Pick selection list generation - srs
EBS R12
OS Linux
I am submitted the program "pick selection list generation - srs", by using the fnd_submit API, this is supposed to pick the Sales Order and Release the Sales Order.
Program is getting completed successfully, but is not picking the Sales Order.
Can any body tell me the required setups for using this program.
Regards,
PK
Hi PK,
Try the following..I think for some last options.
1. Subinventory specified as release criteria, and the order lines do not have a subinventory specified.
2. A specific sales order is entered, and the scheduled ship date or request date ranges are outside the dates specified in the order. For example, order 12345 was entered and booked with scheduled ship date of Nov 1, 2009; and when pick releasing this order, a scheduled ship date range of Oct 1 2009 through October 31 2009 was specified.
3. Shipping warehouse specified on the Pick Release form is not the same as the shipping warehouse specified on the order.
Thanks
-Arif.
Similar Messages
-
URG: ORACLE ERROR 6502 IN FDPSTP IN PICK SELECTION LIST GENERATION
Dear All,
I'm on 11.5.7 on Linux.
My problem is with WSHPSGL: Pick Selection List Generation that ends with error when launched from transactions form.
The program end with the following error:
Oracle Shipping: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
WSHPSGL module: Pick Selection List Generation
Current system time is 14-NOV-2002 11:26:13
**Starts**14-NOV-2002 11:26:14
ORACLE error 6502 in FDPSTP
Cause: FDPSTP failed due to ORA-06502: PL/SQL: numeric or value error:
character to number conversion error
ORA-06512: at line 1
If we launch the report trough OM Superuser - Shipping - Release Sales Orders -
Release Sales Orders, there's no error.
Has anyone have this kind of error? How can we solve it?
Any help would be greatly appreciated.
Thanks in advance
FGEBS is 11.5.10.2
OS is OEL 5.3.
It was running fine until yesterday.But its giving error today.
error log shows exception in Release_Batch_SRS procedure.
exact code is ---
++++++++++++++++++++++++
IF G_CONC_REQ = FND_API.G_TRUE THEN
l_ret_code := FND_CONCURRENT.SET_COMPLETION_STATUS('ERROR','');
errbuf := 'Exception occurred in Release_Batch_SRS';
retcode := '2';
END IF;
++++++++++++++++++++++
Thanks,
Rakesh -
Select list and date picker on one line - is this a bug?
I'm using: Application Express 3.2.0.00.27
Is the following a bug? If so, how do I get it reported so it will be fixed in a future release of APEX? If not, how do I do it so it ends up the way I want?
1. create blank page
2. create html region
3. create "select list" item (Begin On New Line - Yes, ...Field - Yes, ColSpan - 1, Row Span - 1)
4. create date picker item (Begin On New Line - No, ...Field - No, ColSpan - 1, Row Span - 1)
There will be other items displayed in more columns above what I just had you create above. I want the select list and the date picker to display next to each other on same line, so I placed date picker item on same line in same field as select list item.
HOWEVER... the date picker ends up displayed under the select list item (kind of), instead of next to it on the same line.
Here's what I get:
...................... [Select List Field] Date Picker Label
Select List Label
...................... [Date Picker Field]
Here's what I want:
Select List Label [Select List Field] Date Picker Label [Date Picker Field]
Thanks,
Steve
Edited by: sskelton on Aug 3, 2009 11:01 AM
Edited by: sskelton on Aug 3, 2009 11:02 AMHi Steve,
I'm not sure if it's the official way, but you could add a post here: Enhancement Request Thread : Post 3.1 - that's what I've been doing :D
Andy -
Populate select list when a date selected from date picker in tabular form
Hi Guys,
I have a situation where user picks a date from a date picker in tabular form.
So as soon as he picks a date say 05/31/2011 from the date picker I want to populate a select list with 2 values : Tuesday AM , Tuesday PM.
I have gone through the forums a lot and figured we can write a Dynamic Action using JQuery Selector. But I am not sure how to figure out the day from a date picker.
I appreciate if some one can give your thoughts on how to proceed. It seems to be simple but looks like a tricky one. I am not familiar with writing Java Script.
Thanks ,
RajI was thinking your date selected from CALENDAR ended in a list_item.
I don't know I thinking that
well,
:master_block.itemdate is your text_item where calendar return date selected.
and then , following Gerd's step
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:master_block.itemdate := calendar (.........);
go_block ('master-block');
execute_query;
end;
or set a global or parameter variable date selected from calendar :parameter. xxxxxx
in a PRE-QUERY
:master_block.itemdate := :parameter. xxxxxx
and
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:parameter. xxxxxx := calendar( ....);
go_block ('master-block');
execute_query;
end;
regards -
Date picker - is there a way to restrict the minuit select list to 1/4 hr
Hi,
When using date picker item with format 'DD-MON-YYYY HH24:MI',
Is there a way to restrict the minuit select list on the calendar to 1/4 hr instead of 00 to 59. Example: 00,15,30,45
Thank you,
FrancisHold down command key to select multiple songs, then "Get Info", and you will modify all fields at the same time.
-
Pick List Generation Wizard not working
Hi all,
I am trying to generate Pick List but the Pick List Generation Wizard is not picking the items to be released. The items in the sales order are all inventory/sales items. Is there a setting that needs be configured?
A screenshot of the problem is attached.
All help is appreciated.
Regards,
LucasHi,
Please refer SAP note:
1984364 - Unable to see message from SBO_SP_TransactionNotification
when releasing to pick list if bin locations are enabled
Thanks & Regards,
Nagarajan -
If Date Pick is future Date then Select List should get disabled
Hi,
I use Application Express 3.1.1.00.09 version.
Item P320_LATEST_DLR_DATE_PROJECT which is Date Picker(DD-MON-RR), if the date selected is greater than system date then P320_LATEST_DLR_RATING_PROJECT which is Select List should get disabled.
I tried in this manner:
1. Javascript in the Page Header:
<script>
function dis_selectlist(pThis, pThat)
if (pThis.value > 'SysDate')
{$x(pThat).disabled = true;}
else{$x(pThat).disabled = false;}
</script>
2. Date Picker(P320_LATEST_DLR_DATE_PROJECT) HTML Form Element Attribute:
onchange="dis_selectlist(this,'P320_LATEST_DLR_RATING_PROJECT')"
But it is not resulting in disabling of Select List Item.
Can any one tell me if this is proper or any other method to get the result?
Thanks,
Priyanka.except for making a calendar (http://active.tutsplus.com/tutorials/actionscript/understanding-date-making-a-calendar-in- as3/) there is only logic needed to create that app.
-
Multiple Select List looping thru PL/SQL function body returning SQL query
Hi,
I have a Multiple Select List. I want to loop through the values from the Select List and process them in a PL/SQL function body returning a SQL query. Currently, my code only returns the SQL SELECT results of one item in the select list. How do I change my code to make it return the results of all of the items in the select list? (I tested it and it is definitely picking up all the values in the select list).
<b>
DECLARE
selected_items HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
s VARCHAR2(20);
q varchar2(32767);
BEGIN
selected_items := HTMLDB_UTIL.STRING_TO_TABLE(:P50_SELECTED_INSTRUMENTS);
-- htp.p('COUNT: '||selected_items.count);
FOR i in 1..selected_items.count LOOP
s := TO_CHAR(selected_items(i));
-- htp.p('First: '||s);
-- htp.p('Second: '||:s);
-- htp.p('Third: '||TO_CHAR(selected_items(i)));
q:= 'SELECT '||
'SUBSTR(orig_geo_loc_sys,1,INSTR(orig_geo_loc_sys,''-'')-1) AS INSTRUMENT, '||
'SUBSTR(orig_geo_loc_sys,INSTR(orig_geo_loc_sys,''-'')+1, LENGTH'||
' (orig_geo_loc_sys)) AS ORIG_LINENUM, '||
'sum(orig_intrl) orig_intrl, '||
'sum(orig_extrl) orig_extrl, '||
'sum(recv_intrl) recv_intrl, '||
'sum(recv_extrl) recv_extrl '||
'FROM line_usage_sum_view '||
'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''' || s ||'%'' '||
--'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''2213003%'' '||
'AND switch_id = ''' || :P1_SWITCH_ID || ''' ' ||
'AND call_start_date > TO_DATE(''30-NOV-1999'') ' ||
'AND call_clear_time > TO_DATE(''30-NOV-1999'') '||
'AND '||
:SORTFIELD||' BETWEEN '||
'TO_DATE(:STARTDATE,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:STOPDATE, ''dd-MON-YYYY HH24:MI'') '||
'GROUP BY GROUPING SETS (orig_geo_loc_sys)';
-- htp.p('SQL query: '||q);
RETURN q;
END LOOP;
END;</b>
Thank you,
LauraLaura,
First, I would be careful of introducing SQL Injection possibilities. Any time I see
'Select ... ' || :P123_FOO || ' ... '
I worry about sql injection. In your case you are converting :P50_SELECTED_INSTRUMENTS into selected_items and then selected_items into s. So when I see
'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''' || s ||'%'' '||
I think, "I could use sql Injection and hack this."
So, I would do some validation on :P50_SELECTED_INSTRUMENTS or some other method to avoid this.
I'm not certain I understand your query. Do you really intend to allow the user to select the beginning of a string and then find all rows that start with that string? Or, do you just want to let them find when it matches the string. This is one way if you want to do matching:
DECLARE
selected_items HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
s VARCHAR2(32767);
q varchar2(32767);
BEGIN
-- Change the : separate string to be comma separated with quoted strings
s := '''' || replace(:P50_SELECTED_INSTRUMENTS, ',', ''',''')|| '''' ;
-- htp.p('COUNT: '||selected_items.count);
q:= 'SELECT '||
'SUBSTR(orig_geo_loc_sys,1,INSTR(orig_geo_loc_sys,''-'')-1) AS INSTRUMENT, '||
'SUBSTR(orig_geo_loc_sys,INSTR(orig_geo_loc_sys,''-'')+1, LENGTH'||
' (orig_geo_loc_sys)) AS ORIG_LINENUM, '||
'sum(orig_intrl) orig_intrl, '||
'sum(orig_extrl) orig_extrl, '||
'sum(recv_intrl) recv_intrl, '||
'sum(recv_extrl) recv_extrl '||
'FROM line_usage_sum_view '||
'WHERE TO_CHAR(orig_geo_loc_sys) in (' || s ||' ) '||
--'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''2213003%'' '||
'AND switch_id = ''' || :P1_SWITCH_ID || ''' ' ||
'AND call_start_date > TO_DATE(''30-NOV-1999'') ' ||
'AND call_clear_time > TO_DATE(''30-NOV-1999'') '||
'AND '||
:SORTFIELD||' BETWEEN '||
'TO_DATE(:STARTDATE,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:STOPDATE, ''dd-MON-YYYY HH24:MI'') '||
'GROUP BY GROUPING SETS (orig_geo_loc_sys)';
-- htp.p('SQL query: '||q);
RETURN q;
END;
If you want to do something more like you originally stated, try this:
DECLARE
selected_items HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
s VARCHAR2(20);
q varchar2(32767);
BEGIN
selected_items := HTMLDB_UTIL.STRING_TO_TABLE(:P50_SELECTED_INSTRUMENTS);
-- htp.p('COUNT: '||selected_items.count);
q:= 'SELECT '||
'SUBSTR(orig_geo_loc_sys,1,INSTR(orig_geo_loc_sys,''-'')-1) AS INSTRUMENT, '||
'SUBSTR(orig_geo_loc_sys,INSTR(orig_geo_loc_sys,''-'')+1, LENGTH'||
' (orig_geo_loc_sys)) AS ORIG_LINENUM, '||
'sum(orig_intrl) orig_intrl, '||
'sum(orig_extrl) orig_extrl, '||
'sum(recv_intrl) recv_intrl, '||
'sum(recv_extrl) recv_extrl '||
'FROM line_usage_sum_view '||
'WHERE 1=1 ';
FOR i in 1..selected_items.count LOOP
s := TO_CHAR(selected_items(i));
q := q || ' and TO_CHAR(orig_geo_loc_sys) LIKE '''|| s ||'%'' ' ;
END LOOP;
q := q || ||'%'' '||
--'WHERE TO_CHAR(orig_geo_loc_sys) LIKE ''2213003%'' '||
'AND switch_id = ''' || :P1_SWITCH_ID || ''' ' ||
'AND call_start_date > TO_DATE(''30-NOV-1999'') ' ||
'AND call_clear_time > TO_DATE(''30-NOV-1999'') '||
'AND '||
:SORTFIELD||' BETWEEN '||
'TO_DATE(:STARTDATE,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:STOPDATE, ''dd-MON-YYYY HH24:MI'') '||
'GROUP BY GROUPING SETS (orig_geo_loc_sys)';
-- htp.p('SQL query: '||q);
RETURN q;
END;
Hope this helps...
Anton -
Token from report showing up in Select List
I'm working on an app that has a drill down report. One of the columns in the report is a link (Target Type = URL) to a form that allows the user to the row that he/she clicked on in the report.
The values of parms passed to the page "511" are passed via the report tokens.
Two of the tokens for some reason aren't resolved when they get to the page (511).
The tokens #MEDIA_UID# and #LOCATION_UID# appear in the respective select lists (Media has a select list and location has a select list).
For example. When the use clicks on the link the resulting page's Media select
list will look something like this:
#MEDIA_UID#
DOC
CD
DVD
The #MEDIA_UID# Token will be included in the list of values instead of
the actual value from the row in the report.
The Target Type for the link is URL.
The URL is set to:
f?p=&APP_ID.:511:&SESSION.::&DEBUG.:511:P511_MEDIA_UID,P511_LOCATION_UID,P511_REMARKS,P511_DIST,P511_DOC_MASTER_UID,P511_NUM_TO_COPY:#MEDIA_UID#,#LOCATION_UID#,\#REMARKS#\,\#DIST#\,&P510_DOC_MASTER_UID.,#COPY_NBR#
Does the URL look OK?
Has anyone noticed this type of behavior?
Thanks.
DavidBingo. You're right. I just found that out a few minutes ago. I inherited this piece of the app from someone else. I was comparing the URLs (dev to prod). Didn't think to look at the actual column alias until after I had posted this. Someone changed
the column alias in prod but didn't make that change in the Link's target URL.
If you set the target to a page in the application and then change a column alias in the query will the link pick that change up automatically? Or do you still have to make sure and change it in the link?
Thanks.
Sorry for the wild goose chase.
David -
Select list / Pop up box - Read only ??
Hi all,
I have a select list to populate a field in an ApEx application. The select list is populated by a query on a table and as such there is no option to input any non-standard items via free text into that field - all values must be chosen from the select list.
My issue now is that the select list is getting quite large and is really not the easiest way to select data from a list.
A popup LOV is perfect for the searching through available values but it leaves the text box available for "free text input", allowing non standaerd data to be entered into that field.
Is there any solution to this?Neil,
You can use Validation to enforce correct entry. The approach I use is to use custom popup. See example below:
http://www.oracle.com/technology/products/database/application_express/howtos/how_to_create_custom_popups.html
You can set the text box's attributes to readonly="true". This will keep the textbox disabled thereby preventing free form data entry. Users will be forced to pick data from the custom popup page.
Ravi -
Hello all,
Using APEX 4.1 on Oracle 11.2 SE (Oracle Linux Server release 6).
I have a Page with a region based on a Tabular Form.
The Region Source query has various columns, including an ID. I have also added a DATE column and a "Button" column which appear on every row.
The extra DATE field is displayed as a Select List on a Named LOV.
The extra Button field is displayed as a standard report column, and has Column Link attributes which cause it to branch to another page when pressed.
What I want to happen is that when the user presses the button on one of the rows, APEX sets two application items before going to the new page:
1. the ID column for the row in which the button was pressed
2. the value currently highlighted in the Select List, for the row in which the button was pressed
Using a Column Link item value of #ID# I can successfully get hold of the ID column for the correct row.
But doing the same for the Select List column invariably returns the default value of the Select List (i.e. the initially-selected value). It doesn't pick up the change if the user has gone into the Select List and chosen a different value.
Can anybody advise the easiest way to acquire the selected value in a Select List in a Tabular Form?Thanks for the reply!
To get this working I did the following:
1. Used APEX_ITEM.SELECT_LIST_FROM_LOV(... p_item_id=>'LOVI_'||TO_CHAR(id) ...) in the base query, to generate the LOV. (Note: the ID column is the primary key, so no need to use a ROWNUM column)
2. Added a Standard Report Column with the following settings:
Link Text = <img ... >
Link Attributes = Empty
Target = URL
URL = javascript:window.location.href = 'f?p=&APP_ID.:123:&SESSION.::::ID,SELECTED_STRING:#ID#,'+$v('LOVI_'+'#ID#');
So when the link is pressed, the JavaScript is invoked and it evaluates to the value currently present in the uniquely-named <select> item.
Ian -
1 Conditional report based on 3 select lists/ 3 different select statements
I have made 1 report based on the three select lists. The report is displayed in the center of the page. The user needs to fill them in order, the select lists are:
Selectlist:
1. P1_LOVPG - Null is allowed, but is only appearing at top with a label of Productgroup
2. P1_LOVSG - Null is allowed, but is only appearing at top with a label of Subgroup
3. P1_LOVMA - Null is allowed, but is only appearing at top with a label of Manufacturer
LOVPG contains a distinct collect of the ProductGroups
QUERY LOV = select distinct pg from X
LOVSG contains a distinct collect of the SubGroups inside the selected PG.list
QUERY LOV = select distinct sg from X where pg = :P1_LOVPG
LOVMA contains a distinct collect of the Manufacturers inside the selected SG.lst
QUERY LOV = select distinct ma from X where sg = :P_LOVSG
Based on the the selected items the user would see the following:
Table X
PG SG MA ART
A-----X----M---1
A-----X----N---2
A-----Y----M---3
A-----X----M---4
B-----X----M---5
B-----Y----N---6
B-----Z----O---7
Seletion 1 PG = A -> selects PG A in select list result, User sees:
Report A
PG SG MA ART
A-----X----M---1
A-----X----N---2
A-----Y----M---3
A-----X----M---4
Query would be: select * from X where PG = :P1_LOVPG
Selection 2, user still sees the above, can only select from the SG select list NULL, X, Y. User needs to choose between X or Y value. He picks X, he sees:
Report B
PG SG MA ART
A-----X----M---1
A-----X----N---2
A-----X----M---4
Query would be: select * from X where PG = :P1_LOVPG and SG = :P_LOVSG
Selection 3, user still sees selection 2 on his screen, can only select from the MA list bewteen NULL, M or N, user needs to choose between M or N. He picks M, he sees:
Report C
PG SG MA ART
A-----X----M---1
A-----X----M---4
Query would be: select * from X where PG = :P1_LOVPG and SG = :P_LOVSG
As you can see the query changes as the user goes deeper into the structure. It is a simple if then else system where the quey changes. How do I set this up in htmldb?
(I've read something about Oracle's SQL and it's decode function, but can they be used with changing select statements?)are you sure your data meets the JOIN conditions?
You can make a quick check.. only example...
select single * from KONP into ls_konp
where knumh = P_knumh.
if sy-subrc eq 0.
select * from from A905 into table lt_a905 where
kappl in so_kappl
and kschl in so_kschl
and VKORG in so_vkorg
and vtweg in so_vtweg
and kondm in so_kondm
and wkreg in so_wkreg
and knumh = ls_konp-knumh.
if sy-subrc eq 0.
select * from A919 into table lt_a919
for all entries in lt_a905
where kappl = lt_a905-kappl
and kschl = lt_905-kschl
and knumh = lt_905-knumh.
endif.
endif. -
Hi.
i got a page with jquery mobile template, i got an select list item based on customers , when i touch the field, it display correcty all my customers, but when i try to pick some records i just get the error (i am using firefox firebug to see the error):
TypeError: s.text(...).addClass is not a function
...ollapsiblebound",!0).bind("expand collapse",function(t){var n=t.type==="collapse...
here is my query :
select
nombre_cliente || ' ' || apellidos_cliente a, codigo_cliente b
from sti_cliente
where
codigo_compania in (select distinct codigo_compania from STI_COMPANIA_SUCURSAL_USUARIO where upper(codigo_usuario) = upper(:APP_USER))
and estado_cliente = 'A'
and (MANEJA_INVENTARIO_CONSIGNACION = 'S'
and (codigo_compania, codigo_vendedor) in (select codigo_compania, codigo_vendedor from VTA_MAESTRO_VENDEDORES where codigo_usuario = upper(:APP_USER)) or cliente_contado = 'S')
order by nombre_cliente, apellidos_cliente
i have supress a dynamic action based on the field, but seems the problem is something within the query.
i am running on :
Application Express 4.2.4.00.08
Application Express Listener version : 2.0.5.287.04.27
Application Express Listener server info: Grizzly/1.9.49
thanks for any tip.PLEASE DO NOT post to long since expired threads. The poster is probably NOT following this thread and your response doesn't really help them with their issue...
Elephants wear tu-tus so they can hide in pine trees. Did you ever see an elephant in a pine tree? No? Well then, you know it works.
Thank you,
Tony Miller
LuvMuffin Software
Ruckersville, VA -
How To? Select List item return 2 values (high and a low)
Can anyone suggest how to make a select list drop box return 2 values for my query.
eg:
Pick from
Last Week
Last Month
Last Year
return high/lo values of
5-feb-06 12-feb-06
01-jan-06 31-jan-06
01-jan-05 31-dec-06
Such that my query can refer to it as
select *
from tabx
where dte > :parm_lo
and dte < :parm_hi
You get the idea ..I haven't tested this at all, so it may not work, but the first thing that springs to mind is not returning the two dates, base it on the current date, i.e. have your select list return something like -
Last Week - Return 'W'
Last Month - Return 'M'
Last Year - Return 'Y'
then use a query something like -
SELECT *
FROM tabx
WHERE dte >
CASE v ('ITEM')
WHEN 'W'
THEN TRUNC (SYSDATE, 'd')
WHEN 'M'
THEN TRUNC (SYSDATE, 'Mon')
WHEN 'Y'
THEN TRUNC (SYSDATE, 'yyyy')
ELSE dte - 1
ENDLike I said, completely untested and may not work...you may also have to play around with the boundary values (NLS settings too perhaps). -
I would like to be able to submit an Infopath form with a multiple selection list box in Sharepoint as multiple entries on a Sharepoint list.
For example, a user has to complete the following fields:
First Name:
Last Name:
Favorite Color (can select more than one):
[] Blue
[] Red
[] Yellow
[] Green
If the user picks blue AND red and submits the form, the Sharepoint list would feature TWO entries, both with their first and last names, but with different colors in the "Favorite Color" column.
Please let me know if there is a way to do this. Any guidance would be helpful!Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
How do I move a subfolder of pic files to its parent file in a different location?
How do I move 37 picture files in a sub folder to a parent folder in a different location?
-
Can this be solved by a nested query?
Hello, Can anybody help me? Thanks a lot. We have a test system that test production units, and output data to the TestData table in the database. The TestData table schema is like the follows. For each unit, it may pass the test system for multiple
-
How do I combine an .m2v file and an .ac3 file into a .mov file ??
Hello, I had a question regarding Demuxing M2V and AC3 files so that they can be combined into a .mov file. A few years ago I converted a .mov file into an .m2v and an .AC3 using Final Cut Pro. I lost the FCP Project and .mov files and only have the
-
HT4623 how toimport songs from computer to iphone
how to import songs from computer to my iphone
-
System overload (-10011) error????
Okay, so I know VERY little about Logic. Last night I had my guitar plugged into the mic-in and was trying to record some stuff through guitar rig r whatever the plug-in is called. I kept getting some latency issues, so I played with the buffer sizes