Planning applications are not diplayed in the planning web

Hi
i have installed all products of hyperion 11.1.1.3 and my problem is iam able see the planning applications in workspace,but when i access the planning application through web i got the error like
No applications are available. please suggest me how to get applications through web.
Thanks
Ravi
Edited by: user6639 on Oct 7, 2009 11:33 AM

Hi,
Try below steps:
1. Open Planning application in workspace
2. Click "Administration" menu and click "Manage Properties".
3. Click "System Properties" tab and find "CREATOR_URL" property.
4. Copy and paste the vlaue URL of this property in a web browser and see if you still don't see the applications in a drop down
Let me know if it helps.
Cheers
RS

Similar Messages

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Variables from workbook are not visible in the Planning function

Hi,
We're using a workbook with a bunch of queries in it. Every query has a lot of variables declared that are calculated based on two input ready variable that users are required to fill the first time.
Everything works as expected until the save data function is called, which in turn calls the planning function.
Here, the user exit variable try to be recalculated again. Unfortunately, this planning function loses track of the two input ready variables that were on the workbook, so the user exit variables have no values.
Can you please suggest a method so that:
a) The user exit processing in the planning function "sees" the two input ready variables
b) The user exit processing is not triggered in the planning function and it's taking the already calculated values
Let me know if you require further information.
Best regards,
George

Hi,
the variables in the filter of the query lives in one variable container and the variables of the filter of the planning sequence live in another variable container. They do not know each other. You need to establish a relationship between them. Usually this is done via variable binding for regular variables. For exit variables the variable binding can be done as written above.
If as in your case you have variables in the filter of the query and you want to use their values in the variable of the planning sequence than you need to store the values somewhere where you can retrieve them in the exit. This can be in a e.g. in shared memory or in the session memory. To do this you need to spend an extra exit variable in the filter of the query. The exit variable reads the real values and stores it somewhere (e.g. shared memory, global parameter of a function group, a class member or something similar). Now as the variable value is stored it can be read in the implemenation of the exit variable in the filter of the planning sequence.
In total we have 3 variables:
Variable 1 contains the value which the user keys in and exists in the filter of the query.
Variable 2 reads variable 1 and stores the value. It needs to be defined in the filter of the query as well.
Variable 3 reads the stored value and needs to be defined in the filter of the planning sequence.
Regards Matthias Nutt
SAP Consulting Switzerland

MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer.

RDS 2012 App-V 5 SP2, Applications are not pinned in the Metro Start Menu

Hey All,
I've been building a new App-V 5 Environment using server 2012 R2 for the App-V management\Publishing\Reporting servers.
I've installed app-v 5 SP2 on the RDS 2012 R2 servers and installed the App-V 5.1 SP1 Hotfix (KB2897087) for the 2012 R2 support.
I have run into the following issue; When triggering a app-v publishing sync the applications are only added in the classic start menu. The applications aren't pinned in the Metro Start menu like our App-V sp1 RDS 2012 clients.
I have checked the App-V client eventlogs (including the debug logs) and I haven't been able to find any errors that point out the cause of my issue.
Has anyone experienced the same issue or has anyone got any tips to get the app-v 5 sp2 client on RDS 2012 R2 to pin the sequences to the Metro Start Menu?
Thanks.

This is the default behaviour of Windows 8.1 and Windows Server 2012 R2 - there are no programmatic ways to pin shortcuts to the Start screen.
Here's a way to customise the Start screen layout: http://stealthpuppy.com/customizing-the-windows-8-1-start-screen-dont-follow-microsofts-guidance/
Here's how to go it with Group Policy: http://www.grouppolicy.biz/2013/06/customising-windows-8-1-start-screen-layout-with-group-policy/
Note that neither approach will help you pin shortcuts to the Start screen for users that have already logged on, without overwriting their existing preferences.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Why it is popular applications are not included in the official repo?

Why it is very popular applications like yaourt (GPL), pacman-color (GPL) and many other free programs are not included in the official repositories?
Why not create an official "non-free" repository for popular non-free software?

There will never be an AUR helper in the official repositories because it runs counter to the AUR policy - which is: it's unsupported, so we're not facilitating its use. You need to be aware about the potential drawbacks of its usage, which involves getting you, the user, to make that call to install an AUR helper - which involves more than just calling pacman. Can't comment on pacman-colour, but apart from colour, it doesn't really add any functionality afaik .

NB Type Planned orders are not Displayed in the Order Information System

Dear All
We have one material with Proc. type F.
We have entered a sales order for that item & run MRP ( MRP type PE)
No strategy is assigned to the material.
MRP has created a Plan Order which is of NB type & in MD04 it is showing SDEB against Plan Order.
Now we are not able to see this Plan Order in COOIS.
Although it is visible in MD04,MD16.
Can anyone tell me whether COOIS consider only those plan orders which are of E ( In house Prod ) category ?
How can we display that in COOIS ?
Abhishek Garg

Dear,
COOIS is used for production orders or planned orders olny and it will show u Order information relevent to "E" type procurement.
You can use ME5A

Maintenance Plan - Tasks are not executing in the order they were created

I've created a new maintenance plan to perform differential backups but the tasks I created don't necessarily seem to execute in order all the time. These are the tasks and order assigned when I created the plan using the Maintenance Plan Wizard:
Back Up Database (Differential)
Clean Up History
Maintenance Clean Up Task
Here's the deal...When it executes in the order they were created (above), all my old backups are deleted successfully. However, there have been instances where, for example, the Maintenance Clean Up task executes before the
Clean up History task. When this happens, only one of my backup files is deleted successfully but not the second (I have two .bak files needing to be removed). Furthermore, I noticed that the backup that wasn't deleted when it should
have gets deleted at the next increment when new backups are created.
Again, this does not happen when the tasks run in the sequence shown above. Only one old backup gets deleted (instead of two) when one of the above item is out of sequence. Strange behavior to say the least.
Any feedback on this will be appreciated!

If you do not set up precedence constraints it runs all tasks at the same time.
Please see "8. To define a workflow between tasks:"
http://msdn.microsoft.com/en-us/library/hh710041.aspx

When entering the digits from an Anti Spam Image they are not accepted by the host web site why

In e-bay when required to enter the digits from an anti spam image, ebay rejects the entered digets.
This only occurs when using Firefox, Internet explorer works fine.
Any body know why?

hi john, you probably have to go trough your list of addons once (in the firefox ''menu ≡ > addons > extensions'') and disable them one by one to find out which in particular might be causing the problem.

Days supply is not populating in the planning book

Hi Experts,
When I select multiple products in the planning book, the value is papulating as total but if I drilled down to individual product then days supply(Key figure) values are not populating in the planning book.
Please let me know if any idea.
Regards,
Hrishi

From what you mention it looks like you do not use the standard SNP Planning Book. Was the macro inactive so that you had to regenerate?
When you move a macro from workbench to level change it should not require to be regerated.
Please check if following macros are active (green) under level change in sequence
Determine Workdays
Layout Attributes
Drill (Level)
Else compare the macros and sequence in the standard SNP Planning Book with the Planning Book you are using.
The Day's Supply (All: Day's Supply) and Determine workdays macros are essential for populating the day's supply keyfigure.
Thanks,
Somnath

KP06 Plan Values are not updating in Cost center report

Hi,
I have configured KP06 and uploaded through excel,It is getting uploaded successfully.
But after uploading planned values are not updating in the S_ ALR_87013611 Report.
What could be the reason.kindly give me some inputs regarding this.
Thanks
Supriya

Hi Supriya,
After uploading the entries have you saved or have you verified with excel values.
Please check.
Sateesh

ODI to delete those members which are not present in the source file

Hi John,
Using ODI we can delete members by using delete option in the Operation column
Fine. I would like to delete members from planning which are not there in the source file.
For e.g if my source file has members A1,A2,A3,and A4 and Planning outline has A1,A2,A3,A4,A5 and A6. I would like to delete only A5 and A6.

Hi John,
Its only a one time process. The issue is, we have to concatenate two segments of the COA into one dimension in Planning. But if we concatenate it creates a cartesian product which is not the requirement. Only a particula value of segment 1 are to be joined with segment 2.
E.g Company 1 is to be joined with Cost center 1.
Company 2 with Cost center 2
Company 1 should not get joined with Cost Center 2 and Company 2 with Cost Center1.
So when we use ERPI and load the first outline it creates all the possibilities of the concatenation. So we would like to delete the unrequired members. If we have the values of the required members in a file, I would like to delete the unrequired members in the planning hierarchy.
So would like to use the NOT IN function

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

List of planning applications does not appear

Hello,
in EAS i create New Rule -> in Rule Editor displays in right pane -> i click on Select outline -> The Select Database Outline dialog box displays -> when i click on +planning -> nothing is displayed: the list of my planning applications does not appear !!
is this normal?
N.B : i use hyperion planning V11.1.1.3
cheers,

Did you log into the planning application first before logging into EAS, if the planning application service was recently restarted and there have been no logins to the applications then they won't appear.
As a test log out of EAS, log into one of the planning applications, log into EAS
Also be sure that the planning applications have been created to use Business Rules and not Calculation Manager if you want to use EAS.
If you are still having issues then it may be worth having a read of the following document on Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Planning applications are not diplayed in the planning web

Similar Messages

Maybe you are looking for