Photoshop 10 Will Not Print to HP Deskjet 9650

My computer is running Win 7-64. There is 96 GB free space on drive C. This is a new computer with the HP 9650 being connected for the first time.
Printing to HP Deskjet 9650 will not work for Photoshop. Printing to a HP Deskjet 970 does work.
The HP 9650 is connected with a USB cable. A test page printed from Tool Box prints as expected. Printing works from Windows Photo Viewer.
Printing of the same document that successfully printed using Windows Photo Viewer does not work from Adobe Photoshop Elements 10. Attempts to print documents from MS Word (MS Office 2010), Adobe pdf viewer, Fire Fox, or Windows Internet Explorer do not work.
The Power light on the HP 9650 blinks seeming to indicate that the print job is being processed. But printing never occurs. Sometimes "Photoshop Elements Printing: not responding" is displayed. Other times no error messages are displayed on the computer monitor. Other programs mentioned above do not display an error message.
After several minutes the Power Light is on steady and the Resume Light begins to blink a steady on and off. Pressing the Resume light switch changes nothing.
HP 9650 printer manual speaks of the meaning of the combination of Power-Light-on steady and Resume-Light-blinking. I think it is easy to eliminate the printer waiting for special media to dry as plain paper is being used and this same media was used successfully printed from Windows Photo Viewer. Printer is not out of paper. Printing job was not a banner, I/O stall is considered not a problem since the test page printed and a document can be printed from Windows Photo Viewer. Even though printer set up page was configured for "Automatic" tray selection, a manual load from rear was tried with no change. That seems to eliminate the printer waiting for a manual feed load.
The above leaves only a "media mismatch" being the problem according to the printers manual. I have gone over the printer page setup dozens of times and find no media mismatch. If there was a media mismatch it likely would be present when printing the same document from Windows Photo Viewer.

Part of the problem has been solved. Seems that the HP Deskject 9650 needs to have "spool printing" turned on. Making this change allows the printer to work.
Remaining is a problem that occurs when the print job is completed, regardless of how many pages the job included. At the end of the job the Power light blinks a steady on and off. The manual says that this means the printer is processing a job. It will do this for several minutes until a point when the power light is on solid and the Advance light blinks steadily. Turning the printer off and then back on resets it.
It appears to be waiting for someting that it never gets. Any ideas?

Similar Messages

Photoshop will not print in color

Help! Although my priner settings are set to print in color and teh preview of the document is in color, my printed version will not come out as color. My ink is newly refilled and it is solely a photoshop issue as ive tried printing color with other programs and it is fine.

What kind of color handling are you using?
Julia

My Photoshop CC 2014 will not print in Windows

My HP Deskjet 5550 is compatible with Photoshop CC. It will not print with CC 2014. I have Windows 7 Pro. Do I need another driver?

How does cc 2014 fail?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer. I have installed the software and my computer is picking up the printer but it will not print. I have restarted the computer and it still will not print.

Hello jamesettafromfl,
If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Add or remove a printer
OS X Yosemite: Printing troubleshooting
Sincerely,
- Brenden

My deskjet 3050 says it is connected to the wireless network but will not print unless wirelessly

my deskjet 3050 all in one j610 printer will not print wirelessly even tho it says it is connected to the network.
It will only print when connected by usb cable.

Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My wireless HP Deskjet 3050 printer will not print from web sites.

My HP Deskjet 3050 J610 printer will not print from web sites - it prints ok from WORD, etc. I keep getting the error message: "An unknown error occurred while printing." This problem only arises with Firefox browser.
The printer is connected wirelessly to a network and this occurs when I use a laptop on the network. It is also connected via cable to a desktop computer but there is no problem in printing from the desktop.
Any assistance would be appreciated.

That sounds as if you need to investigate to see if you were able to clear all of the paper that was causing the jam.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP 3650 deskjet will not print in Windows 7

New pc w/ Windows 7. My HP deskjet 3650 will not print PDF, Quicken, Website selections, etc.
HELP!

Did you install the driver as described here? Will the printer print a Windows test page or a file from Notepad? Do print jobs remain in the print queue? Are there any error messages?
Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

New HP Pavilion 11t-n000x360 will not print on Deskjet f4180 printer

The new Laptop recognizes the printer but will not print. No problem printing from PC s5120f . I am strictly a user, not very tech savy.

Hi @78Senior,
Welcome to the HP Forums!
I noticed that you cannot print from Windows 8.1 to your HP Deskjet f4180. I am happy to help!
I would recommend to go through this printer is offline guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8. When you get to solution four make sure to select USB and follow the steps there as well.
Hope this works!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

PSD files will not print from Photoshop CS4 (previously posted in Acrobat printing and prepress)

My questions are: Does the PSD file have the printer information encoded?
Also why has this just started to show up? My wife has work successfully under the same conditions, files moved and printed on different printers, with no problems in the past.
I (we) have been struggling with a recent problem trying to print PSD files from Photoshop CS4. (Vista 32 bit, Epson 3880 networked) When trying to print certain, but not all, PSD files I get the message: "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer." I have been in contact with Adobe support about the issue but with little in the way of positive results. I was referred to a kb link: http://kb2.adobe.com/cps/409/kb409119.html Tried all that to no avail. (The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs. You cannot open the print menu when you get this message so....?)
Other solutions are not acceptable for the work my wife is doing, editing high quality photographs for an exhibition with test prints and so on. We are under intense time pressue with four shows coming up in a very short time. The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us.
In searching the web about this problem I have come across many other people with the same problem working from different platforms and even different Adobe products. I noticed that the MAC OS seemed to cause the same problem and that there was a problem with Reader and Acrobat. In every case the problem is never solved by Adobe or anyone else and users find some "workaround". I too have found what we hope is a workaround in our contiued travels on the blogosphere, on flickr http://www.flickr.com/groups/wellington/discuss/72157621548183001/ as "...a nasty, nasty solution" but we skipped the flatten part and the GIMP part and resave the PSD under a different name.
Adobe does seem supportive but not that interested (CS4 right) but I would like to find a real solution and I think many people would benefit from it.
Anyway what I have found is that the PSD files that will not print have been printed on another printer at some time in the past. In my case the Printer was an Epson Artisan A50. The printer we are using now is the Epson Stylus Pro 3880. Even when trying to print wirelessly to the 3880 from the laptop (Was Vista, now Windows 7) that was used to edit and print with the A50, (USB connection) we saw the same error. So it seems that the printer information is somehow embedded in the PSD file (also mentioned in a Blog) and is keeping PS from seeing the printer because the same printer is not there.
Has anybody already found the fix?
I know this is a long post but I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds. Can we find a solution and fix the problem?

Just a few examples, since you ask:
Dr Craig wrote:
…The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs…
…Other solutions are not acceptable…
…The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us…
…In every case the problem is never solved by Adobe or anyone else and users find some "workaround"…
"...a nasty, nasty solution"…
…Adobe does seem supportive but not that interested (CS4 right)… b
…I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds…
That attitude, Dr. Craig. Plus the verbosity you unconscionably inflicted on your fellow forum users.
Cheers.
Wo Tai Lao Le
我太老了       (Not posting as a scientist here
                           but as a Photoshop user
                           so I'll forego listing any unrelated academic titles.)

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Photoshop CC will not print to my Epson r2400

When I try to print from PS, I get the error window "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents".
I am using a Mac OS X 10.10.2 and my Photoshop CC 2014 will not print to the Epson r2400.
I can print with Illustrator CC and all other software programs on my Mac.
I've uninstalled my Epson r2400 Drivers, uninstalled everything associated with the printer drivers and reinstalled the new drivers after emptying the trash and restarting the Mac. My problem still persists. It seems to me it is a Photoshop Software problem!

Try opening "print" while holding the spacebar; this discards any saved values. Also, make sure the correct printer it set as default. If these fail, try resetting print: Open print and hold Option. The cancel button will become a reset - click the reset button.
Benjamin

Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

I haven't been able to try this fix, but someone emailed me the below fix:
I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
It worked for me. Hope same for you.
I'm planning on trying this fix soon. Let me know how it goes for you if you get to try it before me. Will do the same. Thanks,
Chad

Photoshop will not show or print colors

photoshop will not show or print colors

Could you capture your entire screen with the layers panel open and post it here?

Photoshop 11 will not print

New installation of Photoshop 11 on Windows 7/32. On selecting File/ Print no Printer Selection drop box appears so printing fails. All other programmes installed all print normally. What is wrong?

Sorry about the omission. Yes it is Photoshop Elements 11. Also the
operating system is Windows 7/64 bit.
Any help that you can give will be very much appreciated.
Gerald Sumner.
In a message dated 02/03/2015 15:53:29 GMT Standard Time,
[email protected] writes:
Photoshop 11 will not print
created by c.pfaffenbichler
(https://forums.adobe.com/people/c.pfaffenbichler) in Photoshop General Discussion - View the full discussion
(https://forums.adobe.com/message/7243683#7243683)

Hp deskjet 3510 is online but will not PRINT

my hp deskjet 3510 is connected to wireless. printed "wireless network test results" says no probems found, but under network says "no other networks detected matching my SSID". But WILL NOT PRINT NOTHING. HELP PLEASE ASAP

Hi @kc-s
I can help! What operating system, and version do you have? Mac or Windows?
While I wait to hear from your, please use the following document and let me know the outcome; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Photoshop 10 Will Not Print to HP Deskjet 9650

Similar Messages

Maybe you are looking for