PL/SQL code problem for LOV
Hi,
I have developed an application using Apex 4.0
Now, i am trying to make a LOV for two columns in my table. Say column A and column B.
Column A has four different values under it say x,y,z,w and column B has around 3 different values say 1,2 and 3.
How do i write a code for LOV for A and B.
SO that it shows me a drop down list for each and then display results accordingly.
Thanks
user13280446 (mind setting your name?),
The fix for this error is to find the subquery in your SQL that's returning more than one row; generally, you'll want to fix the subquery to return only one row, though in some rare situations it's appropriate to change an = to an in clause.
Example:
select *
from a_table a
where a.col1 = ( select b.col1
from b_table b
where b.col2 = 42 );Unless b.col2 is guaranteed to be unique (either PK or enforced through a unique constraint), sooner or later that subquery is going to return more than one row, producing the error you're seeing. These variations will all avoid this, though which one (if any) is/are correct is dependent on the data:
select *
from a_table a
where a.col1 = ( select min(b.col1) -- Ensure one row returned
from b_table b
where b.col2 = 42 );
select *
from a_table a
where a.col1 in ( select b.col1
from b_table b
where b.col2 = 42 );
select a.*
from a_table a,
b_table b
where a.col1 = b.col1
and b.col2 = 42;This is a very contrived example, of course, but without seeing the SQL for your LOV, we can't be any more specific than that...
-David
Similar Messages
-
for example:
update vv_om_temp_tl t
set t.inventory_item_id =(select attribute6 from mtl_system_items_b
where inventory_item_id = t.inventory_item_id
and organization_id = p_organization_id)
where exists
(select 'X'
from oe_order_lines_all ol
where ol.price_list_id in (8118,8119)
and ol.line_id = t.order_line_id);
above example update table (vv_om_temp_tl ) through update function while i want to make the same result using one sql code.
who can help me?
thanks!select decode( t.inventory_item_id,...................) inventory_item_id
from vv_om_temp_tl t,
mtl_system_items_b b,
where t.inventory_item_id = b.inventory_item_id
how to write that pl/sql code? -
AM extension:Problem in Lov.
Hi Experts,
I did an extension for the Main AM of the page..After get extended except Lov's Everthing is working fine.
Please let me know whats the problem for lov's after extend the AM.
is there any solution to resolve this.
Thanks
Bharat HegdeBharat,
If you have done the .jpx import you have to remove the VO substitution
Can be done in two ways,
1) replace the VO path with your VO
begin
jdr_utils.listCustomizations('/oracle/apps/eam/requests/server/RequestResultsVO');
end;
begin
jdr_utils.printDocument('the above qry output');
end;
Which will display your substitution VO details,this is to confirm
begin
jdr_utils.deleteDocument('<enter your VO with customization path, make sure you are not enteriing the standard VO>');
end;
do a commit;
After you run the delete script , Run the above listcustomization script to confirm ur subs is deleted.
2) And you can try via
Functionalional Administrator(responsibility) -> Personalization->Import/Export -> Personalization Repository
Query for the Document Path /oracle/apps/eam/requests/server/
You should see ur custom ,delete from there.
Thanks.
With Regards,
Kali.
OSSi. -
Hello,
I'd really like to see the SQL code generated for a webi request in XI version 3.0. Could you help me please ?
In webi XI R2, you have a little button "i"sql that open the windows with the code (from the request) ; I find this functionality quite practical to look for a bug !
Thank you for your answer,
Regards,
CamilleHi Camille,
If it is built over a Relational DB eg Oracle and you have the permission granted then you should be able to see the SQL Viewer button.
If your universe is connecting to a OLAP Cube, SAP BEx query or anyother data source based on MDX then it will not be available.
If this is not the case for you I would report it as a bug.
Regards
Alan -
Hello All,
Does anyone know if it possible to get SQL code ouput for the rules resulting from clustering?
Thanks,
AlanI'm still not sure that I understand what you are doing...
You're using SQL Developer. Are you using Oracle Data Mining? Unfortunately, Oracle the corporation and Oracle the database use the term "cluster" in a lot of different places so it has a lot of potential meanings. It sounds like you're trying to run a clustering algorithm using Oracle Data Miner on a sample data set.
If that's the case, you probably want to post this over in the Data Mining
Justin -
Can I have a PL/SQL code for LOV
Hi,
I apologize for this dumb question. I have been so out of touch with dev (almost 8 years). Plus new to pl/sql.
I am creating a status report application. On the dashboard, I currently have some metrics (horizontal charts). I wanted to expose these metrics based on filter.
I had created 2 filters. The first one will identify the type (Week, Month, Qtr or Year) and the 2nd filter would be based on the type. For e.g. if I select Month as type, the 2nd filter should show May-12, April-12 etc. Once I select the 2nd filter, I should use them to show the appropriate metrics. The metric that I currently have would show all the projects that users have worked on during the week/month/qtr or year (depending on the 1st and 2nd filter).
On the dashboard region, I added a condition to check if the value for both 1st and 2nd filter is not null. This allows me to show the dashboard only if the 2 filters have been selected.
For the 2nd filter, I need to write a PL/SQL code to show the LOV.
I am assuming that the pl/sql would return a SQL query. The SQL query will be based on week, month etc. Is that right?
Thanks
balaji
Edited by: user644868 on May 17, 2012 11:29 AMrbalaji2026 wrote:
For the 2nd filter, I need to write a PL/SQL code to show the LOV. Doesn't appear necessary. With filter 2 cascading from filter 1, why not:
select
/* Week query */
from
where
and :p1_filter_1 = 'WEEK'
union all
select
/* Month query */
from
where
and :p1_filter_1 = 'MONTH'
union all
select
/* Quarter query */
from
where
and :p1_filter_1 = 'QUARTER'
union all
select
/* Year query */
from
where
and :p1_filter_1 = 'YEAR' -
Problem compiling PL/SQL code
I am having problmes compiling the following piece of pl/sql
code:
declare
v_servicekey services.servicekey%type;
v_tmodelkey tmodels.tmodelkey%type;
l_bindingid bindingtemplates.bindingid%type;
i_rowlimit number(28);
begin
select bindingid
into l_bindingid
from
(select b.bindingid as bindingid,
b.bindingkey,
nvl(b.accesspointurltype,''),
nvl(b.accesspointurl,''),
nvl(b.hostingredirector,''),
b.updated
from bindingtemplates b, services s
where s.serviceid=b.serviceid
and s.servicekey=v_servicekey
and (b.bindingid in (select i.bindingid
from instances
i,tmodels t
where
t.tmodelid=i.tmodelid
and
t.tmodelkey=v_tmodelkey)
or (b.hostingredirector is not
null
and b.hostingredirector in
(select bindingkey
from bindingtemplates
where bindingid in (select i.bindingid
from instances i,tmodels t
where t.tmodelid = i.tmodelid
and t.tmodelkey = v_tmodelkey))))
order by b.updated)
where rownum <= i_rowlimit;
end;
I get the compilation error
ERROR at line 30:
ORA-06550: line 30, column 27:
PLS-00103: Encountered the symbol "ORDER" when expecting one of
the following:
) * & = - + < / > in mod not rem with an exponent (**)
<> or != or ~= >= <= <> and or like between group having
intersect minus start union where connect is null is not ||
is dangling year DAY_
The symbol ")" was substituted for "ORDER" to continue.
ORA-06550: line 30, column 45:
PLS-00103: Encountered the symbol ")" when expecting one of the
following:
. ( , * @ % & - + ; / for mod rem an exponent (**) asc desc
||
Obviously there is only one SQL and it is complaining about the
ORDER BY clause. Please ignore the values for the host variables.
The same SQL when run from the SQL prompt with values
substituted for the host variables runs perfectly well. Am I
missing something or is there a catch with Oracle PL/SQL.
Please enlighten.
Thankssee
http://forums.oracle.com/forums/message.jsp?id=500260
I want to know that if there is any PL/SQL commad for compiling the code?
My problem is, I am working in an environment where we are using a Database tool named TOAD of QUEST Software. Every body can look into the code. I just want to hide this code from others. A Quick reply in this regard will be really very helpful. -
Explain plans for PL/SQL code?
Hi!
I am pulling SQL statements (select, insert, update, delete, etc.) from PL/SQL code and producing explain plans. Some of the delete statements have "WHERE CURRENT OF" in them which produces an ORA-3001 error (feature not implemented) error. How can I do an explain plan of these statements? Can I replace "WHERE CURRENT OF" with "=" to get a plan? How far off will the plan be? Any suggestions, ideas, etc. greatfully appreciated!
This is Oracle 9.2.0.4/5 on AIX if it makes a difference.
Thanks!
Dave VenusWHERE CURRENT OF shouldn't be a problem. Here above an example on 9.2.0.4 on AIX5.2 :
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.4.0 - Production
SQL> create table TBL_USER_PROFILE_CATEGORY
2 as
3 select 654 id_category, 1103 id_user from dual union all
4 select 654 id_category, 1104 id_user from dual union all
5 select 18 id_category, 1103 id_user from dual union all
6 select 629 id_category, 1103 id_user from dual union all
7 select 110 id_category, 1103 id_user from dual union all
8 select 110 id_category, 1104 id_user from dual union all
9 select 18 id_category, 1104 id_user from dual union all
10 select 37 id_category, 1103 id_user from dual union all
11 select 24 id_category, 1103 id_user from dual union all
12 select 7 id_category, 104 id_user from dual union all
13 select 37 id_category, 1104 id_user from dual union all
14 select 22 id_category, 1103 id_user from dual union all
15 select 22 id_category, 1104 id_user from dual union all
16 select 25 id_category, 1104 id_user from dual union all
17 select 25 id_category, 1103 id_user from dual ;
Table created.
SQL>
SQL> alter table TBL_USER_PROFILE_CATEGORY add primary key (id_category, id_use
Table altered.
SQL>
SQL> CREATE OR REPLACE
2 PROCEDURE P$UPDATE_TBL_USER_PROFILE_CAT(p_id_cat_old IN NUMBER) AS
3 p_id_category number;
4 p_id_user number;
5 cursor mycur is select id_category, id_user
6 from TBL_USER_PROFILE_CATEGORY
7 where id_category = p_id_cat_old
8 for update of id_category;
9 BEGIN
10 open mycur;
11 LOOP
12 FETCH mycur INTO p_id_category, p_id_user;
13 EXIT WHEN mycur%NOTFOUND;
14 BEGIN
15 DELETE FROM TBL_USER_PROFILE_CATEGORY
16 WHERE CURRENT OF mycur;
17 END;
18 END LOOP;
19 CLOSE mycur;
20 COMMIT;
21 EXCEPTION WHEN OTHERS THEN rollback;
22 END;
23 /
Procedure created.
SQL>
SQL> exec P$UPDATE_TBL_USER_PROFILE_CAT(654)
PL/SQL procedure successfully completed.
SQL> select * from TBL_USER_PROFILE_CATEGORY;
ID_CATEGORY ID_USER
18 1103
629 1103
110 1103
110 1104
18 1104
37 1103
24 1103
7 104
37 1104
22 1103
22 1104
25 1104
25 1103
13 rows selected.
SQL> Please, paste here what's your code...
Nicolas. -
Problem for creation of PO for different company code
I have problem for creation of PO using ME21 for different company code.Order is not created.
Please give reply it is urgent.Hi Mansih,
I don´t understand what is your exact problem, as I don´t see any company code being specified. But maybe you should check in XK03 that the vendor master data is created for this company code/purchasing organisation!
Have a nice day! -
I have a problem for download in app store . it shows error code : 1009
i have a problem for download in app store . it shows error code : 1009
https://discussions.apple.com/thread/2439043
-
Hi,
I need a PL/SQL code for this one...
Let me know if something is not clear...
1) The table CLOB_CLOBJECT_CDA has the columns described below...
Explaining only those fields which are important in this context
-- CDA_STEP_ID : Basically a Sequence
-- CLOBJECT_SOURCE1_ID : Every id has got a set of records
-- CLOBJECT_SOURCE2_ID : Every id has got a set of records
-- LVL : There are total 8 levels..
This is the main aim :
1) There are total 16 million rows..(limited to 10 rows here)
2) We need to go through level by level (LVL column) & insert the intersection records (CLOBJECT_SOURCE1_ID intersect CLOBJECT_SOURCE2_ID)
into another table...but this is how it goes..
Level (LVL column) 3's basically have CLOBJECT_SOURCE1_ID as level (LVL column) 2 CDA_STEP_ID's..
(consider the statement --** where CLOBJECT_SOURCE1_ID = 285 which is same as 1st insert statement step id)..
The above process goes for next levels until 8..(so have to use loops)
So for ex :
We go through the first insert statement and insert the insertion records only when both CLOBJECT_SOURCE1_ID & CLOBJECT_SOURCE2_ID has got records ..
If we don't find any records for both of them we should skip the corresponding step id when we go to the next levels...
Let's go through the 1st insert statement...
-- We have CDA_STEP_ID = 285 & two sources CLOBJECT_SOURCE1_ID as 19 & CLOBJECT_SOURCE2_ID as 74...
-- We see the table CLOBJECT_COUNTS & check whether we have counts for both 19 & 74 ..(In fact we insert counts into this table only if they have records)
-- If so, we insert the intersection records into CDA_MRN_RESULTS ( we do have counts for both of them..) with CDA_STEP_ID 285...
-- Then we insert the step id which is 285 along with the count into CLOBJECT_COUNTS..
Let's go through another insert statement...
-- Consider CDA_STEP_ID = 288 which has two sources CLOBJECT_SOURCE1_ID as 19 & CLOBJECT_SOURCE2_ID as 92...
-- We see the table CLOBJECT_COUNTS & check whether we have counts for both 19 & 92 ..(we have records for 19 but not for 92)
-- So we should not proceed with this..& also skip all those records (future records with increasing levels..basically level 3's) which have got 288 as CLOBJECT_SOURCE1_ID..
(As said earlier that the present CDA_STEP_ID will always be CLOBJECT_SOURCE1_ID in the next level)...
I wrote the following code which is after the statement...
Let me have the create & insert statements here..
create table CLOB_CLOBJECT_CDA
CDA_STEP_ID NUMBER,
CDA_ID NUMBER,
CDA_SEQ_NUMBER NUMBER,
CLOBJECT_SOURCE1_TYPE VARCHAR2(3000),
CLOBJECT_SOURCE1_ID NUMBER,
CLOBJECT_OPERATOR VARCHAR2(3000),
CLOBJECT_SOURCE2_TYPE VARCHAR2(3000),
CLOBJECT_SOURCE2_ID NUMBER,
LVL NUMBER
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (285, 285, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 74, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (286, 286, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 75, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (287, 287, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 91, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (288, 288, 1, 'CLOBJECT', 19, 'INTERSECT', 'CLOBJECT', 92, 2);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4869, 4869, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 91, 3); -- **
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4870, 4870, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 92, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4871, 4871, 1, 'CDA_STEP', 285, 'INTERSECT', 'CLOBJECT', 93, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4880, 4880, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 91, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4881, 4881, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 92, 3);
insert into clob_clobject_cda (CDA_STEP_ID, CDA_ID, CDA_SEQ_NUMBER, CLOBJECT_SOURCE1_TYPE, CLOBJECT_SOURCE1_ID, CLOBJECT_OPERATOR, CLOBJECT_SOURCE2_TYPE, CLOBJECT_SOURCE2_ID, LVL)
values (4882, 4882, 1, 'CDA_STEP', 286, 'INTERSECT', 'CLOBJECT', 93, 3);
create table CDA_MRN_RESULTS
CDA_STEP_ID NUMBER,
MRN NUMBER,
INSERT_DATE_TIME DATE
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (19, 3, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (74, 4, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 1, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (75, 6, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (91, 2, to_date('19-10-2011', 'dd-mm-yyyy'));
insert into cda_mrn_results (CDA_STEP_ID, MRN, INSERT_DATE_TIME)
values (91, 3, to_date('19-10-2011', 'dd-mm-yyyy'));
create table CLOBJECT_COUNTS
CDA_STEP_ID NUMBER,
CLOBJECT_COUNT NUMBER,
DATE_TIME DATE
Insert into CLOBJECT_COUNTS values (19,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (74,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (75,3, to_date('19-10-2011', 'dd-mm-yyyy'));
Insert into CLOBJECT_COUNTS values (91,2, to_date('19-10-2011', 'dd-mm-yyyy'));The output goes into two tables...
CDA_MRN_RESULTS : O/p of intersection records between source1 & source2 id
CLOBJECT_COUNTS : Step id with counts ...(useful for skipping next level step id's if either of source id has "0" counts)
Any help is appreciated..
Thanks..I tried to code this..but looping takes a lot of time..I want to skip certain rows where source1_step_id & source_2_step_id are not in clobject_counts table as we proceed to the next levels..Not sure how to skip the rows..
declare
cursor c1 (p_level varchar2 ) is
Select * from clob_clobject_cda
where lvl = p_level ;
TYPE V_TT IS TABLE OF C1%ROWTYPE INDEX BY PLS_INTEGER;
L_TT V_TT;
v1 number;
v2 number;
v_step_id number;
v_operator varchar2(100) := '';
begin
for i in 2..8 loop
open c1(i);
LOOP
FETCH C1 BULK COLLECT INTO L_TT LIMIT 500;
FOR indx IN 1 .. L_TT.COUNT
LOOP
v1 := L_TT(indx).clobject_source1_id;
v2 := L_TT(indx).clobject_source2_id;
v_step_id := L_TT(indx).cda_step_id;
v_operator := L_TT(indx).clobject_operator;
Execute Immediate ('Insert into cda_mrn_results Select --+ parallel (cm 128)
distinct ' || v_step_id || ', mrn, trunc(sysdate) dt from cda_mrn_results cm
where cda_step_id = ' || v1 || '
and cda_step_id in (Select cda_step_id from clobject_counts) ' ||
v_operator ||
' Select --+ parallel (cm 128)
distinct ' || v_step_id || ', mrn, trunc(sysdate) dt from cda_mrn_results cm
where cda_step_id = ' || v2 || '
and cda_step_id in (Select cda_step_id from clobject_counts) ' );
Insert --+ Append
into clobject_counts Select cda_step_id, count(distinct mrn),
insert_date_time dt from cda_mrn_results where cda_step_id = v_step_id group by cda_step_id,insert_date_time;
COMMIT;
END LOOP;
EXIT WHEN L_TT.COUNT = 0;
END LOOP;
CLOSE C1;
End Loop;
Commit;
End; -
SQL*Loader problem - not efficient, parsing error for big xml files
Hi Experts,
First of all, I would like to store xml files in object relation way. Therefore I created a schema and a table for it (see above).
I wants to propagate it (by using generated xml files), hence I created a control file for sql loader (see above).
I have two problems for it.
1, It takes a lot of time. It means I can upload a ~80MB file in 2 hours and a half.
2, At bigger files, I got the following error messages (OCI-31011: XML parsing failed OCI-19202: Error occurred in XML processing LPX-00243: element attribute value must be enclosed in quotes). It is quite interesting because my xml file is generated and I could generated and uploaded the first and second half of the file.
Can you help me to solve these problems?
Thanks,
Adam
Control file
UNRECOVERABLE
LOAD DATA
CHARACTERSET UTF8
INFILE *
APPEND
INTO TABLE coll_xml_objrel
XMLTYPE(xml)
FIELDS
ident constant 2
,file_name filler char(100)
,xml LOBFILE (file_name) TERMINATED BY EOF
BEGINDATA
generated1000x10000.xml
Sql Loader command
sqlldr.exe username/password@//localhost:1521/SID control='loader.ctl' log='loadr.log' direct=true
Schema
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://www.something.com/shema/simple_searches" elementFormDefault="qualified" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://www.something.com/shema/simple_searches">
<element name="searches" type="tns:searches_type"></element>
<element name="search" type="tns:search_type"></element>
<element name="results" type="tns:results_type"></element>
<element name="result" type="tns:result_type"></element>
<complexType name="searches_type">
<sequence>
<element ref="tns:search" maxOccurs="unbounded"></element>
</sequence>
</complexType>
<complexType name="search_type">
<sequence>
<element ref="tns:results"></element>
</sequence>
<attribute ref="tns:id" use="required"></attribute>
<attribute ref="tns:type" use="required"></attribute>
</complexType>
<complexType name="results_type">
<sequence maxOccurs="unbounded">
<element ref="tns:result"></element>
</sequence>
</complexType>
<complexType name="result_type">
<attribute ref="tns:id" use="required"></attribute>
</complexType>
<simpleType name="type_type">
<restriction base="string">
<enumeration value="value1"></enumeration>
<enumeration value="value2"></enumeration>
</restriction>
</simpleType>
<attribute name="type" type="tns:type_type"></attribute>
<attribute name="id" type="string"></attribute>
</schema>
Create table
create table coll_xml_objrel
ident Number(20) primary key,
xml xmltype)
Xmltype column xml
store as object relational
xmlschema "http://www.something.com/schema/simple_searches.xsd"
Element "searches";Hi Odie_63,
Thanks for your answer.
I will post this question in the XML DB forum too (edit: I realized that you have done it. Thanks for it).
1, Version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
2, see above
3, I have registered my schema with using dbms_xmlschema.registerSchema function.
Cheers,
Adam
XML generator:
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import javax.xml.stream.XMLOutputFactory;
import javax.xml.stream.XMLStreamException;
import javax.xml.stream.XMLStreamWriter;
public class mainGenerator {
public static void main(String[] args) throws FileNotFoundException, XMLStreamException {
// TODO Auto-generated method stub
final long numberOfSearches = 500;
final long numberOfResults = 10000;
XMLOutputFactory xof = XMLOutputFactory.newFactory();
XMLStreamWriter writer = xof.createXMLStreamWriter(new FileOutputStream("C:\\Working\\generated500x10000.xml"));
writer.writeStartDocument();
writer.writeStartElement("tns","searches", "http://www.something.com/schema/simple_searches");
writer.writeNamespace("tns", "http://www.something.com/schema/simple_searches");
for (long i = 0; i < numberOfSearches; i++){
Long help = new Long(i);
writer.writeStartElement("tns","search", "http://www.something.com/schema/simple_searches);
writer.writeAttribute("tns", "http://www.something.com/schema/simple_searches", "type", "value1");
writer.writeAttribute("tns", "http://www.something.com/schema/simple_searches", "id", help.toString());
writer.writeStartElement("tns","results", "http://www.something.com/schema/simple_searches");
for (long j = 0; j < numberOfResults; j++){
writer.writeStartElement("tns","result", "http://www.something.com/schema/simple_searches");
Long helper = new Long(i*numberOfResults+j);
writer.writeAttribute("tns", "http://www.something.com/schema/simple_searches", "id", helper.toString());
writer.writeEndElement();
writer.writeEndElement();
writer.writeEndElement();
writer.writeEndElement();
writer.writeEndDocument();
writer.close();
registerSchema:
begin
dbms_xmlschema.registerSchema(
'http://www.something.com/schema/simple_searches',
'<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://www.something.com/schema/simple_searches" elementFormDefault="qualified" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://www.something.com/schema/simple_searches">
<element name="searches" type="tns:searches_type"></element>
<element name="search" type="tns:search_type"></element>
<element name="results" type="tns:results_type"></element>
<element name="result" type="tns:result_type"></element>
<complexType name="searches_type">
<sequence>
<element ref="tns:search" maxOccurs="unbounded"></element>
</sequence>
</complexType>
<complexType name="search_type">
<sequence>
<element ref="tns:results"></element>
</sequence>
<attribute ref="tns:id" use="required"></attribute>
<attribute ref="tns:type" use="required"></attribute>
</complexType>
<complexType name="results_type">
<sequence maxOccurs="unbounded">
<element ref="tns:result"></element>
</sequence>
</complexType>
<complexType name="result_type">
<attribute ref="tns:id" use="required"></attribute>
</complexType>
<simpleType name="type_type">
<restriction base="string">
<enumeration value="value1"></enumeration>
<enumeration value="value2"></enumeration>
</restriction>
</simpleType>
<attribute name="type" type="tns:type_type"></attribute>
<attribute name="id" type="string"></attribute>
</schema>',
TRUE, TRUE, FALSE, FALSE);
end -
OnClick for PL/SQL Code???
Hello,
I created a form and added a button. When that button is pressed, I want to execute PL/SQL code. In the list of JavaScript Event Handlers there is an event 'OnClick'. But I see nothing simular for the PL/SQL Button Event Handler.
Where do I have to put my code?
Thanks for your help.
Nancy.I don't know how it is on this special app but what I do know is You have to submit Your form because PL?SQL procedures run only on server
So You click on a button, link or whatever, PL/SQL procedure runs on the server and generates something to output again to client -
Problems compiling PL/SQL code
I am having problmes compiling the following piece of pl/sql
code:
declare
v_servicekey services.servicekey%type;
v_tmodelkey tmodels.tmodelkey%type;
l_bindingid bindingtemplates.bindingid%type;
i_rowlimit number(28);
begin
select bindingid
into l_bindingid
from
(select b.bindingid as bindingid,
b.bindingkey,
nvl(b.accesspointurltype,''),
nvl(b.accesspointurl,''),
nvl(b.hostingredirector,''),
b.updated
from bindingtemplates b, services s
where s.serviceid=b.serviceid
and s.servicekey=v_servicekey
and (b.bindingid in (select i.bindingid
from instances
i,tmodels t
where
t.tmodelid=i.tmodelid
and
t.tmodelkey=v_tmodelkey)
or (b.hostingredirector is not
null
and b.hostingredirector in
(select bindingkey
from bindingtemplates
where bindingid in (select i.bindingid
from instances i,tmodels t
where t.tmodelid = i.tmodelid
and t.tmodelkey = v_tmodelkey))))
order by b.updated)
where rownum <= i_rowlimit;
end;
I get the compilation error
ERROR at line 30:
ORA-06550: line 30, column 27:
PLS-00103: Encountered the symbol "ORDER" when expecting one of
the following:
) * & = - + < / > in mod not rem with an exponent (**)
<> or != or ~= >= <= <> and or like between group having
intersect minus start union where connect is null is not ||
is dangling year DAY_
The symbol ")" was substituted for "ORDER" to continue.
ORA-06550: line 30, column 45:
PLS-00103: Encountered the symbol ")" when expecting one of the
following:
. ( , * @ % & - + ; / for mod rem an exponent (**) asc desc
||
Obviously there is only one SQL and it is complaining about the
ORDER BY clause. Please ignore the values for the host variables.
The same SQL when run from the SQL prompt with values
substituted for the host variables runs perfectly well. Am I
missing something or is there a catch with Oracle PL/SQL.
Please enlighten.
Thanks"Order by" can not be used in the subqueries.
Order by should always be specified in the outer query only.
rajkiran -
Code beautifier for PL/SQL
Does anyone know of a good code beautifier for PL/SQL?
A tool called "Formatter Plus" is available to do this job. You can download the tool from the Revealnet (recently acquired by Quest software) web site.
The URL is http://www.quest-pipelines.com/
I downloaded the 'free trail' version and it asked my
to enter the license key, which they don't supply!
WHAT A PIECE OF JUNK!
Maybe you are looking for
-
My father, sister and I share the same Apple ID account,
But since I got my new iPhone C a few days ago, it is not allowing any of us to download any apps on the current Apple ID we all share. Is there any way I can create my own Apple ID without screwing up my sister or fathers phone? Please help!
-
Displaying image from Database with php
Hello everybody, I'm working on a website that displays videos courses and tutorials as my final project and I'm working with "Flash builder 4" the database with mySQL and the application server with php Basically, the goal is to display a datagrid t
-
sometimes when I try to make a call to someone, I can't hear the connecting tone im my phone, but the other party's phone is ringing. I have to end the call again and make another attempt. The connecting tone could only be heard after I made a redi
-
How to use the Zoom for Pocket PC 2003?
I try to use the LabVIEW7.1 PDA module zoom feature in my Pocket PC 2003. But I can not make it works right. For example, if I try to zoom to rectangle, the graph does not draw in the selected rectangle. I attached my code. Attachments: sin.vi 48 KB
-
Display Blob content in HTML Region
Hello, I'm trying to display the contents of an .htm file in an html region. I can get it to display as a link but I can't get it to display as an image. I have a page item that is display as text (do not save state). For the source value I use a PL/