Php intl.so unable to load [solved]

PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/intl.so' - libicui18n.so.52: cannot open shared object file: No such file or directory in Unknown on line 0
any suggestions? im at latest version 5.5.11, what package do i ned to update?
Last edited by wolfdogg (2014-05-29 04:41:50)

ok, so what im trying to do is clear out symfony cache, and run other console features, such as assetic:dump, etc... so basically its a symfony command
$ php app/console assetic:dump --watch --force
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/intl.so' - libicui18n.so.52: cannot open shared object file: No such file or directory in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/intl.so' - libicui18n.so.52: cannot open shared object file: No such file or directory in Unknown on line 0
Dumping all dev assets.
Debug mode is on.
i am thinking its something caused by a recent update, but im not sure what i updated, i did it late friday night..
Last edited by wolfdogg (2014-04-23 00:24:47)

Similar Messages

Help / Configure PHP+IIS+Oracle "Unable to load dynamic library....."

Hello,
I am a seasoned Oracle user and PHP developer and for the life of me I cannot get our development server to load the php_oci8.dll file. I have spent hours searching the web, the Oracle forums and reading the FAQs and can still not get the web server to load correctly. Below are some specs about the environment we are running:
-OS: Win2k Server SP4
-Web Server: IIS 5.0
-PHP Version: 5.1.4 PHP
-Full Oracle Admin 10gr2 client is installed on web server
When I pull up a page, I get the following warning: "PHP Warning: PHP Startup: Unable to load dynamic library 'D:\temp\php_oci8.dll' - The specified module could not be found. in Unknown on line 0 "
Here is what I have done to troubleshoot:
-'everyone' user has full access to the extension directory
-I have tried moving the php_oci8.dll to other directories and changing the extension_dir in my php.ini
-I am confident that my extension_dir in the ini file is correct
-I have tried the Oracle instant client and the full admin OEM client. The machine currently has the full OEM client installed
-All environment variables appear to be correct
I rarely post to forums but I am running out of options. If I cannot figure this out soon, we will have to go another route for resolution. Any help is tremendously appreciated.
Dave.
[email protected]
Message was edited by:
user527623

Should I explicity create environment variables named: ORACLE_HOME and NLS_LANGYep, you need to create those specific variables.
Nooooo don't use ODBC!!!!
Actually, I don't really care either way, I'm pretty much technology agnostic. Different things have different uses and you have to pick the best tool for the job. If I was a zealot I'd say "Don't use IIS" :p
~Jer

Apache 2.0: Unable to load dynamic library dbxml

Examples in dbxml run quite well when I command "php -c /etc/php.ini ..."
However, apache 2.0 error_log says:
PHP Warning: Unknown(): Unable to load dynamic library '/usr/lib/php4/dbxml.so' - /usr/lib/php4/dbxml.so: undefined symbol: db_env_ce_get in Unknown on line 0
If any dbxml objects are referenced in PHP code, httpd segfaults. I have read all the resources on web I could get my hands onto, but still haven't figured out what's wrong. Can you help me?

Hi,
thanks to you both for your help. I tried adding the following to my apachectl script:
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:/usr/local/dbxml-2.3.10/install/lib:/usr/lib:/usr/local/lib
export LD_LIBRARY_PATH
...but it didn't really help. I still don't get this. For your information:
My system is Linux 2.6.9-023stab044.11-enterprise running i686, dbxml is 2.3.10, PHP 4.3.10 in Apache 2.0 Handler.
Running ldd /usr/lib/php4/ gives
libxqilla.so.1 => /usr/local/dbxml-2.3.10/install/lib/libxqilla.so.1 (0xb7c77000)
libxerces-c.so.27 => /usr/local/dbxml-2.3.10/install/lib/libxerces-c.so.27 (0xb78dc000)
libdbxml-2.3.so => /usr/local/dbxml-2.3.10/install/lib/libdbxml-2.3.so (0xb76c5000)
libdb_cxx-4.5.so => /usr/local/dbxml-2.3.10/install/lib/libdb_cxx-4.5.so (0xb75cb000)
libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xb750a000)
libm.so.6 => /lib/libm.so.6 (0xb74e8000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb74e0000)
libc.so.6 => /lib/libc.so.6 (0xb73bc000)
libnsl.so.1 => /lib/libnsl.so.1 (0xb73aa000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7359000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xb7fee000)

[SOLVED] Unable to load Gnome Shell 3.0

Hi all,
Did a search and didnt find anything on this. I really like gnome3 while testing it on an ubuntu machine and I think with time it would be great. So I said to myself I wonder how great it would be with a nice clean arch install.
I created a fresh install and followed the directions here.....
https://wiki.archlinux.org/index.php/GNOME_3
I keep getting package not found errors in pacman though.
I uncommented the testing repo as instructed above
#testing uncommented
[testing]
Include = /etc/pacman.d/mirrorlist
no dice
pacman -Syu testing/gnome gives me a package not found error.
I thought ok maybe my mirriorlist is too old so I updated my mirrors to the latest....no dice. testing/gnome not found
So I said ok maybe I can just upgrade. I went through the normal gnome 2 install procedure and have a working gnome wm environment. So as instructed above I tried to do the upgrade.
pacman -S gnome-shell.....no dice. gnome-shell not found.
pacman -Syu always shows testing repo update first so I know thats correct.
The same thing happened to me when kde 4.6 came out. I was unable to load it from the repository. 4.5 kept loading no matter what I did.
This is only my second question on these forums and I have been using arch for 2 years so be gentle ;-) I always try to rtfm first. Then forum search.
I would just try it out in suse but suse is just sooo fat. Folks in the forums there tend to slam a guy for asking an honest question quite a lot too. ( not me but while trying to load broadcom-wl I had to do several searches and wow....) Plus I hate thier package mangement.
Thanks in advance for any advice offered,
Shakz
Last edited by Shakz (2011-04-14 02:34:58)

Inxsible wrote:
on topic though : have you enabled testing and community-testing both?
If you are on 64 bit and are using multilib, then make sure you enable multilib-testing as well. Also make sure that the order of the repos is very important. testing must be before core and extra.
Also what mirrors have you used. Try the kernel.org and see if it helps.
Ah ok thanks for the response. I am using 64bit (sry for not mentioning that) Ill try to enable multilib-testing when I get home.
For repos I have all US repos uncommented as I use powerpill. I only comment out a few that always give connectivity errors.
Testing is uncommented above core and extra.
Appreciate it Inxsible!

[Solved] Problem with Xorg, unable to load the right keymap

Hi, people,
I recently installed arch on a desktop, but there is a problem installing X: for whatever reason, Xorg seems unable to load the correct keymap (fr-latin9) and instead, loads the default one.
I can see what seems to be the problem in the Xorg logs, but I actually absolutely don't know how to solve it. Here my /var/log/Xorg.0.log
root@kgentoo keikoz # cat /mnt/tmp/var/log/Xorg.0.log
[ 9.900]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.900] X Protocol Version 11, Revision 0
[ 9.900] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 9.900] Current Operating System: Linux kdesktop 3.4.9-1-ARCH #1 SMP PREEMPT Wed Aug 15 18:59:31 CEST 2012 x86_64
[ 9.901] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7d2d3ed4-6903-4845-b70d-9462f52f4329 ro quiet
[ 9.901] Build Date: 27 August 2012 08:04:39AM
[ 9.901]
[ 9.901] Current version of pixman: 0.26.2
[ 9.901] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.901] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 26 16:32:35 2012
[ 9.950] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.967] (==) No Layout section. Using the first Screen section.
[ 9.967] (==) No screen section available. Using defaults.
[ 9.967] (**) |-->Screen "Default Screen Section" (0)
[ 9.967] (**) | |-->Monitor "<default monitor>"
[ 9.969] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.969] (==) Automatically adding devices
[ 9.969] (==) Automatically enabling devices
[ 10.002] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10.002] Entry deleted from font path.
[ 10.006] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.007] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.007] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10.007] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.007] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.007] (II) Loader magic: 0x7c8b00
[ 10.007] (II) Module ABI versions:
[ 10.007] X.Org ANSI C Emulation: 0.4
[ 10.007] X.Org Video Driver: 12.1
[ 10.007] X.Org XInput driver : 16.0
[ 10.007] X.Org Server Extension : 6.0
[ 10.008] (--) PCI:*(0:3:0:0) 10de:0141:107d:200d rev 162, Mem @ 0xcc000000/67108864, 0xd0000000/268435456, 0xcb000000/16777216, BIOS @ 0x????????/131072
[ 10.008] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.008] (II) LoadModule: "extmod"
[ 10.018] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 10.033] (II) Module extmod: vendor="X.Org Foundation"
[ 10.033] compiled for 1.12.4, module version = 1.0.0
[ 10.033] Module class: X.Org Server Extension
[ 10.033] ABI class: X.Org Server Extension, version 6.0
[ 10.033] (II) Loading extension MIT-SCREEN-SAVER
[ 10.033] (II) Loading extension XFree86-VidModeExtension
[ 10.033] (II) Loading extension XFree86-DGA
[ 10.033] (II) Loading extension DPMS
[ 10.033] (II) Loading extension XVideo
[ 10.033] (II) Loading extension XVideo-MotionCompensation
[ 10.033] (II) Loading extension X-Resource
[ 10.033] (II) LoadModule: "dbe"
[ 10.033] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 10.034] (II) Module dbe: vendor="X.Org Foundation"
[ 10.034] compiled for 1.12.4, module version = 1.0.0
[ 10.034] Module class: X.Org Server Extension
[ 10.034] ABI class: X.Org Server Extension, version 6.0
[ 10.034] (II) Loading extension DOUBLE-BUFFER
[ 10.034] (II) LoadModule: "glx"
[ 10.034] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.016] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.016] compiled for 4.0.2, module version = 1.0.0
[ 11.016] Module class: X.Org Server Extension
[ 11.016] (II) NVIDIA GLX Module 304.37 Wed Aug 8 20:16:03 PDT 2012
[ 11.016] (II) Loading extension GLX
[ 11.016] (II) LoadModule: "record"
[ 11.016] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.026] (II) Module record: vendor="X.Org Foundation"
[ 11.026] compiled for 1.12.4, module version = 1.13.0
[ 11.026] Module class: X.Org Server Extension
[ 11.026] ABI class: X.Org Server Extension, version 6.0
[ 11.026] (II) Loading extension RECORD
[ 11.026] (II) LoadModule: "dri"
[ 11.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.049] (II) Module dri: vendor="X.Org Foundation"
[ 11.049] compiled for 1.12.4, module version = 1.0.0
[ 11.049] ABI class: X.Org Server Extension, version 6.0
[ 11.049] (II) Loading extension XFree86-DRI
[ 11.049] (II) LoadModule: "dri2"
[ 11.050] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.050] (II) Module dri2: vendor="X.Org Foundation"
[ 11.050] compiled for 1.12.4, module version = 1.2.0
[ 11.050] ABI class: X.Org Server Extension, version 6.0
[ 11.050] (II) Loading extension DRI2
[ 11.051] (==) Matched nouveau as autoconfigured driver 0
[ 11.051] (==) Matched nvidia as autoconfigured driver 1
[ 11.051] (==) Matched nv as autoconfigured driver 2
[ 11.051] (==) Matched vesa as autoconfigured driver 3
[ 11.051] (==) Matched fbdev as autoconfigured driver 4
[ 11.051] (==) Assigned the driver to the xf86ConfigLayout
[ 11.051] (II) LoadModule: "nouveau"
[ 11.059] (WW) Warning, couldn't open module nouveau
[ 11.059] (II) UnloadModule: "nouveau"
[ 11.059] (II) Unloading nouveau
[ 11.059] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 11.059] (II) LoadModule: "nvidia"
[ 11.060] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.274] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.274] compiled for 4.0.2, module version = 1.0.0
[ 11.274] Module class: X.Org Video Driver
[ 11.300] (II) LoadModule: "nv"
[ 11.301] (WW) Warning, couldn't open module nv
[ 11.301] (II) UnloadModule: "nv"
[ 11.301] (II) Unloading nv
[ 11.301] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.301] (II) LoadModule: "vesa"
[ 11.301] (WW) Warning, couldn't open module vesa
[ 11.301] (II) UnloadModule: "vesa"
[ 11.301] (II) Unloading vesa
[ 11.301] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 11.301] (II) LoadModule: "fbdev"
[ 11.302] (WW) Warning, couldn't open module fbdev
[ 11.302] (II) UnloadModule: "fbdev"
[ 11.302] (II) Unloading fbdev
[ 11.302] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11.302] (II) NVIDIA dlloader X Driver 304.37 Wed Aug 8 19:54:47 PDT 2012
[ 11.302] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.303] (++) using VT number 7
[ 11.317] (II) Loading sub module "fb"
[ 11.317] (II) LoadModule: "fb"
[ 11.317] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.330] (II) Module fb: vendor="X.Org Foundation"
[ 11.330] compiled for 1.12.4, module version = 1.0.0
[ 11.330] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.330] (II) Loading sub module "wfb"
[ 11.330] (II) LoadModule: "wfb"
[ 11.331] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.347] (II) Module wfb: vendor="X.Org Foundation"
[ 11.347] compiled for 1.12.4, module version = 1.0.0
[ 11.347] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.347] (II) Loading sub module "ramdac"
[ 11.347] (II) LoadModule: "ramdac"
[ 11.347] (II) Module "ramdac" already built-in
[ 11.366] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.366] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11.366] (==) NVIDIA(0): RGB weight 888
[ 11.366] (==) NVIDIA(0): Default visual is TrueColor
[ 11.366] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.367] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.308] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 13.308] (II) NVIDIA(GPU-0): Vision stereo.
[ 13.311] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 (NV43) at PCI:3:0:0 (GPU-0)
[ 13.312] (--) NVIDIA(0): Memory: 262144 kBytes
[ 13.312] (--) NVIDIA(0): VideoBIOS: 05.43.02.64.68
[ 13.312] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 13.312] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 13.312] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 at PCI:3:0:0
[ 13.312] (--) NVIDIA(0): CRT-0
[ 13.312] (--) NVIDIA(0): CRT-1
[ 13.312] (--) NVIDIA(0): TV-0
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0) (connected)
[ 13.312] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV encoder: (null)
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): 155.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): Internal Single Link TMDS
[ 13.312] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13.312] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 13.312] (**) NVIDIA(0): been enabled on all display devices.)
[ 13.312] (==) NVIDIA(0):
[ 13.312] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 13.312] (==) NVIDIA(0): will be used as the requested mode.
[ 13.312] (==) NVIDIA(0):
[ 13.312] (II) NVIDIA(0): Validated MetaModes:
[ 13.313] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 13.313] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 13.314] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +152
[ 13.328] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 13.328] (--) NVIDIA(0): option
[ 13.328] (--) Depth 24 pixmap format is 32 bpp
[ 13.338] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 13.338] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 13.338] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 13.338] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 13.338] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 13.338] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 13.338] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 13.338] (II) NVIDIA(0): Config Options in the README.
[ 13.338] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 13.486] (II) Loading extension NV-GLX
[ 13.541] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 13.541] (==) NVIDIA(0): Backing store disabled
[ 13.541] (==) NVIDIA(0): Silken mouse enabled
[ 13.541] (==) NVIDIA(0): DPMS enabled
[ 13.542] (II) Loading extension NV-CONTROL
[ 13.542] (II) Loading extension XINERAMA
[ 13.542] (II) Loading sub module "dri2"
[ 13.542] (II) LoadModule: "dri2"
[ 13.542] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.542] (II) Module dri2: vendor="X.Org Foundation"
[ 13.542] compiled for 1.12.4, module version = 1.2.0
[ 13.542] ABI class: X.Org Server Extension, version 6.0
[ 13.542] (II) NVIDIA(0): [DRI2] Setup complete
[ 13.542] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 13.543] (--) RandR disabled
[ 13.543] (II) Initializing built-in extension Generic Event Extension
[ 13.543] (II) Initializing built-in extension SHAPE
[ 13.543] (II) Initializing built-in extension MIT-SHM
[ 13.543] (II) Initializing built-in extension XInputExtension
[ 13.543] (II) Initializing built-in extension XTEST
[ 13.543] (II) Initializing built-in extension BIG-REQUESTS
[ 13.543] (II) Initializing built-in extension SYNC
[ 13.543] (II) Initializing built-in extension XKEYBOARD
[ 13.543] (II) Initializing built-in extension XC-MISC
[ 13.543] (II) Initializing built-in extension SECURITY
[ 13.543] (II) Initializing built-in extension XINERAMA
[ 13.543] (II) Initializing built-in extension XFIXES
[ 13.543] (II) Initializing built-in extension RENDER
[ 13.543] (II) Initializing built-in extension RANDR
[ 13.543] (II) Initializing built-in extension COMPOSITE
[ 13.543] (II) Initializing built-in extension DAMAGE
[ 13.547] (II) Initializing extension GLX
[ 14.003] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.003] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.003] (II) LoadModule: "evdev"
[ 14.004] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.022] (II) Module evdev: vendor="X.Org Foundation"
[ 14.022] compiled for 1.12.3.901, module version = 2.7.3
[ 14.022] Module class: X.Org XInput Driver
[ 14.022] ABI class: X.Org XInput driver, version 16.0
[ 14.023] (II) Using input driver 'evdev' for 'Power Button'
[ 14.023] (**) Power Button: always reports core events
[ 14.023] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 14.023] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.023] (--) evdev: Power Button: Found keys
[ 14.023] (II) evdev: Power Button: Configuring as keyboard
[ 14.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.023] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.023] (**) Option "xkb_rules" "evdev"
[ 14.023] (**) Option "xkb_model" "evdev"
[ 14.023] (**) Option "xkb_layout" "fr"
[ 14.023] (**) Option "xkb_variant" "latin-9"
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 14.121] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.121] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.121] (II) Using input driver 'evdev' for 'Power Button'
[ 14.121] (**) Power Button: always reports core events
[ 14.121] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.121] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.121] (--) evdev: Power Button: Found keys
[ 14.121] (II) evdev: Power Button: Configuring as keyboard
[ 14.121] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 14.121] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.121] (**) Option "xkb_rules" "evdev"
[ 14.121] (**) Option "xkb_model" "evdev"
[ 14.121] (**) Option "xkb_layout" "fr"
[ 14.121] (**) Option "xkb_variant" "latin-9"
[ 14.122] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event0)
[ 14.122] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.122] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.122] (**) Genius Multimedia Keyboard: always reports core events
[ 14.122] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event0"
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.122] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0/event0"
[ 14.122] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 8)
[ 14.122] (**) Option "xkb_rules" "evdev"
[ 14.122] (**) Option "xkb_model" "evdev"
[ 14.122] (**) Option "xkb_layout" "fr"
[ 14.122] (**) Option "xkb_variant" "latin-9"
[ 14.123] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event1)
[ 14.123] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.123] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.123] (**) Genius Multimedia Keyboard: always reports core events
[ 14.123] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event1"
[ 14.123] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.124] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.124] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1/event1"
[ 14.124] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 9)
[ 14.124] (**) Option "xkb_rules" "evdev"
[ 14.124] (**) Option "xkb_model" "evdev"
[ 14.124] (**) Option "xkb_layout" "fr"
[ 14.124] (**) Option "xkb_variant" "latin-9"
[ 14.125] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event5)
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 14.125] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse'
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event5"
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.125] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 14.125] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 10)
[ 14.137] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4
[ 14.138] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.138] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.305] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 14.306] (II) NVIDIA(GPU-0): Vision stereo.
[ 14.306] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.306] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 14.306] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.774] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 19.774] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.774] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.774] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 19.774] (**) NVIDIA(0): been enabled on all display devices.)
[ 41.273] (II) evdev: Power Button: Close
[ 41.273] (II) UnloadModule: "evdev"
[ 41.290] (II) evdev: Power Button: Close
[ 41.290] (II) UnloadModule: "evdev"
[ 41.293] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.293] (II) UnloadModule: "evdev"
[ 41.300] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.300] (II) UnloadModule: "evdev"
[ 41.303] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Close
[ 41.303] (II) UnloadModule: "evdev"
[ 41.793] Server terminated successfully (0). Closing log file.
The error appear to be where it says
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
This file (server-0.xkm) actually does not exist on the system, BUT: it also does not exist on my others Arch installations and it works fine, without errors.
By the way: here is the keyboard-entry in the /etc/X11/xorg.conf.d/10-evdev.conf
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin-9"
EndSection
Et voilà. Can somebody help ?
Last edited by kero (2012-09-27 17:39:38)

Probably because "latin-9" doesn't exist?
# nano /usr/share/X11/xkb/symbols/fr
xkb_symbols "latin9" {
include "latin"
include "nbsp(level3)"
name[Group1]="French (legacy, alternative)";
key <TLDE> { [ oe, OE, leftdoublequotemark, rightdoublequotemark ] };
key <AE01> { [ ampersand, 1, dead_acute, periodcentered ] };
key <AE02> { [ eacute, 2, asciitilde, Eacute ] };
Try it without the dash (without the "-").
And don't forget to mark it as solved (by editing the first post).

TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

In the course of your troubleshooting to date, have you also worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

Unable to load php extension oci8.dll in wamp server windows xp

Hi this is my first post in this forum.
I have installed wamp server 2.2 on my windows xp desktop and I am trying to use oci8.dll extension to enable my oracle queries to run in my php pages. but when i enable to ext in wamp server i am getting the below error.
PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.3.13/php_oci8.dll
I have tried installing 'oracle instant client'
I have tried copying oci8.dll file from another system(where oci8.dll is succesfully loaded)
I updated the environment variable path also to point the oracle instantclient_10_2
I am still not able to vercome this error.

Your post doesn't have enough detail to identify a cause.
How did you install Instant Client? Did you set PATH?
Don't copy oci8.dll. It is too easy to get a conflicted set up.

PHP Startup: Unable to load dynamic library './oci8.so' - ./oci8.so:

I have oracle 11g, php5, and apache2 are running on server(A). One of my php application need to connect Oracle 10g on server(B). so I have to configure PHP5 and OCI8. Here is what I have done.
#env
ORACLE_SID=demo
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1
LD_LIBRARY_PATH=/u01/app/oracle/product/11.1.0/db_1/lib
TNS_ADMIN=/u01/app/oracle/product/11.1.0/db_1/network/admin
## PHP configured
#./configure prefix=/usr/local/php5 with-apxs2=/usr/local/apache2/bin/apxs --with-oci8=/u01/app/oracle/product/11.1.
0/db_1 enable-sigchild with-config-file-path=/usr/local/apache2/conf
##OCI8
./configure -with-oci8=shared,/u01/app/oracle/product/11.1.0/db_1
Then I add "extension=oci8.so" on the php.ini file (/usr/local/php/conf/php.ini)
## Here is a problem
# php phpinfo.php |grep oci
PHP Warning: PHP Startup: Unable to load dynamic library './oci8.so' - ./oci8.so: cannot open shared object file: No such file or directory in Unknown on line 0
oci8
oci8.default_prefetch => 10 => 10
oci8.max_persistent => -1 => -1
oci8.old_oci_close_semantics => 0 => 0
oci8.persistent_timeout => -1 => -1
oci8.ping_interval => 60 => 60
oci8.privileged_connect => Off => Off
oci8.statement_cache_size => 20 => 20
OLDPWD => /usr/local/apps/oci8-1.3.4
_SERVER["OLDPWD"] => /usr/local/apps/oci8-1.3.4

what is your OS?
Under Fedora 9 I used :
locate oci8.soI had to use yumex to install a bunch of php files (pecl and phpize) that had the programs to dowload and install oci8.
Another post has the instructions! Search on phpize or pecl
in /etc/php.ini put :
extension=oci8.so

PHP & JAVA (Unable to load Java Library)

Hello,
I try to execute a script ncluding the call with JAVA routines, I obtain the following message:
Fatal error: Unable to load Java Library /opt/j2sdk1.4.2_04/jre/lib/i386/libjava.so, error: libjvm.so: cannot open shared object file: No such file or directory in /usr/local/apache2/htdocs/prerequis.php on line 17
My environment is as follows:
Linux REDHAT 2.4.21, Apache 2.0.50, PHP 4.3.9, JDK 1.4.2_04
Files php.ini :
[Java]
java.class.path = /usr/local/lib/php/php_java.jar
java.home = /opt/j2sdk1.4.2_04
java.library = /opt/j2sdk1.4.2_04/jre/lib/i386/libjava.so
java.library.path = /usr/local/lib/php/extensions/no-debug-non-zts-20020429
extension_dir = /usr/local/lib/php/extensions/no-debug-non-zts-20020429
extension=java.so
If somebody has an idea??
Thanks

Shouldn't java.library.path point to java.library?

Zend optimizer and PHP startup: unable to load errors

I am finding some errors in the log for my site about zend
optimizer and PHP startup: unable to load dynamic library.
as far as I know, I have never used PHP and i have never done
anything with this zend optimizer. i need some help!
there are some references in there to some pretty strange
websites. my site is a wedding photography site!
thanks for any help.
here is the log:
[Fri Jun 06 13:33:44 2008] [error] [client 82.18.149.126] PHP
Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0, referer:
http://www.justiceandcompassion.com/
[Fri Jun 06 13:33:44 2008] [error] [client 82.18.149.126] PHP
Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0, referer:
http://www.justiceandcompassion.com/
[Fri Jun 06 13:33:45 2008] [error] [client 75.8.116.97]
Failed loading /home/vanity1/ioncube/ioncube_loader_lin_5.2.so:
/home/vanity1/ioncube/ioncube_loader_lin_5.2.so: cannot open shared
object file: No such file or directory, referer:
http://vanitytransformations.com/diamondt/index.php?option=com_fireboard&Itemid=57&func=sh owcat&catid=2&page=2
[Fri Jun 06 13:33:50 2008] [error] [client 80.82.139.143] PHP
Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0
[Fri Jun 06 13:33:50 2008] [error] [client 80.82.139.143] PHP
Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0
[Fri Jun 06 13:33:53 2008] [error] [client 62.50.73.8]
Request exceeded the limit of 10 internal redirects due to probable
configuration error. Use 'LimitInternalRecursion' to increase the
limit if necessary. Use 'LogLevel debug' to get a backtrace.
[Fri Jun 06 13:33:53 2008] [error] [client 62.50.73.8]
Request exceeded the limit of 10 internal redirects due to probable
configuration error. Use 'LimitInternalRecursion' to increase the
limit if necessary. Use 'LogLevel debug' to get a backtrace.
[Fri Jun 06 13:33:59 2008] [error] [client 200.30.148.234]
Failed loading /home/estudio5/ioncube/ioncube_loader_lin.so:
/home/estudio5/ioncube/ioncube_loader_lin.so: cannot open shared
object file: No such file or directory
[Fri Jun 06 13:33:59 2008] [error] [client 200.30.148.234]
Failed loading /home/estudio5/ioncube/ioncube_loader_lin_ts.so:
/home/estudio5/ioncube/ioncube_loader_lin_ts.so: cannot open shared
object file: No such file or directory
[Fri Jun 06 13:34:09 2008] [error] [client 82.18.149.126] PHP
Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0, referer:
http://www.otmatheist.com/
[Fri Jun 06 13:34:09 2008] [error] [client 82.18.149.126] PHP
Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0, referer:
http://www.otmatheist.com/
[Fri Jun 06 13:34:14 2008] [error] [client 82.18.149.126] PHP
Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0, referer:
http://www.otmatheist.com/2008/06/05/i-dont-want-my-kids-to-be-atheists/
[Fri Jun 06 13:34:14 2008] [error] [client 82.18.149.126] PHP
Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0, referer:
http://www.otmatheist.com/2008/06/05/i-dont-want-my-kids-to-be-atheists/
[Fri Jun 06 13:34:21 2008] [error] [client 75.8.116.97]
Failed loading /home/vanity1/ioncube/ioncube_loader_lin_5.2.so:
/home/vanity1/ioncube/ioncube_loader_lin_5.2.so: cannot open shared
object file: No such file or directory, referer:
http://vanitytransformations.com/diamondt/index.php?option=com_events&Itemid=37
[Fri Jun 06 13:34:21 2008] [error] [client 75.8.116.97]
Failed loading /home/vanity1/ioncube/ioncube_loader_lin_5.2.so:
/home/vanity1/ioncube/ioncube_loader_lin_5.2.so: cannot open shared
object file: No such file or directory, referer:
http://vanitytransformations.com/diamondt/index.php?option=com_events&Itemid=37
[Fri Jun 06 13:34:25 2008] [error] [client 38.100.8.10] PHP
Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0, referer:
http://www.google.com/search?sourceid=navclient&ie=UTF-8&rlz=1T4DMUS_enUS204US205&q=gideon +bible+ebay
[Fri Jun 06 13:34:25 2008] [error] [client 38.100.8.10] PHP
Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0, referer:
http://www.google.com/search?sourceid=navclient&ie=UTF-8&rlz=1T4DMUS_enUS204US205&q=gideon +bible+ebay
[Fri Jun 06 13:34:26 2008] [error] [client 70.241.173.162]
PHP Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0
[Fri Jun 06 13:34:26 2008] [error] [client 70.241.173.162]
PHP Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected
at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0
[Fri Jun 06 13:34:31 2008] [error] [client 70.241.173.162]
PHP Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0, referer:
http://doableevangelism.com/2008/04/16/dali-desi-and-doug-in-seattle/
[Fri Jun 06 13:34:31 2008] [error] [client 70.241.173.162]
PHP Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected
at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0, referer:
http://doableevangelism.com/2008/04/16/dali-desi-and-doug-in-seattle/
[Fri Jun 06 13:34:32 2008] [error] [client 65.214.44.28] PHP
Warning: PHP Startup: Unable to load dynamic library
'//home/offthema/sourceguardian/ixed.lin' -
//home/offthema/sourceguardian/ixed.lin: cannot open shared object
file: Permission denied in Unknown on line 0
[Fri Jun 06 13:34:32 2008] [error] [client 65.214.44.28] PHP
Warning: Zend Optimizer for PHP 5.2.x cannot be found (expected at
'/usr/local/Zend/lib/Optimizer-3.2.2/php-5.2.x/ZendOptimizer.so') -
try reinstalling the Zend Optimizer in Unknown on line 0

..... What???

Unable to load the kernel module 'nvidia.ko' [SOLVED]

After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
cat /var/log/nvidia-installer.log
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
from the one used to build the target kernel, or if a driver such as
rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
installed in this system is not supported by this NVIDIA Linux graphics
driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: rivatv was loaded and obtained ownership of the NVIDIA
NVRM: device(s).
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Last edited by wsims (2010-06-22 15:06:04)

if you used the packages from repos, the blacklist is done automatically in nvidia,
$ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
/etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
$ cat /etc/modprobe.d/nouveau_blacklist.conf
blacklist nouveau
but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
Last edited by wonder (2010-06-22 14:10:01)

[solved] xfce4 won't start, "unable to load failsafe session"

Hello, after a recent upgrade (i guess), I restarted xfce4 and I am now receiving this error message:
Unable to load failsafe session
Unable to determine a failsafe session name. Possible causes:
xfconfd isn't running (D-Bus setup problem);
environment variable $XDG_CONFIG_DIRS is set incorrectly (must include "/etc"),
or xfce4-session is installed incorrectly
While trying to restart xfce4 again.
I'm using the radeon driver for an ati card btw.
I have dbus and hal installed. I am using openbox just fine at this very moment, except that it won't logout without a ctrl-alt-backspace. So something is wrong. I wish to have xfce4 running again though.
I have a very minimal xorg.conf, with no errors in my Xorg.0.log.
Did this happen to anyone else? I searched the forum and people fixed this same error message by installing dbus, but I have dbus installed... so it's weird.
Last edited by efourseven (2009-05-08 04:38:01)

Do you run Arch64?
If so, then
# pacman -Sy dbus
This thing will install "dbus *permissive-1" which, suprisingly enough, is not a dependency of xfce4. I don't know if it's built like that on purpose, or it's just a blunder... but it would make more sense to me if XFCE4 depended on that package.
After installing that and restarting hal (which wouldn't run properly, anyway) your XFCE4 should start.
I discovered that just recently on a virtual machine (normally I run 32-bit, and there is no such issue there).
Last edited by scarecrow (2009-05-18 18:37:16)

Torrentflux 2.4 (ADONewConnection: Unable to load database driver)

I'm trying to setup Torrentflux 2.4 on my server.
I used the torrentflux PKGBUILD vom AUR: http://aur.archlinux.org/packages.php?ID=1664
I set up Apache/MySQL/PHP following the guide. PHP test script is working fine:
<?php phpinfo(); ?>
I setup a symbolic link from /srv/http to my /opt/torrentflux
ls /srv/http/
insgesamt 4
-r--r--r-- 1 root root 20 6. Mär 21:23 test.php
lrwxrwxrwx 1 root root 17 6. Mär 21:07 torrentflux -> /opt/torrentflux/
When I try to open /torrentflux/login.php in my webbrowser it says
ADONewConnection: Unable to load database driver ''
I left the default in torrentflux' config.php:
$cfg["db_type"] = "mysql"; // mysql, postgres7, postgres8 view adodb/drivers/
ls /opt/torrentflux/adodb/drivers/
insgesamt 532
-r--r--r-- 1 root daemon 20476 6. Mär 20:44 adodb-mysql.inc.php
-r--r--r-- 1 root daemon 25340 6. Mär 20:44 adodb-mysqli.inc.php
-r--r--r-- 1 root daemon 3220 6. Mär 20:44 adodb-mysqlt.inc.php
I'm pretty new to the whole LAMP stuff, so can please any1 tell me what's going wrong?

Ok, some questions:
1. Did you enable mysql in php.ini?
http://wiki.archlinux.org/index.php/LAMP#MySQL
2. Did you read / follow the torrentflux installation guide included with the installation?
(if not, check here: http://www.torrentflux.com/)
3. I have not worked with the package from AUR, the package form the official site (again, http://www.torrentflux.com/) works well for me. Did you try this?

Unable to Load Database/Unable to create database.

RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.

Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild.

Host: Unable to load application configuration + wrong install version on download

i am using 64 bit windows 7 ... when unable to playing video, it redirects me to the adobe download pages to get flash player ... the page says i am about to download flashplayer for win7 64 bit, of 9MB approximately, but the file i get has name "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) and this file just wont install it ends with error message: HOST: Unable to load application configuration ...
By google i found also file install_flashplayer11x64_mssd_aih.exe (NOTE THE NUMBER 64) ... this file runs the install, i get the final screen saying "installation completed" but after clicking the "finish" button i get an error message saying "an error occured while sending a command to the program" ...
I am just getting mad ... its 3 days i am trying to figure aout this problem ...
i also tryed files as "install_flash_player_11_plugin.exe" , "install_flash_player_11_plugin.msi" , "install_flash_player_11_active_x.exe" and "install_flash_player_11_active_x.msi" ... those files actually proceeds with the install, but at the end, the videos are still not displaying ...
When i am checking the plugins statuses in my firefox addons manager, it says Shockwave Flash is all right ...
The precedent version of flash player was working just fine, i do not understand why you must make such a mess every 2 months ...
How do i get work this?

yes, the pages is http://get.adobe.com/flashplayer/
the page says:
Adobe Flash Player 11.3.300.257 (9.36 MB)
Your system: Windows 64-bit , English, Firefox
but when i click the "Download now" button i get the file named "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) which wont start and after few seconds i get the message "HOST: Unable to load application configuration"
but finaly i solved the problem ... i just installed the file found by google on some private page "install_flashplayer11x64_mssd_aih.exe" (NOTE THE NUMBER 64)
(the page is here: http://www.ziddu.com/download/16693235/install_flashplayer11x64_mssd_aih.exe.html)
and after that i disabled the protected mode of flashplayer by adding a line in the cfg file
the howto is here: http://forums.adobe.com/thread/1018071
i must say its quite shameful one must get this torture to have movies playing on websites ... this cant happen at open source stuf, at least not for 3 days ...
and being already here and complaining, i must say also (i hope some adobe emploee will read this) i am quite disgusted (and i believe not only me) by adobes bad habit to provide other software than flashplayer, when they include mcafee antivir into the install ...
it is literally taking the user as a stupid one ...
if i will need an antivir, i will look for it ...
i just hate when some society tries to infiltrete in my comp some crap software counting on possibility that at the download i will not pay enough attention
its just ridiculous and shameful behavior

Php intl.so unable to load [solved]

Similar Messages

Maybe you are looking for