Placing order for picture book

When I click "buy book" I get the following message:
"Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
I have checked every page 5x over and there are NO EMPTY FRAMES. I even re-did the entire project just to see if that would solve the problem. iPhoto will not let me proceed with the order without fixing this problem. I'm making this book as a birthday gift to my wife.
Any tips/suggestion/help on how to fix this?
Message was edited by: PropTurnin247

This is what Larry is referring to:
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Similar Messages

I have a iMac with lion 10.7.4. I had to turn on Photo Stream several times in order for pictures to download. Why doesn't Photo Stream stay on?

I have a iMac with Lion 10.7.4. Ive had to turn Photo Stream on several time in order for pictures to download. Should Photo Stream stay on?

That's an all to frequent problem. Try deleting the iPhoto preference file and then reset all of the preferences in iPhoto. That may do the job.
OT

I submitted my trade in and then placed order for iphone 6 - processed payment and everything - no email confirmation was sent and no order history on my acount - did it go through or not???

I submitted my trade in and then placed order for iphone 6 - processed payment and everything - no email confirmation was sent and no order history on my account - did it go through or not???

Seeyasoon,
I know this is something that I would be worrying about too, and I want to ease your mind. I've sent you a direct message and look forward to assisting you there.
SarahO_VZW
Follow us on Twitter @VZWSupport

I've had to turn on iPhoto on my iMac in order for pictures to transfer. Why does'nt iPhoto stay on?

I've had to turn on iPhoto several times on my iMac in order for my pictures to transfer. Why does'nt it stay on? Is ther something I can do to keep it on?

What version of iPhoto? Of the OS? How are you trasnsferring? Is it crashing?

Placed order for BT Sport on 14th June, still wait...

received an e-mail on 16th August saying that BT are now moving on to fulfilling orders placed after 1st August - phoned 150 but they said they couldn't see my order, even though I have e-mail confirmation of it - they suggested I call teh resofficail line which says if I don't have an order number (I wasn't given one), then I need to call 150 - can anybody help???????

I did eventually receive the youview box but, guess what, the engineer visit was booked for between 1 and 6pm today and it's now past 6pm and nobody has turned up.
Not only have I been waiting in all afternoon, but I have also moved all of the furniture away from the walls to allow him to install the cable and so the house is in a dreadful state.
I phoned 150 at 4.15pm to ask for an ETA and was told that the engineer could not be contacted. However, I specifically asked for confirmation that my visit was on his list and so he would be here before 6pm and this was confirmed back to me.
It is now 6.15pm and I have phoned 150 again. They cannot give me a good reason why the engineer has not come as arranged and can only offer to cancel the order yet again and re-book the visit. They also cannot explain why I was lied to earlier in the afternoon.
I realise that this may seem a trivial matter, but having been constantly messed around for 3 months and now lied to about the non-existent engineer visit has reduced me to tears. I am so angry and frustrated.
Is this the worst customer service ever? It is certainly the worst that I have ever encountered.

Verizon placed order for a service w/o my permission and now can't cancel it.

Called VZ because I get the message that the screen "We're sorry, we are unable to continue your order at this time. Please try again later or contact your local Verizon office for assistance. Please" when I attempt to get any information on my services.
I was passed from one person to the next without a resolution and then an hour later I received an email from VZ thanking me for ordering Verizon Internet Security Suite for $16.99 per month.
I called VZ again and was tossed around to VZ customer service, then wash bumped to the "elite team" and no one can cancel this service that I did not order.
I was told that the order was made by the rep that I spoke with at 9:33 p.m. this evening. She should be reprimanded. This is outrageous.
I called VZ this evening because I couldn't even view detailed information on my services let alone order Quantum without getting the error message that I referenced above, and then a VZ rep saddles me with even more charges on a product I never requested. Now it can't be cancelled?!
What is going on with this company? Why can't this be resolved?

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Jpeg preview for picture books or master/versions

When creating a book does Aperture use the previews as other Apple applications use or are the actual master/version "files" with the modifications used? If it is the previews I will need to regenerate the previews in a higher quality.
thanks

Aperture uses the masters and creates whatever versions you have selected. When the book is generated it redoes it all at full resolution. Previews are not involved.

We would like to create a picture book with text, pictures and music. What can we use, is there a template?.

We would like to create a picture book with text, music and pictures. Is there a template for this or an app. What are people using for picture books?

Have you looked at iBooks Author?
http://www.apple.com/ibooks-author/
It has its own forum at
https://discussions.apple.com/community/books/ibooks_author

Low budget image proofing for iPhoto book order

Hello!
I want to prepare my photos the best I can for iPhoto book ordering (Christmas present for family).
I have a Dell U2711 attached to a Mac Mini running OS X 10.6.8 and iPhoto '11 9.2.1. and a Canon Selphy CP520 dye sub printer which I thought to use as a precheck of what my JPG sRGB images would look like when printed in a book.
Here's my headache:
If I set up the monitor and calibrate the display profile as suggested in post #1 under this thread then such setup makes me color correct the photos by RADICALLY pushing the midtone slider in the levels adjustments to the left (brightening the picture). Prints that come out of the Selphy under this setup are a perfect match to what I see on the monitor and that is wonderful. However, I hesitate to order a book using such images because they appear far too bright on an iMac for example. (Perhaps I should mention that Google logo in Safari looks like its on steroids in this setup).
On the other hand, if I set up the monitor as it came from factory (PC gamma, standard preset), and use the default DELL U2711 display profile in SystemPreferences, then pictures look relatively ok on screen without any radical color correction. But prints that come out of Selphy with this setup don't match what is on the display, prints are too dark, and again I hesitate to order a book with such images.
Any suggestions?
Thanks.
Mato

Yes - don't try so hard and use your Mac and iPhoto - not a PC
iPhoto is designed as a consumre level program for point and shoot comeras - many people (including me) report excellent results using it that way - load sRGB photos form a digital camera and do minimal processing on them - never do major color adjustments - using iPhoto - preview rthe book -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
and order
Apples comments on this are here
Of the negative comments posted here nearly all of them were from people who spend lots of time and energy adjusting photos trying to second guess the printing process and failing to do so - Apple does have an unconditional sastisfaction guarentee - do it the simple way - less is more in this case
LN

Picture Book theme - why has my book printed with text box outlines showing? and how do I change this for any future purchases? This did not occur with previous books.

Why have borders appeared around the text boxes in the Picture Book theme and how do I change them for the future. My latest book looks dreadful!

Have you checked, if your book is really set to the "Photos" Theme? This looks like you may have used one of the "Travel" themes. These themes create borders around the text boxes. When you select a theme, the book title will say "Photos", even if the theme is a different one.
For example, frames text boxes with the "travel" theme.
Have you previewed your book, before printing it? Did the framed boxes already show in the preview?
See: Previewing an order in iPhoto or Aperture
Regards
Léonie

Sorting pictures in numerical order for slideshow using Iphoto 7.1.3

I have scanned hundreds of old slides and assigned titles with an ascending numerical code which I hoped Iphoto would then sort numerically in a slide show.
This is not happening!
When I sort by title (the numerical code) Iphoto seems to place them in some binary
sequence e.g. 1,10,100,101,102 etc. I want them 1,2,3,4,5,etc.
Help! What am I doing wrong? How can I get them in proper numerical sequence without manually moving them around on the screen?
When I view the files in their folder as a list they all show in proper numerical sequence. Why will Iphoto not sort them the same way?

Welcome to the Apple Discussions. At Terence pointed out the alphanumerical listing in iPhoto requires a zero to be added before numbers 1 thru 9 (for less than 99 photos) in order for the numbers to be in the natural order. Renaming as Terence suggested, Photos->Batch Change->Title to Text with sequential numbers added will pad zeros accordingly so you'll get -01, -02, etc., or if more than 100 files, -001, -002, -020, etc.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

I am ready to order my iphoto picture book, but I want to change the binding from wirebound to hardcover. Does anyone know how I can do that without losing my already assembled photo pages?

I am ready to order my iphoto picture book, but I want to change the binding from wirebound to hardcover. Does anyone know how I can do that without losing my already-assembled photo pages?

Yes - select the book and duplicate it (Command - D) in case of problems - open it and click change theme and select the theme and the new style of binding
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
then order after you have carefully checked the preview
LN

I downloaded ibooks on my ipad. Application was free but it had books in the library. They started downloading and I didn't purchase them or order them. Now I have received charges for 4 books that I didn't want to purchase. How can I get a refund?

I downloaded the ibooks application on my ipad 2. It showed books in the library. It downloaded and charged me for 4 books I didn't order. How do I get a refund? Is there a phone number to call? And why did this happen?

Contact iTunes Store Customer Service.
tt2

Can I use an iTunes gift card to order a photo book from iPhoto for iOS?

Can I use an iTunes gift card to order a photo book from iPhoto for iOS?

no - credit card or debit card only unless they have recently changed their policy
LN

How to set product Id for event booking order?

We take paid bookings for a number of events through the year. Since the event booking information is identical for every event (only the event details change), we have implemented this by embedding the HTML from a standardised web form into each event's details section.
However, when the event booking is submitted by the customer, Business Catalyst creates a product whose name is constructed as {form name}/{event name} to correspond to this event. This product is referenced in the CRM order for this event that is linked to the customer. This means we get a separate product for each event type.
The problem is that the product code that is assigned to the event booking product is the ID of the web form that was used to process the event (ie. the form embedded in the event detail). Since we use the same web form for multiple events we are now seeing duplicate product codes.
I would like to create a common product for all event bookings and pass this product ID when posting the form on submit of the event booking. The reason for a single booking product is to simplify the synchronisation to our accounting system - otherwise we need to create a new product in the accounting system every time we add a new event.
Is there a query parameter I can include on the form's action URL or as an input field to the form that controls the product ID and / or the product name that will be used for the booking order?
The only other solution I can think of to solve this challenge is to create a unique web form - event combination for every single event. This is not a great solution due to the unnecessary duplication that this will involve - I would rather re-use a common piece of code.
Thanks for any help and advice.

Hello
If I'm not mistaken, the 'text range' in PowerPoint does not have 'language id' property whereas the 'text range' in Word does.
Check the terminology dictionary of PowerPoint.
cf.
http://www.microsoft.com/mac/developers/default.mspx
Sorry for the bad news...
H

Placing order for picture book

Similar Messages

Maybe you are looking for