Planning Layout KP75 - Max 30 columns allowed in the layout

Hi,
I am trying to create a Planning layout(Excel Upload for KP26) in Transaction Code KP75.
But when i am trying to create the columns, it is giving the error message that "Max of 30 column are allowed in the planning layout".
But my requriement is to have around 40 columns.
So is there any way that we can extend the max columns allows to 40.
Regards,
Shree.

What kind of planning you are doing in 40 columns? Can you please elaborate.

Similar Messages

The layout in master detail CASE in EXCEL(SPREADSHEET) getting confused

Hi.I'm creating many reports with Report Builder 10gr2.The layout is in PDF.Also I create those reports in EXCEL mode.(I put as the documentation says DESFORMAT=SPREADSHEET).All reports are display in EXCEL have layout the same as before as PDF in the case of tabular report or in case of simple matrix report.
But if we have a complicate report with data group master-detail after the creation as EXCEL the layout getting confused and the columns with master source are in the right and center of the detail columns and finaly the layout is not readable as before.Is there any workaround or solution for this so the layout in EXCEL is the same as in PDF in all cases (TABULAR-MASTER DETAIL etc.)?
Thanks in advance Panos.

Hi.I'm creating many reports with Report Builder 10gr2.The layout is in PDF.Also I create those reports in EXCEL mode.(I put as the documentation says DESFORMAT=SPREADSHEET).All reports are display in EXCEL have layout the same as before as PDF in the case of tabular report or in case of simple matrix report.
But if we have a complicate report with data group master-detail after the creation as EXCEL the layout getting confused and the columns with master source are in the right and center of the detail columns and finaly the layout is not readable as before.Is there any workaround or solution for this so the layout in EXCEL is the same as in PDF in all cases (TABULAR-MASTER DETAIL etc.)?
Thanks in advance Panos.

ALV color priority: The layout color or the cell color?

I'm trying to assign an ALV at the cell level but it is not showing up. I have specificed the column color at the layout level. Does the layout level have color priority?

Hi
see the doc and do accordingly
1. add one more field to ur final internal table say COLOR(4)
2. in layout wa_layout-style_fname = 'COLOR'. " if its grid
wa_layout-style_fieldname = 'COLOR'. "if its list
3. read table itab index 3.
itab-color = 'C410'.
modify itab index 3
4. see program SHOWCOLO for all color codes
1. Add a field of data type CHAR(3) to the internal output table.
2. Enter the color code in the appropriate field of the row to be colored in the internal
output table:
Code: 'Cxy'
C = Color (all codes begin with 'C')
x = color number ('1' - '9')
y = highlight ('0' = off, '1' = on)
3. Assign the internal output table color code field name to the IS_LAYOUT importing
structure IS_LAYOUT-INFO_FIELDNAME field and pass this structure in the ALV call
interface.
To enable row coloring, you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row. So, lets modify declaration of our list data table gt_list.
you should fill the color code to this field. Its format will be the same as explained before at section C.6.3. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by passing the name of the field containing color codes to the field INFO_FNAME of the layout structure.
e.g.
ps_layout-info_fname = <field_name_containing_color_codes>. e.g. ROWCOLOR
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
You can color an entire row as described in the next section. However, this method is less time consuming.
Coloring Individual Cells
This is the last point about coloring procedures for the ALV Grid. The procedure is similar to coloring an entire row. However, since an individual cell can be addressed with two parameters we will need something more. What is meant by more is a table type structure to be included into the structure of the list data table. It seems strange, because including it will make our list data structure deep. But anyhow ALV Grid control handles this.
The structure that should be included must be of type LVC_T_SCOL. If you want to color the entire row, this inner table should contain only one row with field fname is set to space, some color value at field col, 0 or 1 at fields int (intensified) and inv (inverse).
If you want to color individual cells, then for each cell column, append a line to this inner table which also contains the column name at field fname. It is obvious that you can color an entire column by filling this inner table with a row for that column for each row in the list data table.
Regards
Anji

Planning Layout Transport - Comparison Column

Hi planning experts,
I have planning layout which I transport in my qa-system. Everything is fine and working correct.
When I had a look in my corresponding layout in prod.-system I see that in the tab "data column" in column "Comparison columns" are activated. The activation is done via exit.
Question: what will happen with the layouts if I import them to prod. system. Is the column "Comparison columns" the same or will it overwritten with transport?

A coworker figured out by selecting the line break in the change subcomponent it wraps the column text.

Max no columns allowed in a table

i want to know how many columns are allowed in a table.maximum no of columns in table.

I hope this will be helpful for query
ORA-01792: maximum number of columns in a table or view is 1000
Cause: An attempt was made to create a table or view with more than 1000 columns, or to add more columns to a table or view which pushes it over the maximum allowable limit of 1000. Note that unused columns in the table are counted toward the 1000 column limit.
Action: If the error is a result of a CREATE command, then reduce the number of columns in the command and resubmit. If the error is a result of an ALTER TABLE command, then there are two options: 1) If the table contained unused columns, remove them by executing ALTER TABLE DROP UNUSED COLUMNS before adding new columns; 2) Reduce the number of columns in the command and resubmit.

How do I get the layout guides (A,B,C column headers and 1,2,3 Row Headers) to print with my spreadsheet?

How do I get the Layout Guides (A,B,C column headers and 1,2,3 Row Headers) to print on my spreadsheet? They are invaluable for discussing the data with my clients over the phone.
They appear while I am editing, but don't print with the spreadsheet. I know how to do it in Excel, but I am transitioning to Numbers. I can't imagine I have to type them into their own columns and rows. It must be a difference in vernacular that I can't find the solution in the User Guide. Can anyone help?

Hi ktjobauer,
Numbers is not Excel and Excel is not Numbers. Numbers is WYSIWYG (at least in File > Print and the actual printout).
I can't imagine I have to type them into their own columns and rows.
No, you don't. You can use the charm of Numbers to create cell references for your Excel clients.
In this Numbers Table, I have added some extra Columns that you can hide later.
Column B =COLUMN(A2)
Column C =HLOOKUP(B2,'Table 1-1' :: $1:$2,2,FALSE) [explanation later]
Column D =ROW(B2)
Column E =C2&D2
Add those formulas to the first Body Row (below the Header Row) and Fill Down.
Column C refers to another Table which you need only create once, to convert a Column number to a letter:
and so on from 1-26, A-Z.
You can move the second Table to another Sheet to hide it. Formulas will automatically adjust to keep the links between Sheets.
Now in the first Table, select and Hide Columns B,C,D. Formulas will continue to work with hidden cells:
Regards,
Ian.

How to create table with rows and columns in the layout mode?

One of my friends advised me to develop my whole site on the
layout mode as its better than the standard as he says
but I couldnot make an ordinary table with rows and columns
in th layout mode
is there any one who can tell me how to?
thanx alot

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

Difficult to achive the report layout with dynamic column names

I have a report layout as below.
So here the column names are dynamic.And each fixed row group has different calculations. I have a date parameter. If I select July 2013, then I need to show data from July 2012 to July 2013 with Columns(Jul-12, Aug-12...Jul-13). How to achive below layout
with dynamic columns?

Hi Sarayu_CM,
According to your description, you want to filter the records of prior year based on only one parameter selection. Right?
In this scenario, we can create two parameters. The first one is for user to select. The second parameter is based on the first parameter selection. We don't need to specify Available Values for the second parameter, but we should use expression to specify
Default Values based on the first parameter selection. Use the expression below:
=DateAdd("m",-12,FormatDateTime(Parameters!param1.Value))
Then we just need to apply a filter on the matrix/dataset to get the records which the date is between values in these two parameters.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

Membership rules does not work with UDF column name having the max length

Found a bug in OIM .
Membership rules does not work with UDF column name having the maximum length
Steps to Reproduce
1.Create a UDF having max column name length for eg UDF_USR_PERSONAL_SUB_DOMAIN_CO (lable = Personal Code)
2. Create a simple Rule like Personal Code = 7000
3. Assign this Rule as a member ship rule of a Group.
4. Create a user with Personal Code = 7000.
5. User doesnot get the group membership.
Thanks
Suren

Yes , i verified logs as well .
If you just decrease the column name length , w/o making change to any other attributes , it starts working ..
Thanks
Suren

How to adjust the layout column size in WPC?

Hi All,
I want increase/decrease the layout size in Web Page Composer?
After I dragged and dropped the html file, how to reduce the column width or height?
Thanks
Sundar

Hi
You can create a new layout with width and height as per your requirements and use the layout in WPC.
For creating new layouts, check the help link below
http://help.sap.com/saphelp_nw70/helpdata/EN/45/d2970be57f4ebbe10000000a11466f/content.htm
Regards,
Yoga

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

If you only see the time then that would mean that you see an entry of the current day (today).
History items from past days should have the date as well in the Most Recent Visit column.
You should be able to see this changing if you open the last 7 days folder and scroll down.

Which is the easy layout in swing that allows component setSize() ?

Hi,
I am new to swing, Can any body suggest me which one is the easiest layout to implement that allows setting height and width of components.
I have found that with layouts, setting component height and width do not work.
Thank you.

Using a LayoutManager and manually setting the size of components is to a large degree mutually exclusive.
It is the LayoutManager that determines the location and the size of the child components.
So, when using LayoutManagers, one only sets the size of the top level container. Its LayoutManager will do the rest, based on supplied constraints and the values that child components return on getPreferredSize, getMaximumSize and getMinimumSize.
You may influence these values by setting them explicitly on the child components.
Piet
Edited by: pietblok on 13-feb-2009 13:12

How to change font size, maximum column size in the result screen ?

hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
Sigmasvn

You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue

The environment has changed; the layout can no longer be executed

Hi guys,
I`m getting the below mentioned error message when I attempted to "Enter Plan Data" on my Layout
" The environment has changed; the layout can no longer be executed "
All I did was to create a Variable in Planning Area and then made adjustments to my Data Column in my Planning Function to include the Variable.
Please advice soonest possible

Hi Anurag,
I have a question of Variable.
I created a variable CURRMTH on Characteristic Fiscal Year/Period in my PLANNING AREA.
This variable CURRMTH has the following properties
Text Replacement : Medium text
Replacement Type : Fixed Value
Selection : Fiscal Year/Period is set to 001.2005
Now, I created a Layout
Fiscal Year Period in Data Column and Key Figure in Lead Column.
In my Layout: Data Column tab , I put the following
Heading : CURRMTH
Key Figure : NEWLISTKF
Variable
Fiscal Year/Period: CURRMTH
Do you forsee any inconsistencies here ?
One more question, do I also have to set my Planning Level / Package to have characteristic Fiscal Year/Period to Variable ?
Please help, mate!

Planning Layout KP75 - Max 30 columns allowed in the layout

Similar Messages

Maybe you are looking for