PI 7.1 Architecture and configuration

HI Friends
I am a begineer to learn in PI..XI area..
I want to learn and grow in PI..XI as a basis consultant..with my business needs..
Your inputs and direction in this concern are valuable and appreciated.
Thanks and Regards
Pooja

Hi ,
its really good idea to move XI bcz there is a good demand for basis+xi cunsulatants,
but you have to learn xi basis, become expertise in Netweaver Admin then start learning XI.
first read XI3.0 the move to PI7.1, u will find ton's of documnuts about XI search IN SDN and find below link u wl find all TBIT docs.
http://www.sap-xi.com/sapxi-tbit-series-free-download.html.
Regards,
Raj

Similar Messages

OWB - Installation Architecture and Infrastructure configuration

I thought it is a good idea to throw this out to the OWB community to see what your thinking is.
This is my first project; we are currently on detail design. The Client requests a document that covers the following details.
Architecture and Infrastructure configuration for OWB - Oracle Warehouse Builder – which is to be targeted at an ehosting data centre.
•     What is the best practice either from Oracle
•     Is it best to go for a 2Tier or 3Tier architecture
Infrastructure being of interest is:
•     The use of Application server and web service for giving visibility and access to the runtime / design repository via the repository browser.
•     The applicable application service i.e.: Control Centre Service
Can this distributed over multiple servers if you application server differs from you database server.
•     Do you have any information similar to this you compiled in the past that I can use
•     Or is there any source you can direct me to get this kind of information

Can this distributed over multiple servers if you
application server differs from you database server.This is not an OWB question. This is a database question. You are asking something like 'can I run Oracle with Apache with Tomcat?'. Simple answer is yes. Compex answer is load balancing?
Cheers,
Donna

PI 7.1 Architecture and components

Hi SDNers,
I would like to know the architecture and components of SAP Process Integration 7.1.
Your inputs are valuable.
Thanks in advance,
-Saravanan.

Hi Saravanan,
Also find the below links for PI 7.1
1. SAP NetWeaver Process Integration 7.1-Overview:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ed3b8c-698c-2a10-fbaf-b1df0c82fc8a
2. SAP NetWeaver Process Integration 7.1-Overview of New Capabilities:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
3. Point-to-Point Direct Connection Design and Configuration in SAP using NetWeaver Processing Integration 7.1:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00bbb77-75bc-2a10-6b9a-a6f8161515a6
4. Demo for Design and Configuration of Direct Connection in SAP NetWeaver PI 7.1:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0b9885b-5ca9-2a10-6b8e-abe9ef432a23
5. SAP NetWeaver SOA Middleware u2013 Adapters and Adapter Modules for SAP NW PI 7.1:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0205c42-5e86-2b10-b183-afc655b07f3f
6. Please refer the following link for XI Architecture:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c75ee690-0201-0010-7baf-af868a642918
7. E-Class on XI Architecture refer this link:
https://www.sdn.sap.com/irj/scn/subscriptions/content?rid=/media/uuid/405c476c-b20a-2a10-7ba0-be760136c298
Also you can search in SDN, Lots of documents will be available to yours.
Regards
Venkat Rao .G
Edited by: Venkat Rao on Aug 26, 2009 2:11 PM

CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ？hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1

What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein

Ask the Expert: NGWC (3850/5760): Architecture and Deployment

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about NGWC (3850/5760): Architecture and Deployment.
Ask questions from Monday, April 13th, 2015 to Friday, April 24th, 2015
This Ask the Expert Session will cover questions spanning NGWC products (3850/5760) on Implementation and Deployment from the Wired and Wireless perspective. This will be more specific to Customer’s and Partners questions covering 3850/5760 configuration, Implementation and deployment.
Dhiresh Yadav is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco Wireless CUWN and NGWC Product line. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS) and CCIE (DC-Written) and CCIE Wireless certification.
Naveen Venkateshaiah is working as a Customer support engineer in High-Touch Technical Services (HTTS) handling and supporting Lan-switching and Data center Products. His areas of expertise include Catalyst 3k,4k , 6500 , Nexus 7k Platform He has over 7 years of industry experience working with large Enterprise and Service Provider networks. He also holds CCNA, CCNP (RS) and CCDP-ARCH,CCIE-R&S Written, AWLANFE, LCSAWLAN Certification.
Find other https://supportforums.cisco.com/expert-corner/events.
**Ratings Encourage Participation! **
Please be sure to rate the Answers to Questions

Hi Dhiyadav,
thank you for your reply it cleared some doubts that were in my mind but i need your more support to guide me a converged access deployment which i am going to deploy within few days.
i have
2x5508 in HA as MC
30x3850 switches, and all will be used as MA(s) with multiple SPGs
2X5508 1:1 as an anchor controller
1xISE 1.3 for guest access
1xCPI for wireless mgmt and monitoring purpose
1xMSE3355 with wips and context aware licenses
200x cisco 3702i WAP
50x WSSI module for monitoring the channels
can you please put a light on the design and guide me that which are the best possible solutions to get this job done very smoothly.
i will also let you know about my proposed design scenario but for sure i need your recommendations as well :)
so,
i will use 2x5508 wlcs in HA as a MC which are AP-Count and HA licensed..
3850 switches will be MA and i ll configure SPGs per floor switches stacks
WAPs will join on these 3850 MAs base on each floor
i would have 2 ssid like employee and guest
i will configure them on each 3850 stack MA along with their SVIs for users access like (empolyee and guest ssid)
here my question is for guest ssid and its vlan... do i configure it here or on anchor controller???
i want ISE to be integrated with wireless for employee 802.1x and for guest web Auth. so, how i will integrate ISE with wireless. i mean weather i will integrate it anchor controller or with each 3850 MA???
between foreign and anchor controller i will use new mobility instead of old EOIP!!!
where shall place ISE in my network, in DMZ or with Core switch?
my target for guest users to do not have access to any corporate network sources ?
MSE:
can i use both wips and context aware on the single MSE box?
if yes, than what is the best practice for configuring them?
are each 3850 MA will be added in MSE?
WSSI module . will be used for monitoring purpose for wips and context aware profiles.
all access point will be worked in local mode for serving users access.
thank you

Design and configuration tips & suggestions

This is the current configuration of switches I have setup on our network. Its about 150 miles long(east-west) and about 20 miles wide(north-south). All of the locations are connected via a wireless bridges(trango, tranzeo, smartbridges) or via an ISP private vlan. Currently I have the 3550's connecting to each other via ospf and they are all doing inter vlan routing. The 3550 at location 20(3550-20) is I guess one of the main switches. Its located at the data center and it has the most connections to other wirelessly connected buildings. I have it configured to do pbr to 4 different DSL connections and it also has the switches from the data center connected to it. The small to medium sized locations have 2950's or 2960's.
To give you an idea of what is all going on now:
18 Wireless Bridges
1200 Workstations
30 Servers
3000 Users
21 Mbit of internet access
200 Gig's of Data being Backed up over night
1 Local server at each location
We are planning on implementing a video conferencing system soon as well as voice services in the future.
What I would like to know is what is the best configuration for these switches to prepare them for video conferencing, data connections and maybe voice?
Vlan Configurations?
Trunking?
Routing?
QOS?
Any ideas or suggestions on configurations would be great. I want to make sure I go about this the right way the first time so I'm not reconfiguring when we want to setup the video or voice services.
Thanks,
Dan.

Hi,
when designing and implementing a video and voip network there are many things to consider. So I will not try to list some of them but would recommend you to read through
1) "IP Videoconferencing Solution Reference Network Design (SRND)"
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns280/c649/ccmigration_09186a00800d67f6.pdf
2) "Enterprise QoS Solution Reference Network Design Guide Version 3.3"
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns432/c649/ccmigration_09186a008049b062.pdf
3) "Campus Network Multilayer Architecture and Design Guidelines"
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns656/c649/cdccont_0900aecd804ab67d.pdf
QoS will be needed in any case and there are separate chapters regarding your different Catalyst switches.
Generally VoIP will be transported in separate Voice VLANs interconnected through IP routing. So you should also have a look into your overall LAN design. 3) gives you a guidance to a robust modern switching design.
Hope this helps!
Regards, Martin

Installing and Configuring the Apache HTTP Server Plug-In

Hi,
I am using WL10.3 in Linux machine.
I have an environment where I have a single WL server in a domain that is deployed with the web-application
And I have another domain where I have two managed servers in a cluster that is deployed with the business.
Now, I want to configure a Apache HTTP server to make it work as a proxy along with the weblogic.
In my current scenario, the stand alone server proxies the req to the cluster and that is defined in a jndi.properties.
Now, what should I do if I want to use the Apache
I have the following questions:
1. Forget about my env, generally how can I install and configure Apache HTTP plug-in?
I see we already having libproxy_61.so file inside /bea/wlserver_10.3/server/plugin/linux/i686
Do i need to install the patch even then as told in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
2. While am adding the lines in httpd.conf ,
LoadModule weblogic_module modules/mod_wl_22.so
Should I put ibproxy_61.so instead of mod_wl_22.so in this line?
3. Just by configuring the proxy, the session replication and load balancing will be ensured?
4.And for my configuration as stated at the beginning few lines, what can be the best architecture?
Your help is really appreciated.

Hi,
Below blog would give you a clear understanding of the Integrating Apache with Weblogic. All your questions are been answered in the below blog.
http://www.prasannatech.net/2008/07/integrating-apache-tomcat-weblogic.html
You can for sure apply the patch provided in CVE-2008-3257).
Keep posted with your findings and let us know if you need any further clarification.
Regards,
Hussain

Diff b/w alert Categories and configurations

Hi Experts,
Could you please help me here, what is diff b/w Alert Categories and configurations.
Ans also what is the use of Container elements in Categories.
You ans is very helpful for me.
Thanks in Advance all.
Regards,
Madhu.

Hi Madhu,
In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable.
Go through the below doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
Regards,
Krupa

I have LabView but I do not have the Calibration and Configuration Palette,and I could not download it, how can I download it or if i cannot,can I work with the NI-DAQ Calibration_1200?

I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers

If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin

How to properly create and configure SharePoint 2013 Search service with PowerShell?

Hello Forum,
I have installed SharePoint 2013 across three tier servers:
WFE Server (Of course, SharePoint is installed here. Bsically this is just a Web server)
APP Server (Of course, SharePoint is installed here + Central Admin + Service Apps).
SQL Server
I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
script?
2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
3) How can I modify the script to specify a default Search center?
4) Apart from all the three aforementioned point - Is the script missing anything?
I would greatly appreciate your inputs - Thanks !

the only differences are where you place the components. if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
the app server. just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities.
generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers. also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
Disk for index, etc, etc), and making sure the topology works for your particular environment and needs.
if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

VCenter SRM Installation and Configuration

Hello,
We have installed and configured SRM 5.5.1 in Main site and DR site. In DR site we have two hosts and no shared storage.
Each have one vsphere replication appliance deployed and both the sites connected and we have also replicated two virtual machines successfully.
Next step we have configured protection group and recovery plan as well.
But when we test a recovery plan it gives a error "unable to access virtual machine configuration file"
Is it necessary we must have a shared storage? Can't we use local datastore on each host to power on the machines.
Regards
Karthik

Hi,
No, shared storage is not required:
Array/ vendor types
Requires same storage replication solution at both sites (eg. EMC RecoverPoint, NetApp vFiler, IBM SVC, etc)
Can support any storage solution at either end including local storage as long as it is covered by the vSphere HCL
SRM - Array Based Replication vs. vSphere Replication | VMware vSphere Blog - VMware Blogs
Michael.

Ibase and configuration error while creating a Service Contract

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

EIS Installation and Configuration

Hi Everybody,
I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
But I have no idea how to configure(Creating DSN Catalog) in EIS.
I am using Oracle 10g. Can any one please help me on thsi installation.
Already I gone through the installation document but I didn't understand how to configure.
If anyone having installation and Configuring Screen shots please send me to my mail
Mail Id: [email protected]
This is very urgent I need to give presentation on the EIS
Thanks in Advance for your help
Awaiting for your quick Response

I'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.

What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers.

PI 7.1 Architecture and configuration

Similar Messages

Maybe you are looking for