Pixel bender parameter not showing up in flash

I am writing a pixel bender filter to be used in Flash. When I run the kernel in Pixel Bender I can see and change all my parameters (float and float2), but once exported to a .pbj and embedded in Flash I get a "TypeError: Error #1010: A term is undefined and has no properties.". I have run a loop tracing the shader data and it does not show that the parameters are there I change the version number for each export and I am surely embedding the latest version.
Can someone please tell me why this would be happening, I am totally at a loss.
Thanks,
Chris

UPDATE:
You can forget converting the fonts, here is what really helps:
Move all of your fonts from your user library to your desktop (or whereever, just make sure to remember where), basically uninstalling all your fonts.
Then put the fonts that you need & miss in FLASH into this folder: Macintosh HD/System/Fonts
Enter your user password to confirm the movement of the files into the system folder.
Restart FLASH.
Now the formerly missing fonts should show up in FLASH.
When you're done with your Flash Project, you can delete the added fonts from the system folder and move your old fonts back to your user library in order to get your sytem back the way it was.
WARNING: Be careful while in the system folder, you don’t wanna make any mistakes there. ^^
SICK that adobe is not fixing this issue which is really hell hell hell. Hope this helps you guys in the meantime.
cheers.

Similar Messages

  • Pixel Bender does not show in filters after installation but shows in extension mgr as plugin

    I installed pixel bender (64bit) into my CS5 extended group through the extension manager as administrator as per directions for win 7. All went well and I restarted both PS5 and the computer. I do not have any pixel bender option under filters or anywhere else I can find. Did I do something wrong? I will uninstall it and try again, but right now, it's not looking good.

    Ok... here's the deal. I installed the CS5 Master Collection on my computer. It installed a 32 and a 64 bit version of PS5 on my Win 7 64bit system. I thought that may have been because I downloaded a trial version (possibly 32 bit?) from the web before I got my full version in the mail. I uninstalled it and did a clean install with the disc a second time thinking that the earlier trial version had created some kind of protocol. When I reinstalled the PS5 64 bit from the disc it AGAIN installed both versions but the only one that will open is the 32 bit. So, I downloaded the 32 bit version of Pixel Bender and reinstalled (as administrator) the plug in (or extension) from the Extension Manager. It is there now although I have not tried it. At least it shows. I still don't know why I am working in the 32 bit version??? Anyone know?

  • I had to re-install CS5 as CC does not have pixel bender - now Pixel Bender is not showing up even with with CS5 - can you help?

    Can anyone advise how I get this plug in - Now using iMac OSX 10.9.5

    Pixel bender is a plugin you need to download and install for photoshop cs5.
    lnks here:
    https://forums.adobe.com/thread/1644090?sr=stream

  • Pixel Bender did not install with CS4 on Win7 64. Downloaded toolkit, message "installer failed to initialize"

    Pixel Bender did not install with CS4 on Win7 64. Downloaded toolkit, message "installer failed to initialize"
    What should I try next?
    Thank you, and happy Holidays!

    What I had installed was CS4 Desin Premium on Win7 64 bit. Pixel bender seems to be installed, but nothing happens when I launch and it doesn't show in Photoshop 32 or 64...
    Thanks

  • Fonts not showing up in Flash CS5

    Maybe I'm missing something simple but I just can't get some fonts to appear in Flash cs5  on mac osx. they work fine in Photoshop / Illustrator, but don't appear in Flash.
    Any ideas?

    You may find something useful in one of these links:
    http://forums.adobe.com/message/3238692
    http://jeremy-knight.com/2011/05/certain-fonts-not-showing-up-in-flash/

  • Pixel Bender is NOT installing Please help!

    I have The Creative Suite Version 5.5, which includes Photoshop CS 5.1. I'm trying to install the Pixel Bender Plugin for Photoshop CS5.1. I run at x64 bit and I'm attempting to install the correct plugin version. However, when I double click on the MXP file it opens up Adobe Extensions Manager 5.5 and goes through the process to install the plugin, when finished, the plugin isn't listed on the Extensions Manager. I don't get a error or any kind. The plugin simply doesn't show up. I have restarted my computer, downloaded the latest version of Adobe Air and Flash Player. I have repaired permissions on my computer. I'm really at a loss here. Can anyone help? Oh and I'm Running a Mac with Lion. Thank you in advance.

    I spent all day yesterday trying to install PB into my PS5, and it will not work. Then I got smart and started to search the forums, and it has been DISCONTINUED!  This means that you cannot get it to work.
    Though I did see someone say that you can get PB into PS3. Which I still have, so we are awaiting to see if anyone on those forums has any info on that.
    Oil Paint, which is the one filter in PB that we all want, has been put into PS6 as an included filter. But we are awaiting some of our classmates who have already updated to PS6, to tell us if they like it. I wont upgrade to the new version yet.
    I realize that this forum has not been added to for a year, but hope my answer helps those of us who are really interested in Oil Paint.

  • Components not showing up in Flash CS5

    What's the correct way to install components in Flash CS3?
    first I tried to install the NewGrounds Ad component for AS 3.0 which delivers as an .xmp file. I doubleclicked it and in the Extension Manager it's listed as active under Flash CS5. I restarted flash, but the component does not show up in the components list.
    I then tried to install the minimal components from http://minimalcomps.com/ which are delivered as an SWC. I went to the ActionScript 3.0 settings in flash, went to the "library path" tab and clicked browse to swc to select the SWC file. but these components don't show up in the components list either.
    So what am I doing wrong?
    Thanks

    1. Go to HELP > MANAGE EXTENSIONS
    2. Choose Flash
    3. Choose FILE > "Install Extension"
    4. Install xxx.mxp from below locations one of them (you may need to show system folders on Windows to see).
    5. I checked these folders on my machine but they were empty,,, but I already have components installed.
    C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration
    if u can't find it try to go to the below path:
    C:\Users\userName\AppData\Local\Adobe\Flash CS4\ar\Configuration
    and copy all files existing in this folder to:
    C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration

  • Parameter Field issue : Parameter not showing in enter values.

    i got three paramater setup...
    All three parameters are used in record selection formula.
    When i click on refresh, only two parameters are showing up in enter values screen...why thired parameter is missing?
    two parameters are date and third one is string. String parameter is not showing in enter values. How to fix this?.

    Hi,
    I haven't run into this problem so I'm not sure if it's a bug or not.  When you added the parameter to the report, did you type the parameter into the formula yourself or did your double-click on it from the Field Explorer?
    It should be fine adding it from the Field Explorer.  Strange but not really sure why it's not working for you though.
    Good luck,
    Brian

  • Parameter not showing any results

    Hi all,
    To start off, I am a SAP BI consultant starting to learn crystal report, so I am quite a novice.
    Currently I have a problem with parameters, I am using the xtreme.mdb to learn crystal report.
    My crystal report is 2008.
    My report is quite simple, it has customer id and customer name. I have created a parameter using dynamic list of values instead of static. The value of the datasource is customer id and the "allow discrete" value is set to true.
    So far, no problems. When I inserted the parameter in the report and preview it, the report comes up with a popup with a drilldown arrow. When I click on the arrow it is not showing any values.
    Also, clicking on "OK" or "Cancel" in the popup doesn't do anything.
    Can anyone please help?
    thanks in advance,
    James

    Hi james,
    Please go through the thread
    Re: CR XI - Command Parameter Not Working
    regards
    Baby

  • Pixel Bender will not open in PS CS5 (not enough RAM)

    I get the following message when I try to open Pixel Bender in Photoshop CS5:
    Could not complete the Pixel Bender Gallery command because there is not enough memory (RAM).
    I have 4GB RAM on a Mac Mini 2gHz Core Duo, and I have never had another plug in fail to load. Requirements are supposed to be the same as CS5.
    Any suggestions?

    Thanks for your response.
    Photoshop is running in 32-bit mode, as most of my plug ins are not yet 64 bit.
    This error dialog appears before the gallery opens.
    All my images are under 4096 px wide. I tried using a much smaller image. Same message.
    I tried increasing the available memory in preferences. Same message.
    I tried lowering the available memory in preferences. Same message.
    My Mac Mini has an NVidia 9500M, which is listed as one of the cards that support GPU processing for Pixel Bender. Memory is shared with the CPU, but that should not be relevant - many others would have had my complaint if that mattered.

  • Pixel Bender will not install

    I downloaded Pixel Bender and have tried both auto and manual install into my
    Photoshop 5> Extension Manager, but it keeps telling me that it cannot install
    into my 32 bit Photoshop 5 PC program. Also installed Adobe Air in case I needed
    it.
    Message I keep getting is...
    "Extension can not be installed, it requires 32 bit or 64bit Photoshop ver5 or later"
    What could I be doing wrong for it to not install?
    I've got plenty of memory and disk space along with an Intel i5
    processor. I've installed all updates to my Photoshop 5 that I purchased
      when it first came out.
    ....Ellen

    Thanks for your response.
    Photoshop is running in 32-bit mode, as most of my plug ins are not yet 64 bit.
    This error dialog appears before the gallery opens.
    All my images are under 4096 px wide. I tried using a much smaller image. Same message.
    I tried increasing the available memory in preferences. Same message.
    I tried lowering the available memory in preferences. Same message.
    My Mac Mini has an NVidia 9500M, which is listed as one of the cards that support GPU processing for Pixel Bender. Memory is shared with the CPU, but that should not be relevant - many others would have had my complaint if that mattered.

  • Crystal Report Parameter not showing in IPAD

    Hi All, 
    I create simple Purchase register report  by using Crystal report with date parameter
    My problem is that report not working on Ipad and its showing blank space .  
    The report working fine on ipad when i run report without parameter.
    Kindly tell me solution.

    Hi Rajesh,
    I am new to this Mobility..What is integration service upgrade..
    Currently we are using
    SMP Legacy connection typ1.
    BO version is 4.1 SP02.
    App is 6.0.6
    Please advise on this issue...and the steps which you have used..

  • Font showing in photoshop font list but not showing in the flash font list

    Hi,
    I have some issues with fonts. I am using a Mac OS X and i have installed the fonts into font book.
    The installed fonts are showing up in my Photoshop CS3 font list but are missing from my Flash CS3 and CS4 font lists.
    I am using .otf fonts.
    Any help will be really appreciated .
    Thanks,

    Jude,
    I don't know what the problem may be, sorry.
    Since the fonts are not from Adobe, you'll have to either contact the foundry from which you've licensed them or post this issue on the Flash forum at http://forums.adobe.com/community/flash/flash_general

  • Parameter not showing in Active parameter List.

    Dear Team,
    I have fresh Install SAP 4.7 with sql 200 on Windows 2000 server. After proper installation .I have activate the Profile.
    When I Edit the parameter  via RZ10 and then add new paramer
    i.e Login/no_automatic_user_sapsta    1
    Proper save .Then proper Restart the instance .but Its now showing in my Active parameter List.
    Whats the reasion.   Or what the step i am messing.
    Thanks & Regards
    Jagdish Kumar

    In which profile did you make the change (the program that lists active parameters only lists those for the instance that you are logged into).
    Here are some links on maintaining profiles:
    [Checking Active Parameters|http://help.sap.com/saphelp_nw70/helpdata/EN/c4/3a62e3505211d189550000e829fbbd/frameset.htm]
    [Maintaining Profiles|http://help.sap.com/saphelp_nw70/helpdata/EN/c4/3a62e3505211d189550000e829fbbd/frameset.htm]
    Hope that helps.
    Joe Haynes

  • Video components not showing up in flash

    I am only using Flash MX 6, so I hope it is ok, but I am
    having a major problem.
    First I need a video component that works, hopefully there is
    a few one that is floating around out there.
    I have a QT.mov, I have converted it to flash and I drop a
    video component on it (surprisingly, it looks like the QT
    controls). I test the movie, it works, but when I use the swf in
    Dreamweaver on my page, the controls are no where to be seen. I
    can't see them, therefore they are useless to me!!I have tried Muak
    one, it doesn't seem to link to my movie no matter what I do, along
    with VideoController 1_1 which doesn't seem to show up in my movie.
    Has anyone else had this problem? How can I resolve it?
    Thanks in advance.

    1. Go to HELP > MANAGE EXTENSIONS
    2. Choose Flash
    3. Choose FILE > "Install Extension"
    4. Install xxx.mxp from below locations one of them (you may need to show system folders on Windows to see).
    5. I checked these folders on my machine but they were empty,,, but I already have components installed.
    C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration
    if u can't find it try to go to the below path:
    C:\Users\userName\AppData\Local\Adobe\Flash CS4\ar\Configuration
    and copy all files existing in this folder to:
    C:\Users\userName\AppData\Local\Adobe\Flash CS4\en\Configuration

Maybe you are looking for