Photoshop Elements 3.0, Arbeitsspeicher freigeben
Hallo zusammen,
ich habe ein Problem mit der Freigabe von Arbeitsspeicher im Photoshop Elements 3.0 (XP). Ich arbeite mit gescannten Bildern, habe daher relativ grosse Dateien (>50 MB).
Das bei jedem Bearbeitungsschritt der Arbeitsspeicher ansteigt leuchtet mir noch ein. Das aber nach dem Schliessen einer Datei, dieser Arbeitsspeicher immer noch belegt ist leuchtet mir überhaupt nicht ein !!!
Auch das in der Hilfe beschriebene Vorgehen: Bearbeiten > Entleeren > Inhalt der Zwischenablage hat keinerlei Einfluss auf den Arbeitsspeicher !!!
Ist das ein bekannter Fehler oder muss ich noch was spezielles Konfigurieren?
Das momentane ständige Starten und Stoppen von Photoshop nach jedem Bild ist echt mühsam (notwendig obwohl 1GB RAM)
Merci für eure Hinweise
Tom
You upgrade to PSE 10.
Mylenium
Similar Messages
-
Photoshop Elements 12 Seriennummerüberprüfung
Hallo zusammen.
Ich versuche gerade bei meiner Photoshop Elements 12 Version welche ich als Download via Amazon erworben habe die Seriennummer überprüfen zu lassen.
Allerdings werde ich dort nach Eingabe meiner Adobe ID immer gebeten die Internetverbindung zu aktivieren. Diese ist jedoch aktiv!
Programm läuft unter Windows 7 64 Bit
Neustart brachte keine Abhilfe, Firewall und Virenscanner wurden schon deaktiviert jedoch auch ohne Erfolg.
Meine Systemzeit und das Datum werden automatisch synchronisiert. Sollte also auch stimmen.Did you mean this?
Adobe Photoshop Elements Version: 12.0 (12.0 (20130903.r.43239)) x32
Betriebssystem: Windows 7 64-Bit
Version: 6.1 Service Pack 1
Systemarchitektur: AMD CPU-Familie: 15, Modell: 4, Stepping: 2 mit MMX, SSE (ganze Zahl), SSE FP, SSE2, SSE3
Physischer Prozessor: 4
Prozessor-Taktfrequenz: 3000 MHz
Eingebauter Speicher: 8191 MB
Freier Speicher: 5996 MB
Für Photoshop Elements verfügbarer Arbeitsspeicher: 3255 MB
Von Photoshop Elements verwendeter Arbeitsspeicher: 70 %
Bildkachelgröße: 132 KB
Bildcache: 6
Anzeige: 1
Anzeigebegrenzungen:= oben: 0, links: 0, unten: 1080, rechts: 1920
Grafikkartennummer: 1
Grafikkarte: NVIDIA GeForce GTX 660
Treiberversion: 9.18.13.3182
Treiberdatum: 20131111000000.000000-000
Grafikkartentreiber: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Grafikmodus: 1920 x 1080 x 4294967296 Farben
Grafikkartenbeschreibung: NVIDIA GeForce GTX 660
Grafikkartenspeicher: -2047 MB
Anwendungsordner: C:\Program Files (x86)\Adobe\Photoshop Elements 12\
Pfad für temporäre Dateien: C:\Users\DESTUR~1\AppData\Local\Temp\
Der virtuelle Speicher von Photoshop Elements hat asynchrone E/A aktiviert
Arbeitsvolume(s):
Start, 119,1G, 58,1G frei
Ordner für erforderliche Zusatzmodule: C:\Program Files (x86)\Adobe\Photoshop Elements 12\Required\
Primärer Plug-In-Ordner: C:\Program Files (x86)\Adobe\Photoshop Elements 12\Plug-Ins\
Zusätzlicher Plug-In-Ordner: nicht eingerichtet
Installierte Komponenten
ACE.dll ACE 2013/02/13-10:58:57 66.529615 66.529615
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
adbeapecore.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
adbeapeengine.dll Adobe APE Engine 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOLS.dll Adobe Online Services 4.0
AdobeOwl.dll Adobe Owl 2012/06/20-18:39:56 4.1.9 78.509892
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2012/05/03-13:40:03 66.146729 66.146729
AdobeXMPFiles.dll Adobe XMP Files 2012/05/03-13:40:03 66.146729 66.146729
adobe_caps.dll Adobe CAPS 7,0,0,21
Adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
AGM.dll AGM 2013/02/13-10:58:57 66.529615 66.529615
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,35
aif_core.dll AIF 3.0 1.486530
aif_ogl.dll AIF 3.0 1.486530
amtlib.dll AMTLib 7.0.0.229 BuildVersion: 7.0; BuildDate: Sat Jul 20 2013 18:34:18) 1.000000
amtservices.dll AMTServices 4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00) 1.000000
ARE.dll ARE 2013/02/13-10:58:57 66.529615 66.529615
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
AXSLE.dll AXSLE 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/02/13-10:58:57 66.529615 66.529615
BIBUtils.dll BIBUtils 2013/02/13-10:58:57 66.529615 66.529615
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2013/02/13-10:58:57 66.529615 66.529615
data_flow.dll AIF 3.0 1.486530
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ems.dll Elements Organizer 12.0
ExtendScript.dll ExtendScript 2012/04/30-09:03:39 66.504695 66.504695
FaceDetector.dll FaceDetector 0000/00/00-00:00:00 2.0.1.1 2.0.1.1
FileInfo.dll Adobe XMP FileInfo 2013/08/08-01:01:28 66.153972 66.153972
filter_graph.dll AIF 3.0 1.486530
hydra_filters.dll AIF 3.0 1.486530
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 1.486530
image_flow.dll AIF 3.0 1.486530
image_runtime.dll AIF 3.0 1.486530
JP2KLib.dll JP2KLib 2012/11/05-11:16:34 66.246493 66.246493
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mozcrt19.dll Mozilla Custom C Runtime 8.00.0000
MPS.dll MPS 2012/10/12-13:31:12 66.521571 66.521571
MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.30319.1
MSVCP71.dll Microsoft® Visual Studio .NET 7.10.3077.0
MSVCR100.dll Microsoft® Visual Studio® 2010 10.00.30319.1
MSVCR71.dll Microsoft® Visual Studio .NET 7.10.3052.4
NPSWF32.dll
nspr4.dll Netscape Portable Runtime 4.8.2
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop Elements Editor 12.0
platform.DLL Adobe Help System 1, 0, 0, 1
Plugin.dll Adobe Photoshop Elements Editor 12.0
PSArt.dll Adobe Photoshop Elements Editor 12.0
PSViews.dll Adobe Photoshop Elements Editor 12.0
ScCore.dll ScCore 2012/04/30-09:03:39 66.504695 66.504695
ScriptUIFlex.dll ScriptUIFlex 2012/04/30-09:03:39 66.504695 66.504695
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
Tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112 -
Photoshop Elements 2.0 kann unter Windows 7 nicht geöffnet werden
Hallo zusammen
Photoshop Elements 2.0 war bei mir bisher auf einem PC mit Windows XP installiert.
Ich habe nun einen neuen PC gekauft mit Windos 7 und das Programm installiert.
Beim Öffnen kommt mir aber nun immer die Fehlermeldung:
Photoshop kann nicht gestartet werden. Der Speicher auf dem Volume,
das Windows für den virtuellen Arbeitsspeicher benutzt, ist nicht ausreichend.
Was kann ich tun?
Gruss
Sunny47http://www.paules-pc-forum.de/ppf/board4-software/board178-grafik-foto-video-und-sound/140 630-photoshop-elements-2-auf-windows-7/
-
Photoshop elements 13 - RAM Probleme
Ich habe Upgrade von Photoshop elements 11 auf 13 gemacht. Leider kann ich nun nicht mehr als 4 Fotos (RAW à 30MB) öffnen. Fehlermeldung "zu wenig Arbeitsspeicher RAM" vorhanden. Habe versucht mit den Voreinstellungen in Photoshop etwas zu erreichen und am PC (4GB RAM, 32Bit) diverse Änderungen (msconfig, page files, 4GB Grenze aufgemacht und nochmals 4GB RAM installiert, etc.).
Fragen: Braucht PE 13 tatsächlich so viel RAM oder liegt ein Problem vor?
Kann ich PE 11 löschen?
Besten Dank für kreative Vorschläge.
Nolo71This list is pretty close to all the fonts installed by adobe photoshop elements 13:
http://techinch.com/blog/fonts-included-with-photoshop-cs6-and-photoshop-elements-10
fonts included with windows or microsoft programs:
http://www.microsoft.com/typography/fonts/product.aspx
mac os x
http://en.wikipedia.org/wiki/List_of_typefaces_included_with_OS_X -
Fehlermeldung bei Photomerge (Photoshop Elements 11)
Photoshop Elements 11 - Photomerge
3 Bilder zusammenfügen - das Panorama wird angezeigt, aber nicht das komplette Bild.
Beim automatischen Ausfüllen der Kanten des Panoramas kommt die Fehlermeldung, dass nicht ausreichend Arbeitsspeicher (RAM) zur Verfügung steht, obwohl nach dem Taskmanager noch freier Speicher vorhanden ist (Installiert 3,4 GB RAM).
Was kann ich tun?????Are you able to drag a source image into the editing window or select any of the tools e.g. pencil or eraser. If not use the menu in Expert mode and go to:
Edit >> Preferences >> General
Click the button “Reset Preferences on next launch”
Then close the application and re-start.
Let us know if that makes any difference. -
Using Adobe Bridge with Photoshop Elements
I have an iMAC with iLife 08.
I take photos in RAW format with a Nikon camera.
I have been editing photos this way:
After uploading photos to iPhoto, export them as jpg to a new folder on the desktop, external HD or wherever. I open Photoshop Elements, edit the exported photo.
Then I'm stuck with my edits outside of iPhoto, unless I then import them back into iPhoto. It works, but it's cumbersome.
Today I thought I'd try a different route. I opened Photoshop Elements, and tried to use Bridge to browse photos. I can find the iPhoto library easy enough, but if I click on it, it opens iPhoto, and I'm stuck - can't open the photos in Photoshop.
I am hoping that if I do it correctly, I can save my edits directly back into iPhoto.
Any ideas?Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
How many computers can you use one copy of Photoshop Elements 11 on please?
I intend to purchase Adobe Photoshop Elements 11 for my two student children. Could you tell me if they will both be able to install in on their respective computers?
One copy of the software can be installed and activated on two computers but a) they must be used by the same person and b) not at the same.
Your intended use is not in accordance with conditions set out in the End User License Agreement (EULA)
http://www.adobe.com/products/eulas/pdfs/Gen_WWCombined-MULTI-20111031_1230.pdf
2.1.3 Portable or Home Computer Use. Subject to the restrictions set forth in Section 2.1.4, the
primary user of the Computer on which the Software is installed under Section 2.1 (“Primary User”)
may install a second copy of the Software for his or her exclusive use on either a portable Computer
or a Computer located at his or her home, provided that the Software on the portable or home
Computer is not used at the same time as the Software on the primary Computer.
You should purchase two copies of the software giving each of your children the ability to use the software on two computers. -
I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer. How can I make it find the HP printer?
Try this --
Go to the bottom of the link I gave you, and you will see
click that link and then click the chat button to talk to an Adobe agent -
I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.
Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13 -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
Colin HansenTry downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows -
Keyword and Metadata Integration throughout Adobe Modules
Thanks! That's helpful.
What I mean by "common metadata", is a unified, updated, most current metadata, which I could update in each program. That is without overwriting the metadata, but appending new keywords to the metadata I created in the previous program.
I use Bridge, then Lightroom and finally Photoshop. That's the regular workflow: Bridge for preliminary sorting and and adding some keywords; Lightroom for organizing and picking the best images; finally, Photoshop for processing. I got Photoshop Elements on trial. Doesn't work for my purposes.
I need to share and update the metadata / keywords when I go from one program into another. Can't retrieve metadata I set up in Bridge into Lightroom. Same happens with Photoshop, where I can't retrieve keywords I add in Lightroom. It's tedious to write up the keywords again.
Thanks for your efforts! -
I have hundreds of .mod files which are supported but I am unable to view them on my Adobe Photoshop Elements 11. I cant see the picture icons as pictures or see the vision when i select them? I am running the latest Windows 8.1 PC with heaps of Ram and memory. If I import the files into Premiere they play fine?
Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff -
We have been using Photoshop Elements 5.0 a lot lately to organize many photos into collections. A new problem just arose when creating a new collection.
As we named the new collection and clicked on "OK" it replaced another existing collection with the new name. The photos from the old collection were still there but now under the new collection name. This happened at least three or four times, each time a different "old" collection was renamed. Does anyone know why this would happen?
This past week we have added at least 20 new collections with no problem prior to this. Adobe actually had to shut down when this happened. Each time we reopened Adobe it would happen again randomly renaming a different "old" collection when we tried to add the new one. Any insights would be much appreciated.Thank you - that was the problem and now it is working correctly
again!
Tom Z.
>>> saurabh288 <[email protected]> 05/24/09 4:23 AM >>>
It may be that the catalog has been corupted.Try repairing the
catalog of PSE. -
Help with Photoshop Elements 7
Hello,
I have Adobe Photoshop Elements 7 running on Windows Vista. It will not open and all my photos are in it. Help
Where are the photos stored? Should I reinstall Photoshop Elements 7 if I do will I lose all my photos that are in it.
Thanks for your help.
DanEveryone
I am not sure what part of PSE will not open. It is my 72 year old mother who lives in the USA that is having the problem. I was there briely. What I saw was the blue icon on the desktop that said PSE would do nothing when you clicked on it. Same with the menu. She has all her family photos in it so she is very upset.
My understand is PSE 4 is also on the computer. I wasn't there when she installed PSE 7 so who knows what happened.
I think the first step to be done is to find the photos on the local disk.
I sent her a message telling her to look under My Documents Pictures for a Adobe folder and open it and look for the pics there.
My question is should she reinstall PSE 7 if the pictures are there? Does she have to remove it first?
Remember she is 72 years old and not good with computers at all.
Thanks for all your help!
Dan
Maybe you are looking for
-
Can't remove my credit card from account.
Why i can't remove my credit card from my account. when i remove credit card (select none)already after abt 5-10 min i check my account again my creditcardd will be appear. I try to remove from PC and on my iphone.
-
Portal runtime error in Subscription Link
Hi , I have subscription service running on our portal and notification mails are sent properly ,but there is a problem in the email links sent for subscibed document or folder. The link shown in the mail is as below <b>/irj/servlet/prt/portal/prt
-
Problems with Java 1.4.2 component on Linux RHEL
Hello, My Linux RHEL was hacked and my HDD was backed-up. Now, I need to reconfigure my RHEL environment to get software up and running again. I am required to install j2sdk1.4.2_05 as a prerequisite for Oracle Forms/Reports Services 10g on my Linux
-
My older version of macbook pro
i have come to find my donated macbook pro has version version snow leopard 10.6.3 on it presently and was told by the donator that we need to upgrade to mavericks 10.9.... something lol. anyway i already did an update request and it came back saying
-
Hi, is it possible to change idoc's? I have a idoc and must add one field -> is it possible? doese anyone know a transaction or program? thanks michael