Ping but no client response

I am using ARD 3.3 to manage the Macs in my building. I am having troubles with 11 out of 21 of the MacBook 4,1 model computers that are not showing up on the Scanner / All Computers list with ARD. Those not on the list show up as black icons with IP Addresses signifying that they can be pinged but have no client response from those computers. They are running Client Software v. 3.3.1 and access the network wirelessly, same as the Admin Comp.
I have opened the Sharing system pref and turned ARD on/off, modified the access privileges and restarted all machines to no avail. What else can I try to get these computers to be managed via ARD?

They are running Client Software v. 3.3.1 and access the network wirelessly
Are the appropriate ports open and forwarded in the wireless router to those workstations? You'll need to do some special setup to be able to manage multiple systems behind an NAT (see "Setting Up the Network" in the Remote Desktop Help).

Similar Messages

Message failed in PI: Status code 200 But Error During Response Parsing:

Hi
I have integration scenario for sending PO/PO change/Proact from R/3 to SNC, everything was working till yesterday morning and suddenly all messages are failing in SAP PI with below error. We have not done any changes. The strange thing is this is failing in dev as well as in QA.
HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)
I can see some messages in sxmb_moni (we have not configured this) from sender component "Integration_Server_SID" and it's failed with below message
Proxy calls are not permitted on sender or
receiver side on the IS (client)
Thanks,
Nishant

HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received
XML element {http://schemas.xmlsoap.org/soap/envelope/}Envelope missing in SOAP message header (SAP XI Extension)
Same problem answered in this discussion....check if it helps:
Re: BW to File scenario
Regards,
Abhishek.

Error in Ping Operation : Received HTTP response 407

Hi,
We are configuring Adobe Document Services, but while testing destination service http://<server>:<port>/sap/bc/fp/form/layout/fp_test_00.xdp under Server --> Services --> Destination of Visual Admin we are getting
Error in Ping Operation : Received HTTP response 407.
HTTP Error Code 407 is related to proxy configuration, but does any one have any infomation where do we maintain this proxy configuration.
Regards,
Jigar Oza

Hi,
Checked SMICM it is working fine.
I am getting this error on portal so no logs will be generated on ECC.
On portal while testing i am getting following log :
destination: http://172.16.10.52:8000/sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
Problem accessing data from Destination: dest:FP_ICF_DATA_DEV//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
com.adobe.ads.destination.De
stinationException: File Not Found while reading Dest URL: http://172.16.10.52:8000/sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to t
he Web Proxy filter is denied. )
u201C
Regards,
Jigar Oza

I can able to see odbc entries in virtual regisrty of the sequence. But on client machine I am unable to find them

Hi,
I have created a sequence I can able to see odbc entries in virtual regisrty of the sequence. But on client machine I was
unable to find the ODBC entries. Actually the same application is worked in Windows 2003. Now I am creating the same for WIndows 7.
Application: LOB
Sequence on Windwos 7
Sequencer App-V 4.6
Thanks in Advance.

Have you tested the ODBCs aren't there (and/or the app doesn't work), or are you only looking at regedit?
http://blog.gridmetric.com/2011/09/26/possible-caveats-in-mixing-32-bit-and-64-bit-app-v-packages-and-environments/
We have seen sometimes where the registry keys aren't visible under wow6432 node, but are really there. I would suggest opening up the ODBC (odbcad32.exe) in the bubble, and see how things look.

Good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

TS1297 My numbers / symbols 1-9 / !-( do not work on my wireless key pad. I have tried the resolution information but, still no response with those keys only. I can only type these keys with the keyboard viewer. Any suggestions?

My numbers & symbols 1-9 / !-( do not work on my wireless key pad. I have tried the resolution information but, still no response with those keys only. I can type these keys with the keyboard viewer, thankfully. Any suggestions?

Unable to type while Mouse Keys is enabled in OS X

HTTP Status Code 200 Received But Error During Response Parsing

Hi Experts,
We are testing a simple Proxy(ECC) to File scenario in QA. This interface was working fine in Dev but we are getting the following error here in QA:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">OK_BUT_NO_XI_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We searched other threads but could not get any solution. Please provide suggestions.
Thank You.
Regards,
Anandan

the problem was due to high volume message (247 MB ) ...Java stack was not able to process this huge message ,that is the reason ,it started automatically and as a result , "HTTP Status Code 200 Received But Error During Response Parsing" due to unavailability of AFW during Call adapter step in the pipeline processing...
We have done the following activities in order to solve this problem....
increase the value of icm/HTTP/max_request_size_KB to 512MB
                                    icm/wp_roll_timeout   to maximum
                                    HTTP TIMEOUT to 1800 sec
                                   icm/wp_roll_timeout   to maximum
                                     mpi/total_size_MB to maximum
                                   mpi/buffer_size to maximum
and then increased the maxthreadcount ,maxcontentlength using config tool...
and also increased the java heap size to maximum....
After doing everything ,the file has been successfully processed....
the problem has been resolved...

We have PI-7.0 but our client requires work on XI-3.0.

we have PI-7.0 but our client requires work on XI-3.0. is it possible to transfer objects in PI-7 TO XI-3.0 and is it ok to work on PI-7.0 insted of XI-3.0 which is wanted by our client.

Hi Chiru,
I dont think there are should be any problems.... All you need to take care is you have same Service Pack installed on bothe the servers...
A comparision of the service packs in 2004 and 2004s;
in 2004XI 3.0 - in 2004s PI 7.0
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
Regards,
Jai Shankar.

Ping but no reply?!?

I just recently installed vista and now i cant get on the net. I am able to ping but i dont get any replys. I can access my router just fine which means the problem is at the router. Also if i put my pc in the Dmz guess what? The net works!!!!!!!!! So with that being said i have no idea why this is happening. I didnt make any changes to my router except that i installed vista. Anyone have any idea what to do to change this. Btw i tried disable the firewall on the pc lowering security in ie etc..

If you have any policy under access restrictions, disable those. If you have MAC address filtering enabled disable that. If you have static IP address on router remove it.

But My client want restriction of BOM change from system.

Dear Friend,
My client every now and then BOM is changed. We are changing BOM using Engineering change. But My client want restriction of BOM change from system in plant level/ Material Level. For Example For One month no one should change the BOM.
Please suggest me how to proceed.
Regards,
Sanjay

Hi Sanjay,
Another potential solution, to avoid changing authorisation:
Create a new transaction, based on the standard one. Add some coding to restrict access based on a table (you will need some ABAP coding here).
You can then develop your own logic.
For sure you need to give access to the new transaction and remove access from the standard one (check first feasibilty with your authorisation team)
Thanks and Regards
Julien

TS3274 My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response. Any ideas as to what may be wrong and what I can do?

My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response. Any ideas as to what may be wrong and what I can do?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Encryption is required to connect to this server but the client library does not support encryption

Hi ,guys
I came cross a trouble when I configured connection encryption.
I met the following problem when I have configured connection encryption done.
Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [client: ip]
environment info:
SQL:SQL2008 \SQL2005\SQL2008R2
SERVER:WIN2003 \WIN2008R2
We use C# to develop asp.net webform app, so the provider I use should be SQL client.
client .NET Framework version:NET Framework 3.5
Pls tell me why I met this weird problem.
Thanks in advance.
Love SQL

Sure,here is the connetion string of java app.
jdbc
db.url=jdbc:jtds:sqlserver://60.x.x.x./TaskSiteInfo
db.username=xxx
db.pwd=xxx
Your initial post stated you were using SqlClient in an ASP.NET 3.5 app. I think this is an issue with the jTDS client based on the error message. Are you using the latest jTDS driver? If so, try posting this issue to
http://sourceforge.net/p/jtds/discussion/
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

HT4157 How do I reset the password. I requested forgot password e-mail but got no response.

How do I reset the password. I requested forgot password e-mail but got no response.

Did you reset the password according to these instructions that can be found by clicking on the appropriate links?
Frequently asked questions about Apple ID
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See How to change your Apple ID password if you'd like more information.

I submitted an email but the auto response indicates I have to wait up to 48 hours for a response. Am I the only one who thinks this is ridiculous???

Why isn't there a phone number for iTunes Support? My only iTunes Support contact option is email. I submitted an email but the auto response indicates I have to wait up to 48 hours for a response! Am I the only one who thinks this is ridiculous???

oh whoops i forgot to tell you, i didn't actually find apple's number, although i think they have one.........what i did was i went onto the express lane and when through a series of steps and typed in my phone number and it was SUPER fast. It scared me that as soon as i pressed enter, not more than 30 seconds later, my phone started ringing. But that's the one you have to pay for.....

Client response times

Is there any way that these can be obtained in the access.log?
The Oracle webserver extended log includes a useful parameter (called
time-taken) which gives an approximate client response time. Does
WebLogic have a similar option?

Hi Steve,
WebLogic 5.1 supports Extended Log File format for its access.log. The
format includes the field you are asking about (time-taken) and much
more. Check out the docs for WLS 5.1 and the spec for ELF format at W3C
web site.
Thanks,
-ruslan
Steve Hicks wrote:
Is there any way that these can be obtained in the access.log?
The Oracle webserver extended log includes a useful parameter (called
time-taken) which gives an approximate client response time. Does
WebLogic have a similar option?

Ping but no client response

Similar Messages

Maybe you are looking for