Photography Quick Tips

Photo-Taking Tips
Get extra memory cards
If more than one person will be using the same camera buy a separate memory card for each person; this way, everyone can keep their photos separate, and you don’t run the risk of deleting someone else’s pictures.  
Memory cards for video
If you plan on taking a lot of video, it would be a good idea to use a memory card with a good amount of memory (at least 2GB) with a high write speed. With this being said most digital cameras do an average job of capturing video, but I would suggest getting a camcorder if video is a priority to you.
Pet Photography
When photographing pets, I would suggest using as much natural light as possible. To avoid red/green eye reflection I would suggest not using a flash or at least using an off camera lighting source. Get down to the pets level when capturing your image (would you get onto a ladder to take a portrait of a person).
Lens flare
To eliminate lens flare, use a lens hood on your camera or curve your hand around the outside of the lens.  If you want to read a more detailed post about lens flare you could click here.
Magic hour
The best natural light is the light right after sunrise and right before sunset, and this light typically lasts for about an hour. Magic hour is when the majority of professional natural light photographs are taken, and you will be very surprised how much better your images look when taken during Magic hour. When photographing sunsets don’t use a flash and mount your camera to a tripod. 
Shooting through glass
When shooting objects through glass, don’t use a flash and use a polarizing lens filter if your camera is a DSLR. I would also suggest switching your camera to manual focus (if your camera has this option) since the autofocus system of your camera could easily be fooled into focusing on the glass (especially if the glass is dirty) and not your subject.
Printing Tips  
Printer settings
Most printers allow you to change its setup depending on what type of output you are going to be printing too, and what type of quality you want. I would suggest setting your printer to Photo Paper and the best quality setting before printing your photos.
Photo paper
Not all photo papers are created equal! I would suggest investing in a high quality photo paper before printing your images.
Photo ink
I would also suggest making sure you are using photo-quality inks. You will be astonished by how much better your prints look when printed with high quality photo inks.
Archival
Lastly I would make sure that the paper you are using is archival if you want your images to last your lifetime. I would also suggest always handling your prints by the edges since the oils from a person’s fingers can cause your images to fade and discolor over time. If your prints are intended to be framed or put in an album I would suggest getting a few pairs of white cotton gloves which can be purchased at most art stores.

Photo-Taking Tips
Get extra memory cards
If more than one person will be using the same camera buy a separate memory card for each person; this way, everyone can keep their photos separate, and you don’t run the risk of deleting someone else’s pictures.  
Memory cards for video
If you plan on taking a lot of video, it would be a good idea to use a memory card with a good amount of memory (at least 2GB) with a high write speed. With this being said most digital cameras do an average job of capturing video, but I would suggest getting a camcorder if video is a priority to you.
Pet Photography
When photographing pets, I would suggest using as much natural light as possible. To avoid red/green eye reflection I would suggest not using a flash or at least using an off camera lighting source. Get down to the pets level when capturing your image (would you get onto a ladder to take a portrait of a person).
Lens flare
To eliminate lens flare, use a lens hood on your camera or curve your hand around the outside of the lens.  If you want to read a more detailed post about lens flare you could click here.
Magic hour
The best natural light is the light right after sunrise and right before sunset, and this light typically lasts for about an hour. Magic hour is when the majority of professional natural light photographs are taken, and you will be very surprised how much better your images look when taken during Magic hour. When photographing sunsets don’t use a flash and mount your camera to a tripod. 
Shooting through glass
When shooting objects through glass, don’t use a flash and use a polarizing lens filter if your camera is a DSLR. I would also suggest switching your camera to manual focus (if your camera has this option) since the autofocus system of your camera could easily be fooled into focusing on the glass (especially if the glass is dirty) and not your subject.
Printing Tips  
Printer settings
Most printers allow you to change its setup depending on what type of output you are going to be printing too, and what type of quality you want. I would suggest setting your printer to Photo Paper and the best quality setting before printing your photos.
Photo paper
Not all photo papers are created equal! I would suggest investing in a high quality photo paper before printing your images.
Photo ink
I would also suggest making sure you are using photo-quality inks. You will be astonished by how much better your prints look when printed with high quality photo inks.
Archival
Lastly I would make sure that the paper you are using is archival if you want your images to last your lifetime. I would also suggest always handling your prints by the edges since the oils from a person’s fingers can cause your images to fade and discolor over time. If your prints are intended to be framed or put in an album I would suggest getting a few pairs of white cotton gloves which can be purchased at most art stores.

Similar Messages

  • Quick Tip of the Week: Take a Quick Look at the files in Trash

    I ran this Quick Tip which was emailed to me today, but noticed that the Quick Look icon demonstrated isn't on my Toolbar, instead there's something called a Path icon, and Finder>View>Customise Toolbar is greyed out, so I do not appear to be able to change it. Quick Look works when I press the space bar, so it is on my iMac.
    Does anybody know why Quick Look isn't on the Toolbar, and how to change the Path icon for Quick Look?

    To open a Finder window, click a clear space on your Desktop. You'll see the word Finder top left in your screen. You can press command Command N on your keyboard or use your mouse and from the Menu Bar (top of screen) click File/New Finder Window.
    Migration Assistant will transfer all your files and important settings for you.
    To see exactly which Mac OS version you are running, click the Apple logo top left in your screen, then click, "About This Mac". The version number will be displayed in that pane.
    Carolyn

  • "Apple Quick Tip of the Week" podcast crashes AppleTV

    I have iTunes set to download the Apple Quick Tip Of The Week (AQTOTW) podcasts, and then sync them to my AppleTV. Nearly every one of the AQTOTW podcasts that I play causes the AppleTV video to stutter and eventually, the white Apple logo appears. After a few seconds, I am seeing the main menu.
    None of the other podcasts that I view on the AppleTV have this problem.
    The software on the AppleTV is up to date. iTunes runs on a Macmini which is running Leopard (up to date as well).
    The AQTOTW are very useful, how can I view them on the AppleTV?

    There are a number of good hints in this post, many of which apply in Leopard.

  • Quick tip of the week

    Hi All,
    Have you noticed that the "quick tip of the week" on the apple.com/business/videotips page are done on machines running tiger. A number of them including some of those most recently added (e.g. "When a pdf is too big", and "zip up your files") seem not to be applicable in Leopard. I find this a bit weird. Come on apple get up to speed with Leopard please.
    BTW anyone know how to shrink down the size of a pdf in Leopard?
    Thanks

    There are a number of good hints in this post, many of which apply in Leopard.

  • Quick tip - reducing PDF file size

    My STANDARD menu for printing doesn't look anything like the one that is being used in the demo.
    I do have the "cover & pages" part for *some documents*, but there is nothing there when I drop down concerning Color synching. I make a lot of PDF files and Sure would like to be able to reduce the size.
    Where did the printing menu come from in the quick tip?

    npjvette wrote:
    The problem with printing is cannot scan, and one printer PSC 1350 prints anything it wants with no relation to what I sent to the printer. the Business jet 1100 doesn't want to print anything. these are HP issues that are crippling my business.
    I don't think there is a Leopard driver for the 1350, but you should check HP's site to make sure. There is an HP driver for the 1100. Are you using that driver? You can try deleting and re-adding the 1100 using the Leopard supplied HP driver.
    there is no "compress PDF" box on my print menu under the PDF checkbox/ menu. at least on neither of my computers which both have leopard installed. this on the standard drop down menu. what print dialogue are U using.
    I am using the standard print dialog. What menu items do you see under the PDF menu?

  • Quick Tip: How to save PDF forms in Adobe Reader X | Acrobat X Tips & Tricks | Adobe TV

    This quick tip looks at the differences between a basic PDF form and a Reader-enabled PDF form and how to save either PDF form using Acrobat Reader X.
    http://adobe.ly/GJzFxV

    You have not explained how to change the document into an "_distributed.pdf that has the ability to be saved.  That was the least helpful video that I have ever seen

  • Quick Tip: How to create a fillable PDF form | Acrobat X Tips & Tricks | Adobe TV

    This quick tip explains the steps and some of the terms you'll encounter when you create a fillable PDF form using an existing PDF document in Acrobat X Std. or Pro.
    http://adobe.ly/GJAUgk

    Hi, can you please let me know which version of Adobe you used in this tutorial?
    I have the Adobe Reader XI - is there a similar tutorial for this version?
    Thank you.

  • Quick Tip - Color Lookup Adjustment Layer in Photoshop CS6 | The Complete Picture with Julieanne Kost | Adobe TV

    In this Quick Tip, Julieanne demonstrates the new Color Lookup Adjustment layer and walks you through how to download a template to quickly apply these new “looks” to your images. The files she references can be found here. http://adobe.ly/Ng3afA
    http://adobe.ly/LiGadT

    Can the Camera Calibration tech. in LR be used to keep IR raw images looking like the jogs on back of camera?

  • Quick Tip: How to save form data in Adobe Reader | Acrobat X Tips & Tricks | Adobe TV

    A quick tip that explains how to go about saving data that you enter into your form in Adobe Reader X.
    http://adobe.ly/yddZN8

    I am trying to download an application from a website using Adobe Reader X and the Adobe Reader 9.5, but I cannot save the information.  I am suppose to send it in PDF format, but when I do, there is nothing in the fields.  I do not want to spend over $20 for a program.  Thank you!  GOD bless

  • Labview Quick Tips list

    Hi Everybody.
    You know each time you open LabVIEW 5 or 6i, we can access all Quick Tip
    via a small window.
    I would like to know if somebody know where is the file or the VI containing
    all these Quick Tips on both versions.
    Thank you
    Rejean

    Rejean Lafortune wrote in article
    <[email protected]>...
    >
    > Hi Everybody.
    >
    > You know each time you open LabVIEW 5 or 6i, we can access all Quick Tip
    > via a small window.
    > I would like to know if somebody know where is the file or the VI
    containing
    > all these Quick Tips on both versions.
    > Thank you
    Those are embedded in the LabVIEW resource files in the Resource directory
    inside
    of the LabVIEW directory. LabVIEW resource files are binary files with a
    similar data
    structure as the resource fork of Macintosh files. Although it's possible
    to look into
    these files with a hex editor for instance, it is hard to retrieve
    information from them
    and even harder to change anything inside of them.
    Rolf Kalbermatter
    CIT Engineering Nederla
    nd BV tel: +31 (070) 415 9190
    Ohmweg 11A fax: +31 (070) 415 9191
    3442 AA Woerden http://www.citeng.com
    Netherlands mailto://[email protected]
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • LabVIEW Quick Tips

    The LabVIEW Documentation team needs information about how you use the LabVIEW Quick Tips, which are included in the LabVIEW Help. The most recent version of the Quick Tips are at http://zone.ni.com/reference/en-XX/help/371361A-01/TOC7.htm.  The Quick Tips also are available in LabVIEW 6.0 and later by navigating to the LabVIEW Help and selecting Quick Tips in the contents pane.
    1. How often do you use the LabVIEW Quick Tips?
     a. All the time
     b. Sometimes
     c. Never
     d. I didn't know that the LabVIEW Quick Tips existed.
    2. Would the Quick Tips be more helpful if each tip was integrated into a relevant help topic?
    3.  If the Quick Tips are integrated into individual help topics, would you find it helpful for the tips to remain in their current state as a list of tips?
    4. Is there any additional information not currently in the Quick Tips that would be helpful to you when using LabVIEW?
    Message Edited by Support on 01-26-2006 10:36 AM

    1. How often do you use the LabVIEW Quick Tips?
      d. I didn't know that the LabVIEW Quick Tips existed.
    3. Would the Quick Tips be more helpful if each tip was integrated into a relevant help topic?
      Yes
    4.  If the Quick Tips are integrated into individual help topics, would you find it helpful for the tips to remain in their current state as a list of tips?
      Perhaps a subset of the list related to the topic
    3. Is there any additional information not currently in the Quick Tips that would be helpful to you when using LabVIEW?
      Not that I can think of
    Quite a numbering scheme here: 1, 3, 4, 3.
    - tbob
    Inventor of the WORM Global

  • Can't Read NTFS External HDD after Quick Tip Execution

    I've recently shifted from Windows to OS X - and I wanted to use my 1TB Seagate External to transfer data from my old laptop to my Macbook Pro. I was aware that OS X cannot write to an NTFS drive and hence I executed the Quick Tip from this article to try and by-pass this:
    http://computers.tutsplus.com/tutorials/quick-tip-how-to-write-to-ntfs-drives-in -os-x-mavericks--cms-21434
    It worked like a charm for me a grand total of ONE TIMES. The next morning when I tried to re-connect my external, my Macbook can't seem to read the HDD anymore. Is there a way to fix this? If I go back to the Terminal and undo my previous changes, will that fix my problem or will that create more issues?
    Please help - I can seem to access the External when i plug it to my old laptop, so thankfully it isn't corrupt or broken, but I want to be able to use it on my Mac too!

    Do you think if I just upgraded to Yosemite this would solve itself?
    I rather doubt it. That little tutorial has been posted here a number of times, too. I wouldn't recommend anyone using it. Especially not on a drive that has no backup of its contents.
    You're in kind of a tight spot at the moment, being unable to copy everything off to the Windows laptop. Though technically, nothing on the external drive changed. The command you entered in Terminal changed OS X's behavior.
    What I would do is this:
    1) If the external drive is connected to the Mac and is on, dismount the drive and turn it off.
    2) Use the Terminal command again to invoke the simple text editor nano and edit the file stab to remove the line you added. Basically, what you said above to undo the changes you made. Save the file and exit nano and then Terminal.
    3) Restart the Mac.
    When the desktop is back up, turn on the external drive. It should appear on the desktop in normal read only mode. If you prefer to leave the external drive as NTFS, use a commercial package to enable read/write access in OS X. It's only $20 for Paragon's NTFS software.

  • Quick Tip at startup

    Hello,
    usually when you start up LabView (on Win) there is a window
    showing a quick tip and buttons "New VI", "Open VI" etc.
    This can be switched off such that an empty VI is presented
    when LabView is launched. Now the question:
    How do I get back to the old behaviour?
    Thanks a lot for the help, Tobias

    Tobias Vancura wrote:
    >
    > Hello,
    >
    > usually when you start up LabView (on Win) there is a window
    > showing a quick tip and buttons "New VI", "Open VI" etc.
    > This can be switched off such that an empty VI is presented
    > when LabView is launched. Now the question:
    >
    > How do I get back to the old behaviour?
    At the main menu: Edit->Preferences->Miscellaneous->Skip Navigation
    Dialog on Launch(uncheck)
    Cameron
    Cameron Dorey
    Associate Professor of Chemistry
    University of Central Arkansas
    Phone: 501-450-5938
    [email protected]

  • Quick tip: aborting the loading of a song

    I like to keep aliases to each project file I'm working on, for a given album, in a single folder. Now I must be a spaz, but about once a week I double-click on the wrong file in the list, usually missing the [intended] one above/below it by a millimeter.
    Luckily, there's a quick stop for this, if Logic isn't already running: when you realize it was the wrong file, IMMEDIATELY hold down the command key. If you catch it early enough, you will be prompted to launch Logic in Demo mode, at which point you can click the "Quit" button.
    This has saved me a lot of time, as some of my projects take minutes to open. Nothing worse than sitting through all the loading of samples & plugs just so you can Quit immediately.

    or whilst logic is active and about to launch
    hold down OPTION+APPLE and hit ESCAPE then hit ENTER/RETURN
    thats it
    its the easiest way, this also useful when applications are frozen or not responding
    and its also good when you got too many folders open and you can't be bothered to close one by one
    hold down OPTION+APPLE and hit ESCAPE then select FINDER and hit ENTER/RETURN
    done all folders close at once
    stash

  • Quick Tip: How to create editable form fields | Acrobat X Tips & Tricks | Adobe TV

    A short tip that details how to create editable form fields using Acrobat X Std. or Pro.
    http://adobe.ly/wzXkmL

    I have created a form which will be filled out by customers and sent back to me via 'submit' button. What I am trying to figure out is when we receive the filled out form, is there any way to have it as a pdf. To clarify, when the form is filled out and sent, the receiver opens the email and attached is a non-editable pdf. This way the customers information is no longer editable.

Maybe you are looking for