Planning Offline and HBR Behavior

Hi!
I am unable to get answers from Oracle/Hyperion on this one so I was hoping someone out there could clarify this for me.
If one downloads a web form which has a (e.g.) currency conversion rule attached to the form one can run this rule in offline mode. In this case the conversion rates are not stored in each individual cost center(entity) but at an Entity_NA member. When specifying which members to download with the form (drop down) this _NA member is not among them.
The currency conversion rule is simply doing this:
USD = LOC * Entity_NA->LOC->To_USD
What is happening in the offline mode is that the data is not currency converted and the LOC is actually deleted as well? Would this be consistent behavior with the offline capabilities?
Appreciates any input.
E

The difference between "offline" and "unmanaged" can best be explained if you regard a reconfiguration scenario.
If you offline a resource group, if afterwards a node goes down, the reconfiguration will trigger RGM to start the RG again on the remaining node.
On the other side, same situation, if the resource group is unmanaged, the reconfiguration will NOT trigger RGM to start the RG on the remaining node.
The same is true for device groups.
So I recommend if you plan maintenance on a resource group and/or a device group, switch it to "unmanaged". That way the cluster framework will make no attempt to start them again - even during a reconfiguration or new start of the cluster.
If you just want to shortly stop a resource group/device group, offline is OK, assuming you switch it online shortly after. The difference here is that the cluster framework still assumes it has to manage them.
Hope this helps.
Greets
Thorsten

Similar Messages

How to disable Planning administrators and interactive users to create or edit calc manager rules in their application ?

Hello,
According to the Calc Manager Designer Guide 11.1.2.3 and my testing :
- Planning administrators can edit the calc manager rules deployed into their Planning application
- Planning interactive users can create their own calc manager rules in their Planning application
But according to our IT governance, they should not be able to do it and specially in a production environment (and they were not able to do it in Planning 11.1.1 with HBR).
Any idea or trick to disable Planning administrators and interactive users to create or edit calc manager rules in their application ?
Thanks in advance.
Philippe

Well as far i Know....
- Planning administrators can edit the calc manager rules deployed into their Planning application ---Its aspected , as admin have to maintain the application and nothing wrong in that....
- Planning interactive users can create their own calc manager rules in their Planning application--They can create thir own rules only when they have proper access to calc mgr..if you don't have given access to calc mgr then they can't.....
Cheers!
Sh!va

WHAT IS THE DIFFRENCE BET WENN PLANNED DEPRECIATION AND UNPLANNED DEPRECIAT

WHAT IS THE DIFFERENCE BETWEEN PLANNED DEPRECIATION AND UNPLANNED DEPRECIATION

Hi
Usually depreciatio is planned for all the assets from the date of purchase of the asset based on cost of asset, useful life of asset, scrap value , etc.
In Planned depreciation we depreciate the asset as per our planned figures for the entire life of the asset
where as in unplanned depreciation, depreciation is not as per our planned figures, it may vary due to fire, theft, partial damage, etc.
Here not only the depreciation amount but also the useful life of the asset will be effected.
Assign points if useful

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

PS: BAPI For Planned Progress and Actual Progress

Dear All,
Is there any BAPI available for Planned Progress and Actual Progress for PS Project.
Regards,
Sohail

Hi,
Try using this report s_alr_87013532.
Also for planned and actual progress the table is rpsqt. Could not find any bapi for the progress
Regards
Hiren K.Chitalia

Tcode for planned production and actual production

Hello,
I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
Thanks in advance

Hey Suman,
i have the same problem, did you find a solution?
thanks

Open planned orders and production orders

Hi friends,
I have one issue with my client.
Client has 1 lac materials in sap .Now he wants extract all materials open planned orders and open production orders with quantity and dates.
Please tell me the process how i can extract the data from sap for above requirement.
Thanks,
Manoj

Hi Manoj,
For open planned order and production order select the respective box.
But one suggestion. Try to convince client that this report will take a lot of time as you have mentioned 1 lac materials are there.
You can exclude system status and get it with below screen as mentioned already.
But my suggestion is to run the report at night when the system load is very less. Please create a background job one for planned order and another for production order. Then run it in midnight as per the customer requirement in background. You can automate the process by sending automatic mail to customer. Please refer the below link to trigger mail.
Mail Trigger with TEXT file via JOB run
Regards,
Krishnendu.

How Distinguish planning data and Actual data in a Planning cube

Hi,
I want to dispaly planning data & actaul data in a query how can i do it?
in my query it is showing all the requests it is not distinguishing.

Well use infoobject 0VTYPE for actual and plan differentiation
and 0VERSION to categorise which version of Plan data it is,typically you might have different planning versions .
Example
0VTYPE = 10 actual
0VTYPE = 20 plan
0VERSION = 001
0VERSION = 002
0VERSION = 003
Business decides which 0version value to be taken as final planning version once freezed.0VTYPE = 10 for actuals is always one ,it do not have 0VERSION to be taken in to account.
Hope it Helps
Chetan
@CP..

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Delete planned order and pr's

Hi, pls advise how to delete system generated (mrp) planned orders and pr's? incase the sales order is cancelled, we need to cancel those planned order or pr's generated earlier. pls advise how to delete the same.

Hi,
If the supply proposals are not firmed, then the next MRP run at plant level will clear all the planned orders / purchase requisitions which are not needed.
Planning mode with 1 should be more than enough to take care of that.
Regards,
Vivek

Questions on porting family plan lines and a prorated final bill?

Hey there! I've done some searches on the board before posting and encountered tidbits of information I found useful, but I couldn't get all of my lingering questions answered from older posts so here's my situation:
My number is the primary number on a family plan (3 lines, mine included) with Verizon, and I'm considering porting it along with the two other lines elsewhere. All three lines are no longer in a contract and are month-to-month (the 2-year agreements ended many months ago and none of the lines have been upgraded or anything since then). I'm planning to move them all to separate prepaid services through another carrier.
I'm doing my best to gather enough information about how to go about moving all three of these family plan lines with the least amount of hassle , so I've got some questions I hope I can get answered. Thanks for any assistance!
This is my understanding:
-I'll need to contact my new carrier to have a given number ported, correct? And that line will be subsequently cancelled on Verizon's end, with no ETFs since none of the lines are tied to a contract?
-Should I port the second and third lines first and not port the primary number (mine) first, so asto not cancel all the lines of service before they're ported? I'm okay porting one number at a time AKA separately instead of all at once if that simplifies the transfer process.
-When the porting process takes place and my Verizon service is cancelled, does Verizon prorate the remaining days on my billing period from the date it's cancelled, or do they still bill up to the end of the cycle? I hear it's better to wait until the end of my billing cycle (which for me is the 9th of every month) to initiate the transfer(s) so that I don't have any billing issues, but moving all three numbers on one day (even separately) sounds kinda daunting.
-Do the phones I currently have under Verizon simply "disconnect" or deactivate once service is cancelled? Will they no longer be associated with my family plan lines and therefore be free to be resold or handed off to other family members who are using Verizon? I notice many phones on eBay/Craigslist list a "cleared ESN" as a requirement for someone to activate a used phone on Verizon and wanted to know what that was about.
Thanks for any help on these concerns!

michae2414 wrote:
Hey there! I've done some searches on the board before posting and encountered tidbits of information I found useful, but I couldn't get all of my lingering questions answered from older posts so here's my situation:
My number is the primary number on a family plan (3 lines, mine included) with Verizon, and I'm considering porting it along with the two other lines elsewhere. All three lines are no longer in a contract and are month-to-month (the 2-year agreements ended many months ago and none of the lines have been upgraded or anything since then). I'm planning to move them all to separate prepaid services through another carrier.
I'm doing my best to gather enough information about how to go about moving all three of these family plan lines with the least amount of hassle , so I've got some questions I hope I can get answered. Thanks for any assistance!
This is my understanding:
-I'll need to contact my new carrier to have a given number ported, correct? And that line will be subsequently cancelled on Verizon's end, with no ETFs since none of the lines are tied to a contract? All correct - the port happens via the NEW carrier.
-Should I port the second and third lines first and not port the primary number (mine) first, so asto not cancel all the lines of service before they're ported? I'm okay porting one number at a time AKA separately instead of all at once if that simplifies the transfer process. You can do it this way - but based on your next question, you wouldn't want to do it this way. You can't do both!!
-When the porting process takes place and my Verizon service is cancelled, does Verizon prorate the remaining days on my billing period from the date it's cancelled, or do they still bill up to the end of the cycle? You have already paid for the current month's service - you are billed in advance for the coming month. What WILL be billed is any texting, roaming calls, data charges, etc, that have occurred during the month that were NOT billed in advance. I hear it's better to wait until the end of my billing cycle (which for me is the 9th of every month) to initiate the transfer(s) so that I don't have any billing issues, but moving all three numbers on one day (even separately) sounds kinda daunting. But YOU don't have to do anything - your new carrier will deal with it, and it seems to me it would be better to end the service on all three at one time, since it is one account. You can ask your new carrier what they recommend. There should be no issues with porting all three lines at once.
-Do the phones I currently have under Verizon simply "disconnect" or deactivate once service is cancelled?Yes - once the number is ported to the new carrier, the phones will no longer work until they are activated with another number. Will they no longer be associated with my family plan lines and therefore be free to be resold or handed off to other family members who are using Verizon? This is correct, and another reason for doing the port at the end of a billing cycle. Issues have come up with transfers done mid cycle - and because the account had been billed and paid for the full month's service, the phone's ESN was not released until the end of the billing cycle. I notice many phones on eBay/Craigslist list a "cleared ESN" as a requirement for someone to activate a used phone on Verizon and wanted to know what that was about.
Thanks for any help on these concerns!
It may take several days for the numbers to fully port over and have all services working correctly, and for the old phones to be fully "released" from your account to be used on another Verizon account. I would wait a week or so after the port, then call CS and check the ESN status of the old phones to see if they are "clear".
Hope this answers most of your questions. Post back if you need further clarification.

When I click on Firefox, the page comes up as "work offline" and I have to uncheck this option under "File" before I can get on line. How can I disable this automatic start option "work offline"?

Firefox starts up "Work offline" and I am notified "Having trouble loading page." I am then advised to "uncheck" the "work offline" option and "retry" getting connected to the internet. I would like Firefox 4 to automatically come up as a Browser on line, just as 3.6 did. How can I achieve this goal? Is there a way to disable the automatic "offline" start-up?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How can i stop firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages

How can i stop Firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages
i use Firefox 22.0 on windows 7
it's about one week that it ask for "Network Connections" when i'm offline and disconnected from the internet even when i don't open a save page and just opening Firefox with a blank page
Image of the Error:
http://home.sums.ac.ir/~rowshansh/firefox.png
http://www.sums.ac.ir/~rowshansh/firefox.png

Did you check the network setting?
Sounds that you have set to connect automatically when a connection is not available.
*http://kb.mozillazine.org/Autoconnect
*http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

IMac 21" late 09: Slow, screen flickering/tearing and odd behavior - the problem that puzzles everyone

PLEASE HELP!
My iMac 21" late -09, started acting a bit wierd a year ago. Things got worse rapidly, it got slower, the screen flickers/tears (see link below), short moments of lost internet connection, lost connection whit the keyboard (might be keyboard that is broken), almost overheats when gaming and odd behavior on some webbsites whit galleries and/or videos.
Let's begin whit the screen: it's not vertikal lines or major distortions, just a subtle horisontal line that "wanders" from bottom to topp and some lagging from time to time. Looks like this: http://cl.ly/3i2W2o3S1D2T
The wierd thing is that hi-res does not mean more "tearing". Yes the lagg and risk of tearing increases, but the connection seems to be: lots of movement=tearing. So a pixeld 240p video of people dancing can be way worse than a news debbate in1080p!?!
Lost connection whit internet and keyboard rarely happens and is probably due to something else, but thought that was good to have in mind.
Odd behavior: galleries ex: when browsing images on Facebook in fullscreen, the image sometimes jumps around in the beginning and when clicking on next the same picture might appear again or just nothing at all. When scrolling down overwiewing a gallery, the updating stops and you can't scroll down further. This problem appers mainly on FB, deviantart also acts a bit wierd but there is often small issues whit image sites. Doesn't help to switch browsers either!
Videos: Youtube is horrible to use, stops loading, dosen't start loading, erases everything loaded (grey bar disapears and reloads), refuse to switch ressolution and suddenly stops the video like it was done! "ehh.. wasn't this 2min long? Not anymore, now its 34sec!". Mainly a Youtube problem but many similar sites can be a bit problematic to use.
NO, it's not the HTML-5 problem or any standard flash issue and using a different browser dosen't help!
Worst is the fact that most of these errors are not constant! One day your watching youtube or mabey a movie in VLC, a bit laggy, but almost no problem. Next day **** brakes lose and after 2hours of struggling you are ready to stabb yourself in the face!
What i tried: Most easy buggfixes that might cause the above problems, updating most things, Switched from OS X SL to OS X ML, complete reinstall and some things i probably forgot by now. Then went to MacStore for repair, they didn't find anything wrong and said it worked fine after the standard diagnostic/repair program!?! Went home and everything was the same! Went a second time to MacStore, same result.
So I'v reinstalled a few times and it seems to improve the Mac. But 2-3weeks later every error is back, even if I barely installed or downloaded anything!?!
Any idea what this could be? Or is the graphic card broken and MacStore has a blind, inbred muppet as a technician?

No I didn't. The first time i explained the problem thoroughly and thought that they just couldn't miss such a visual error. I was wrong. The second time the technician wasn't there so i showed the above clip to the salesstaff and explained everything onceagain. Later the technician called me and we talked for 10min.
Btw, the problems always "manifests themselves", just varies between strenght and frequence.
But all other issues aside, what could cause the tearing of the screen as seen int the above clip?

I just brought a apple protection plan as my phone warranty is going to end in a day, when i am trying to enter the protection plan code and my phone serial no its showing an error message try after some time is there any solution to that?

i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
As i need the warranty to extend for another year please help me regarding this issue.
When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?

Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

Planning Offline and HBR Behavior

Similar Messages

Maybe you are looking for