Pl/sql Custom Authentication is not working. DADs.conf is fine.

Hi All,
We have configured authentication mode to customowa in the dads.conf. same configuration is working in one instance, while it is not working on other instance.
Please advice me to find the solution.
Error message from the error_log is as follows.
mod_plsql: /imguat/mvt_cover_page.Instructions HTTP-403 ORA-0
Enabled the debug on in plsql.conf
the log file shows the following information.
if (owa_custom.authorize = TRUE) then
:authorized := 'yes';
else
:authorized := 'no';
end if;
:realm := owa.protection_realm;
end; successfully executed
<835614824 ms>(wpca.c,389) wpcaexe: function owa_custom.authorize returned no
<835614824 ms>(wpca.c,391) wpcaexe: Auth Realm set to
<835614824 ms>(wpcs.c, 77) Executed 'begin dbms_session.reset_package; end;' (rc=0)
<835614824 ms>(wpca.c,215) wpcauth: authorize returned 0
<835614824 ms>Custom auth failed without setting realm
<835614824 ms>/imguat/MVT_Web_Style.Style2 HTTP-403 ORA-0
Your help is highly appreciated.
Regards
Jaani.

Similar Messages

MAC Authentication does not work

My MAC Authentication does not work.
I have a ACS 3.0 server set. the MAC address is set in the user name field and in the password field.
I can ping the ACS, I can ping my AP, I can ping my client.
I don't want WEP and I don't want LEAP just MAC. So I set my authentication to "Open with MAC" My client has WEP set to NO WEP and authentication to OPEN
I have the latest drivers for both AP and my 350 Client.
I see that the client is associating and disassociating back and forth non stop. My AP log is full with the following message:
Station 0009.7c9f.xxxx Authentication failed
this is my config:
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname GOM_1200IOS
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
server 10.1.2.197 auth-port 1812 acct-port 1812
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius wlccp_rad_infra
aaa group server radius wlccp_rad_eap
aaa group server radius wlccp_rad_leap
aaa group server radius wlccp_rad_mac
aaa group server radius wlccp_rad_any
aaa group server radius wlccp_rad_acct
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login wlccp_infra group wlccp_rad_infra
aaa authentication login wlccp_eap_client group wlccp_rad_eap
aaa authentication login wlccp_leap_client group wlccp_rad_leap
aaa authentication login wlccp_mac_client group wlccp_rad_mac
aaa authentication login wlccp_any_client group wlccp_rad_any
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa accounting network wlccp_acct_client start-stop group wlccp_rad_acct
aaa session-id common
enable secret xxxxxx
username Cisco password xxxx
ip subnet-zero
iapp standby timeout 5
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption key 1 size 40bit 7 9DF1C10BF11A transmit-key
ssid GOM_1230
authentication open mac-address mac_methods
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
channel 2462
station-role root
no cdp enable
dot1x reauth-period server
dot1x client-timeout 600
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no cdp enable
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 172.16.43.45 255.255.240.0
no ip route-cache
ip default-gateway 172.16.47.254
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
access-list 700 permit 000a.b74c.e8c9 0000.0000.0000
access-list 700 permit 0009.7c9f.d6e0 0000.0000.0000
access-list 700 permit 0006.25b1.2f79 0000.0000.0000
access-list 700 permit 000a.b78b.2d19 0000.0000.0000
access-list 700 permit 000b.5f6e.77c8 0000.0000.0000
access-list 700 deny 0000.0000.0000 ffff.ffff.ffff
access-list 701 deny 000b.5f6e.77c8 0000.0000.0000
access-list 701 permit 0000.0000.0000 ffff.ffff.ffff
no cdp run
snmp-server community GOM_AP1230 RO
snmp-server enable traps tty
radius-server local
group AP1230
user brazil nthash 7 1249523544595F517972017912677A3055325A25770B08770D5C5B4E4478087605 group AP1230
radius-server host 10.1.2.197 auth-port 1812 acct-port 1812 key 7 00233C2B
radius-server retransmit 3
radius-server attribute 32 include-in-access-req format %h
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 5 15
end
What is wrong?
Thanks very much for your help.

I figured out what was wrong so thank you for stopping by.
I will publish the config for other people to see.
Regards,

Ukelele generated custom keyboard layouts not working in Lion?

I asked this question in the stackexchange site a few days ago. Nothing I've tried has worked so far, except for creating a new account. Because a fresh account works, it's got to be something with my preferences, right?
http://apple.stackexchange.com/questions/21691/ukelele-generated-custom-keyboard -layouts-not-working-in-lion
Here's the question from above:
I created a custom keyboard layout with Ukelele (http://scripts.sil.org/ukelele) in Snow Leopard (idea is to generate scandinavian letters with Alt-key, otherwise have a pretty much standard U.S. layout). After the upgrade, the old installed (to ~/Library/Keyboard Layouts) layout wasn't working.
Ukelele seems to work OK in Lion, but whether I put the generated keylayout in a bundle or single file, or save it "/Library/Keyboard Layouts" or "~/Library/Keyboard Layouts" doesn't seem to matter.
Help?
EDIT:
@Sergio, I cannot choose the layout in Input Sources. One keylayout file I tried:http://semeai.org/~sjl/us-scands.keylayout
[EDIT: Removed unrelated stuff]
UPDATE 2011/08/15:
@Tom:
Copied your keylayout (it naturally ended up in my Junk folder):
midgard (01:55) >ls -l ~/Library/Keyboard\ Layouts/MongolianQWERTY.keylayout-rw-r--r--@ 1 sjl staff 44536 Mar 13 2008 /Users/sjl/Library/Keyboard Layouts/MongolianQWERTY.keylayout
Logged out, logged in, isn't showing in Input sources (I'm looking very closely between "Maori" and "Myanmar - QWERTY").
I've also uninstalled bunch of software and plugins giving suspicious messages to system.log, but hasn't helped.
UPDATE 2011/08/16:
I created a test account, and lo, the layout works perfectly for it. Also the bug in preferences doesn't show for that account. When trying this on my own account, there are no errors in Console logs with the suggested keywords (I can't seem to locate console.log file, though).
UPDATE 2011/08/16 later:
Nuking Library/Caches (and relogging) didn't help.
UPDATE 2011/08/17:
I did
% find Library -name "*.plist" -exec mv {} {}.renamed \;
and restarted, but it didn't help. I restored the situation with
% for file in `find Library -name "*.plist.renamed"`; \ do mv "$file" "${file//.renamed/}"; done
addendum: I also went through all the .plist files with plutil -s as described inhttp://www.askdavetaylor.com/can_i_check_my_plist_files_in_mac_os_x_for_problems .html. There was some brokennes, but in very unrelated applications.

Tom,
I think I love you.
That absolutely did it! Thanks so much!
If you'll answer with the same link in the stackexchange site, I'll mark the answer as correct, so you'll get the rep there.
Thanks,
Sami

Safari 5.1 customized keyboard shortcut not working

I've just updated safari on snow leopard and my customized keyboard shortcut: go to next/previous panel (ctrl -> and ctrl <-) don't work anymore even if i set them in my system preferences

I'm also experiencing issues with custom keyboard shortcuts not working after the update to Safari 5.1. I had no problems with the previous version of Safari.... I wish I had not updated.

Authentication function not working in APEX but works in pl/sql

Greetings, Jim here.
I have written a very simple authentication funtion which uses the dbms_ldap package to authenticate using the userid and password from the login page.
I've tested this function thru pl/sql and it returns true and false accordingly.
I've created a custom authentication schema and in the authentication function I have return myfunction;
The problem is, when called thru APEX, it appears to always return true and lets the login proceed, even if the password is correct. I know its using the function due to the fact that if I enter a bogus function as the authentication function, APEX spits up a message saying so.
So, I know the function works, but I don't know why it does not work with APEX. Posting function below.
CREATE OR REPLACE FUNCTION ODBS.CUSTAPEXLOGIN (p_username IN VARCHAR2,p_password IN VARCHAR2)
RETURN BOOLEAN AS
retval PLS_INTEGER;
emp_session DBMS_LDAP.session;
ldap_host VARCHAR2(256);
ldap_port VARCHAR2(256);
ldap_user VARCHAR2(256);
ldap_passwd VARCHAR2(256);
ldap_base VARCHAR2(256);
BEGIN
ldap_host := 'oraldap';
ldap_port := '389';
ldap_user := p_username;
ldap_passwd := p_password;
ldap_base := 'cn=users,dc=company,dc=com';
emp_session := DBMS_LDAP.init(ldap_host,ldap_port);
retval := DBMS_LDAP.simple_bind_s(emp_session,('cn=' || ldap_user || ',' || ldap_base),ldap_passwd);
if retval = 0 then
return true;
else
return false;
end if;
EXCEPTION
WHEN OTHERS THEN
begin
if sqlcode = -31202 then
return false;
end if;
end;
END;
/

Hi Jim,
Can you clarify this -
The problem is, when called thru APEX, it appears to always return true and lets the login >proceed, even if the password is correctThat implies you're saying your authentication function ALWAYS returns true? Is that correct? Also 'even if the password is correct' doesn't read correctly to me, did you mean 'even if the password is incorrect'?
You then say -
now the function works, but I don't know why it does not work with APEX.So by 'does not work' you mean in APEX it is always returning true therefore allowing you to login regardless of the username/password you use? Is that correct?

Custom rendering extensions not working in SSRS Report Designer (rsreportdesigner.config)

My custom rendering extension is working in Report Builder (in RSReportServer.config), but not in Report Designer (in RSReportDesigner.config): instead of adding a "TXT" export option, it's just adding a duplicate "CSV" option.
SUMMARY:
Is there a way to get these features working, with Report Designer?
DETAILS:
We are running SSRS (Reporting Services) under SQL Server 2008 R2.
Here's my rendering section:
    <Render>
      <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering" />
      <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering" />
      
      <Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TXT(ASCII,NoColHds)</Name>
       </OverrideNames>
       <Configuration>
          <DeviceInfo>
              <FileExtension>txt</FileExtension>
               <FieldDelimiter>,</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <NoHeader>true</NoHeader>
           </DeviceInfo>
       </Configuration>
      </Extension>
      <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering" />
      <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering" />
      <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" />
      <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering" />
      <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" />
      <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering" />
      <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering" />
    </Render>
When I add the above "TXT" section to RSReportServer.config, then Report Builder (and production) both show an export option "TXT(ASCII,NoColHds)".
But when I add this "TXT" section to RSReportDesigner.config, and then (in Report Designer / BIDS) attempt to export from a "Preview" of the report, the export drop-down does not show a "CSV" option followed by a "TXT"
option, but instead shows the "CSV" option twice.
This simply limits testing of the export option, to Report Builder... or requires any reports be published from Report Designer before they can be tested with
this export option.
(FYI, why this export option: compliance in our industry requires sending data to government agencies, in text files, with fixed-length columns, and ASCII encoding. Also, we're attempting to give the production of these files to the *users* managing
communication with those agencies... so we're putting them into SSRS.
I worked around the fixed length columns (and no delimiters -- no commas), by writing a version of the report where all string columns are padded, and all columns are concatenated, to form ONE LONG COLUMN... but Reporting Services' CSV export format produces
a Unicode file (UTF-8, which the agency rejected, because it had a leading "ï»¿", or "EF BB BF" in hex), whereas the agency requires an ASCII file.)

Hi Doug_atMidway,
According to your description, you want to enable your custom render extension. Right?
In Reporting Services, if you want to deploy the custom extension, you just need to add the extension into rsreportserver.config file. The
RSReportDesigner.config file stores settings about the rendering extensions available to Report Designer. Since you still use the csv rendering extension in your assembly, we don't need to do any modification in rsreportdesigner.config file. Pleaes
refer to the links below:
Thanks for attempting to help, Simon.
As my question states, I've *already done* both the above: changed (1) rsreportserver.config and (2) rsreportdesigner.config. I added the same code, shown above, to both files. I did that so I could see the new "txt" extension
both (1) when exporting in production and Report Builder, and (2) when exporting in Report Designer's "preview".
The change in (2) is not working: I do not see the "TXT" extension in Report Designer, when I try to export from a preview. Instead, Report Designer shows the CSV extension repeated.
Thanks for the docs. I consulted them (well, I consulted the EQUIVALENT pages, for SQL Server 2008 R2), when creating my block of code above.
Do you see anything to correct, in my code?
Are the features I'm using actually working, with rsreportdesigner.config?
Thanks again,
-- Doug

ADF Custom error handler not working.

Hi All,
i am using jdev version 11.1.1.5.0. i have created one custom error handler class in model layer which extend DcErrorHandlerImpl class.
and do the entry in Databinding.cpx file
*<Application ErrorHandlerClass="mypackage.classname"/>*
i have override getDisplayMessage(BindingContext ctx, Exception ex) method to show SQL Exception which comes from database table trigger.
code is following-
package com.in.jagran.view.services;
    import java.sql.SQLException;
    import oracle.adf.model.BindingContext;
    import oracle.adf.model.binding.DCErrorHandlerImpl;
    import oracle.jbo.JboException;
    public class AclasErrorHandler extends DCErrorHandlerImpl {
      public AclasErrorHandler(boolean setToThrow) {
        super(setToThrow);
        System.out.println("Inside Error Handler class");
      public AclasErrorHandler() {
          super(true);
       // this(true);
       * Returns the message that will be reported to JSF for each error that occurs.
       * Returning "null" is the way the custom error handler signals that a given exception
       * should not be reported to the client.
      @Override
      public String getDisplayMessage(BindingContext ctx, Exception ex)
        if (ex instanceof oracle.jbo.ValidationException) {
          return super.getDisplayMessage(ctx, ex);
        else {
          // Extract and return the error message that has to be displayed
          Exception exception = ex;
          String message = "";
          // If this exception is an instance of JboException,
          // try to find the cause by recursing over the eventual causing exceptions
          if (exception instanceof JboException)
            Throwable[] exceptionList = ((JboException)exception).getExceptions();
            while (exception instanceof JboException
                    && exceptionList != null && exceptionList.length > 0)
              exception = (Exception)exceptionList[0];
              if (exception instanceof JboException) {
                exceptionList = ((JboException)exception).getExceptions();
          // *** Special processing of SQLExceptions
          if (exception instanceof SQLException) {
            message = exception.getMessage();
            // Ignore the lines in the error message that indicate the line number in the PLSQL code that the error resulted on.
            int ind = message.indexOf("ORA-06512");
            if (ind > 0)
              message = message.substring(0, ind);
          // *** If the the reason for the JboException was data creation exception then display the message
          // of the top JboException (i.e. JBO-*****: Invalid numeric value, date format or time format)
          else if (exception instanceof NumberFormatException || exception instanceof IllegalArgumentException) {
            // Report the top exception
            message = ex.getMessage();
          // Otherwise report the message of the lowest exception in the hierarchy
          else {
            message = exception.getMessage();
          return message;
    }but it is not working for me.
thanks in Advance.

yes i have used dubugger.
i have set break point to following line-
return super.getDisplayMessage(ctx, ex);
if (ex instanceof oracle.jbo.ValidationException) {
        return super.getDisplayMessage(ctx, ex);
}when atttribute validation done like i have attribute of type number and i have done the validation "must be greater than 0" now when i have given negative value control go to above line.
and i have added following code also in handler class
        @Override
           public void reportException(DCBindingContainer dCBindingContainer,
                                       Exception exception) {
System.out.println(exception.getMessage());
                   super.reportException(dCBindingContainer, exception);
               }now when i have done commit operation control go to here and println statement print follwoing error on log window.
JBO-26041: Failed to post data to database during "Rollback to Savepoint": SQL Statement "null".

CWA using customized portal does not work IPAD 2

Hi all,
I have another interesting case that I have been testing for more than a month but it is not working. Cisco provides templates to create the customized portals for LWA or CWA. However, Success Page HTML does not work on LWA and Cisco ISE uses internal default success page.
On my specific case, we need to move from LWA to CWA in order to minimize the number of redirections and the customized portal for login and AUP work fine BUT when the SUCCESS PAGE is presented on the IPAD, the button on the top right corner never changes from CANCEL to DONE even though the Authentication is successful. We modified multiple times the HTML Files following Cisco Templates and the following link (which looks like has an error) with the same incorrect behavior. Only works if I click the go back arrow on the IPAD so I move back to the AUP page (not an acceptable workaround).
Reference Link:
http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-42-Customize_ISE12_Web_Portals.pdf
In the link, Cisco mentions version 1.2.0.899 patch 8 as the version to be used on the ISE devices running the customized templates. However, we recently moved from 1.1.3.124 to 1.2.1.198 patch 3. I created a brand new VM running 1.2.1.198 patch 3, imported the cisco templates for login, AUP, success and error and I am still getting the same problem on IPAD 2 for SUCCESS PAGE even though I am using Cisco Templates.
I could give a try configuring another VM running 1.2.0.899 patch 8 and use the Cisco templates + IPAD 2 but that is not a good solution.
Have anyone experienced the same problem?
thanks

I opened a case with Cisco TAC, let's see what happens. In the meantime, I created a VM ISE which will be running 1.2.0.899 patch 8 so I will upload the Cisco HTML Files on it and see it this option works properly on IPAD 2, IPAD 4, Chromebook, Win 7 and Samsung Tablets.

CE7305 - Transparent mode authentication does not work.

Hi,
Im doing a trial content engine 7305 for my customer. Everything worked well so far with the box except with the authentication feature.
Authentication work well on proxy mode but when I turned it on with transparent mode it does not work. My customer is using LDAP for user authentication.
I suspect there is something that I did not turn on in the configuration.
Attached herewith is the show tech of the Cisco 7305 content engine.
Please advise!
Thanks in advance,
Raymond Hew

Hi Zach,
My customer is using Novell LDAP.
Right at the moment the CE is already working with the auth. after rebooted the CE 7305. Just can't explain why but it works after rebooting.
Thanks for your fast respond.
Best regards,
Raymond Hew

NGS Sponsors authentication does not work in case user has non-English character in his password

Hi,
we are using the NAC Guest Server v 2.0.1 and have Sponsors authentication done through Radius servers. Radius servers are Microsoft IAS using AD.
Sponsors user authentication works okay in case user's password includes English characters, but does not work in case an user uses national characters like for example Umlauts in German.
On Radius server I can see these error messages:
User XXXX was denied access.
Reason = Authentication was not successful because an unknown user name or incorrect password was used.
As soon as an user changes his password and uses English characters only, it resolves.
I guess this might be that NGS uses different coding while sending a password to Radius server, but not sure.
Appreciate if anyone knows a root cause and what could be a workaround. Unfortunately our AD policy allows users to use national characters and we can hardly change it. So a change on NGS or Radius side would be more viable.
Many thanks for your help.

A case has been opened at Cisco and it is now quite clear that it is a problem with coding.
According to Cisco development team NGS uses UTF-8 coding to send the password, of course encrypted, to the Radius server. This cannot be changed within NGS. We use Radius Microsoft IAS Version 5.2.3790.3959 running on VMWare Windows 2003 SP2. More tests are scheduled to be performed.

Oracle 10.1.0.4.2 SQL Plus dbms_output.put_line not working

I am using Oracle 10.1.0.4.2 SQL Plus, and dbms_output.put_line is not working. It returns the dbms_output ONLY from outside the procedure. I have dbms_output INSIDE my procedure, and none of it gets returned. Please help!
Here is what I enter:
set serveroutput on size 1000000;
DECLARE
x number:=0;
begin
DBMS_OUTPUT.ENABLE;
c2reports.c2proc(x,'TEST');
DBMS_OUTPUT.PUT_LINE('testX');
END;
testX
There should be more besides the 'testX' that gets returned. The first line in my procedure has output code to print testY. Thanks in advance!

This is the forum for the Oracle's SQL Developer (Not for general SQL/PLSQL questions). You should ask question like this in the PL/SQL forum

Custom Actions do not work if list is customized with InfoPath?

I am trying to add the display form ribbon custom action, or even the edit form ribbon action, but they do not work if I use a list that was customized in InfoPath?
they work fine on an out of the box list? I am able to do the list item menu actions, but the other ribbon commands are missing?Does InfoPath use a different layout that overwrites these commands?

Hi,
yes your custom actions disappears when you customize with infopath forms.
https://social.technet.microsoft.com/Forums/office/en-US/c6afbc48-90cc-4db0-9808-f181c121c7d1/custom-actions-and-infopath?forum=sharepointcustomizationprevious
https://social.technet.microsoft.com/Forums/office/en-US/2706e5b5-17f3-4d2e-982b-653277c749cd/custom-actions-icons-disappear-when-using-infopath-forms?forum=sharepointcustomizationprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

Custom Navigation bar not working. Apple can't seem to help

After watching many videos on people customizing their Navigation bars on Iweb, I decided to do the same for my website. If you go to the home page of my site I can click on any link and have no problem. However, once I am off of the home page I cannot get any of the other links to work. I took my mac to the apple store and they showed me how to fix it. But it didn't help. Nor has there been any useful advice from calling their tech support. Any ideas on how to fix this would be appreciated.
Rev. Paul

So if you have a custom made nav bar that works okay on the home page, but not on the other pages of your site, did you remember to go and hyperlink your nav bar on the other pages of your site and not just your home page, or did you forget?
That is one reason why they will not work, if you forgot to hyperlink - you either have to hyperlink first and then copy and paste or do each page individually - it is time consuming, but is the price you pay for having a custom nav menu.
A url would be nice so we can see what is going on.

BPM Worklist: Searching in custom views does not work for protected flexfields !

Hello,
Have mapped few protected attributes in my .task file. Also created the corresponding labels on target SOA server. I am able to create custom views using these protected flex fields.
But what I have observed is keyword based search is not working for custom views using protected fiexfields.. however it works fine with public fiexfields.
Any pointers on this? Am I missing something in the configuration?
Thanks..

Can anyone help me?

Customized Help does not work anymore after patch update.

Hi,
Our ECC system have a customized help (SAP Main Menu -> Help -> Company Help). It stoped working after the kernel upgrade. What do you think made it stop working.
I tried to update also the sapgui patch to 21 but still the help would not work.
thanks
kbas

.

Pl/sql Custom Authentication is not working. DADs.conf is fine.

Similar Messages

Maybe you are looking for