Planned Activity column in overview screen of KP26 is disabled

Hi,
I am getting Planned Activity column disabled in the overview screen of KP26. So, unable to enter plan data.
Please help.
Thanks
Manish

Hi Manish,
Please check the Activity Type Category. Probably It would be 2.
If it is 2 then change the same to 1 and try KP26.  The other categories are as follows:
1     Manual entry, manual allocation
2     Indirect determination, indirect allocation
3     Manual entry, indirect allocation
4     Manual entry, no allocation
Bye
Robin

Similar Messages

  • Custom column in overview screen of a standard infotype

    Hi all,
    I have some custom field in a standard IT.
    In the screen 2000 I haven't any problem.
    But I need they also in screen 3000 (the overview one).
    There is a "standard" way for modifing this screen without making a modification?
    Thanks,
    enzo

    Sorry <b>Enzo</b> -:( My mistake...
    In <b>PM01</b>, you can either modify or append new fields to a Infotype Dynpro.
    Just pass the Infotype Number, into the 3rd tab...And you're going to get the PE51 window, where you can make the adjustments -:) I have never used it myself...But I have seen it in action -;)
    Greetings,
    Blag.

  • Column change overview screen of infotype 1001?

    Hello,
    I run transaction pp01 and choose an object (whatever type, let say S-position). For a particular object, I choose  Relationshpis infotype (IT 1001) and choose overview icon. I see some columns of a displayed table.
    I would like to replace Abbrevaiation column to Name column. So, instead of a position abbreviation I want to see a full name of the position.
    Can someone tell me how to make it?
    Regards
    Rafal

    Hi,
    Can anyone answer my question?
    Pliiiiizzzz

  • Planned Activity and Actual Activity Fields & relevenat table

    Hello,
        Can any one pls let me know the field and Table names for the following two fields (need for preperation of a report):
    PLANNED ACTIVITY: -  Production Order confirmation Planned Activity column
    ACTUAL ACTIVITY: -   Production Order confirmation Actaul Activity column
    thanks & regards
    Chaitanya Rayaprolu

    Hi,
    Procedure :
    go to the feild(Cursor in feild) press"F1" for help ( Pop up will appear )
    click on "technical help"( Icon with cross planting of hammers)
    from the small popup u can get Feild name and table or Struc.
    copy the feild name.
    go to Transaction "se16"(Tables) enter "DD03L" ( data base table ) and press enter.
    enter the feild name ( Copied earlier ) in feild name block and execute(F8) the table.
    You will see all the tables and structures containing the particular feild.
    This is the best solution to be self sufficient.
    please close the thread after testing the solution...and appreciate your reward.
    Prakash

  • Adding a new column to item overview screen 4900 in sales order transaction

    Hi All,
    I want to add a new column to refer to a custom field in screen 4900 ( Item overview screen ) in sales order transaction. Please suggest appropriate exit or BADI for the same. Give all steps to do the same.
    Thanks in adavance.
    Jawahar.

    Hi
    As the link that RamKi let us know, this is a modification, so, I suggest to avoid. See SAP Note 862228 - Order reason for returns on item level for further information. I suggest to use the other enhancements in tabs.
    Regards
    Eduardo

  • How to add column in the item overview screen (4900) in sales order?

    Hello Experts,
    I have a requirement to add a column (Field - Size/Dimensions - MARA-GROES) in the Item Overview Screen (4900).
    Is there any provision for that? Any enhancement or screen exit or so?
    Quick response will be appriciated.
    Thanks in advance.
    regards,
    hp

    Hi
    As the link that RamKi let us know, this is a modification, so, I suggest to avoid. See SAP Note 862228 - Order reason for returns on item level for further information. I suggest to use the other enhancements in tabs.
    Regards
    Eduardo

  • PO Screen Layout change, Addition of one column in Item Overview screen!

    Hi All,
    I have one typical requirement where in user wants to add one column in the Item overview screen, example "Reason for ordering" which is there in Item Detail under Retail Tab!
    Can anyone suggest, How can i get this done? and also i want to know if  there is any possibility to add this field at header level??
    please let me know if i'm not clear in describing the issue...
    Suggestion and solutions would be rewarded & appreciated,
    Thanks in Advance..
    Regards,
    Siddaram

    hi,
    Check sap note 458591..
    Regards
    Priyanka.P

  • How to change columns in PO overview screen

    In standard SAP in PO Overview screen the first column will be Status and second will be Item, however in our system it is changed and the first column is short text and second is qty and then followed by status column.
    How can i interchange it back to normal.

    Just Select The Total Column, then Drag & Drop accordingly..
    whereever you want..
    Alternatively you can do by
    in the top right corner of the item overview you have a button for table control (above the vertical scroll bar).
    If you click that button, you get a pop-up from where you can customize the layout.
    Press the blue info button there and read how this is to be done.

  • Adding a tab on to Activity Overview Screen in CJ20N

    Hi Experts,
    I have to add a new tab may be called as ' PRICING' on activity overview screen right next to Purch. TAB
    Basically, when we select an activity in CJ20N and click on material component, where we actually put in the material number, requirment quantity, item category , there we have two TABs ( TOTAL and PURCH.) .
    Next to purchase I need to add a new tab , which will pick up the price of material from sales order line item automatically.
    Please suggest me, how to achieve this.
    Thanks,
    DHRUV

    have patience mate, usually weekends just fly by . . . .
    anyway you cannot add another tab there - there is an exit CNEX0009 but I am not sure if you can add tabs
    if you want the sales order value from procong tables then I suggest thet you use CNEX0008 to add a field on the activity and then use CNEX0009 to check etc . . .
    hope that helps

  • How to  active  column in Component overview  "RESBD-POTX1 "

    Hi , Expert ,
      Anyone know how to open field RESBD-POTX1 in Component overview  screen  ?
    can i define field selection for component ?

    Hi Titus,
    This field normally appears in the description ( which is nxt to component) check the same text line item description will appear in RESBD-MATXT.
    Check and let us know is the same text your expecting in RESBD-POTX1
    Thanks & regards,
    Satish

  • Custom Infotype - Overview Screen ( Screen 30000

    Hi All,
    I have developed a custom infotype. Need some inputs regarding the overview/List screen Please !
    the overview screen primarily is used to list the records for date ranges.i.e. every line / row will have a unique date range for which the record is valid.
    But is there a way in which we can get multiple rows for a date range in List Screen ??
    example.. If screen 2000(create/display screen) has 3 rows( Listed below) for a date range Date1 to Date2.
    (these records below are in the table control).
    Row 1. Name1 Age1 Dob1
    Row 2. Name2 Age2 Dob2
    Row 3. Name3 Age3 Dob3 ... and so on..
    Now the List Screen / Overview screen 3000 - This is how its needed to be seen...
    Row1 Date1 Date2 Name1 Age1 Dob1
    Row2 Date1 Date2 Name2 Age2 Dob2
    Row3 Date1 Date2 Name3 Age3 Dob3
    Instead of (This is what comes up on Screen 3000 now)
    Date1 Date2 Name1 Age1 Dob1 Name2 Age2 Dob2 Name3 Age3 Dob3
    ( The Screen Layout has been modified to add columns to accomodate Name2 Age2 ..... etc)
    Any suggestions/inputs will be highly appreciated !
    Regards,
    Mark

    HI
    I tried hiding it with the help of code.
    Still not able to achieve the result.
    THe below is the code what I am using.
    Please check it and suggest me.
    if psyst-ioper EQ 'LIS0' or
        psyst-ioper EQ 'LIS1' or
        psyst-ioper EQ 'LIS9' .
         loop at SCREEN.
      if screen-name EQ '*P9009-ZWCADM' or screen-name = 'P9009-ZWCADM'.
        screen-active = 0.
        endif.
        MODIFY SCREEN.
      endloop.
      endif.
    Still able to see the fields on the screen.Not being hidden.

  • Line item net price not updated in overview screen net price&line item

    Hi ,
    We have down payment order with 10 line items
    In orders with billing plan, the sales line item net price, if we entered manual condition price (ZPNP) ,gets updated in item condition net value. But it does not simultaneously gets updated at once in 1) Sales order overview screen net value 2) Billing plan header 3)Sales order overview screen line item condition  net value. Updation at these three places happens only after clicked on header conditions.
    However, in case of the last item in the sales order, the updation happens simultaneously in all the 3 places i.e. 1)    item condition net value. 2) Sales order overview screen net value 3) Billing plan header 4) Sales order overview screen line item condition net value.
    This is also true for the order with only single line item. We are faced a information popup message every time we change the item net price u201CItem 000100(100 is last line item number in sales order) exists already; the entry ignored u201C. This happens in case of all line items except the last line item. Also this does not happen in case where there is a single line item in order.
    Our requirement: The moment the net price of an item is change manually, it should get updated at all the 4 places mentioned above like it does in case of the last line item.
    Kindly help me to fix this problem.
    Regards,
    Adikesav

    Hi,
    Can u elaborate ur query ?
    By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
    Regards,
    MAdhukar Shetty

  • Adding institution in overview screen of infotype 22

    Hi,
    I want to add new column to the overview screen(3000).
    The column is institution which is standard field from pa0022.
    The field is not listed in t588m table also.
    I also tried adding field using pm01 list screen tab.But this also doesnt help
    Is there anyway to add this?
    Any help is appreciated.
    Thanks
    Ambily
    Edited by: Ambily R on Sep 7, 2010 5:19 PM

    No entries can be added in t588m as told by the functional person here.
    Please let me know if there are any other options.
    Thanks
    Ambily

  • Delete entries from custom infotype overview screen

    Hi
    I have the requirement to delete few fields from overview screen(Screen 3000) from my custom infotype.
    Can I go to screen 3000, and CUT (delete) the fields which are not required? or any other procedure?
    Did anyone get similar requirement?
    Please help me in this regard.
    Thanks in advance.

    HI
    I tried hiding it with the help of code.
    Still not able to achieve the result.
    THe below is the code what I am using.
    Please check it and suggest me.
    if psyst-ioper EQ 'LIS0' or
        psyst-ioper EQ 'LIS1' or
        psyst-ioper EQ 'LIS9' .
         loop at SCREEN.
      if screen-name EQ '*P9009-ZWCADM' or screen-name = 'P9009-ZWCADM'.
        screen-active = 0.
        endif.
        MODIFY SCREEN.
      endloop.
      endif.
    Still able to see the fields on the screen.Not being hidden.

  • UWL/Universal Worklist/Substitution - Removing the "Rule Activation" column

    Hi SDNers,
    From the Universal Worklist, it is possible to access the "Manage Substitution Rules" screen, in which one can manager substitutions over its colleagues.
    I would like to remove a column in the standard "My Substitution Rules" table : the "Rule Activation" column.
    Is there a way to do it ?
    Regards

    Michael, you can do this in the UWL but only with a 6.40 backend (ex. ECC 5) with a specific patch level (can not remember that patch level).
    Before this you need to set these substituion in the R/3 inbox.
    This being said it is only for workflow task routing. If I read your message correctly you want a manager to assign his authorizations (roles in R/3 or the portal) to a secretary. This is not supported in any standard SAP (or portal) scenario as far as I am aware.
    Cheers,
    D.

Maybe you are looking for