Pictrivia 6 - Can you identify what's wrong with this setup?

What's Pictrivia?
It's a trivia presented as a picture - more picture, less words. If you love solving puzzles, racking your brains on brain teasers,you would love this one.
Who can participate?
It's open to all. You can participate on Facebook, Twitter or here. If you are subscribed to our Facebook or Twitter channels, you'll see the message posted on early Saturday mornings pacific time.
How often will you post a trivia?
Once a week on Fridays.
How do I answer?
You can answer by replying to this discussion. If you saw the post on our Facebook page or Twitter, simply comment on the post or reply to our tweet.
What do I get?
Intellectual stimulation, thrill and pleasure of solving a puzzle!
What's the skill level required?
Beginners
When will I know the right answer?
On the following Wednesday.

Access layer switch will became bridge root。（default priority，lowest MAC address 1111.1111.1111）。And this L2 network will working at low efficiency。

Similar Messages

Can you see what's wrong with my sql clause?

Select afkogltri sum( afpowemng ) as yqty
 from ( afpo inner join afko on afpoaufnr = afkoaufnr )
 into ( d_gltri , d_wemng )
 where afpo~matnr = wa_pir-matnr
 and year( afko~gltri ) = year( sy-datum )
 group by afko~gltri.
The above is my sql clause, when I do a syntax check, it said:"Comma without preceding colon (after SELECT ?)"
Can you tell me what's wrong with this sql clause?
Thank you very much!

Hi,
Select Bgltri sum( Awemng ) as yqty (????)
into ( d_gltri , d_wemng )
from afpo as A inner join afko as B
on Aaufnr = Baufnr
where A~matnr = wa_pir-matnr
and year( B~gltri ) = year( sy-datum )
group by B~gltri.
ENDSELECT.
eg:... INTO (f1, ..., fn)
Places the result set in the target area (f1, ..., fn). The fields of the result set are transported to the target fields fi from left to right. INTO (f1, ..., fn) is allowed only if a list with n elements is also specified in the SELECT clause.
If the result of a selection is a table, the data is retrieved in a processing loop introduced by SELECT and concluded by ENDSELECT. The processing passes through the loop once for each line read. If the result is a single record, the closing ENDSELECT is omitted.
Example
Output a list of all airlines (with short description and name):
TABLES SCARR.
DATA: CARRID LIKE SCARR-CARRID,
 CARRNAME LIKE SCARR-CARRNAME,
SELECT CARRID CARRNAME
 INTO (CARRID, CARRNAME)
 FROM SCARR.
WRITE: / CARRID, CARRNAME.
ENDSELECT
Thanks & Regards,
Judith.

Can anybody see what is wrong with this SQL statement?

Hey guys, just a quick question. Can anybody tell me what is wrong with this line of SQL? I keep getting a syntax error message. I've been trying for ages and I can't see any problem at all!"
{code}prepStat = connection.prepareStatement("INSERT INTO WeatherHistory (Date, Location, Overview, Temperature, WindDirection, WindSpeed, Pressure) VALUES ('"+date+"','"+location+"','"+temp+"','"+windDir+"','"+windSpd+"','"+pressure+"')");{code}
All the field names and variables definitely exist so I can't see what the problem is!

DHD wrote:
Thanks for the replies.
I've matched the correct number of column names and variables, but still no luck.
And how exactly am I misusing Prepared Statements here?As noted above, not according to the code you posted. I didn't just pluck something out of my @ss and throw it out there. There was a reason behind what I said. And, if you mean you changed it, and you still got an exception, then post that exception (completely), and your new code, which is, hopefully, using PreparedStatement, (properly).

Can someone see what is wrong with this? Im stumped

 public class Card {
 int suit;
 int value;
 static int isStraight = 0;
 static int isFlush = 0;
 static int handCounter = 0;
 static int cardCounter = 0;
 boolean inUse = false;
 public int getSuit() {
 return suit;
 public void setSuit(int suit) {
 this.suit = suit;
 public int getValue() {
 return value;
 public void setValue(int value) {
 this.value = value;
 public boolean isInUse() {
 return inUse;
 public void setInUse(boolean inUse) {
 this.inUse = inUse;
 public static int checkPairs(int[] handValues){
 for (int x = 0; x<5; x++ ){
 for (int y = 0; y<5; y++ ){
 if(handValues[x]==handValues[y]){
 cardCounter ++;
 handCounter = handCounter + (cardCounter - 1);
 cardCounter = 0;
 System.out.println(handCounter);
 return handCounter;
 public static int checkStraight(int[] handValues){
 if(handValues[0] == (handValues[1]-1)){
 if (handValues[1] == (handValues[2]-1)){
 if (handValues[2] == (handValues[3]-1)){
 if (handValues[3] == (handValues[4]-1)){
 ///System.out.println("straight");
 isStraight = 1;
 if (handValues[4] == 12){
 isStraight = 2;
 return isStraight;
 public static int checkFlush(Card[]inputHand){
 if (inputHand[0].suit == inputHand[1].suit){
 if (inputHand[1].suit == inputHand[2].suit){
 if (inputHand[2].suit == inputHand[3].suit){
 if (inputHand[3].suit == inputHand[4].suit){
 isFlush = 1;
 return isFlush;
//handCheckerApp ,
import tcdIO.*;
public class handCheckerApp {
 ///these string arrays just hold the names of the values
 static String[] suitsArray = {"hearts" , "spades" , "diamonds" , "clubs" };
 static String[] valuesArray = {"two" , "three" , "four" , "five" , "six" , "seven" , "eight" , "nine" , "ten" , "jack" , "queen" , "king" ,"ace" };
 public static void main (String arguments []) {
 Terminal terminal = new Terminal();
 Card[] inputHand = new Card[5];
 Card[] deck = new Card[52];
 Card currentCard = new Card();
 for(int number = 0 ; number <= 12 ; number++){
 deck[number]= new Card();
 deck[number].suit = 0;
 deck[number].value = number;
 for(int number = 13 ; number <= 25 ; number++){
 deck[number]= new Card();
 deck[number].suit = 1;
 deck[number].value = (number - 13);
 for(int number = 26 ; number <= 38 ; number++){
 deck[number]= new Card();
 deck[number].suit = 2;
 deck[number].value = (number - 26);
 for(int number = 39 ; number <= 51 ; number++){
 deck[number]= new Card();
 deck[number].suit = 3;
 deck[number].value = (number - 39);
 terminal.println("Poker Hand Checker");
 terminal.println("~~~~~~~~~~~~~~~~~~");
 terminal.println("Suits key:..Hearts = 1");
 terminal.println("...................Spades = 2");
 terminal.println("...................Diamonds = 3");
 terminal.println("...................Clubs = 4");
 terminal.println(".............................");
 terminal.println("Values key:.Twos = 2");
 terminal.println("......................Threes = 3");
 terminal.println("......................Fours = 4");
 terminal.println("......................Fives = 5");
 terminal.println("......................Sixes = 6");
 terminal.println("......................Sevens = 7");
 terminal.println("......................Eights = 8");
 terminal.println("......................Nines = 9");
 terminal.println("......................Tens = 10");
 terminal.println("......................Jacks = 11");
 terminal.println("......................Queens = 12");
 terminal.println("......................Kings = 13");
 terminal.println("......................Aces = 14");
 ///this block of code marks cards in the deck as in use and adds them to the hand
 for(int i = 0; i < 5; i++){///for1
 currentCard.value = (terminal.readInt("please enter card " + (i+1) + " value: " )-2);
 currentCard.suit = (terminal.readInt("please enter card " + (i+1) + " suit: " )-1);
 for (int x = 0; x< 52; x++){///for2
 if (deck[x].value == currentCard.value){///if1
 if (deck[x].suit == currentCard.suit){///if2
 if (deck[x].inUse == true){///elseif1
 terminal.println("you chose that card already");
 i--;
 }///if3
 else if(deck[x].inUse == false){///if3
 deck[x].inUse = true;
 inputHand[i] = deck[x];
 terminal.println("this card is the " + valuesArray[(inputHand.value)] + " of " + suitsArray[(inputHand[i].suit )]);
 }///elseif1
 }///if2
 }///if1
 }///for2
 }///for1
 int handValues[] = {inputHand[0].value, inputHand[1].value, inputHand[2].value, inputHand[3].value, inputHand[4].value};
 java.util.Arrays.sort(handValues);
 ///this method checks for pairs, two pairs, three of a kind, full house & four of a kind
 Card.checkPairs(handValues);
 if (Card.handCounter == 2) {
 terminal.println("You have a pair");
 if (Card.handCounter == 4) {
 terminal.println("You have two pair");
 if (Card.handCounter == 6) {
 terminal.println("You three of a kind");
 if (Card.handCounter == 8) {
 terminal.println("You have a full house");
 if (Card.handCounter == 12) {
 terminal.println("You have four of a kind");
 } else {
 terminal.println("");
 Card.checkStraight(handValues);
 Card.checkFlush(inputHand);
 if (Card.isStraight == 1 && Card.isFlush == 0){
 terminal.println("You have a straight");
 if (Card.isStraight == 1 && Card.isFlush == 1){
 terminal.println("You have a straight flush");
 if (Card.isStraight == 2 && Card.isFlush == 0){
 terminal.println("You have a royal straight");
 if (Card.isStraight == 2 && Card.isFlush == 1){
 terminal.println("You have a royal straight flush");
 if (Card.isStraight == 0 && Card.isFlush == 1){
 terminal.println("You have a flush");
 if (Card.isStraight == 0 && Card.isFlush == 0){
 terminal.println("");
Okay it's not recognising deck.inUse....i can't see why.
Can someone possibly point out some suggestions. Thanks, much appreciated.

> if (deck[x].inUse == true){///elseif1
>
it's giving me an error on this If else statement...
sorry ....
How about going the extra mile and actually posting the error message you receive rather than expecting everyone to guess? The more pertinent information you can provide, the easier it is to answer your question. And you want your question answered easily and quickly, right?
~

Can i know what is wrong with this sql?

i have an error of invalid character.
SELECT SUM(counter),TO_DATE(logdatetime)
FROM NYP_LIBPORTAL.PORTAL_HOME_NON_LOGIN_LOG
WHERE logdatetime = logdatetime
AND (TO_DATE(logdatetime, 'DD-MON-YYYY') BETWEEN
TO_DATE('01-JAN-2007', 'DD-MON-YYYY') AND TO_DATE('31-JAN-2007', 'DD-MON-YYYY'))
GROUP BY TO_DATE (logdatetime);
May i know is there any way that i need to make the changes?

your problem is likely to be the TO_DATE(logdatetime) - if logdatetime is a DATE datatype, then you should never, ever use TO_DATE on it.
But I suspect this has been sorted in a later post of yours?

What is wrong with this setup? (samba)

[global]
workgroup = Media
server string = %h server (Samba, Ubuntu)
log file = /var/log/samba/log.%m
max log size = 1000
security = share
wins support = yes
preferred master = no
guest account = thomas
[Disk (1)]
comment = Samba server
path = /home/hybel
browseable = yes
writeable = yes
guest ok = yes
available = yes
public = yes
This config is supposed to give me access from other computers without asking for password? From windows computers this works like it should, but from linux it dosnet. Always asks for passwd and always failt to login.
And i set workgroup to media, but appears on the network as myhost. Why?

Samba can be a bit of a hassle to configure properly.
No idea what it SHOULD look like, but I can post mine. (It is at least working here)
[global]
workgroup = speido
server string = toffyrn-net
security = user
hosts allow = 192.168.0. 127.
load printers = yes
log file = /var/log/samba/%m.log
max log size = 50
dns proxy = no
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
guest ok = no
writable = no
printable = yes
[tmp]
comment = Temporary file space
path = /tmp/tmpshared
read only = no
public = yes
[torrents]
comment = torrents
path = /srv/deluge
public = yes
writable = no
printable = no
tmp is writable by everyone, torrents is only readable.
Also you would need to open some ports in your firewall.
PS: Your second post is called bumping and discouraged here on the forums...
Lykke til!

I can't figure out what's wrong with this code

First i want this program to allow me to enter a number with the EasyReader class and depending on the number entered it will show that specific line of this peom:
One two buckle your shoe
Three four shut the door
Five six pick up sticks
Seven eight lay them straight
Nine ten this is the end.
The error message i got was an illegal start of expression. I can't figure out why it is giving me this error because i have if (n = 1) || (n = 2) statements. My code is:
public class PoemSeventeen
public static void main(String[] args)
EasyReader console = new EasyReader();
System.out.println("Enter a number for the poem (0 to quit): ");
int n = console.readInt();
if (n = 1) || (n = 2)
System.out.println("One, two, buckle your shoe");
else if (n = 3) || (n = 4)
System.out.println("Three, four, shut the door");
else if (n = 5) || (n = 6)
System.out.println("Five, six, pick up sticks");
else if (n = 7) || (n = 8)
System.out.println("Seven, eight, lay them straight");
else if (n = 9) || (n = 10)
System.out.println("Nine, ten, this is the end");
else if (n = 0)
System.out.println("You may exit now");
else
System.out.println("Put in a number between 0 and 10");
I messed around with a few other thing because i had some weird errors before but now i have narrowed it down to just this 1 error.
The EasyReader class code:
// package com.skylit.io;
import java.io.*;
* @author Gary Litvin
* @version 1.2, 5/30/02
* Written as part of
* Java Methods: An Introduction to Object-Oriented Programming
* (Skylight Publishing 2001, ISBN 0-9654853-7-4)
* and
* Java Methods AB: Data Structures
* (Skylight Publishing 2003, ISBN 0-9654853-1-5)
* EasyReader provides simple methods for reading the console and
* for opening and reading text files. All exceptions are handled
* inside the class and are hidden from the user.
* <xmp>
* Example:
* =======
* EasyReader console = new EasyReader();
* System.out.print("Enter input file name: ");
* String fileName = console.readLine();
* EasyReader inFile = new EasyReader(fileName);
* if (inFile.bad())
* System.err.println("Can't open " + fileName);
* System.exit(1);
* String firstLine = inFile.readLine();
* if (!inFile.eof()) // or: if (firstLine != null)
* System.out.println("The first line is : " + firstLine);
* System.out.print("Enter the maximum number of integers to read: ");
* int maxCount = console.readInt();
* int k, count = 0;
* while (count < maxCount && !inFile.eof())
* k = inFile.readInt();
* if (!inFile.eof())
* // process or store this number
* count++;
* inFile.close(); // optional
* System.out.println(count + " numbers read");
* </xmp>
public class EasyReader
protected String myFileName;
protected BufferedReader myInFile;
protected int myErrorFlags = 0;
protected static final int OPENERROR = 0x0001;
protected static final int CLOSEERROR = 0x0002;
protected static final int READERROR = 0x0004;
protected static final int EOF = 0x0100;
* Constructor. Prepares console (System.in) for reading
public EasyReader()
myFileName = null;
myErrorFlags = 0;
myInFile = new BufferedReader(
new InputStreamReader(System.in), 128);
* Constructor. opens a file for reading
* @param fileName the name or pathname of the file
public EasyReader(String fileName)
myFileName = fileName;
myErrorFlags = 0;
try
myInFile = new BufferedReader(new FileReader(fileName), 1024);
catch (FileNotFoundException e)
myErrorFlags |= OPENERROR;
myFileName = null;
* Closes the file
public void close()
if (myFileName == null)
return;
try
myInFile.close();
catch (IOException e)
System.err.println("Error closing " + myFileName + "\n");
myErrorFlags |= CLOSEERROR;
* Checks the status of the file
* @return true if en error occurred opening or reading the file,
* false otherwise
public boolean bad()
return myErrorFlags != 0;
* Checks the EOF status of the file
* @return true if EOF was encountered in the previous read
* operation, false otherwise
public boolean eof()
return (myErrorFlags & EOF) != 0;
private boolean ready() throws IOException
return myFileName == null || myInFile.ready();
* Reads the next character from a file (any character including
* a space or a newline character).
* @return character read or <code>null</code> character
* (Unicode 0) if trying to read beyond the EOF
public char readChar()
char ch = '\u0000';
try
if (ready())
ch = (char)myInFile.read();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (ch == '\u0000')
myErrorFlags |= EOF;
return ch;
* Reads from the current position in the file up to and including
* the next newline character. The newline character is thrown away
* @return the read string (excluding the newline character) or
* null if trying to read beyond the EOF
public String readLine()
String s = null;
try
s = myInFile.readLine();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (s == null)
myErrorFlags |= EOF;
return s;
* Skips whitespace and reads the next word (a string of consecutive
* non-whitespace characters (up to but excluding the next space,
* newline, etc.)
* @return the read string or null if trying to read beyond the EOF
public String readWord()
StringBuffer buffer = new StringBuffer(128);
char ch = ' ';
int count = 0;
String s = null;
try
while (ready() && Character.isWhitespace(ch))
ch = (char)myInFile.read();
while (ready() && !Character.isWhitespace(ch))
count++;
buffer.append(ch);
myInFile.mark(1);
ch = (char)myInFile.read();
if (count > 0)
myInFile.reset();
s = buffer.toString();
else
myErrorFlags |= EOF;
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
return s;
* Reads the next integer (without validating its format)
* @return the integer read or 0 if trying to read beyond the EOF
public int readInt()
String s = readWord();
if (s != null)
return Integer.parseInt(s);
else
return 0;
* Reads the next double (without validating its format)
* @return the number read or 0 if trying to read beyond the EOF
public double readDouble()
String s = readWord();
if (s != null)
return Double.parseDouble(s);
// in Java 1, use: return Double.valueOf(s).doubleValue();
else
return 0.0;
Can anybody please tell me what's wrong with this code? Thanks

String[] message = {
 "One, two, buckle your shoe",
 "One, two, buckle your shoe",
 "Three, four, shut the door",
 "Three, four, shut the door",
 "Five, six, pick up sticks",
 "Five, six, pick up sticks",
 "Seven, eight, lay them straight",
 "Seven, eight, lay them straight",
 "Nine, ten, this is the end",
 "Nine, ten, this is the end"
if(n>0)
 System.out.println(message[n]);
else
 System.exit(0);

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

HT1212 my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone

my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?

I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed. So if this is the case, is iOS7 the problem?

When on the phone to someone the phone crackles and hangs up so the other person can't hear what is wrong with it? :(

When on the phone to someone the phone crackles and hangs up so the other person can't hear what is wrong with it? :(

That iPhone needs to be tested by the techs at an Apple store genius bar to see what is faulty in the hardware.

Can someone tell me what's wrong with this LOV query please?

This query works fine..
select FILTER_NAME display_value, FILTER_ID return_value
from OTMGUI_FILTER where username = 'ADAM'
But this one..
select FILTER_NAME display_value, FILTER_ID return_value
from OTMGUI_FILTER where username = apex_application.g_user
Gives the following error.
1 error has occurred
* LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
Thanks very much,
-Adam vonNieda

Ya know, I still don't know what's wrong with this.
declare
l_val varchar2(100) := nvl(apex_application.g_user,'ADAM');
begin
return 'select filter_name display_value, filter_id return_value
from otmgui_filter where username = '''|| l_val || '''';
end;
Gets the same error as above. All I'm trying to do is create a dropdown LOV which selects based on the apex_application.g_user.
What am I missing here?
Thanks,
-Adam

What's wrong with this SQL?

what's wrong with this SQL?
Posted: Jan 16, 2007 9:35 AM Reply
Hi, everyone:
when I insert into table, i use the fellowing SQL:
INSERT INTO xhealthcall_script_data
(XHC_CALL_ENDED, XHC_SWITCH_PORT, XHC_SCRIPT_ID, XHC_FAX_SPECIFIED)
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N'
FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION
SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
I always got an error like;
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT,
ERROR at line 3:
ORA-00936: missing expression
but I can't find anything wrong, who can tell me why?
thank you so much in advance
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:38 AM in response to: jerrygreat Reply
For starters, an insert select does not have a values clause.
HTH -- Mark D Powell --
PP
Posts: 41
From: q
Registered: 8/10/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:48 AM in response to: mpowel01 Reply
Even I see "missing VALUES" as the only error
Eric H
Posts: 2,822
Registered: 10/15/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:54 AM in response to: jerrygreat Reply
...and why are you doing a UNION on the exact same two queries?
(SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:55 AM in response to: mpowel01 Reply
Hi,
thank you for your answer, but the problem is, if I deleted "values" as you pointed out, and then execute it again, I got error like "ERROR at line 3:
ORA-03113: end-of-file on communication channel", and I was then disconnected with server, I have to relogin SQLplus, and do everything from beganing.
so what 's wrong caused disconnection, I can't find any triggers related. it is so wired?
I wonder if anyone can help me about this.
thank you very much
jerry
yingkuan
Posts: 1,801
From: San Jose, CA
Registered: 10/8/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:59 AM in response to: jerrygreat Reply
Dup Post
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:00 AM in response to: Eric H Reply
Hi,
acturlly what I do is debugging a previous developer's scipt for data loading, this script was called by Cron work, but it never can be successfully executed.
I think he use union for eliminating duplications of rows, I just guess.
thank you
jerry
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:03 AM in response to: yingkuan Reply
Scratch the VALUES keyword then make sure that the select list matches the column list in number and type.
1 insert into marktest
2 (fld1, fld2, fld3, fld4, fld5)
3* select * from marktest
UT1 > /
16 rows created.
HTH -- Mark D Powell --
Jagan
Posts: 41
From: Hyderabad
Registered: 7/21/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:07 AM in response to: jerrygreat Reply
try this - just paste the code and give me the error- i mean past the entire error as it is if error occurs
INSERT INTO xhealthcall_script_data
(xhc_call_ended, xhc_switch_port, xhc_script_id,
xhc_fax_specified)
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE'
UNION
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE';
Regards
Jagan
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 11:31 AM in response to: Jagan Reply
Hi, Jagan:
thank you very much for your answer.
but when I execute it, I still can get error like:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
so wired, do you have any ideas?
thank you very much

And this one,
Aother question about SQL?
I thought I already told him to deal with
ORA-03113: end-of-file on communication channel
problem first.
There's nothing wrong (syntax wise) with the query. (of course when no "value" in the insert)

Pictrivia 6 - Can you identify what's wrong with this setup?

Similar Messages

Maybe you are looking for