Planning book over internet

can any one explain the concept or steps for making each planning book accessable to customer over internet.

Check out
http://help.sap.com/saphelp_scm41/helpdata/en/2e/2c8e39b7b3972ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/2e/2c8e39b7b3972ce10000000a114084/frameset.htm
You would want to do collaborative planning in situations where the partner needs to be given limited access to planning data or even inside an organization where not everyone has access to SAP system through SAP GUI. Internet becomes the GUI to manage data.

Similar Messages

Security issue after publishing planning book on internet.

Hello experts,
I have published Planning Book of SCM4.1 on internet via integrated ITS.
Now the users can access /SAPAPO/SDP94 i:e planning book via internet.
All the services related to it have been activated in SICF and obejects related to it are published via SE80 like CLPSDP, CLPGLOBAL etc.
Now when a user who does not have authorization for that transaction logins via internet the explorer screen shows the authorization failure below but at the same time also gives SAP EASY ACESS button on the page. On clicking on the icon the users login into the SAP as per the roles assigned to him.
And he can access the system in the same way via internet as we do via SAPGUI.
I dont want to give this access.
Moreover this happens only when authorization for transaction SDP94 fails. If user has authorization he directly sees the planning book and does not gets this button.
Is there any extra service started in SICF which is giving the access even after user is not authorized???
I have checked almost all the services in SICF and tried deactiavting them But no positive results.
Is there any user parameter for the same.??
Kinldy help ???
System information:- SAP release 640 SCM4.1 server.
Best Regards,
Yatindra

This URL should answer your question
http://www.cisco.com/en/US/tech/tk86/tk89/technologies_tech_note09186a00800b123c.shtml

Error while accessing DP Planning Book through Portal. ( internet)

Dear SDN,
We are using a collaborative planning book from SCM 4.0 system, which is published as a service on the ITS (6.20 version). This ITS has been published so that we can access the system from the Broadband, simply like any other website.
The ITS URL is :
http://mmscmoptprd.mahindradms.com/scripts/wgate/webgui/!
The planning book service is
http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!
When we try through our LAN, we can access it.
When entering through broadband, we can see the first page of planning book , i.e. where selection of planning book and planning view is to be made.
Once a selection is made from the dropdown, and when "CHOOSE" button is clicked (for that matter the rectangular box containing the selection criteria and also the Exit button ) we get a message as :
Problems with this Web page might prevent it from being displayed properly or functioning properly.
Line : 714
Char : 1
Error : Object Expected
Code : 0
URL : http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!?client=100&language=en&accessibility=0&DesignBaseUrl=%3A%2f%2fmdwds01.mahindradms.com%3A80%2firj%2fportalapps%2Fcom.sap.portal.design.portaldesigndata%2Fthemes%2Fits&~design=mm_dms_defaultTheme
and it remains on the same page.
The IView used is of the type :
1. URL IView ... CLPSDP service url is given as parameter URL.
2. IAC IView : web-service is "clpsdp" and "ITS url" is given.
We intend to give either one which should work fine.
I am not able to figure out as due to what reason should this problem arise, either the UI attributes or the publishing or something else.
Request you to please help.
Regards,
chandani
ep consultant
www.bcone.com

Hello,
SInce this is an Portal Error, for quick and efficient replies past it in SAP EP forum.
Thank and regards,
Abhishek

How to control and display video from IP camera using ActiveX control over Internet.

Hello,
I need to control my IP cameras over the internet. I need to log into the cameras and then display the video. There's an ActiveX control registered on the computer and works fine with IE to access and control the cameras. Controlling the cameras using IE works fairly well, but there are some quirks that I'd like to eliminate by using my own custom code.
Has anyone created a vi that controls a Foscam FI8905W over the Internet? I’ve attempted, but I keep getting a catastrophic failure when I try to call ManagementConnect Method in the DVM_IPCam2 ActiveX Control Module V1.0. I'm not sure whether I need to establish an IP connection with the cameras first, or allow the ActiveX control to establish it for me.
Some example code would be greatly appreciated. Running LabVIEW 2011 on a Win7 32bit. Even some code used to control a similar device using ActiveX over Internet would be helpful.

I have an example vi for interfacing to the foscam activex.
I plan on using mouse click events within the activex window to trigger the PT function.
I only have the basic up/down/right/left directions and not the down-right/down-left/up-right/up-left in the enum. You can load the camera's web page and view the source to see the Java script code that uses the activex control. There are definitions for the other directions.
I had to mark the control as "Disabled" to keep click events from going to the activex control. If I double click the control, it goes full screen. If I then click on it to get out of full screen mode the video never returns or returns to the wrong spot in the VI.
Attachments:
Foscam Demo.vi ‏24 KB

[ZT] Important points of creating planning book

From one SAP site:
Some hints on the design and usage of macros for background processing:
u2022 Create a separate planning book for each macro background job. The planning book should
contain only key figures used by the macro itself, and only macros executed as activities by
the mass-processing job. Use a different planning book whenever different key figures are
needed by two macros, and a different data view whenever the time periods are different.
u2022 Remove all unused macros from planning books associated with mass processing jobs, as
they are loaded in an unorganized manner which can be performance-intensive. Unused
macros are not helpful to your business process.
u2022 Only those macros that are called by an activity are executed in background. These activities
are: Start, End, Level change. Default macros are not executed automatically, as they are in
dialog. When defining a job, you must therefore first establish which start and default macros
have to be executed and in which sequence, so that your own self-defined macro can work
correctly. Macros for background should not involve actions like setting colors, hiding fields,
display icons, or sending popup windows that are frequently included in default macros for
online use.
u2022 The planning book used for background macros should have only the functionality it uses, i.e.
application demand planning and no other functionality.
u2022 For performance reasons, run macros for a delta period rather than the entire horizon
wherever possible. Under most circumstances, historical data is not changed, other than
adding new periods, one time bucket profile at a time. Rather than performing the full
calculation over a long historical period, run a macro to do this once, and then design a new
macro that only performs the calculation for the u201Cdeltau201D period, or the period that has just
entered the historical horizon.
u2022 If you want to speed up the processing in the APO releases 3.0A, 3.10 and SCM 4.0, you can
create several background jobs with roughly equal numbers of characteristic combinations
and run them in parallel. Make sure that no individual characteristic combination belongs to
more than one selection variant, as this can cause lock issues. For optimum performance the
selections for parallel processing should be roughly of the same size.
u2022 From release mySAP SCM 4.1 you can use parallel processing profiles for running macros,
e.g. for the adjustment of historical data. You can navigate from transaction /SAPAPO/MC8E
directly to the maintenance of parallel processing profiles or start transaction
/SAPAPO/SDP_PAR for direct access. After defining block size and number of maximum
parallel processes you have to assign the parallel processing profile to the selection variant.
The next time you run this selection as background job it will automatically run with parallel
processing.
u2022 If you need to run two macros on the same key figures with the same level of aggregation, put
both into one planning book and execute them as two actions within the same background
activity (defined with transaction /SAPAPO/MC8T, see below). You thus save the time needed
for loading the data for a second time.

This explanation sounds very good. I think this is a very first things that we face while implementing.
Thanks for posting this.
My

Show Sales orders, STOs, & Deliveires in SNP planning book by Shipping Poin

We are using ECC 6.0 and SCM 7.0.
We have a requirement to model the Shipping point as a location in SNP. By this functionality we want to show Sales orders, STOs, & Deliveires in SNP planning book by Shipping Point in addition to Delivering Plant which is default now.
When I create Sales Orders in ECC system always perform shipping point determination and passon to APO per schedule line via CIF. These Sales Orders always show up in SNP under delivering plant/location. We also want to show them under Shipping Point location.
Here is what I have done so far:
1. I have created a CIF integration model for all required shipping points and CIFed over to APO. These locations are showing up in SNP planning book.
2. I have created Sales Orders and verified the shipping points are determined correctly and sent Sales Orders to APO successfully.
3. I see all the Sales Orders in SNP planning book at delivering plant/location.
4. But I don't see any sales orders under shipping point. They also don't show in RRP3 screen.
5. If I create a forecast in RRP3 at Shipping Point location they show-up in SNP planning book at Shipping point location.
Any idea how to model shipping points in SNP for planning?

check what the ATP order type is of these orders are (from RRP3)
then check what ATP group these order types are assigned to (from SPRO)
then in the SNP Planning are make sure the Keyfigure you want to see them in refers to the ATP group from above
Which planning book are you using? Is it a standard book/ copy of a standard book? What KF are you expecting to see it under... the standard book has KF for planned production that will be same as your PPDS planned orders

Stock not in SNP Planning Book

Hi
We are doing a global implementation and we have seen the issue where stock exists in live cache, and is correctly considered in SNP Heuristics, but the stock on hand is not displayed in the SNP planning book.
This is NOT an issue with the stock category, as the same stock category is displayed for Poland and the UK locations.
This is leading me to think this might be a time zone issue?
What possible reasons can people think of where stock of the CC category is in live cache but not displayed in the SNP planning book. But another plant location is performing correctly for CC stock.
S SB

I have answered my own issue. The stock on hand macro is initial stock + Receipts - Demands.
Deployment is running in the evening and pushing out the stock, the day rolls over to the next day and then the deployment STR demand is considered history and as per the above formula is netting off the stock.
This is a symptom of running the SNP run in the evening, not at 00.01am. (Deployment STRs of stock are instantly in the past) which then affects the stock on hand balance.
Hope that is clear to anyone else having this issue.
Simon.

ARD 3.2.1 over Internet only Screensharing instead of full administration

I have an OS X 10.3.9 Server, running ARD Client 3.2.1, it should be remoted over Internet
I have an OS X 10.4.11 Server, Running ARD UNL 3.2.1, this is the Mac that remotes the others
I have some other OS X Server and normal machines, Running ARD Client 3.2.1, they are remoted over the local lan.
Remote Desktop in the local lan is running fine and without problems, but If i try to remote the 10.3.9 Server that runs ARD 3.2.1 (it is only available over internet), ARD says that only screen sharing is available, no full access... The internal Server-Firewall of the problem 10.3.9 Client i have shut down and in the Router where the 10.3.9 Client is connected to, i do forward the Ports
5900 TCP/UDP
3283 TCP/UDP
5353 TCP/UDP
5988 TCP/UDP
5432 TCP/UDP
5989 TCP/UDP
to the local IP adresse (Client has a fixed IP-Adress) of the client.
If i forward all Ports in the router in the lan where the 10.3.9 Machine is in to the 10.3.9 Client, i have screen-sharing only and no full access.
New installation of the machine, same problem....
Same Problem if i use ARD 2.2 instead of 3.2.1
Any help?

My router does not seem to be the problem as it works very well with other wireless devices. To be on the safe side I left my modem/router unplugged for over 2 hours. The problem also doesn't seem to be with my AirPort Extreme card as I am constantly connected to my network at full speed.
I recently just created a new account and was able to download and install 10.5.6 without interruption. It seems I only experience downloads timing out on my main and only account. Web browsing seems to be fine until moments after I start a download. The download will begin to download and then time out. Also, at this time pages fail to load. After a few moments I can then reload my download only for it to time out once again.
I tend to keep Safari clean by using the "Reset Safari..." option after every use. I just hope my only solution is not creating a new account every time I plan on downloading a file.

Video transmission over internet

Hi to all ,
iam developing video and audio transmission over internet using JMF in java.
it is working in the LAN with multicast ip address like 224.235.202:42050
my problem is when i want to transmit in the internet which ip address and port i need to use for transmission and receive.
please help me out.
if possible give me some sample code which is working in internet for transmission video and audio.

Hi khrisna,
i decide to make a conferrence over LAN first before it goes to internet.
It doesn't work yet. I modify the code AVTransmit2 and AVReceive2.
And I think I dont set the frame rate ( default from the web cam ).
Video and Audio encoding are set just like AVTransmit2.
I have a plan to make client-server transmit. In a Local Area Network,
I use socket network programming.
Now, I've a problem to clone datasource. I think someone in this forum has a problem as I have.
whats ur suggestion about these :
1. merge the datasource for audio and video capture first and then make it one processor. After processor has realized, cloned the dataOutput from processor, or
2. make a processor for each audio and video capture, after both processor has been realized then I merge the dataOuput from both. and then clone the mergedDataOutput.
which one can work better ? ur help,please!

Video Conferrence over Internet??

Hi all experienced JMF-ers,
I'm new to Java, of course JMF too .But I have a big will to learn it ..
I'm interested to develop such a video conferrence using JMF.
I've read JMF Guide ( although I don't understand all yet ), some refference, I learn several free source code on the internet ( it helps me to understanding JMF faster ) .
with my poor of experience I modify AVTransmit2 and AVReceive2 then I can make the code to transmit captured video and audio over LAN ( still one way stream ). Although it still makes a delay 1-2 sec.
But then when I look at this forum, I read several messages that video conferrence using JMF still have a problem such as can't transmit video stream over Internet yet.
Is there anyone who have solved this problem? ( I'm not testing yet for DaddyE's code for video conferrence) , if yes, I apreciated if you want to share ur depth experience about its high level architecture? And what's the algorithm ? I'll try to make the code by my self. Thanx before.
Regards,
Adhi

Hi khrisna,
i decide to make a conferrence over LAN first before it goes to internet.
It doesn't work yet. I modify the code AVTransmit2 and AVReceive2.
And I think I dont set the frame rate ( default from the web cam ).
Video and Audio encoding are set just like AVTransmit2.
I have a plan to make client-server transmit. In a Local Area Network,
I use socket network programming.
Now, I've a problem to clone datasource. I think someone in this forum has a problem as I have.
whats ur suggestion about these :
1. merge the datasource for audio and video capture first and then make it one processor. After processor has realized, cloned the dataOutput from processor, or
2. make a processor for each audio and video capture, after both processor has been realized then I merge the dataOuput from both. and then clone the mergedDataOutput.
which one can work better ? ur help,please!

User insade Plan Book during Core Interface

Please.
Maybe somebody has the same problem.
During the Core interface run at night whe are facing some problems into the Job due users inside the Planning book.
Somebody have any solution to disable the access from the users into the Planning book in a specific time also close the Users setion that are inside the planning book.
But we have to release access only to CRONPTS user that is the CIF Runner.
Thanks a lot.

what is your CIF doing? why is it writing to a PB where users are changing values
are they changing values into the same KF
if not,
Try to make your Planning area to KF lock and set the option of "do no lock read only KF"
then make the Kf that the CIF changes into a read only in the planning book (either in design or using a start macro)
if you cant change the above....
then
while vinods solution is elegant, if you dont have enough programming power this is what you can do
1. run a job before the CIF job runs to trigger a batch macro
this macro should set a flag in the planning books - say put value 1 in a cell somewhere in history
2. create another start macro in all your planning books which checks for this indicator - if cell =1 then make all rows output only by using the macro function row_input( ) = 0
now when the user goes into the planning book he will be in display only
3. when the CIF work is over it should release the lock by removing the KF value from that cell

Can't login to my verizon on my new galaxy s3 check user name and password in correct but says that it is not does login over internet

My new gaxay s3 doesn't login to my verizon on my phone comes up username doesn't match password and I entered right but doesn't work but does login over internet on phone

ericm1969 wrote:
My new gaxay s3 doesn't login to my verizon on my phone comes up username doesn't match password and I entered right but doesn't work but does login over internet on phone
Is the phone that you are running the app from, the primary line for your plan? I had an issue with my RAZR MAXX where with my Fascinate it worked fine, but the MAXX would not let me access it, as it was not the primary line. Once I created a new MyVerizon account username and password it let me in, and I could see everything. The original account worked fine if I ran the app from the primary line phone.

Error in updating ALV field catalog in selection tool for Planning Book

Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.

Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant

Upload data from Excel to the Planning Book

We are on APO 5.1. We have APO DP at the moment. I wanted to test upload of data from Excel to the planning book. I have tried several times. I have been unable to see any changed data in the planning. I do not get ANY errors during the upload. But I cannot see any changes that I made in the excel in the planning book. Please let me know what I am doing wrong. These are the step that I follow.
1. Go to planning book.
2. Short list only one key figure e.g Customer Forecast.
3. Go into Details All mode.
4. Download the file using the "Prepare File for Upload" option.
5. Open the saved Excel.
6. Change the values in the excel , save and close.
7. Upload the excel into the planning book using the upload file option.
I do not get any errors during all these steps. However, when I check to see if the values have been updated, the changes made in the excel are not updated in the planning book.

Hello,
Instead of selecting one key figure in data view, please select all key figures of the planning book and then try all the steps which you have carried out.
please revert after you carry out this.
Regards,
Prafulla

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

Planning book over internet

Similar Messages

Maybe you are looking for