Photoshop CS6 Undo Resize bug?

I notice in CS6 (13.0.1 for Windows) if I size an image down (to let's say 200x200) and then Undo, the image is the original size again but the window frame is still 200x200 (or whatever), and I then have to either drag the frame larger or click the 'Actual Pixels' button to reframe it.  CS2 never used to do that and it's annoying as I resize a lot.  Is there anything I can do about this?

I suggest giving the Tabbed view a try for one full week.  It will seem painful at first, but stick with it.  There are advantages.
Like you, WAY back when Photoshop CS4 first came out I was loathe to use the new tabbed view, thinking that I really liked managing my documents in separate windows.  For a long time I configured Photoshop CS4 to not open documents in tabs, using the windowed view.
But I always felt that I was paddling a bit against the current - not the way Adobe would rather I use Photoshop.
As it turns out, a problem with a particular plug-in - Genuine Fractals - in which it absolutely would not work properly in windowed view but would work okay in tabbed view, caused me to make what I thought then was a temporary change.
After a week or two, against all odds, and certainly unexpectedly, tabbed view began to grow on me.  Long story short, I've never switched back.  I've used Photoshop every day since (and I mean literally every day, sometimes all day) using tabbed view.
It's not evil.  And it has some advantages.
You're probably thinking, "I'm not like that, I won't be able to stand it".
I thought that too.  Try it.
-Noel

Similar Messages

  • Does Photoshop CS6 autosharpen resized images?

    Hi all,
    I've been using Photoshop for my Photography for quite a long time and I have recently upgraded to Photoshop CS6. Whenever I resize my images in CS6, I get the feel (from looking at the images) that the application has autosharpened my images! I am quite sure about that effect because my resizing principles have remained the same since using CS5. And in CS5, whenever I resized to that same size I am resizing in CS6, I used to run the Unsharp Mask Filter to get my images look at their best! So there must be something going under the hood in CS6, or am I missing something obvious? Basically, I want to be in total control as to how much sharpness I want to apply to my resized images!!
    regards,
    Ali

    In fact Adobe added the new interpolation method Bicubic Automatic new in CS6  and Adobe change Adobe's default Photoshop's Interpolation preference setting to the new method.  However Adobe did not do a good job adding the new feature.  If you leave Photoshop Preference set to Bicubic Automatic you may run into problems if you use scripts that transform things. For if the script tries to retrieve,  change and restore your Photoshop Interpolation method Photoshop will wind up with an internal error.    There are many bugs in CS6 this is one Adobe has not address yet.
    Bicubic Sharper may work well on large un-sharpened soft images.  It does not work well on images that have been sharpened.
    Adobe scripts like the Fit Image Plug-in always uses Bicubic interpolation.   Layer Transforms prior to CS6 always used Photoshop Preference Interpolation method.  That is why the script I write retrieve this setting change it to Bicubic ,  transform then restore the Preference.   CS6 now let the user set the interpolation method for some forms of layer transforms not all.

  • Photoshop CS6 Action Player Bug Make Adjustment Layer Applied to all to be Clipped

    On Oct.  11, 2010 I received the following from Adobe Support
    Hi John,
    This is to inform you that  we have been able to reproduce the same {Photoshop Actions} behavior at our end.
    So we have logged this issue with the Product Team and Engineering Team as Bug # 2737069. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/.
    You may also log this issue directly with our product teams, through the following Feature Request/Bug Form: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&samcap=EWQQL&promoid=EWQQL
    I am closing case # 181675168, if you have any new information, please contact Adobe Technical Support referencing the case number so that we may re-open the support incident.
    Thank you for choosing Adobe.
    Thanks and Regards,
    Rajdeep Kaur
    Technical Support Consultant (Tier 2)
    ADOBE Systems
    I reopened the case for there was no fix  Adobe contacted me and told me it would be fixed is some future release of Photoshop and once again case # 181675168 was closed over my objection.
    I was vocal about Adobe poor excuse for support in forums.   I then was contacted by Jeff Tranberry of Adobe he was asked to  contact me by John Nack to see if he could change me.  We exchanged some e-mails ending with Jeff writing unfortunately, you issues has been deemed low impact and has been deferred.
    May 7, 2012  I called Adobe to find out if this bug was fixed in Photoshop for I did not want to buy CS6 if the Bug was not fixed. After about an hour on the phone talking to many Adobe employees including Adobe Support  referenced case # 181675168 log as Bug # 2737069. I was told the bug was not in CS6.  So I ordered CS6.   FedX dropped off Today I installed it only to find the bug introduced is CS4 reported in CS5 is still in CS6.  
    Adobe when will you fix this bug # 2737069????

    Case History
    Case #0181636711 Assigned Bug # 2679265
    Updated
    Thursday, September 30, 2010 10:50:22 AM PDT
    Opened
    Thursday, June 10, 2010 8:21:19 PM PDT
    Status
    Withdrawn
    Product
    Photoshop CS5
    Support contract
    Adobe Support Program
    Subject
    CS5 Action Feature Bug
    NOTES & RESPONSES
    Notes from Customer
    Thursday, June 10, 2010 8:21:19 PM PDT
    CS5 has a bug recording and playing Actions that add Adjustments layers. Old actions recorded before CS5 and actions recorded with CS5 may or may not Play/Work correctly.
    Before there was an Adjustment Panel all Adjustment Layers were added applied to all layers and you needed to clip them after the were added if you wanted it clipped. The new adjustment panel made it possible to add a adjustment layer clipped to the current layer. However a clipping parameter is not recorded by the action recorder just the type and setting are recorded.
    When a make adjustment layer step is play it is either clipped or not depending on the state of the adjustment panel's clipping icon. If it not in the same state as it was when the action was recorded it will be add incorrectly. It would also be impossible to create an action that added some adjust layer clipped and others that are not.
    I feel the is a serious bug which needs to be addressed. I believe the solution is simple and even old actions will also work.
    Two patches are needed.
    One in the Action recorder. If the step being recorded is make adjustment layer and the adjustment panel icon state is clip to layer this needs to be recorded in the action step record. If the layer is to be applied nothing extra needs to be recorded in the step record just leave it as is like actions prior to the adjustment panel.
    The second patch in the Action Player.  If the step that is about to execute is a make adjustment layer. The Player needs to save away the state of the adjustment panel icon. Then check the adjustment step record to see if it is to be clipped. If so set the adjustment panel icon to the clipping state else set it to the all layers state. Then do/call the add adjustment layer function/routine on return restore the adjustment panels icon from the saved state. Proceed to the next step.
    I have been trying to report the bug for days. Please at least acknowledge you received my bug report.
    Thanks
    JJ
    Browser: Other
    Operating System: Windows XP
    Has it ever worked? If so, what's changed? (provide comments in description field): Not Applicable
    Same results with different file?: Not Applicable
    Same results with different computer?: Not Applicable
    Recent System Hardware or Software change?: Not Applicable
    Auto responsce from Abobe will close case unless we here from you
    Notes to Customer
    Friday, June 11, 2010 5:04:44 PM PDT
    Hi John,
    Thank you for contacting Adobe Technical Support. My name is Saurabh. This is in regards to your concern posted on Adobe web support portal
    regarding an issue with Adobe Photoshop CS5.
    I understand the importance of your time in getting the issue resolved and we assure you that this will be taken care of with utmost importance. We appreciate your cooperation with us.
    I would like to inform you that we are still researching on this issue. Once we find some new information, we will get back to you.
    I apologize fore the inconvenience caused.
    We are always happy to assist you however, in future if you face any problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
    KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
    User to User Forums: www.forums.adobe.com
    To know more about Adobe products, please visit our product page:
    www.adobe.com/products
    Your technical support case number for this interaction is: 181636711
    Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
    Have a nice day.
    PLEASE NOTE:We will be waiting for your reply on this case. In case you are unable to respond we will be sending you a reminder on the 2nd day (From the day of our response to you) and then the case will be auto closed on 7th day assuming your issue is resolved. However, you can reopen your case by visiting our web support portal and we will be happy to assist you further.
    Regards,
    Saurabh Jain
    Adobe Technical Support
    Notes from Customer
    Friday, June 11, 2010 6:01:35 PM PDT
    I consulted your knowledge base and I called customer support. This bug has not been listed. Custom support had me fill out a bug report at https://www.adobe.com/cfusion/mmform/index.cfm? name=wishform which I did but that was not even acknowledged. I demonstrated the bug to customer support by sharing my screen.
    As for you forums for some reason the forum web site states my Adobe ID is disabled so I can not append or start a thread there id screen name jjmack. I created a new Adobe ID yesterday [email protected] that to seems to be disabled or I can not come up with any screen name the is availably I have tried many. Every simple or outlandish name I have entered generates the same message screen name not available. I'm at my wits end I've been using Photoshop since Photoshop version 3. Over the years it seems to get harder and harder to communicate with Adobe....
    Notes to Customer
    Saturday, June 12, 2010 1:58:07 PM PDT
    Dear John,
    Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
    As this issue would require support from a senior level and hence I am forwarding your case to the next level of support for extensive research and to find a resolution for the problem at hand. I'll get back to you once we receive a reply from the concerned department.
    Please note that the expected turnaround time for resolution to this case from next level of support is 5 business days. I apologize for any inconvenience caused.
    We are always happy to assist you however, in future if you face any technical problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
    KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
    U2U Forums: www.forums.adobe.com
    To know more about Adobe products, please visit our product page:
    www.adobe.com/products
    Your technical support case number for this interaction is: 181636711
    Thanks for contacting Adobe Technical Web Support. Have a nice day.
    Regards,
    Saurabh Jain
    Adobe Technical Support
    Notes from Customer
    Tuesday, June 15, 2010 12:03:49 PM PDT
    simpler then I first thought. Upon more investigation this is what I see.
    I skipped CS4 and when I installed CS5 I discovered a nasty bug had been introduced is Photoshop's Action facility most likely in CS4.
    Action that add adjustment Layers clipped to the current layer that step is recorded Make adjustment layer with Clip.
    Action that add adjustment Layers not clipped Step records as Make adjustment layer.
    When a step Make adjustment layer with Clip is played back that is what Photoshop does.
    When a step Make adjustment layer is played back what Photoshop does is look at the adjustment panel clipping icon state and and if it is clip to current layer Photoshop does clip the adjustment layer to the current when is should be applied to all.
    Many of the actions I have created add adjustment layer applied to all then later clip them to the current layer. These actions generate an error message if the Adjustment panel clipping icon is set to clip. Because the layer get added clipped clipping it is not available. The strange thing is the layer is clipped the way I wanted it to be. But actions I recorded where I want the adjustment to apply to all are clipped and the is no error message just wrong results.
    Notes from Customer
    Thursday, June 17, 2010 1:00:02 PM PDT
    I was told 24 hours to fix my ID. I kept myself logon this machine.now I can not even logon.
    Notes from Customer
    Friday, June 18, 2010 1:31:42 PM PDT
    My user ID is now operational again after I requested an password e-mail so I could reset my password. When I received the e-mail I was able to set my accounts password and once again participate in Adobe's forums.
    The is still no change in the status of my bug report. I would like to be able to play actions and know the will work the way there were recorded.
    Notes from Customer
    Saturday, June 19, 2010 6:56:24 AM PDT
    Create a one step action that add an adjustment layer that applies to all layers.
    Play that action with the icon in the adjustment panel is set to apply to all layers. Change the status of that icon to clip to layer and play the action again.
    You will find the first adjustment layer was added correctly apply to all layers like it was recorded the second adjustment was added clipped to layer when it should be applied to all...
    Notes to Customer
    Thursday, July 1, 2010 9:53:35 AM PDT
    Dear John,
    Thank you for contacting Adobe Technical Support. My name is sauarbh. This is in regards to your concern posted on Adobe web support portal regarding an issue with Adobe Photoshop CS5.
    I understand the importance of your time in getting the issue resolved and we assure you that this will be taken care of with utmost importance. We appreciate your cooperation with us.
    As your issue demands a real time interaction, so we are arranging a call back for you.
    Please provide the below mentioned information so that our call back team can contact you to resolve your issue:-
      1. Your Preferred Day to attend the call
      2. Your Preferred Time to attend the call
      3. Your Time Zone
      4 Your Phone Number
    The callback team works from 10 AM to 7 PM PST.
    Kindly revert to us with the above stated information so that our call back team can contact you within 24-48 working hours.
    Please note :- Our Call Back team works Monday through Friday.
    The callback team works from 10 AM to 7 PM PST.
    Regards,
    Sauarbh Jain
    Adobe Technical Support
    Notes from Customer
    Thursday, July 1, 2010 10:10:44 AM PDT
    Please provide the below mentioned information so that our call back team can contact you to resolve your issue:-
    1. Your Preferred Day to attend the call
    Mon through Friday
    2. Your Preferred Time to attend the call
    1 PM to 10 PM any time
    3. Your Time Zone
    Eastern USA Time
    4 Your Phone Number
    845-xxx-xxxx
    Notes from Customer
    Friday, July 2, 2010 8:43:30 PM PDT
    July 2 Adobe support called me once again they share my display and I demonstrated the bug for a second time. This time the stated they were recording my demo. After I demonstrated the bug they put me on hold for a while. Upon returning they informed me that there was still no circumvention or fix for this problem. They wanted to know if I was at the latest software level they were still sharing my display so I did a Photoshop Help About Photoshop to show I had the latest update Photoshop version 12.0.1. Told me they were not capable of handling this problem and would have to refer this to senior technical support that they would determine if it was a bug. What a joke Adobe junior technical support can not even recognize a bug when it has been demonstrated to them on two occasions now and also received several case update from me. Adobe you need better support personal.
    Notes to Customer
    Thursday, August 5, 2010 2:39:56 PM PDT
    Hi John ,
    Thank you for getting back to us.
    I would like to apologize for the delay in providing you a faster resolution to your issue and appreciate your patience with us.
    I would like to inform you that your issue has been logged as bug so the workaround is obviously to make sure the clip to layer is not enabled prior to running any of these actions.Also my Product Team and Engineering Team are working on this issue you can use the work around as mentioned above.
    This should resolve your issue. If it does, please let us know, however in case it does not; please revert with any new information that you might want to add which will help us in resolving your issue.
    You can also try referring to our knowledge base and User to User forums by clicking on the following links:
    Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
    U2U Forums: www.forums.adobe.com
    To know more about Adobe products, please visit our product page:
    www.adobe.com/products
    Your technical support case number for this interaction is: 181636711
    Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
    Have a nice day.
    PLEASE NOTE: we will be waiting for your reply on this case. In case you are unable to respond we will be sending you a reminder on the 2nd day (From the day of our response to you) and then the case will be auto closed on 7th day assuming your issue is resolved. However, you can reopen your case by visiting our web support portal and we will be happy to assist you further.
    Regards,
    Adobe Technical Support
    Notes from Customer
    Sunday, August 8, 2010 9:26:50 PM PDT
    Any work around does not solve my problem. Thousands have downloaded my actions. There is no way that I can contact them to make the aware of any work around. I can code around this bug but again I have no way to get the update to those that have downloaded my actions for they are free. All that is logged is the number of downloads. No registration is required so there is no way to contact the users that downloaded my actions. The problem will only be resolved when adobe updates Photoshop and fixes the problem.
    Notes to Customer
    Wednesday, August 11, 2010 1:58:23 PM PDT
    Hi John ,
    Thank you for getting back to us.
    I would like to apologize for the delay in providing you a faster resolution to your issue and appreciate your patience with us.
    I have logged this issue with my Product Team and Engineering Team as Bug #{2679265}. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/
    I am closing case#{181636711}, if you have any new information, please contact my team within 14 days, with the details, so we may re-open the support incident.
    You can also try referring to our knowledge base and User to User forums by clicking on the following links:
    Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
    U2U Forums: www.forums.adobe.com
    To know more about Adobe products, please visit our product page:
    www.adobe.com/products
    Your technical support case number for this interaction is: 181636711
    Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
    Have a nice day.
    Regards,
    Adobe Technical Support
    Notes from Customer
    Thursday, August 12, 2010 9:13:56 PM PDT
    This case should not be closed till there is a fix for this bug. How can Adobe Support close a bug report when Adobe acknowledges its a bug where Adobe Support does not provide a fix. Blowing smoke with statements like "if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site". Photoshop CS3 work correctly Adobe broke the Action Player in CS4 and its still broken is CS5. "if a fix is possible!"!!! Are you joking? What kind of support is that? Do you get a bonus for closing bug reports without fixing the bug? Does it make you look good inside Adobe. I can tell you from the outside there is a foul stench emulation from Adobe Technical Support.
    Notes to Customer
    Monday, August 16, 2010 2:30:22 PM PDT
    Dear John ,
    Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
    This issue would require support from a senior level and hence I am forwarding your case to the next level of support for extensive research and to find a resolution for the problem at hand. I'll get back to you once we receive a reply from the concerned department.
    Please note that the expected turnaround time for resolution to this case from next level of support is 5 business days. I apologize for any inconvenience caused.
    We are always happy to assist you however, in future if you face any technical problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
    KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
    U2U Forums: www.forums.adobe.com
    To know more about Adobe products, please visit our product page:
    www.adobe.com/products
    Your technical support case number for this interaction is: 181636711
    Thanks for contacting Adobe Technical Web Support. Have a nice day.
    Regards,
    Adobe Technical Support
    Notes to Customer
    Thursday, August 26, 2010 4:25:48 PM PDT
    Dear John ,
    Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
    I would suggest you to please go to through the KB document to move actions from Photoshop CS4 to CS5 given below :
    http://kb2.adobe.com/cps/860/cpsid_86020.html
    Please make sure about the loaction of actions which you created or saved in Photoshop CS4, go to that location and make sure you have all the actions there.
    Did it ever work in Photoshop CS5?
    Try to make a copy of the action that he is trying to run, remove the 'Hide' command and re-record hide in PS CS5, put it into the action, and see if that works.
    Or try making a short action along with Hide command . If this works, then something might have got changed between the version.
    KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
    U2U Forums: www.forums.adobe.com
    To know more about Adobe products, please visit our product page:
    www.adobe.com/products
    Your technical support case number for this interaction is: 181636711
    Thanks for contacting Adobe Technical Web Support. Have a nice day.
    Regards,
    Adobe Technical Support
    Notes from Customer
    Friday, August 27, 2010 8:15:11 PM PDT
    This is the reply I received from adobe support you. I want this case open till it is resolved. Your trying everything to close it unresolved. Now your giving me instructions on how to migrate from CS4 which I don't have??? Please fix bug #{2679265}.
    ++++++++++From Adobe support+++++++++
    I have logged this issue with my Product Team and Engineering Team as Bug #{2679265}. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/
    I am closing case#{181636711}, if you have any new information, please contact my team within 14 days, with the details, so we may re-open the support incident.
    +++++++++++++++++++++++++++++++++
    Notes to Customer
    Monday, August 30, 2010 5:14:11 PM PDT
    Hi John ,
    Thank you for replying back.
    I would like to inform you that that we are working in techinical support department and fixing any issues or Bug with the product is done by the developers team. As they are already working on it and we don't have any update as how much time that gonna take. If you want we can have the case as open and as soon as there is any fix for the same, you will be getting the update on Adobe website.
    I hope this will address your concern.
    You can also try referring to our knowledge base and User to User forums by clicking on the following links:
    Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
    U2U Forums: www.forums.adobe.com
    To know more about Adobe products, please visit our product page:
    www.adobe.com/products
    Your technical support case number for this interaction is: 181636711
    Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
    Have a nice day.
    Regards,
    Adobe Technical Support
    Notes from Customer
      Tuesday, August 31, 2010 7:51:16 PM PDT
    Yes leave it open
    Notes from Customer
    Monday, September 6, 2010 5:57:14 AM PDT
    Thank You
    Adobe Support Call me and told me it would be fixed in the next release of Photoshop and asked me if they could close the case. I replyed IMO that is not the proper thing to do do what you want...
    ========================================================================================== ========================
    As you can see Adobe marked the case
    Status
    Withdrawn
    by Adobe over my objection.

  • Photoshop CS6 - undo shortcut issues

    I am using Photoshop CS6 on Mac OSX 10.10. When I attempt to use the undo shortcut (Command Z), it only sometimes works. If it doesn't work, I have to manually go to Edit - Undo. Is there a fix for this?

    Just troubleshoot your system.  The problem is on your end.
    If you updated or upgraded to the foul Yosemite 10.10 after Photoshop CS6 was installed, Yosemite damaged Photoshop.  The remedy is to uninstall CS6 and re-install it, then update it to Photoshop CS6 version 13.0.6.
    Of course, it could be a faulty keyboard or who knows what else.

  • Photoshop CS6 Stand alone bugs

    I continue to have some issues with Photoshop CS6.  I was wondering if now is the time to uninstall and reinstall.  My created shortcuts will not work, now I am having problems with my Kubota Dashboard.  The Action side of the program works but the Bor-Tex, texture side encounters a problem that says this "General Photoshop error occurred.  This functionaity may not be available in this version of Photoshop.  The object"current document" is not currently available.      I know that I have used the Bor-Tex with CS6 before and all went well but now it is just another problem.
    Help

    The forums are acting strange, so first let's reboot your PC. Log in as Administrator.
    Uninstall Photoshop CS6 from the Control Panel, and checkmark Remove Preferences.
    Then to be sure, download and run the cleaner tool so we don't have any remnants interfering with your reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Look through the instructions before running the Tool and when you are comfortable with it, run the Cleaner.
    Reinstall. If you don't trust your discs (sometimes they go bad) download the Photoshop CS6 installer here.
    Download CS6 products and have your serial number ready. If this is an upgrade, the serial from a qualifying product CS4 or CS5 will be needed.
    I would also ask you to turn off any Anti-virus programs before installing, but you may wish to disconnect from the Internet before you do that. That's up to you.
    That should remove all doubt.
    Gene

  • Photoshop CS6 Extended NAG bug

    Why is my PAID for and LICENCED version of PS CS6 STILL throwing up that blasted PS Extended trial screen? I have read about this before, and I thought that it had been fixed. I OWN my PS CS6, I PAID for it. I have NEVER wanted or downloaded the Extended vesion. Why am I getting pestered about this? I DON'T WANT IT. I have re-registered my LEGAL copy of CS6 numerous times now. My version is up to day..Ver 13.0.1, I am sick of this now. I have PAID for this programme..it is mine, and I don't want Extended version.

    Hi Jeff...yes, that is the same error screen.
    Best regards
    David Clifford
    Information contained in this transmission is confidential and is intended
    only
    for the named recipient(s). The review, re-transmission, dissemination or
    other
    use of this information by persons or entities other than the intended
    recipient(s) is not authorised. If you have received this transmission in
    error, please contact the sender and delete the message from your system.
    Please note that the sender accepts no responsibility for viruses that may
    be
    contained in this transmission and it is the responsibility of the recipient
    to scan any message and attachments (if any) for viruses.

  • Photoshop CS6 Type tool bug solution for special characters move to beginning of string of text

    Just started happening and it will not go away. Tried deleting test box and start over and same issue. Bracket ) moves to beginning of string but letters are fine.

    Snowball5500 wrote:
    [...] hitting the return key only moves the cursor back to the beginning of the line I'm on.
    Are you sure leading isn't set to its minimum of 0.01 pt?

  • Possible bug in Photoshop CS6 with app.activeDocument.path.

    JavaScript running in Photoshop CS6 under OS X 10.7.5 returns the wrong result for app.activeDocument.path when the file is located on the boot drive. The result is undefined and an error message incorrectly states that the document has not been saved yet. If the file is located on a remote volume, the correct path is returned.
    To reproduce this problem, create a new file in Photoshop CS6 on a Mac. Save the file to the desktop. With the file still open, run the following script in ExtendScript Toolkit.
    // start script
    var thePath = app.activeDocument.path;
    alert(thePath);
    // end script
    Running the same script with a file located on a server volume open in Photoshop correctly returns "/path/to/file.psd" instead of undefined and no error occurs.
    This appears to be a bug in Photoshop CS6's JavaScript implementation. This problem did not exist in Photoshop CS3.
    A similar issue prevents Photoshop CS6 from saving files to the boot drive using activeDocument.saveAs.
    Has anyone else experienced this problem? If so, have you discovered an alternate method to determine the file path or save a file on the boot drive?

    Don't know if this will help much but at least you can use it to check a document's filepath without throwing an error. And maybe tell if the problem is with the Photoshop DOM.
    function hasFilePath(){// returns true/false
        var ref = new ActionReference();
        ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
        return executeActionGet(ref).hasKey(stringIDToTypeID('fileReference'));
    function getFilePath(){// returns path as a string if exists, undefined if not
        var ref = new ActionReference();
        ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
        var desc = executeActionGet(ref);
        if(desc.hasKey(stringIDToTypeID('fileReference'))) return decodeURI(desc.getPath(stringIDToTypeID('fileReference')));

  • Photoshop cs6 with OS X Yosemite, I open a new layer and i paint on it but if I use cmd Z  it does not undo fluently the most of the time.

    Photoshop cs6 with OS X Yosemite, I open a new layer and i paint on it but if I use cmd Z  it does not undo fluently the most of the time.

    Grab the plug-in posted here:  http://helpx.adobe.com/photoshop/kb/photoshop-menus-turn-white-mac.html
    That should get everything working as expected on Yosemite.

  • Hue/Saturation Adjustment Layer Bug in Photoshop CS6

    I noticed that most of the time I cannot copy a Hue/Saturation adjustment layer in Photoshop CS6. (In about a third of all cases it works, in all others I have to create a new Hue/Saturation adjustment layer).
    Hitting Command + J will cause my Mac to make an error sound.
    Option + delete also doesn't work half the time.
    Also: I cannot do a "Stamp visible" above a Hue/Saturation adjustment layer. Hitting Command + Option + Shift + E will bring another error sound.
    I have to creat a new layer, and then create a stamp visible. But half the time this doesn't work, either. Hitting Command + Shift + N will give me another error sound.
    I have to create a different adjustment layer, then an empty layer, and only then I can create a "stamp visible".
    Only Hue/Saturation adjustment layers are affected by this - but it's a true hold-up.

    What Mac? What version of OSX? That aside, your issue sounds too exotic to be a genuine bug. Sounds more like some specific combination of settings is preventing this. could be anything from blending tricks to color profiles...
    Mylenium

  • Photoshop CS6 a little 'jerky' when moving layers & resizing window (Macbook Pro Retina 650m)

    As title says, when I open Photoshop CS6 and simple make a new layer and either use the type tool, it appears to be a little Sluggish/Jerky when moving the layer around.. The same applies when resizing photoshop itself.
    I'm updated to the latest version of CS6 and have tried all the combinations in the 'Performance' section of Photoshop.
    My Macbook Pro Retina is the 3.4ghz 650m and 8GB RAM offering (OS Mavericks). It's really annoying me as even my old laptop could run it smoothly and that was an i5 and much lower-end graphics card.
    The only way I can really describe it (and i'm no tech professional) is when comparing it to silky smooth 60 fps, it looks like it's skipping frames and in term looking 'jerky'. I also use Illustrator and don't really witness the same problem with it.
    I know this may have been asked quite a bit.. But I've never found the solution.. Could anybody advise me on what it potentially could be down too? (Might I add the laptop has just had a fresh install of the OS and a fresh copy of CS6)

    You could check through the GPU FAQ for anything you might have missed
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
    You say you have tried all settings in Performance, but I wonder what your  cache levels are set at?  If more than 1, then OK.
    There's the general performance FAQ (no doubt lots of overlap)
    http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
    Is this with all image docs, or particular ones?  For instance I have been playing with using ACR to process 32bit HDR files, and it puts a huge load on the system.

  • Is there a bug in the new photoshop CS6 13.0.1.1 update? (Mac OS 10.7.5)

    Since installing the latest update of photoshop CS6 13.0.1.1, (Mac OS 10.7.5, iMac late 2009) I have noticed the following problems: when I double click on the panels bar, the panel does not collapse, I have to right click on the bar to get the panel to collapse.  Withe the curves adjustment layer, command clicking on the image does not register the point on the curve and command shift click will not set a point on the curves. this is all happening since the upgrade. Is it me or is there a bug in the update?
    Thanks in advance

    Thanks M, you're right, I do have 13.0.1, it's just for some reason ive noticed some strange behavior in photoshop, can't figure out why. I still can't get my panels to collapse when double clicking the bar and the curves adjustment layer doesn't allow me to place a point using the eyedropper tool when clicking on the image, this has just recently started after reinstalling photoshop on my imac using the creative cloud application manager

  • Anomalies Photoshop CS6 - Liquify Keyboard Brush resizing shortcuts & Selection Alt

    Using Photoshop CS6 (13.0.1) Extended with Windows 7 Pro Service Pack1 O.S.
    New Box HP Z420 Workstation
    Intel Xeon CPU E5-1603 @ 2.80 GHz
    16.0 Ram
    Issues:
    1. Intermittently on any selection - Keyboard Alt key on right of spacebar gives me the double arrow
    alt key on left of the spacebar gives me Plus with the submenus.
    2. More importantly in the Liquify (Shift+Ctrl+X) intermittently when using the brushes shortcut resize keyboard key they May on May not work ( { or } ) with the
    tools on the left side
    3 For efficiency shortcut keys are necessary - I use the allot - Fashion Industry
    4 Suggestion ?? - I had our Tech Div. check out the keyboard - no issues there

    Contact Sheet is a welcome return. So many features can be adapted. I made this a few years ago by sizing up 40 images, and turning off titles, and ‘Flatten Layers’ when making the contact sheet. It was then fairly simple to FT each layer to give some overlap, and use Layer masks for creative affect.
    It was eventually incorperated into a poster for the organisation running the event.
    Some interesting JDIs  (thanks so much for the typed list!).
    The Eye dropper changes appeal to me, and Ctrl J now working on Groups is very welcome.  Lots more there, but what worries me is that there are apparently twice as many new JDIs in CS6 as there were in CS5, which makes me think I must be missing a lot of the CS5 JDIs.  is there a list somewhere?

  • Photoshop CS6 bug: content aware is not longer working

    Seems that the latest update of Photoshop CS6 broke content aware, which now produces a black result.

    Thanks for the tip, but it does not applies to the issue I run into, as I'm using the "delete" command and not the tool (which seems to be working fine).
    Sorry for being vague.
    Also, this happens only when working in 32bit: in other bit depths the delete with content aware works fine as well.
    Steps to replicate the bug:
    open a 32bit document
    select an area
    delete use content aware
    instead of filling the selected area with content aware it does fill it with black.

  • Resize brush in the liquify filter, photoshop cs6 Mac (13.0.4)

    Hello,
    I just update to photoshop cs6 (Mac 13.0.4). Unfortunately, it's not possible anymore to resize brush in the liquify filter by "CTRL-Option-drag" like I did before in former CS6 version.
    Has anyone encountered the same problem ?
    Many thanks for your help.
    Arnaud
    Atelier Imagin'Arts

    its not ctrl+option+drag
    its ctrl+option+shift and launch your ps, delete the
    setting file when prompted.
    open your photoshop.

Maybe you are looking for

  • Display or Graphics Card Problem

    Hey all, Recently I've notice little spots apprearing discolored on the display. And by little I mean 1 pixel, but there are many of them. They usually appear on the grey frame of windows, as well when I'm watching a dvd they appear on the movie scre

  • Number of pages in new spool request

    Hello. I use FM RSPO_RETURN_ABAP_SPOOLJOB to extract lines from a given spool. Then I open a new spool with FM RSPO_SR_OPEN. Each line of the table coming out of RSPO_RETURN_ABAP_SPOOLJOB is written to the new spool. Afterwards i close the new spool

  • TRIP Workflow approval issue

    Dear All We have developed custom workflow for TRIP workflow, with single level approval of line manager. We are raising Trip request using Transaction PR05.Workitem goes to line manager for approval in SAP inbox and NWBC (SAP netweaver ) for approva

  • Timeline won't play video, only audio

    I just switched computers recently (windows 7 to Windows 7) and when I re-installed Premiere CS5.5 on my new computer the video in the timeline wouldn't play. The timeline video box just shows a media offline graphic even after all the media was reco

  • IMovie 10.0.2/Project disappeared, not editable anymore, need HELP!?

    Following problem occured on my Mac. Some days ago I created a new video with the plain/simple project template. All worked fine, I was able to upload it to Youtube and post-editing workes also fine. So, some days later (today) I wanted to reuse the