Plant Maintenace report
Hi,
We want to see the material stored in the plant on the basis of functional location, Equipment.
Critically of an equipment/ Functional location is being mentioned in the tab location .
Stock condition of materials ( Spare parts) is desired based on functional location.
Best Regards,
Hi Mahesh,
The report asked by you i.e. Material with equipment or Functiona location is possible but not as a standard one........it comes under development & can be easily done......better talk to your ABAP consultant.........
Regards,
Similar Messages
-
Hello Guru's
I am new to plant maintenace, I need to create reports for equipment log.
fields in the report are
Notification#, order#, Notification type, TechId#, functional location, event description, Equipment Number, Description,date due (basic finish), Completed by ( from conf#), Completion date(Actual finish), Reviewed by (from Action Log), Date closed.
Please suggest me what are the tables should I conider to create report for above data.
Thanks
with regards
Srikanth Pusina
Edited by: Srikanth Pusian on Jun 4, 2008 5:34 PMI am not sure about action log.. but here are tables..
Table Name Description
AFAB Network - Relationships
AFFH PRT assignment data for the work order
AFFL Work order sequence
AFIH Maintenance order header
AFKO Order header data PP orders
AFPO Order item
AFSPOPR Split Operations in an Order Split
AFSPREL Relation Between Orders in an Order Split
AFVC Operation within an order
AFVU DB structure of the user fields of the operation
AFVV DB structure of the quantities/dates/values in the operation
AUFK Order master data
AUFM Goods movements for order
HIKO Order master data history
HIMA PM order history - materials
HIVG PM order history - operations
PMCO Cost structure of maintenance order
PMCO1 Cost profile: Value category proposal
PMCO3 Plan version: Estimated costs for maintenance orders
PMCOQT Quantity structure for the maintenance order
PMFLAGS Flags if certain conversions have been run
RESB Material reservations
T003O Order Types
T003P Order Type Descriptions
T024I Maintenance planner groups
T350 Maintenance Control Parameters: Client/Order Type
T350E Access sequence addresses for address proposal purch. data
T350I Combination of order type and PM activity type allowed
T350W Maintenance control parameters: Order type plant
T352B Technical report
T352R Maintenance revisions
T353I Maintenance activity types
T353I_T Maintenance activity type description
T356 Priorities
T357M_T Operating condition texts
T370N Object link category
T370N_T Language dependent texts for T370N
T399I Planning plant parameters
T399J Maintenance parameters (client)
T418V Item category proposal for component assignment
TPAER_PM Partner Functions in Partner Schema (PM) with Copy Flag
TPEXT Profile for external procurement
TPEXT_T Text tables for profiles (external procurement)
TPMIM IM allocation key
TPMP Maintenance profile
TPMPO Maintenance order processing profile
TPMUC Deactivate the Update Check CO_ZV_CONSISTENCY_CHECK
TPMUS PM/SM - User default values
VIAUF_AFVC PM order operations
VIAUFKS Maintenance order (view)
VIAUFKST Maintenance orders (view) -
Plant Maintenance Reports & Report Writer/Painter
Has anyone ever used Report Painter or Report Writer to produce SAP Plant Maintenance Reports? If so, what was your experience in using this tool and how difficult is it to produce reports?
The report that needs to be generated is for overdue PM orders (PM09) ....these are scheduled preventive maintenance orders.
We need to be able to determine if they are completed and if they are on time. This report needs to have the flexibility to choose the following
Functional Locations
Equipment
Plant sections
Main Work Center
Basic finish date / Planned Date / Overdue date (to be determined)
Maintenance Plan
Maintenance Activity Type
Group
We need to be able to run a chart from this data to show how many PM's are behind, how many were completed on time compared to the requirements, and any other chart that would be available (i.e. pie, line, bar etc.).
Thanks
RuthieHi,
the fields that you want in ur report must be available in ur operating concern data structure,,,
pls check if the characteristics and the value fields that you require is available in the data structure,,,
check KEA0 transaction..
Reward points if useful -
Hello every one,
In my project, my client is asking for plant availabilty report. Now in this report they want availabilty of the report at plant level in percentage. I am not getting how to get these figures becoz in PP there is nothing like monthly planning of working hours at plant level. Any body has worked on same required with work around solution. Kindly help me in this.
Regards
AbhishekHi Abhishek,
This require a customized report. There are certain parmaeter you need to consider in developing this report which varies from client to client according to their business requirement. Here are some of the key point you need to consider.
1) Case 1: In a contineous process production which is plan for 720 hrs of operation if the equipment has breakdown for 72 hrs in a month then the plant availability becomes 90%
2) Case 2: If an equipment is breakdown and have the stand-by still the production continue without any stoppage. In this case plant availability is still 100%.
3) Case3: If there are shortage of raw material production qty plan may reduce or production stoppage still the plant availabilty will remain 100%.
4) Case3: Any shutdown in the utility section which are responsible by maintenance are consider to be unavailability of plant for production.
What I am saying here may not be same business scenario you are having now. What you can do it try to segregate the malfunction notification which are affecting production and non affecting.
Secondly, try to create different notification type or customized table to capture any parameter such Utility data which are affecting the production.
Make a customized report /query for the plant availability. Hope this info is helpful to you.
DP
Plant availability literally speaking is the availability of the plant irespective of the production plan. -
Hi,
I m in roll out Project, there are 4 plant .How I can see palnt wise Staus? Give me the T.code
Thnx
PraveenDear Praveen,
You will type SAP1 on Easy Access, then Go to MM &SD see all reporting.
Regards,
Devendra -
How to Add plant in report?
Hi ,
I have to create a cost center report which is for actual and plan comparison.
Situation is i dont have a business area, i have only plants to value my costs in my report in the column. I am using CCSS table to data extract .I have a field name werks in the table .
How to add Plant into my report ,Can any body help me on creating a set on this. Or is there any solution for this .Hi,
If a field in FBL1N is not filled it might be because the field has to be created as a special field.
In the Line item Display list in FBL1N follow this menu path: Settings -> Special fields, and add the fields you want from relevant table.
The fields are later available for display,and you can choose them from the Line item Display list following this menu: Settings -> Display variant -> Current. From the hidden list you can now choose the fields you want to have shown. If the technical name is shown for the fields, the special fields are all starting with '1-U_'. It's important, that you add the Special field, if the field also exist as Standard field.
The Special fields are shown in the buttom of the Hiddden list.
Please also read the solution part of note 215798 for some very import- ant steps to be aware of.
But, for having a field shown in the vendor Line Item Display (FBL1N) the field has to exist in the vendor Line Item. If this is not the case, you will evt. be able to see the field in FBL1N by using Offsetting account info.
Check if field WERKS is in the structures RFPOS and RFPOSX. If not, then you need to add the field to the structures RFPOS and RFPOSX. When the structures have been extended with the field then you need to run the reports RFPOSXEXTEND and BALVBUFDEL (in the same way as seen in the solution part in note 215798).
Please assign points if it useful
Regards
Ravinagh Boni -
Foreign currency in Plant abroad reporting
Dear SAP gurus,
our customer activated a plant abroad in GBP local currency different from company code local currency (that is EUR).
If a outgoing invoice (= customer invoice) is issued and posted in EUR for our plant abroad, VAT report enables to produce output in GBP currency. GBP amount is calculated according to historical exchange rate. In BSET table this information are stored in fields BSET-LWSTE and BSET-LWBAS
This is OK fou our customer, but they have an addttional request on customer line item report (SAP transaction FBL5N).
The request we have been asked is: is it possible to display in FBL5N layout also BSET-LWSTE and BSET-LWBAS columns?
Otherwise how can these information, that is amount in plant abroad currency, be displayed in line items report?
Is There any standard line item report that allow user to display this information?
We're looking forward for your answer
Thank you in advance
Kind regards
GianlucaCarl,
I found some SAP notes relating to this message. Check in service.sap.com/notes with search term "SG105 billing accounting". By the way, which release are you on? -
Hi All
There is a reporting requirement , where the user wants to club certain plants under one . The report should ultimately show him
Plant 1
Plant 3
Plant 6
Plant 7 .....
and
Plant 1 = Plant 1 + Plant 2
Plant 3 = Plant 3 + Plant 4 + Plant 5
I tried display hier , but there seems to some issue with overall result in the query . Then I tried structure but it does not show the overall result.
Pls advise if there is any other way.
Thanks
Message was edited by:
BW BWHi,
As suggested you have several ways.
- The navigational attribute is these plant groups are fixed and isn't variable each time a user enters the query; otherwise you can use virtual char...
- The restricted key figures: create a variable called "plant group 1" based on site and processed by user input. Create a RKF based on plant filtered to this var. This RKF will then show results only for the plants selected by the user. Create as many RKF / vars as site groups you need.
- Structure: this implies that you know "a priori" the number of site groups you will have; proceed by creating element filtered to your site groups (could be vars as well); the total could be the sum of all your elements or simply a non restricted element would show overall result.
- hierarchy: I don't know why you have an issue with the overall result but it should definitively work
hope this helps...
Olivier. -
Plant maintenace notifications status in BI
Hi All,
I am in the process of developing a report by name "NOTIFICATIONS WITHOUT ORDER - FOR STATUS OUTSTANDING & STATUS IN PROGRESS"
for this report i need to get the plant maintenance notificaion statuses into BW.
Could you please help me by giving the information regarding notification status standard extractors.Hi,
Plant Maintenance comprises the following activities:
Inspection
All measures which establish the actual condition of a technical system
Preventive maintenance
All measures which maintain the ideal condition of a technical system
Repair
All measures which restore the ideal condition of a technical system
Other measures taken using the maintenance organization
For more info on PM go through the below link
http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/frameset.htm
Regards,
Marasa. -
TERMAB, TERMBI fields belongs to which table in plant maintenace module
Hi gurus,
I am looking for the tables of TERMAB, TERMBI fields.
If we run iw39 transcations
we will get so many fields,
in that Duration: From: To : fields are TERMAB, TERMBI fields , i want to know in which table it will be get stored.
With Regards
Lohith GowdaFrom SAP Help:
The respective reference dates are as follows:
1. for notifications, it is the notification date
2. for completed orders, it is the reference date of the order completion
3. for orders not completed, it is the order start date
This is the reference date period for which report should be shown. -
Plant Maintenance Report Transaction
Dear All,
Iam sending the list of report client needs .i need your help in wether it is possible or any development required .
Breakdown Analysis
Equipment Monthly Cost
Cost Analysis
Insurance Amount on Each Machine
Electricity & Fuel Consumed on Machine
Fleet Maintenance
Consumption of Fuel on Each Vehicle
Service Cost spend on each Vehicle
Spares Replacement Cost on each Vehicle
Please help me out .Kindly send your reply .
Thanks & Regards
Navinhi
>{Breakdown Analysis- Yes using MCI7
Equipment Monthly Cost- Using MCI4
Cost Analysis -MCI8
Insurance Amount on Each Machine-May be Warranty claim processing
Electricity & Fuel Consumed on Machine-Using measuring point ,counter
Fleet Maintenance-YES
Consumption of Fuel on Each Vehicle-YES-MCIZ
Service Cost spend on each Vehicle-YES- MCI4 also chek in MCI4
Spares Replacement Cost on each Vehicle-YES using MCI4,also check MCI4}
regards
thyagarajan
Edited by: thyagarajan krishnamurthy on Feb 24, 2009 1:56 PM -
Hi all,
I am very new to SAP-PM.Basically a PP /QM Consultant.
I need your help in developing three BI report for SAP-PM.The requirements are as follows.
Report 1.
a. % breakdown time.
b. Causes of issues broken down to the most granular level.
c. Number of failures by week and month.
Report 2.
a. % breakdown time.
b. % repair time.
c. Number of failures by week and month.
d. Number of failures by machine and functional location.
Report3.
a. Problems reason by functional location.
b. Function of each piece of equipment and breakdown time and fix.
c. Labour and monetary value of each fix for each piece of equipment by functional location.
d. Number of failures by week and month.
Pl let me know tables and fields and logic to develop such a report.hi
you can check [PM Tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/pm+tables] and SE81 and use the information system
regards
thyagarajan -
Maintenace Report RSPO0041 blocks all batch queues
Hi there,
a default maintenance report RSPO0041 (reorg of spool) on my app sever seems to hang and blocks all BTC queues. This can only be solved by restarting the app server.
I deleted the sheduled job definitions but the job started again. I do not know which definition has started this job.
Any Ideas?
This is only a test server and I do not use spool files.
Thank you in advance,
Andi
10 BTC 2572 läuft ja 551699 SAPLSTUP 000 DDIC
11 BTC 3660 läuft ja 465297 SAPLSDI0 000 DDIC Direktes Lesen TADIR
12 BTC 2752 läuft ja 378894 SAPLSDI0 000 DDIC Direktes Lesen TADIR
13 BTC 2292 läuft ja 292492 SAPLSDI0 000 DDIC Direktes Lesen TADIR
14 BTC 4100 läuft ja 206089 SAPLSDI0 000 DDIC Direktes Lesen TADIR
15 BTC 3828 läuft ja 119686 SAPLSDI0 000 DDIC Direktes Lesen TADIR
16 BTC 4472 läuft ja 39404 RSPO0041 000 OERDING Direktes Lesen TSP01
17 BTC 1024 läuft ja 33284 SAPLSDI0 000 DDIC Direktes Lesen TADIR
Edited by: A. Hartmann on Apr 27, 2009 10:52 AMAndi,
Did you find all RSPO0041 batch jobs in SM37, searching for all job status, * for after event, and future dates?
Delete all entries.
Also, as a test, you could change your profile to have no Batch processes and restart. Then you could find and delete all RSPO0041 jobs without them running. Then add back the Batch processes.
You may also want upload a trace on the batch process.
Good luck!
PJ -
Plant Main report Information Systems MCI# PMIS- drill down to WN/WO
Hello,
When using the MCI#-PMIS- Analysis Report. The lowest level on the standard drill down is to Month. Is there a way to drill down all the way to WN or WO?
Thanks.SDN is the place to discuss technical problems..
Please avoid such weird post.
G@urav. -
Hi,
We want to see the material stored in the plant on the basis of functional location, Equipment.
Critically of an equipment/ Functional location is being mentioned in the tab location .
Stock condition of materials ( Spare parts) is desired based on functional location.
Best Regards,Dear Mhesh,
It possible as your requirement to see all default data .if not we can maintaine variant then also it displays
Go to T-code IW28
whatver data availble all data availble
Hope this helps you
Prem.
Maybe you are looking for
-
Complex interface determination fails for 0-N mappings
We have a mapping question for the following scenario in PI 7.1: One message needs to be mapped into two target structures, it comes from the same sender and goes to same receiver. We need to call two different BAPI in the same SAP end system simulta
-
Safari will freezes opening links in new tabs or windows
I've noticed that Safari will briefly freeze when opening a link in either a new tab or a new window or when a page is set to automaticly reload after a set time while there are other tabs or windows opened. It does this on all web sites. I took a lo
-
Batch processing photographs in Photoshop Elements 11
Hi everyone, I've been scanning in a lot of old photographs of late. Many (probably all) of them would benefit from application of the "dust & scratches" filter, but it doesn't appear as an option in the "process multiple files" pull-down. I've hea
-
BADI for populating the Header data in MIRO
Dear Gurus, I have tried to find the BADI for MIRO transaction as I want to populate the RKBP-XBLNR (Reference), RKBP-BUPLA (Business Place), RBKP-SECCO (Section Code) automatically. But I am unable to find any BADI to do this. Kindly advice, Thanks,
-
Compound path envelope disort - urgent - please help!
So, I really need to do a "car of the year" type of badge in illustrator. I have the flags vector (grouped) and the hallow circle created whith the shape builder tool as a compound path. (see image). And now, the obvoius problem. The only thing I cou