PHP5 package compiled with LDAP support?

When I check phpinfo() it appears the PHP5 package was compiled with LDAP support but for some reason when I try a ldap_connect function in php it errors with 'Fatal error: Call to undefined function ldap_connect() in ...'
Anybody have any idea what the problem is?
Thanks,
Craig

I'm not sure about the php.ini thing, I've combed through it looking for idea's as well, but the only ldap string in the whole file is this 'extension=php_ldap.dll' and that doesn't apply to Arch.
Also at http://www.php.net/ldap it talks about requirements etc and I'm almost thinking that the php5 package is not compiled with ldap even though when I do a phpinfo() it does show '--with-ldap' in the compile settings.

Similar Messages

[SOLVED] haskell - citeproc-hs was not compiled with bibutils support

Hi all,
since I have not yet been able to get help in arch-haskell's IRC channel, I am posting here, maybe someone has an idea:
I am using pandoc which I have retrieved along with all its dependencies from the haskell binary repository. But when I try to process a bibliography, I get an error message from citeproc-hs:
pandoc: citeproc: Bibliography format not supported.
citeproc-hs was not compiled with bibutils support.
Supposing that the error message is not misleading, I wonder how do I recompile with bibutils support then?
Googling gave some results concerned with haskell-hs-bibutils, which seems to have been on the haskell repo earlier but is there no longer, so I installed it from AUR (modifying the PKGBUILD to accept haskell-syb>=0.3 instead of =0.3).
Reinstalling haskell-citeproc-hs did not help.
Next I tried with cloning habs the haskell repo (as is described here). Since I could not find any switch in haskell-citeproc-hs's PKGBUILD that would disable bibutils support I directly issued
./makeahpkg -- haskell-citeproc-hs
but the resulting package gives the same error as the one from the repo.
Should I have taken extra steps to build/install haskell-hs-bibutils also in the habs chroot? Or anything else?
TIA,
Andreas
Last edited by awagner (2012-08-01 08:36:06)

awagner wrote:Should I have taken extra steps to build/install haskell-hs-bibutils also in the habs chroot? Or anything else?
Yes, it seems this was the problem. Besides cloning habs, I now went on to manually copy the necessary files of bibutils-dynamic and haskell-hs-bibutils from AUR into the local HABS tree, modify dependencies in haskell-hs-bibutils, haskell-citeproc-hs and haskell-pandoc (an additional dependency on haskell-hs-bibutils in haskell-citeproc-hs, in the other cases only change of version numbers).
Then
./makeahpkg -c -- bibutils-dynamic haskell-hs-bibutils haskell-citeproc-hs haskell-pandoc
produced four packages which I could install and now the error is gone and I can turn to debugging my document and bibliography files

Is Muse compiled with DSSI support?

Is Muse compiled with DSSI support?
I ask because it is not able to recognise my DSSI instruments (only its internal ones).

I think that the dynamic loader would then search for libvdpau.so, and not find it on systems without nVidia-drivers, which causes the program to not load Also, it's not very KISS to have several different packages for different needs in the main repos. That's what AUR/ABS's for.

Kaffeine embedded crash fixed when compiled with libxcb support?

From kaffeine website:
Embedded Kaffeine crash fixed.
This long standing bug is now fixed in current svn ...
In order to make it possible, we have ported Kaffeine and xine to xcb (a thread-safe replacement for xlib).
You can give it a try right now:
1) install libxcb=>1.0
2) install current xine-lib cvs (it contains xcb based video output plugins: xshm and xv)
2) install current Kaffeine svn
Notes
a) Both xine-lib and Kaffeine have to be compiled with xcb support (autodetected, check configure results).
b) Kaffeine will still work with xlib based video out plugins if compiled without xcb (but then, no fix!)
From 0.8.4 changelog:
* xine-part: support for xcb. Requires libxcb 1.0 and xine-lib 1.1.5. Fixes several issues.
Any reason not to incorporate this? If it lives up to it's promises It could mean kde users only need ONE media player :-) (I have 2 installed just to get DVD menus and embedding in konqueror without crashing)
Any thoughts?
Cheers,
Steve.

I felt that the laptop was possibly overheating and that is why I started down the road to call "customer support", thinking that a fan went out or there was damage to hardware due to it over heating. And that road got me no where in a fast manner, and two "techs" telling me it was a software related issue and that I needed to reformat the laptop (twice) and re-install to factory settings. Even when I did this, it still had the issue and they again told me that it was software related when there was no software on the computer except for Windows 7. The only thing that customer support helped me with is the knowledge of next time I buy a laptop, but Dell or any other laptop besides a Toshiba. That is too bad.
Anyway, I tried to continue on with my thinking of a possible over heating issue, so I blew air into the vents and fins of the laptop. A lot of dust came out. I kept blowing air into the vents until no more dust came.
My wife had to re-install everything again to her laptop after I got the major items re-installed. She has been running it for the last day or so with no issues. We hope that this was the issue. I know she enjoys the laptop when it was running well.
I guess we will see how it goes.

Packages compiled with debug info

Hi,
How do we check if a package has been compiled with DEBUG information or not?
The package could have been compiled like this:
ALTER PACKAGE pk1 COMPILE DEBUG
Is there any table that I can check?
Thanks in advance.
Sanal Krishnan

Is this a 10g feature?It seems only user_plsql_object_settings is new in 10g.
all_plsql_object_settings is available in 9i:
michaels> select * from dict where table_name like '%PLSQL%'
TABLE_NAME                     COMMENTS
ALL_PLSQL_OBJECT_SETTINGS      Compiler settings of stored objects acce
                               ssible to the user
1 row selected.
michaels> select name, type,plsql_debug from sys.all_plsql_object_settings where owner = 'SYSTEM'
NAME                           TYPE         P
DEF$_PROPAGATOR_TRIG           TRIGGER
REPCATLOGTRIG                  TRIGGER
michaels> select * from v$version
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE     9.2.0.8.0     Production
TNS for HPUX: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production

Why mplayer in i686 repository is not compiled with vdpau support?

I was kind of surprised when I find out that mplayer in i686 repository is not compiled with vdpau,
since it is in x86_64 repository,
I know I could enable vdpau easily by compiling the package myself,
but wouldn't it be even better if it is built-in in the official binary?

I think that the dynamic loader would then search for libvdpau.so, and not find it on systems without nVidia-drivers, which causes the program to not load Also, it's not very KISS to have several different packages for different needs in the main repos. That's what AUR/ABS's for.

[solved] Error compiling wpa_supplicant with broadcom_wl support

Hello friends.
I'm using the broadcom_wl driver for my bcm4312 card in my Dell XPS m1530 laptop. Unsecured wifi is tested and works fine.
I need to use wpa_supplicant to connect to my university's wifi. The core package for wpa_supplicant is not compiled with broadcom support. I tried using the generic wext option, but I get
Trying to associate with 00:11:92:90:de:e1 (SSID='restricted.utexas.edu' freq=2462 MHz)
ioctl[SIOCSIWAP]: Device or resource busy
Association request to the driver failed
It looks like the generic wext option doesn't work for the bcm4312.
So I tried to compile wpa_supplicant with broadcom support using ABS with this package: http://aur.archlinux.org/packages.php?ID=18511 from AUR. I enabled broadcom support in the config file and pointed it toward my local copy of wlioctl.h.
Unfortunately, build() dies with
In file included from /var/abs/local/broadcom/src/src/include/proto/802.11.h:39,
from /var/abs/local/broadcom/src/src/include/wlioctl.h:38,
from ../src/drivers/driver_broadcom.c:34:
/var/abs/local/broadcom/src/src/include/proto/wpa.h:109:1: warning: this is the location of the previous definition
../src/drivers/driver_broadcom.c: In function 'wpa_driver_broadcom_event_receive':
../src/drivers/driver_broadcom.c:229: error: 'wl_wpa_header_t' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:229: error: (Each undeclared identifier is reported only once
../src/drivers/driver_broadcom.c:229: error: for each function it appears in.)
../src/drivers/driver_broadcom.c:229: error: 'wwh' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:240: error: expected expression before ')' token
../src/drivers/driver_broadcom.c:242: error: 'WL_WPA_ETHER_TYPE' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:244: error: 'wl_wpa_snap_template' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:250: error: 'WLC_ASSOC_MSG' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:251: error: 'WL_WPA_HEADER_LEN' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:271: error: 'WLC_DISASSOC_MSG' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:275: error: 'WLC_PTK_MIC_MSG' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:280: error: 'WLC_GTK_MIC_MSG' undeclared (first use in this function)
../src/drivers/driver_broadcom.c: In function 'wpa_driver_broadcom_get_scan_results':
../src/drivers/driver_broadcom.c:465: error: 'wl_bss_info_t' has no member named 'channel'
../src/drivers/driver_broadcom.c: In function 'wpa_driver_broadcom_associate':
../src/drivers/driver_broadcom.c:573: error: 'WLC_GET_WEP' undeclared (first use in this function)
../src/drivers/driver_broadcom.c:576: error: 'WLC_SET_WEP' undeclared (first use in this function)
make: *** [../src/drivers/driver_broadcom.o] Error 1
==> ERROR: Build Failed.
I don't know c. Can someone decipher this error for me?
Thanks in advance.
EDIT: There are multiple versions of wlioctl.h floating around. I eventually got this to work with the version included with the wrt54g tarball. BUT, wpa_supplicant still had driver problems when being run with the -D broadcom option.
I eventually got this working with ndiswrapper and instructions found here: https://help.ubuntu.com/community/WifiD … y_No-Fluff
Pay special attention to the instruction:
"This Chipset/PCI ID is the correct/reliable way to identify the device: Any other labels can be misleading (e.g., notice that both the '14e4:4311 (rev 02)' and '14e4:4319 (rev 02)' call themselves a "BCM4311 (Rev 02)", even though they are different devices)."
Download the driver that matches the output of
lspci -n | grep '14e4:43'
Anyway, wpa_supplicant still gave me driver troubles when using the -D ndiswrapper option. However, it works well with -D wext.
Tldr;
-Your bcm4312 may actually be a BCM4310 (rev 01).
-Use ndiswrapper with this driver: http://myspamb8.googlepages.com/R174291-pruned.zip
-use wpa_supplicant with the -D wext option.
Last edited by BurtHawk101 (2008-11-05 06:28:04)

falconindy wrote:
mkinitcpio needs to refuse to run without /dev mounted to avoid errors like this.
mount -t devtmpfs devtmpfs /dev
Thanks falconindy, works great now.

[SOLVED]compile error w3m 0.5.3 with mouse support

Hi Friends. i'm Trying to compile w3m test based browser with mouse support. I donwloaded the latest source available from sourceforge website.The ./configure runs correctly and produces no errors. but when I run make, it gives me the following error. (other users on internet say that they have compiled it flawlessly).The error message is:
gcc -I. -I. -g -O2 -I./libwc -DHAVE_CONFIG_H -DAUXBIN_DIR=\"/usr/local/libexec/w3m\" -DCGIBIN_DIR=\"/usr/local/libexec/w3m/cgi-bin\" -DHELP_DIR=\"/usr/local/share/w3m\" -DETC_DIR=\"/usr/local/etc\" -DCONF_DIR=\"/usr/local/etc/w3m\" -DRC_DIR=\"~/.w3m\" -DLOCALEDIR=\"/usr/local/share/locale\" -c -o main.o main.c
In file included from html.h:10:0,
from fm.h:39,
from main.c:3:
istream.h:23:8: error: redefinition of ‘struct file_handle’
In file included from /usr/include/fcntl.h:32:0,
from istream.h:14,
from html.h:10,
from fm.h:39,
from main.c:3:
/usr/include/bits/fcntl.h:251:8: note: originally defined here
main.c: In function ‘main’:
main.c:836:23: error: void value not ignored as it ought to be
main.c: In function ‘getChar’:
main.c:2264:5: warning: passing argument 1 of ‘wtf_parse1’ from incompatible pointer type [enabled by default]
In file included from fm.h:44:0,
from main.c:3:
./libwc/wtf.h:71:19: note: expected ‘wc_uchar **’ but argument is of type ‘char **’
make: *** [main.o] Error 1
Also, can you tell me which option to use to compile with mouse support? Thanks.
Last edited by Pranavg1890 (2012-10-11 18:12:35)

i tried enabling and disabling the mouse support. but makepkg give me this error:
config.status: creating po/Makefile
gcc -I. -I. -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -I./libwc -DHAVE_CONFIG_H -DAUXBIN_DIR=\"/usr/lib/w3m\" -DCGIBIN_DIR=\"/usr/lib/w3m/cgi-bin\" -DHELP_DIR=\"/usr/share/w3m\" -DETC_DIR=\"/usr/etc\" -DCONF_DIR=\"/usr/etc/w3m\" -DRC_DIR=\"~/.w3m\" -DLOCALEDIR=\"/usr/share/locale\" -c -o main.o main.c
main.c: In function ‘main’:
main.c:836:23: error: void value not ignored as it ought to be
main.c: In function ‘getChar’:
main.c:2264:5: warning: passing argument 1 of ‘wtf_parse1’ from incompatible pointer type [enabled by default]
In file included from fm.h:44:0,
from main.c:3:
./libwc/wtf.h:71:19: note: expected ‘wc_uchar **’ but argument is of type ‘char **’
main.c: In function ‘handleMailto’:
main.c:2953:11: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
main.c: In function ‘editScr’:
main.c:2661:11: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
main.c: In function ‘editBf’:
main.c:2638:11: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
main.c: In function ‘execsh’:
main.c:2091:8: warning: ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result]
make: *** [main.o] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Someone please help me. I need mouse support for this browser very badly. Maybe a programming expert can tell me what changes should i do to source code or what is wrong?

Attempting to install a compiled 8.6.1 package fails with "NI Variable Engine (higher version already installed)

This is long as there are a collection of details I thought would be useful. Please bear with me.
I have a VI compiled with LV 8.6.1 PDS. The installer ran on the development machine and it works fine there (WinXP SP3).
Was handed a laptop (another WinXP SP3) that already had LV 7.0 (academic) on it. Someone was fiddling with an old version of LV. OK.
Wanted to uninstall 7.0 so there would be a clean field for the program compiled under LV 8.6.1.
So: Start --> Control Panel --> Add/Remove Programs and uninstalled "National Instruments Software". That went smoothly. It wanted a reboot. Fine.
Ran the setup program in my package, the one I'd wanted to install. No errors. The following installers were included with the Build:
* NI LabVIEW Run-Time Engine 8.6.1
* NI Measurement & Automation Explorer 4.5
* NI DAQmx 8.8
By the way, this generated an installation package of "almost" 900 megabytes.
Connected the hardware (one ethernet-based, another RS-232 based). Started the program, "EDGAR2".
First error:
Unable to locate the LabVIEW Run-Time Engine.
EDGAR2 requires a version 8.6.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of EDGAR2 to correct this problem.
(This is Error1.JPG, attached).
A check of C:\National Instruments\Shared\LabView Run-Time\8.6 shows that there is only one item in that directory: a sub-directory named "errors". That's it. If the executable is looking for something in the 8.6 directory, well, there's nothing there.
Uninstalled EDGAR2 using the Control Panel. Reinstalled. Same problem.
Downloaded the standalone LabVIEW Run-Time 8.6.1 installer, Standard Edition, from NI's site, unpacked, and ran the setup.exe from that package.
There is one box with a green checkmark in it: NI Variable Engine .
Click Next. Up pops a pane and Error2.JPG is attached. It won't continue because the "detected" version of Variable Engine is of a higher revision.
The "Next>>" button is grayed out.
Uninstalled EDGAR2 again. But there was no entry in the Windows uninstall panel for uninstalling any National Instruments software. This raised a flag in my mind and NI Support was telephoned.
With the Support Guy running Google searches for relevent topics (I'd done some of that, too), a number of things were tried.. ending up with deleting everything in C:\Program Files\National Instruments while in Safe Mode, everything in C:\Documents and Settings\All Users\Application Data\National Instruments, going through the Windows Registry with REGEDIT, uninstalls and attempted reinstalls. Nope, nothing worked. That defective Variable Engine seems glued into the system
The application can't find the 8.6.1 run-time because it doesn't exist. It doesn't exist because both the standalone and built-in installers see a Variable Engine of a higher version installed and apparently won't install over it. There is no uninstall for any NI software in the Windows Control Panel --> Add/Remove pane and so I can't seem to get rid of this Variable Engine.
At this point, the Support guy says, "Time to reimage your computer. Call us for anything else.. you know we're here for you."
This is the first trouble I've had installing a compiled VI. All other packages built with 8.6.1 PDS just slid right in.
There's been a LOT of software installed on the target over the years and going on the proverbial "scavenger hunt" to locate all of the installation disks will be a time-consuming task (a week is a conservative estimate). Is there a solution to this problem? Where are the installers "looking" for the Variable Engine revision level? Is there a specific Registry key that can be adjusted?
Went looking through the WinXP Event log. No errors are popping up there.
Your time is appreciated.
Mark
Attachments:
Error1.JPG ‏17 KB
Error2.JPG ‏28 KB

Hi Mark,
I'm sorry to hear your having trouble installing the LabVIEW 8.6.1 Run-Time Engine. It sounds like there could be a few problems going on here. First, you should have more options when installing the Run-Time Engine than just the Variable Engine. If you uncheck the Variable Engine, does it try to install anything? Second, not being able to install the Variable Engine suggests that there may be something wrong with your registry. If you removed all National Instruments keys when cleaning the registry, then this shouldn't be a problem.
At this point, there are a couple things I would suggest. Unfortunately, the best solution would probably be to reformat. It sounds like some low level parts have been corrupted and this would be the quickest way to fix everything for sure. Other than that, you can try installing the full 8.6.1 Development System on the computer. This will install the Run-Time Engine on the computer. You can simply not activate the software, which means you won't be able to edit anything. You will be able to run the program, though.
Jared S.
Applications Engineering
National Instruments

[solved] Build of php package with mssql support - checking my process

Since the straight 'php' package doesn't support mssql, I'm in the process of trying to build and install an updated copy that has that switch turned on. The information I've seen out there seems pretty straight forward, but my results are odd, so I'm checking my work here...
I did an abs to pull down the tree (had to use abs -t), created an abs directory under my root home dir, then copied the extra/php branch to /root/abs/php
Edit the PKGBUILD adding the line
--with-mssql \
to the end (line 130) of the list of phpextensions= that is later used in the ./configure line of PKGBUILD. Then from the same directory, run makepkg --asroot -f
then remove the old php with pacman -Rd php
then install the new php with pacman -U ./php-5.3.2-6-i686.pkg.tar.xz
Then modify my php.ini for mssql support
and then get the wierd results:
- php reports it does not have mssql support. phpinfo() shows the ./configure command line and the --with-mssql piece is not there.
- a php -m reports "PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mssql.so' - /usr/lib/php/modules/mssql.so: cannot open shared object file: No such file or directory in Unknown on line 0
A search for mssql.so comes up empty on the system. I am not sure why it isn't there, but I wanted to make sure I was doing the above steps first before running down the php code specific rabbit hole trying to find mssql.so in case it is under a different name in the source and then compiled out to be mssql.so in the end result.
(note - I have freetds on the system along with it's source files from the package, and no mssql.so in there either)
Thanks,
-Jeff
Last edited by jethro (2010-09-22 19:33:55)

Did all that, no real errors, only a few warnings, but did figure out what was going on and will put it here in case anyone searches on this and is in the same boat. In search of mssql.so I found this web page http://howtogetitworking.com/2008/02/26 … p-on-unix/ which talks about needing to build the mssql.so file yourself. Specifically, going into src//ext/mssql/ then
# cd /uploaded_path/mssql/
# phpize
# ./configure
# make
# make install
and suddenly I have mssql.so, restart apache and I have mssql support. I wasn't expecting to have to compile a subsection of php after doing a package build with the switches I wanted, but I guess that's what I had to do.
Thanks,
-Jeff

OpenSSH 4.4p1 packages with PAM support for Solaris 9, 10

As mentioned in a previous post* , I've compiled OpenSSH packages with PAM support for Solaris 9 and 10. They've since been updated to version 4.4p1, and are compiled against a static zlib (1.2.3) and OpenSSL (0.9.8c). You can find them here:
http://firewallworks.com/downloads/unsupported/Solaris-sparc/
Regards,
Greg
* http://forum.sun.com/jive/thread.jspa?threadID=103378&tstart=105

Yes, zlib 1.2.3 is a requirement. In facts, zlib mentions a 2005 vulnerability fix but I found no matching patch in sunsolve. See
http://www.kb.cert.org/vuls/id/JGEI-6E7RC3
I have been wandering whether to replace the official zlib. Linking statically is probably a better idea. Thanks

Emacs compiled with S/MIME support in Arch Linux

I have been trying without success to get Emacs 23.2 and Gnus 5.13 in Arch Linux to generate messages signed with S/MIME certificates, which are frequently used by the U.S. government and by businesses. My configuration works fine on my Ubuntu workstation (as opposed to my Arch Linux laptop). The error I usually get is "smime-sign-buffer is void." I am beginning to wonder whether Emacs/Gnus on Arch is compiled with S/MIME support. Does anyone happen to know, or has anyone had any success getting signatures with S/MIME to work on Arch?
Thanks,
Bill Day

I can't help you with emacs, but to find out what options the packages in the repos are compiled with you want abs. With abs you can then use the same PKGBUILD that was used to make the official packages, and change only what you need to change, as opposed to starting from scratch when compiling.
A few useful links:
http://wiki.archlinux.org/index.php/Creating_Packages
http://wiki.archlinux.org/index.php/Makepkg

Compiling fvwm-patched with XFT support

I'm pretty new to Linux. Only spent 2 weeks playing with a minimal Ubuntu install before jumping over to Arch a couple months ago.
I'm compiling/installing fvwm-patched from the AUR. I'm using yaourt and I'm even editing the PKGBUILD to use the latest fvwm source, and dropping a patch that is no longer needed due to changes in fvwm itself. The problem is the resulting compiled fvwm doesn't have XFT font support.
I found this in an FAQ:
cf13. I compiled FVWM from source, and now none of my XFT fonts are working. They work fine under other window managers.
You're an idiot. You probably didn't compile in XFT support. FVWM needs this to render XFT fonts. If the command:
fvwm --version | sed -n 2p
... doesn't have "XFT" listed in its options, then install the XFT header files (libxft-dev, if you're on Debian) and recompile FVWM.
I'm not sure how to get these xft header files on Arch. I already have libxft installed and I can't find anything in packages or AUR that looks the equivalent of libxft-dev.
Anyone know which direction to point me in?
Cheers.

As far as I understand it fvwm-devel is a regular package (not from AUR) and is thus pre-compiled and has XFT support. (yes it works)
The patches work fine as far as I can tell. I'm not having any issues with them. I'm just not sure where to get the "xft header files" mentioned in the FAQ I quoted.
Last edited by greatant (2011-02-13 12:20:41)

IdcApache2Auth.so Compiled With Large File Support

Hi, I'm installing UCM 10g on solaris 64 Bit plattform and Apache 2.0.63 , everything went fine until I update configuration in the httpd.conf file. When I query server status it seems to be ok:
+./idcserver_query+
Success checking Content Server idc status. Status: Running
but in the apache error_log and I found the next error description:
Content Server Apache filter detected a bad request_rec structure. This is possibly a problem with LFS (large file support). Bad request_rec: uri=NULL;
Sizing information:
sizeof(*r): 392
+[int]sizeof(r->chunked): 4+
+[apr_off_t]sizeof(r->clength): 4+
+[unsigned]sizeof(r->expecting_100): 4+
If the above size for r->clength is equal to 4, then this module
was compiled without LFS, which is the default on Apache 1.3 and 2.0.
Most likely, Apache was compiled with LFS, this has been seen with some
stock builds of Apache. Please contact Support to obtain an alternate
build of this module.
When I search at My Oracle Support for suggestions about how to solve my problem I found a thread which basically says that Oracle ECM support team could give me a copy IdcApache2Auth.so compiled with LFS.
What do you suggest me?
Should I ask for ECM support team help? (If yes please tell me How can I do it)
or should I update the apache web server to version 2.2 and use IdcApache22Auth.so wich is compiled with LFS?
Thanks in advance, I hope you can help me.

Hi ,
Easiest approach would be to use Apache2.2 and the corresponding IdcApache22Auth.so file .
Thanks
Srinath

Problem packaging AIR app with NativeProcess support!?

My AIR packaged AIR app doent work with NativeProcess
when I package it like
<supportedProfiles>extendedDesktop desktop<supportedProfiles>
or
<supportedProfiles>desktop extendedDesktop<supportedProfiles>
But when I use just <supportedProfiles>extendedDesktop<supportedProfiles>
Packager complains with Error 306!!
What is that suppose to mean?
Help please
I'm using FB4,SDK 4.1

Are you packaging your application as a native application (.exe or .dmg)? I believe applications with extendedDesktop support (and nativeprocesses) can only be packaged as native applications.

PHP5 package compiled with LDAP support?

Similar Messages

Maybe you are looking for