Pixma IP5200 does not want to power up

Hi, I've had this printer for a few years and today when I press the power switch the printer does not power up. If I remove the power cord and wait a few minutes, plug it in again and press the power switch, the switch comes on for half a second and comes off. Do you have an idea about the problem? What can I do? Thank you! Cheers

You can check out printing shop or priting repering man hope yur problem solve it. other wise you see videos on u tube.

Similar Messages

My Ipod touch does not want to power on, has been on the computer for about two hours. no sign of life

Is there a reset button or procedure on the Ipod 8GB touch. My son was playing a recently downloaded free game (Need for Speed) when it Quit working. i have had it on the USB cable for about two hours now and it still does not want to turn on. I had to turm on Itunes when i plugged in the ipod touch, Itunes usually opens when the ipod touch is conected.

That sympton is covered here:
iPod touch: Hardware troubleshooting

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

HT1689 how can i undisable my ipod touch when itunes does not want to connect?

My brother's ipod touch 4th generation was cracked on the screen and was not able to see anything after a while. We finally fixed it and now it says "IPOD DISABLED CONNECT TO ITUNES". We tried connecting it and itunes does not want to connect because it says that the ipod has a passcode and until we unlock it, it will do it. So we our stuck and on top of that, the ipod's power button does not work, so we waited to uncharge the ipod so we can try to connect it again and it still won't do it. We do not know what to do, and we cannot afford to buy a new one. Is there a solutiong for this? Thank You.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Does not want to Turn On

I bought my iphone 5 days ago. I have been extremly careful with the iphone. Today I was making calls it was working great; When I wanted to make another call, the iphone does not want to turn on at all, I tried to see if by connecting it to the power source will turn on and also tired by using the itunes.. the funny thing it works when i want to syncronize.. but i still cant turn the iphone on.

nope still not working. I tired to resotre the phone via itunes. the screen goes with the apple logo.. but while its preparing iphone restore.. an error comes out saying cannot resotre phone.

HT201263 My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

JesusDGZ wrote:
My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?
I have no clue what you mean by "all the different methods." Here are my suggestions.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

My ipad does not want to connect to my home wifi's, worthless. why has this just happened. is apple aware?

In the last 2 days my Ipad does not want to connect to the internet via my home wifi's i have not done anything different so cany understand why this is happeniong. it just wont connect. Its a good job i have my 3g connection otherwise it would be worthless. i have tried resetting my wifi connections on my pad and unplugging the modem and resetting that. nothing is working. i have read several forums about this and seems to be an issue with a lot of ipads, i have read what you can do, however i dont think i should have to reset this, reset that, change this and change that when clearly its an apple issue.
can someone provide me with any simple way of fixing this issue. or can apple spend a little bit of their millions of dollars of profit to fix this little proble.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Macbook pro does not want to start up

Hi! I am having issues with my MacBook Pro. What's happening is that when I turn it on it does not want to load anything. I push the power button and the apple logo comes up and the little loading symbol at the bottom just keeps going around and around. I've left it on for about an hour straight to see if it finally loads or if anything happens and still I get no where. Has anyone had this issue before and if so, how was it resolved? I don't have the extend warranty from apple, so they're charging my $20 right off the back to use over the phone service. I have no problem paying for it, just rather see if there is a simple free way to get it fix instead of having to pay just to talk to someone over the phone. I also can't remember what operating system I am running on. PLEASE HELP!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Photoshop does not want to print in color anymore

Since last Friday Photoshop does not want to print in color anymore.
I am working with a Mac OS X 10.7 and a Canon Pixma printer.
When printing from the web the printer prints in color, but when I try to print a picture from Photoshop CC the picture is printed in B&W.
Can any one help me understand what is going on here?
Printer and Photoshop have always printed in color and in grayscale with no major problem till now.

Definitely check your Print settings. If you have more than one tray, they can be set differently from each other. You could be on the wrong tray as determined by your paper settings in Photoshop's Print dialog.
Here is a Help document on this subject.
Troubleshoot printing problems | Photoshop
Two ideas that stand out:
Press the Spacebar on your keyboard before you click File > Print. This process resets printer preferences that have been written into the image.
Reset Preferences: hold down cmd-opt-shift and start Photoshop. Release the keys when the "delete photoshop settings file" dialog appears and click "Yes".

Z10 does not want to switch on

Hi I was busy installing the new software for the blackberry Z10 and it said download interrupted. Usually this means just remove battery and it will continue but not this time. The phone did reboot the first time but then froze so i had to restart again now it does not want to work. Tried leaving on charge then removing battery also tried connecting it to PC to see if that would wake it up nothing. Also tried to reboot by holding down volume keys and power button. Can someone Please assist thanks

If it were me I would try an autoloader. http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Also see http://www.blackberry.com/btsc/KB27956 as an alternate potential solution.
- Ira

HT4061 i have ipad 1, face book application does not want to open

face book application does not want to open , starting 2 days ago. other system having no problem

Do you have a backup? If so you could try restoring from that. Anything you created since the backup was made will be lost.
These are the basic troubleshooting steps
Troubleshooting
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears then let go.
Backup, reset, restore on icloud or itunes or restore as new.
Place the phone into recovery mode by doing this
If this fails to fix the problem make an appointment and visit and Apple store or an authorised service provider

My CQ61-313US Notebook does not want to start up sometimes.

My notebook all of a sudden does not want to boot up properly. When I turn it on the power light comes on, the wireless icon stays red, and two lights flash on and off. One is located next to the caps lock button and the other is located above the end and page up buttons. I take out the battery and unplug the power cord, then hold down the power button for up to 30 seconds. Then I plug the power cord back in and try to restart it. I do this over and over again and if I get lucky it will boot up. What do you think is the problem here? Thanks in advance for any help anyone can give me.

"I really do not want to post a new question if someone who has helped may know an answer."
MGW, has provided the best answer for you:
+"but you should contact Apple since you are within the 90 day warranty period and the power supply might have been damaged in the repair."+
Check out the following for the closest AASP in your location:
AASP
AASP's Outside of the USA
================
http://docs.info.apple.com/article.html?artnum=304398 How to find your nearest Apple Authorized Service Provider (AASP)
Good luck!

I have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

i have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

Do you have a backup? If so you could try restoring from that. Anything you created since the backup was made will be lost.
These are the basic troubleshooting steps
Troubleshooting
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears then let go.
Backup, reset, restore on icloud or itunes or restore as new.
Place the phone into recovery mode by doing this
If this fails to fix the problem make an appointment and visit and Apple store or an authorised service provider

My ipod touch is in dfu mode and does not want to turn on.

my ipod touch is in dfu mode and does not want to turn on.

What happens when you connect the iPod to your computer and restore viia iTunes?

I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...

I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...
HELP HELP

To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

Pixma IP5200 does not want to power up

Similar Messages

Maybe you are looking for