Ping time out, server connection is lost in visual administrator after java

Dear all,
Recently I have done system copy for XI system. I have imported the java import after importing the abap stack into the target system as java add in abap.The import phase finished successfully and java engine is also working well.
I have confirmed this by moving to the browser page " http://hostname:50000/ and XI system http://hostname:50000/rep ". Everything is working fine and in MMC console as well.
But while trying to log in to visual administrator i am getting the error message as " ping time out,connection to server is lost "
std_serverout.log
unrecoverable stack overflow has occurred.
An unexpected error has been detected by HotSpot Virtual Machine:
EXCEPTION_STACK_OVERFLOW (0xc00000fd) at pc=0x00000000080e3c66, pid=2940, tid=928
Java VM: Java HotSpot(TM) 64-Bit Server VM (1.4.2_16-b05 mixed mode)
Problematic frame:
V [jvm.dll+0xe3c66]
An error report file with more information is saved as hs_err_pid2940.log
stdout/stderr redirect
node name   : server0
pid         : 3060
system name : XIT
system nr. : 03
started at : Tue Feb 17 18:42:50 2009
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is starting...
Loading: LogManager ... 453 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 94 ms.
Loading: ThreadManager ... 31 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 219 ms.
Loading: LockingManager ... 93 ms.
Loading: ConfigurationManager ... 1502 ms.
Loading: LicensingManager ... 31 ms.
Loading: ServiceManager ...
6.226: [GC 6.226: [ParNew: 87040K->8544K(130560K), 0.0628724 secs] 87040K->8544K(1005056K), 0.0629982 secs]
Loading services.:
Service memory started. (16 ms).
Service cross started. (15 ms).
Service file started. (78 ms).
Service timeout started. (32 ms).
Service runtimeinfo started. (15 ms).
Service userstore started. (63 ms).
Service trex.service started. (94 ms).
Service jmx_notification started. (63 ms).
Service p4 started. (235 ms).
Service classpath_resolver started. (15 ms).
10.537: [GC 10.537: [ParNew: 95584K->16246K(130560K), 0.0776272 secs] 95584K->16246K(1005056K), 0.0777727 secs]
Service deploy started. (3926 ms).
Service log_configurator started. (4363 ms).
Service locking started. (0 ms).
Service http started. (172 ms).
Service naming started. (203 ms).
Service failover started. (78 ms).
Service appclient started. (110 ms).
Service javamail started. (140 ms).
Service jmsconnector started. (140 ms).
Service ts started. (125 ms).
Service licensing started. (16 ms).
Service connector started. (188 ms).
Service configuration started. (31 ms).
service MobileSetupGeneration ================= ERROR =================
Service MobileArchiveContainer started. (78 ms).
Service webservices started. (470 ms).
Service dbpool started. (1172 ms).
13.195: [GC 13.196: [ParNew: 103286K->20423K(130560K), 0.0478316 secs] 103286K->20423K(1005056K), 0.0489244 secs]
Service com.sap.security.core.ume.service started. (2596 ms).
Service security started. (2471 ms).
Service classload started. (78 ms).
Service applocking started. (141 ms).
Service shell started. (188 ms).
Service tceCATTPingservice started. (32 ms).
Service telnet started. (63 ms).
18.218: [GC 18.218: [ParNew: 107463K->25937K(130560K), 0.0545612 secs] 107463K->25937K(1005056K), 0.0546428 secs]
Service webdynpro started. (203 ms).
Service ejb started. (532 ms).
Service dsr started. (172 ms).
Service keystore started. (485 ms).
Service ssl started. (16 ms).
Service servlet_jsp started. (704 ms).
Service tcsecsecurestorage~service started. (63 ms).
Service jmx started. (391 ms).
Service tclmctcculculservice_sda started. (0 ms).
Service rfcengine started. (656 ms).
Service tcsecwssec~service started. (469 ms).
Service apptracing started. (360 ms).
19.355: [GC 19.355: [ParNew: 112977K->42681K(130560K), 0.0844669 secs] 112977K->47563K(1005056K), 0.0845476 secs]
Service tcsecdestinations~service started. (907 ms).
Service basicadmin started. (860 ms).
Service adminadapter started. (297 ms).
Service pmi started. (312 ms).
Service tclmctcculservice_sda started. (1251 ms).
Service tcsecvsi~service started. (438 ms).
Service monitor started. (407 ms).
Service sld started. (1721 ms).
20.296: [GC 20.296: [ParNew: 129721K->39952K(130560K), 0.1028212 secs] 134603K->50894K(1005056K), 0.1028881 secs]
Service tc.monitoring.logviewer started. (1704 ms).
21.584: [GC 21.584: [ParNew: 126992K->40823K(130560K), 0.0664458 secs] 137934K->58110K(1005056K), 0.0665026 secs]
Service jms_provider started. (3518 ms).
Service com.sap.aii.af.cpa.svc started. (2033 ms).
Service com.sap.aii.af.security.service started. (16 ms).
Service com.sap.aii.af.svc started. (157 ms).
22.873: [GC 22.873: [ParNew: 127863K->43238K(130560K), 0.0574693 secs] 145150K->65266K(1005056K), 0.0575210 secs]
Service com.sap.aii.af.ms.svc started. (407 ms).
Service com.sap.aii.adapter.marketplace.svc started. (47 ms).
Service com.sap.aii.adapter.bc.svc started. (47 ms).
Service com.sap.aii.adapter.xi.svc started. (47 ms).
Service com.sap.aii.adapter.jms.svc started. (79 ms).
Service com.sap.aii.adapter.mail.svc started. (63 ms).
Service com.sap.aii.adapter.jdbc.svc started. (156 ms).
Service com.sap.aii.adapter.rfc.svc started. (219 ms).
Service com.sap.aii.af.ispeak.svc started. (313 ms).
Service com.sap.aii.adapter.file.svc started. (2315 ms).
ServiceManager started for 22082 ms.
Framework started for 24772 ms.
SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is running!
PatchLevel 100627.313 December 14, 2005 20:06 GMT
>26.086: [GC 26.086: [ParNew: 130278K->23111K(130560K), 0.0693509 secs] 152306K->68371K(1005056K), 0.0694372 secs]
32.059: [GC 32.059: [ParNew: 110151K->34716K(130560K), 0.0419854 secs] 155411K->79975K(1005056K), 0.0420301 secs]
32.608: [GC 32.608: [ParNew: 121756K->43497K(130560K), 0.0827214 secs] 167015K->105659K(1005056K), 0.0827638 secs]
38.688: [GC 38.688: [ParNew: 130537K->39986K(130560K), 0.0525517 secs] 192699K->106409K(1005056K), 0.0526114 secs]
41.615: [GC 41.615: [ParNew: 127026K->32598K(130560K), 0.0467433 secs] 193449K->103188K(1005056K), 0.0467930 secs]
44.298: [GC 44.298: [ParNew: 119638K->34820K(130560K), 0.0430069 secs] 190228K->105410K(1005056K), 0.0432422 secs]
46.443: [GC 46.443: [ParNew: 121860K->39729K(130560K), 0.0498349 secs] 192450K->110319K(1005056K), 0.0499023 secs]
48.656: [GC 48.656: [ParNew: 126769K->36669K(130560K), 0.0625983 secs] 197359K->112667K(1005056K), 0.0626567 secs]
52.243: [GC 52.243: [ParNew: 123709K->39589K(130560K), 0.0477260 secs] 199707K->115587K(1005056K), 0.0477793 secs]
115.241: [GC 115.241: [ParNew: 126629K->37429K(130560K), 0.0553704 secs] 202627K->118544K(1005056K), 0.0554346 secs]
118.096: [GC 118.096: [ParNew: 124469K->40865K(130560K), 0.0504829 secs] 205584K->121980K(1005056K), 0.0505322 secs]
120.589: [GC 120.589: [ParNew: 127905K->37247K(130560K), 0.0578313 secs] 209020K->123954K(1005056K), 0.0578734 secs]
122.573: [GC 122.573: [ParNew: 124287K->39626K(130560K), 0.0534208 secs] 210994K->126333K(1005056K), 0.0534640 secs]
124.070: [GC 124.077: [ParNew: 126666K->35377K(130560K), 0.0626490 secs] 213373K->128235K(1005056K), 0.0627628 secs]
126.103: [GC 126.103: [ParNew: 122417K->37886K(130560K), 0.0485833 secs] 215275K->130744K(1005056K), 0.0486433 secs]
128.251: [GC 128.251: [ParNew: 124926K->41258K(130560K), 0.0482213 secs] 217784K->134115K(1005056K), 0.0482675 secs]
130.792: [GC 130.792: [ParNew:
Due to this i am not able to log in visual adminsitrator.Kindly advice me for the same.
Thanks in advance
Vijay

Hello vamshi,
As you have suggeseted, I followed the notes and changed the following paramters.The system is 64bit and hence the values are adjusted according to the server.
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-Djava.awt.headless=true
-XX:SoftRefLRUPolicyMSPerMB=1
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Xss2m
-Xms2048M
-Xmx2048M
-XX:MaxNewSize=320M
-XX:NewSize=320M
-XX:MaxPermSize=512M
-XX:PermSize=512M
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:+UseParNewGC
-XX:+UseTLAB
-XX:+HeapDumpOnCtrlBreak
The heap size for java is 2048
But still i am getting the ping time out. Connection to server is lost.
Kindly let me know,
Regards
Vijay

Similar Messages

IChat keeps telling me my server connection was lost

iChat keeps telling me my server connection was lost but there is absolutely nothing wrong with it. I have used iChat for years with no problem and I checked everything with my connection and it is obviously fine if I can write this message.

Hi Kimberly,
If this has been when you set up your Google ID in iChat then make sure you have spelt your ID EXACTLY as it appears when you log in to the Google Wb Mail page.
In Mail you can set it up to Retrieve your Google Mail.
It seems to be less fussy here about whether you use the @gmail.com ending or the @googlemail.com one but in iChat it is Important.
In iChat Menu > Preferences > Accounts in iChat 4 and 5 you can click the Add Button at the Bottom of the list and the Add pane allows you to Chose GoogleTalk.
This will then add the server name for you (Now Seen in Server Settings tab)
This should read talk.google.com
IF you added it as a Jabber ID (It is a jabber server after all) then the server will be whatever the ending of your ID is (gmail.com or googlemail.com) as it pulls through the ending of the Name/ID
In iChat 3 there is no Google Talk opeion when adding an account and you have to Manually change the Server Name in that Server Settings tab.
In all cases it should use SSL and list port 5223
Google will allow Logins on port 443 so you could try changing that.
I have not come across an issue with the Password length with a Google ID
If this is a recent thing then check that you can Login with a Browser to the GoogleMail Web page (i.e Find out if the name and password are correct.)
If it works there go to System Preferences > Security > Firewall
If this is ON then go to the Advanced Button
Make sure Allow Signed Apps is Enabled (Snow Leopard) and that iChat is in the List
In Leopard Allow All or Allow Specific Apps (And iChat in the list) should be ticked then in the Advanced Button Stealth should not be On.
If you allowed iChat through your Router using Port Forwarding then check that the IP In System Preferences > Network > Advanced Button > TCP/IP tab is the same one in the Port Forwarding settings on the router.
10:02 PM Wednesday; June 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error time out to connect FTP server

Hi Experts,
I am getting the error in receiver communication channel (FTP) as :
An error occurred while connecting to the FTP server ''. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: The control connection to the FTP server "" timed out while reading the server reply.'. For details, contact your FTP server vendor.
Getting this error for a particular interface. Changed the time out parameter but not working.
the same IP address is used for same receiver but different interface and it is in green status.
tried to restart the adapter but same time out error.
Same configuation is done for two receiver channels .. but getting above error for a particular interface.Please help.
Thanks,
Swapnashree

Hi Swapna,
If you are facing problem with only one interface then you make some dummy changes in configuration(ID) to that perticular channel and activate.
After doing this you just restart your communication channel and check if you have any luck.....
Also check if you have permissions ......for the user and folder which you are accing in your channel...
Naveen.

Getting Frequent time out while Connecting to SQL server 2008 Instance installed on VmWare

Hi,
I have a production SQL server Database with default instance. when I connect this instance from 10 attempts it get connected only 5-6 times. I connect this through SSMS. Some of jobs also getting failed due to login time out expired. please help in this.
Product is SQL server 2008 Enterprise Edition
Thank You
Yogesh Arora

Yogesh Arora
Have you checked Event Viewer and ERROR.LOG?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Getting Connection Time out while connecting and with tnsping

Hello Experts,
I am new to Oracle world, so please go easy on me.
I installed Oracle 11 XE on Centos 6.4 VM. followed the official installation procedure and database was installed without any errors.
I am able to login to database through sqlplus and able to run sql queries.
Problem comes when i am trying to connect from sql developer or external application. i get Connection Time out error.
Below are the tnsnames.ora and listener.ora file content
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
lsnrctl stat shows service stats as UNKNOWN and tnsping also fails
bash-4.1$ lsnrctl stat
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:00:48
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date                10-JUN-2013 19:39:03
Uptime                    0 days 6 hr. 21 min. 45 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/sagbase/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=basevm)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
bash-4.1$ tnsping xe
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:01:16
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12535: TNS:operation timed out
I am stuck and don't know where else to check.
Could you guys please help me out here?
Thanks.

That tnsping error indicates several possible problems, most related to the setup for the client. Or network setup on the database server host.
Connecting to a database using sqlnet requires three things, the database host, the listener port, and the ORACLE_SID or instance SERVICE_NAME.
The tnsping utility is only concerned with the first two items, host and port. It will not perform an actual connection, and will not verify the tnsalias ORACLE_SID or SERVICE_NAME values.
An "OK" result from tnsping verifies that the specified host has a listener running at the specified port and it is servicing connections.
Since you're not getting an "OK" from tnsping, could be something is blocking the connection (i.e. firewall), the host= specification is not correct, or the port= spec is not correct. Note that host= must either be a valid and correct hostname, or a an IPv4 address. If IPv6 is in the mix, only the correct hostname will work. A hostname that resolves correctly.
Look at your network interface setup on the host, find its IP address, make sure the IP will `ping`, and try a new sqlnet.ora entry with the IPv4 address.
ifconfig -a
<interface>: flags=...
inet n.n.n.n
# in sqlnet.ora:
xe2 = ... host=n.n.n.n ...
tnsping xe2
... ok? ...

Show ip route shows 'route', but ping times out. Please help.

RouterB,EIGRP 100
s0:152.1.1.1/16
Lo:1.1.1.1/24
no auto-summary]- connected to V35---
[s0/0 RouterA,Lo:2.2.2.2/24,EIGRP AS 100, OSPF Area0, s0/1]/
--- connected to---
[s0/0:192.168.15.2/24
RouterC, OSPF 200,
Area 1]
As you can see in the show ip route from RouterC below, I am able to see a route for 1.1.1.0/24. It is an EIGRP AS redistributed into OSPF.
However, I ping '1.1.1.1' from RouterC, but it times out. Why can't I get to 1.1.1.1 from RouterC ?!
RouterC# Show ip route
1.0.0.0/24 is subnetted, 1 subnets
O E2 1.1.1.0 [110/1000] via 192.168.15.1, 00:04:06, Serial0/0
O E2 152.1.0.0/16 [110/1000] via 192.168.15.1, 00:06:12, Serial0/0
2.0.0.0/32 is subnetted, 1 subnets
O IA 2.2.2.2 [110/65] via 192.168.15.1, 00:06:19, Serial0/0
3.0.0.0/24 is subnetted, 1 subnets
C 3.3.3.0 is directly connected, Loopback0
C 192.168.15.0/24 is directly connected, Serial0/0
RouterC#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
Success rate is 0 percent (0/5)

I agree with Sundar that since the route appears in the routing table that you probably do have a viable path to get to 1.1.1.0 and that the problem is most likely lack of a return path.
One way to verify this would be to run debug ip icmp on the router that you are attempting to ping and then do the ping again. If the debug output shows that the ping packets are being received then you have verified that the problem is with the return path.
HTH
Rick

Network connection time out when connecting to Itunes store

When I try to connect to Itunes store i get this message:
"Itunes could not connect to iTuens sore network connection has times out Make sure your network connection is active and your network setting are correct"
Can some one walk me through or link me to a site or discussion so i can get this fixed

I had the same problem several days with the AppStore. Software-downloads did not proceed, i tryed everything, shut down firewalls, change the host-file, disable proxy-server - no success.
I have Kaspersky-Suite as firewall and anti-virus-software.
Accidentially I find a solution:
- select in iTunes at downloads "Proceed" of a download-entry . iTunes then connect with the server, so it is enough time to:
- right-click on the windows-tray-symbol of Kaspersky and select "stop service" (something like that, i work with the german version).
Now, surprise, the download proceed and starts working again. In case the download is freezing again:
- Reactivea Kaspersky-service with right-click as described above, then deactive the serve again as i described.
Seems this "Workaround" opens a door to an network-connection Kaspersky usually block by itself.
Shutdown the firewall and finishing the Firewall-Software is a good idea, but you never know, which process is running in the background despite you shutdown everything possible...
Hope the "solution" is working for you!

HT4628 my powerbook g4 os x 10.5.8 leopard is showing-Connection time out while connecting to the wifi.however it showing all available wifi connections around but not connecting it..however ethernet is working

Problem while connecting with Wi-Fi,
When i am connecting my powerbook g4 leopard to any Wi-fi connection it showing -Connection time out, however Ethernet is working .I have updated all softwares but still same problem.

It's possible that either the internal AirPort Extreme card or the antenna is faulty or has failed.
One last thing to try before going with another Wi-Fi solutions is to the following:
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)
3. Run the Disk Utility to repair Disk Permissions.
Restart or log out then back in.
4. Turn off the Mac OS X Firewall
System Preferences > Sharing > Firewall
Click the "Stop" button.
5. Create a New User Account
System Preferences > Accounts
Click "+" to add a new account
Log off, then log back on with the new user account.
Try connecting with the AirPort.
If none of these help resolve the issue, you may want to consider getting a USB wireless adapter to replace both the internal card and antenna. One such vendor of these adapters is Other World Computing (OWC).

Everytime i try to get online it times out before connecting.retry.

whenever i try to go online, it takes too long and times out with error message. then to retry and sometimes works.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Time Capsule "Server Connection Interrupted"

For the last 2 months I get this Pop Up every Couple of Hours on my iMac. I have a Time Capsule & my iTunes Library is on that Network Hard Drive.
"Server Connections Interrupted" and shows the Hard Drive in my Time Capsule (iTunes).
I am running latest Version of Lion.
I am connected from iMac Ethernet to Time Capsule.
I have the Time Capsule Drive Set to Login when my Mac Starts Up.
But here's the funny part. My iTunes Music will be Playing perfectly when this Pops Up. No skips, Stutters. Nothing. So it does not interfere with anything working.
I would like to Post the Error but I forgot how!

I have just installed a new 4th generation Time Capsule, and have the same [what I thought initially was just a nuisance] 'Server Connections Interrupted' popup window appearing very frequently.
Here is the Popup window:
Worse; when I began the process of backing up 105GB of data from my NAS RAID 1 set up to the new Time Capsule (TC), the copying process is failing part way through [typically deep down in the Folder Structure] which as you can image is a real pain, a hopeless situation really…
Here is the Copy Faiure message:
The TC setup is simple, WiFi turned Off, DHCP, Bridge Mode. Connected directly by Ethernet to iMac and the NAS, and the WAN Ethernet port to an AirPort Extreme.
I also note a strange entry in the TC Airport Utility 'Logs and Statistics'…
Every five minutes, there is a Severity:5 message, an AFP Login, instantly closed?
Feb 25 12:13:56          Severity:5          AFP login OK from Robert [email protected].
Feb 25 12:13:56          Severity:5          AFP session from Robert [email protected] closing.
Feb 25 12:18:57          Severity:5          AFP login OK from Robert [email protected].
Feb 25 12:18:57          Severity:5          AFP session from Robert [email protected] closing.
10.0.1.2 is my iMac
What on earth is this log about, is it related to the failure of the copying of the backup files from NAS to TC...
I am in a desperate situation right now, since I am unable to continue with the backup and restructure of iPhoto and iTunes libraries, which are all resident on the NAS RAID 1 setup.
Am replacing all of the Ethernet cables involved, incase this is simply a 'bad connection'.
Would appreciate some feedback from anyone who may have cracked this issue...
Take note Apple, this is awful!… All my other stuff, prior to this incident, an Airport Extreme, an older Time Capsule as WiFi extension and storage, Airport Express, Macmini, works like a charm…
Robert

HT1595 Why does my wifi connection is lost in apple TV after a few minutes?

I have tried giving apple tv a static ip but the connection is lost after a few minutes and does not come back. I have tried re-booting the router as well as ATV!

I have this same problem, and apple said that it has to do with the router closing the ports so you have to call whoever makes your router and have them help you port forward. I did this and it helped for a couple months, then back to the same ol' same ol'.

Server connect with electric devices like fan throuh java

I want to make a program in java which run on my site server.This program control my home electric devices.The client access server and give instruction to the server to shut light.How it possible in java.Detail descriptioon.

http://www.google.com/search?q=java+home+automation
You need hardware that are network enabled device controllers, and some software.

Unable to connect to NWA and Visual administrator

HI all - I have Java stack installed i at its own database which coexists with another ABAP stack on same virtual machine.
I am not able to connect to Visual administrator to install the saplicens. connection error is as follow
Unable to connect to hostname:50104.
I have checked the value of p4 using configtool and it is 50104.
I have 2 extra emergency users that I have created to make sure if do not face user errors. Since DNS is not resolving FQHN, I have updates /etc/hosts file in my pc to make sure there are no network issues.
The only error I see is in ms_dev which is indicating saplicense has been expired.
Any idea, how to solve this problem?
DB= Oracle 10.2.0.2
CRM JAVA 7.0 EHP1
CRM ABAP 7.0 EHP1
Instances CJX(Java instance) and CSX (ABAP)
Tnsnames Listener and tnscsx
Your help is appreciated.
Regards
K

Hi Sunny, Thx for taking a look. I think I am in right direction after checking the logs. I did not have a chance to configure UME afterthe install. I am not sure if I should use APAP stack as the source. In the same time, My license is expired and can not connect to NWA or Visual admin.
Here are the logs
System trace:
#1.#C0000A6717E800020000000001762FC700047ECE97733050#1265325676114#/System/Serve
r/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.Login
Task#######Thread[Thread-9,6,main]##0#0#Error#1#/System/Server/VisualAdministrat
ionTool#Plain###Error while trying to login to localhost: Cannot create new Remo
teLoginContext.#
Trace files:
#1.#C0000A6717E800010000000101762FC700047ECE910D3800#1265325568767#com.sap.engin
e.services.adminadapter.gui.tasks.LoginTask##com.sap.engine.services.adminadapte
r.gui.tasks.LoginTask#######Thread[Thread-5,6,main]##0#0#Error#1#/System/Server/
VisualAdministrationTool#Java###Error while trying to login to localhost: Cannot
create new RemoteLoginContext.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseLoginException: Cannot cr
eate new RemoteLoginContext.
        at com.sap.engine.services.security.remote.login.RemoteLoginContext.<ini
t>(RemoteLoginContext.java:71)
        at com.sap.engine.services.adminadapter.gui.tasks.LoginTask.connectActio
n(LoginTask.java:98)
        at com.sap.engine.services.adminadapter.gui.tasks.LoginTask.run(LoginTas
k.java:81)
        at java.lang.Thread.run(Thread.java:534)
Caused by: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection
on host: 10.103.23.232 and port: 50104
        at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(
P4ObjectBrokerClientImpl.java:706)
        at com.sap.engine.services.rmi_p4.ConnectionManager.getConnection(Connec
tionManager.java:257)
        at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:154)
        at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:113)
        at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:109)
        at com.sap.engine.services.security.remote.login.RemoteLoginContext.<ini
t>(RemoteLoginContext.java:60)
        ... 3 more
Visualadmin console:
log generation timestamp : 2010_02_04_at_07_55_27
Feb 4, 2010 7:56:45 AM [1265291805268]:Error   : Thread[Thread-9,5,main]
                     com.sap.engine.services.rmi_p4:    com.sap.engine.services.
rmi_p4.Parser newRequest MSG:The possible problem is that there is no correctly
working server node available. Check your working servers
Feb 4, 2010 8:02:41 AM [1265292161634]:Error   : Thread[Thread-23,6,main]
                     com.sap.engine.services.rmi_p4:    com.sap.engine.services.
rmi_p4.Parser newRequest MSG:The possible problem is that there is no correctly
working server node available. Check your working servers

IIS Manager 6.0 Wait Operation Time Out on connecting to remote server

I'm looking to configure SMTP on Server 2012 Core, I've installed the feature and remote management/administration tools and web management console and web management compatability. When I attempt to connect via IIS 6.0 Manager I immediately receive "The
wait operation timed out"
I've removed and re-installed the SMTP-Server feature without success
any suggestions would be appreciated.

I encountred this issue the IIS 6.0 requires the SMTP if you want to configure the remote management of the Server Core then try to follow this youtube podcast
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
of this serie that shows how to install and configure a web server core from A to Z
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

AEBS Connection Time Out - No Connection

OS 10.5.4 or 10.5.5 tried both:
Within the past couple of days my MacBook can no longer make a reliable connection to my AEBS. The MacBook sees about 8 other wireless networks in my neighborhood but at time, my AEBS is not even on the list of available networks. When it does appear, I can't connect it using the correct password. MacBook scans persistently, the number of networks change. I'd suspect my internal card but it's the AEBS that seems to be the most illusive for it find and hang onto. When I do connect, the transport rate is very sluggish and at times stalls out.
Clean install twice yesterday.

I appreciate the suggestions.
In some ways, the problem began with the installation of OS 10.5.0 some time ago. It cleared up in 10.5.1.
The base station has not changed in location for 4 years and no new wireless devices have been added in the house.
It's one of those intermittent problems that has worsened. Often my AEBS is not even on the list of available networks. I CAN see the networks of what is probably my nearest neighbors. That list is not always the same either.
When my AEBS shows up, I often cannot connect with it. When I do, transport is slow - if not non existent. Just now, I was able to both see it and connect. To see if I get transport, I'll have to send this message as I am in the "bridged" mode with a CAT5 cable running to the base station which is psychically connected to the hardwired router.
It's an issue between my Intel Macbook and the AEBS circa 2004. Older iBook hanging around - no problems in finding or connecting.
I've been traveling. Sometimes but not always logging into free WiFi at airports. This happened the same way last month after going across the US. Similar issue after returning from another cross country trip. I've deleted all but a couple of familiar networks. All the ones from airports are at least out of the list. If some public Wi-Fi drops a cookie on me and it takes some time to expire - my only guess.
On return, things seem fine for a day or two - then the problem occurs.

Ping time out, server connection is lost in visual administrator after java

Similar Messages

Maybe you are looking for