
When i turned "show layout" on, I discovered that the lower margin and footer were bisecting the text box containing the hyperlinks. (seen bellow) As a result, while visable when published, the top two links worked fine and the bottom three links didn't.
When I adjusted the lower margin and footer to fit the text box and published the site everything worked properly.
So I guess the lesson learned is to check the layout — Even though I had content that was outside of the page parameters it was still visible on the published site just not functional.
I share this in the hope that my time and effort spent figuring this out might help someone else avoid the same frustration.

Similar Messages

Photo Gallery hyperlinks to "One of my Pages" not working

I manage a website for our lab at the University of Notre Dame. We have used one of the Photos pages to include pictures of all our personnel. The pictures have captions with the person's name. The names were hyperlinked to more information about that person. Some of these links were to pages on the same site and some were to external sites. The site was originally created using iWeb '08, but I now update it on a new computer with iWeb '09. After publishing it again, none of the hyperlinks on this page work. The navigation bar and links on other pages seem to be fine though. Is there a way to resolve the problem without reverting to iWeb '08?

I'm having the same problem. Can you give me an idea of how this is possible using AJAX or point me at a tutorial?
for every iweb photos page iweb generates an rss.xml file with it, the captions are kept in the rss.xml .
so you can use ajax method to read the rss.xml and figure out what need to be manipulated.
there is no tutorial of any kind for iweb ajax widgets, I have not seen any one yet to crack an iweb widgets (this forum or elsewhere); so you are on your own.
that said you can hyperlink photos page captions and thumbnails with simple javascript (simple mapping lookup), but you still need to know javascript and iweb widgets.
here is my simple javascript sample: http://temp.cyclosaurus.com/NoThumbnails/Photos.html
thumbnails and captions are hyperlinked to apple, ggogle and yahoo.
code is linked to the sample, you'll have to adapt it to your own needs.

Links in converted DOC to PDF not working properly

I need to convert a word doc to PDF and retain the hyperlinks. The links all point to PDF documents in other folders. When I convert the word doc to PDF through word's 'save as' or PDF export, the links get update to web URL-like links that open the PDF document in a web browser. Is there a way to preserve the links so that they still open the PDFs in adobe and not a web browser?

Hey domallavena,
Could you please let me know what version of Acrobat are you using.
In order to open the PDF links in Acrobat only (not web browser), you will need to change settings of link by choosing "Tools> Content Editing> Add or Edit Link" Now, right-click on that link and choose Properties from the context menu.
Then, select 'Open a file' option to choose the file that you want to open when clicking on that link.
Specify open preferences whether you wish to open the file in new window or existing one and save the PDF.
Try this way and let me know how it goes.
Regards,
Anubha

One accordion tab panel not working properly

Hi,
Can you spot where my error is here, in years 4-5?
http://www.grad.umn.edu/gradwriting/IWP/
The first accordion panel is open; all other accordion panels
are shut at start . What am I missing? Thanks!

Your code is this
<script type="text/javascript">

</script>
but should be this
<script type="text/javascript">

</script>
Accordion3 and Accordion4 lines mixed up
Carl

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

error-page not working in J2EE SDK 5 Update 1

I recently migrated from Tomcat 5 to J2EE SDK 5 Update 1, and since, have not been able to get my custom error page working. I have verified the path to the error page by testing the link directly in a browser, but still see the default gray and white error page anytime an error occurs. This exact xml worked perfectly in tomcat 5 - am I missing something?
I have the following in my web.xml:

<error-page>
    <error-code>500</error-code>
    <location>/error.faces</location>
</error-page>

<error-page>
    <exception-type>java.lang.Exception</exception-type>
    <location>/error.faces</location>
</error-page>

<error-page>
    <error-code>404</error-code>
    <location>/error.faces</location>
</error-page>

Hi, Here is a link from Mozilla that addresses this : http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin
Page down to "Flash does not work properly and /or will not update."
When you have two SWF installed the websites use the old one, not the new one. Don't ask me why, I often wonder that myself. That's why when you disabled the old one, Flash didn't work.
Hope this solves the issue.
Thanks,
eidnolb

Starting today many ebay pages are not working properly.

myebay page is too wide to fit and the links on the right side do not work. Also, individual ebay items will not enlarge the picture when clicked.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
* "Clear the Cache": [http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

I have lost track of the number of websites that do not work properly on the iPad without Adobe Flash player which is unsupported. I cannot use retail sites, billing sites and most important of all job application sites. All are missing tabs, links, info

I have lost track of the number of websites which do not work properly on my iPad. They include retail sites, billing sites and most important of all job application sites. They all seem to require Adobe Flash Player which cannot be downloaded onto an iPad. Skyfire does not solve the problem. They all load without vital parts of the site such as tabs, links and correct formatting. Any suggestions?

Most such brower/service combinations have a difficult time working with Flash-based apps and often fail completely. Flash videos are usually the most successful content these browers can handle. You can try the others apps - Puffin, iSwifter, etc - but you may find that none of them work, in which case you will not be able to use your iPad with these sites other than by using one of the various remote control solutions to take over a computer running the full Flash Player.
IMHO, any developer that built a Flash application for a billing or job application site was an idiot, but I know that's out of the control of anyone but the relevant company.
Regards.

Header links in the web template is not working

Hi all,
I have a created webtemplete in that, header links in the web template is not working. But individually header links. I am not why they are not working in webtemplete.
guys please help for above situation.
Thanks,
James

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Export Button not working properly in custom OAF page.

Hi,
I have a custom page with a table region is there. There is an export button which exports the rows in an excel sheet.
But it is not working properly, as all the rows are not getting extracted.
Properties set for the export button::
Export all rows :: False
Any sugestion is highly appreciated.
Regards,
Arindam.

Hi Arindam,
Refer below links.
Mukul's Oracle Technology Blog: Implementing Export Button Functionality Programatically
http://dilipoaf.blogspot.in/2013/02/export-selected-rows-data-functionality.html
Thanks,
Dilip

Adobe CC Education Eligibility Page Not Working!

I work for a university and bought the educational version of CC. When I clicked the link in the email provided by Adobe to upload verification of my employment... I filled out the form and when I click the button at the bottom that says "Review and Submit" I get a page not found error. Someone at Adobe please help!

Different regions may have slightly different processes. Take a look at the following document: http://helpx.adobe.com/x-productkb/policy-pricing/education-faq.html
I hope that this will help you get going.
If you still get that Page Not Working error, try the same with a different browser and check.

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

"Save link as" in Right-click Context menu is not working properly.

Firefox 17: In a Google search, when I right click on a .pdf link, the popup window automatically gives a "url" filename and "Firefox Document" as filetype. Previously, the filename would be whatever it was on the website (ie. "filename.pdf") and the filetype would be "Adobe Acrobat Document".
I know this problem has less to do with Firefox and more to do with JavaScript, because the problem disappears if you disable JavaScript (Tools -- Options -- Content -- uncheck "Enable JavaScript"). What's happening is that JavaScript is somehow altering the link from a purely .pdf link to something else -- perhaps encasing the link inside a set of commands, and the computer is trying to save the command string instead of recognizing the link for what it is. When JavaScript is disabled in Google searches, the highlighted "[PDF]" link no longer appears in front of the link itself, and the "Save link as" function on the right-click works properly.
Any JavaScript junkies want to try their hand at creating a workaround? One that ensures that the reference created by the right-click context menu matches exactly what the filename is for the website?

The problem is that Google has an onmousedown attribute added to the links that modify a link if you click or right-click a result link to make the link point to a safe browsing check on the Google server.<br />
You can see that if you hover a link and you will notice that after you have (right) click a link the the URL changes to www.google.com/url?xxxxx.
You can use this bookmarklet to remove the onmousedown attributes.
<pre><nowiki>javascript:(function(){var e=document.querySelectorAll('*[id="search"] a[onmousedown]'),E,i;for(i=0;E=e[i];i++){E.removeAttribute('onmousedown')}})()</nowiki></pre>

Mouse is not working properly on a one month old HP Pavillion 15-NO28US

I'm sure it's already been talked about on here, but I haven't found a successful fix or the same exact problem as I'm having. I went thru the latest Windows 8.1 update recently (at least I think it was the update) and when I restarted my computer yesterday the mouse was not working properly. Like a lot of other people who are complaining about it, the two-finger scrolling and other similar features are not working, but what really bothers me is the the mouse is almost acting like it was changed to a left handed mouse. I've checked the settings and it is still set on right-handed, but when I click the left mouse button the small window opens up next to where I clicked, which has the copy, delete and paste options (and other regular options) in it. When I click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I downloaded and install the latest synaptic drivers and nothing happened. I even performed a system recovery last night to reset all setting and it's still not working. This really sucks because I've only had this computer for about a month and I've already lost everything I've put on it...most importantly all of my school work and music apps. Is there anything to fix this or can anyone tell me what's going on with this stuff, before I have to call into HP and have a melt down?

Hi Kevin3047,
Thank you for your query, I will do my best to assist you!!
I understand that after updating from Windows 8 to 8.1 your mouse is not performing correctly. You have tried the built in troubleshooter but to no avail.
You checked the settings and they appear ok, but when you click the left mouse button the small window opens up next to where you clicked, which has the copy, delete and paste options (and other regular options) in it. When you click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I grasp that you did a recovery but it did not help. You also stated you lost your data once, and that in itself is extremely aggravating, I agree.
Here is a step that may help.
Go to the Command Prompt and right click on it to run as Administrator
type sfc /scannow and press enter. This will scan for corrupted files and try to repair them.
Here are links to two documents that may aid with this process.
Troubleshooting Mouse Problems (Windows 8)
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Would you also please try a clean boot to see if it persists. Here is a Windows document to assist you.
How to perform a clean boot in Windows
If none of this has alleviated the issue, I suggest you do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still pesists, I would do a recovery again. You will be prompted during the recovery to backup your personal files to prevent data loss. I would suggest you choose yes, to prevent data loss.
Performing an HP System Recovery (Windows 8)
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
This will take it back to factory. Here is a document on Updating Windows 8 to 8.1 to assist you with doing the update again.
If you are still experiencing the issue, as @visruth stated I would contact HP support for assistance. They are able to remotely log onto your system to help with this difficulty.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Good Luck!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

"Link to One of My Pages" not working properly in iWeb '08

Similar Messages

Maybe you are looking for