PlatformRequest issues with Siemens/Samsung mobiles

Hi -
I'm making an application for mobile phones allowing the user to dial a number from the phone. I've used:
String number = "123";
platformRequest("tel:" + number);
(the class 'this' extends MIDlet)
This works on a Siemens emulator and phone but on my Samsung D500 it doesn't work at all. On the Samsung emulator it asks me to check the platformRequest configuration. I know the D500 supports MIDP v2.0 so has anybody else run into trouble when programming a Samsung?
Cheers
Ben

Obviously "platformRequest" means you do a request that needs platform support. Logically this request will not be platform independant. Therefore, not all devices will support the "tel" command!

Similar Messages

  • HT201413 iTunes Reinstall - Issue with starting "Apple Mobile Device" service

    the latest itunes update did not install successfully.  i was not able to start itunes thereafter.  i went through the various suggested steps, including uninstall/reinstall.  now i get error that "Apple Mobile Device" service cannot be started.  any suggestions please?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • IChat issue with Siemens SE567 Router

    I have just signed up with a new ISP and they insist I have to use the Siemens SE567 router. It works fine for the internet most of the time, but I can not do screen sharing or video chat. The strangest thing is I could do both with my last ISP the only difference now is the router and ISP. I have tried all different configurations and been on tech support with both Apple and my ISP to not avail. Anyone else having any issues with this router?
    Thanks,
    Pam

    Hi,
    I am not sure if this was you I was Texting to yesterday (20th).
    I linked the person to the Port Forward site
    Their Set up pages were blue and white as opposed to this grey and Orange.
    They were set to UPnP and NAPT as it is called on this device had no ports set.
    The Computer was using Tiger with the Firewall Off.
    Stealth (Ping Blocking) was also Off
    We tried calling from both ends.
    The result was an Error 7 at the Siemens end until we made sure the Quicktime Setting was done.
    A second computer that had no camera had iChat turned Off to prevent any confusion about IP addresses.
    The User did not think the ISP Offered VoIP and had no Vonage device (an issue with ichat 2 and 3)
    My Error 8 log did not identify that the far end was using Tiger and iChat 3
    (Should list port 5060 as SIP port)
    Firewall in the Siemens was set to Low.
    DMZ was Off.
    There seem to be no Ping Blocking (Not that the log got that far) or DoS or SPI settings.
    File Sharing in System Preferences > Sharing is not an issue in Tiger so not checked.
    From reviewing the Chat I can see I did not check if System Preferences > Quicktime > Streaming was at 1.5Mbps
    If you have to change this and iChat is Open restart iChat.
    Also in the Firewall on the Mac in the Advanced Button is Block UDP Connection Active ?
    IF so it will need deselecting as most of iChat's A/V Stuff is on UDP.
    The Port Forward set of Pic suggest that the one they had was Branded for Telus as an ISP so it could be that this has slightly different software/firmware.
    I suggested posting here as I had run out of iDeas on this device.
    8:09 PM Thursday; January 21, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Mini Display Port to VGA Adapter Having Issues with My Samsung 40" HDTV

    So I ordered the brand new 15" i7 Macbook Pro along with the Apple wireless magic mouse and wireless keyboard after having bought my HDTV (went on a bit of a spree) with the intention of using the TV as a monitor for couch surfing. But, upon hooking up the adapter to the TV, my macbook's screen flickered between that blue transitionary screen and it's desktop screen. It did this for a few minutes. I jiggled the cable thinking that there was a loose connection somewhere as that was the problem with my previous mini DVI to VGA adapter from Apple. I did a little research and it turns out that they released a firmware update in 2009 for such a problem. I downloaded the update and attempted to install it but it did not determine that there was even an adapter connected. So, I proceeded to call Apple, they man was very calming to talk to and make all of my problems seem to melt away, but there were no solutions reached. He thought that maybe my TV either had a problem or was incompatible with the adapter (incompatible with a VGA connection? can you get any more analoge that that?). So, here I am, the adapter seems not to have a problem with regular monitors but I am still experiencing intermittent disconnects from my TV. I still, superstitiously jiggle the connection whenever I have dropouts but that really doesn't seem to be the issue here (or at least I hope not because that could mean port issues with my new laptop). Any suggestions? I noticed, after changing some settings on my TV, in an attempt to remedy this, that the TV was displaying the picture funny, I turned the TV off and then on again and it fixed the problem. That being said, perhaps I just need to turn my TV completely off when I'm not using it, as I have been just letting it go into standby. Maybe it needs a restart every so often much like my computer. I don't currently have data to support that theory as I just recently tried turning it off, but, since then have not had dropouts.

    You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
    I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.

  • E4200 Connection issues with two Samsung Blu-ray players at a time

    Hi everybody,
    Sorry about my English,
    I have E4200 V1 router, it is working fine, and I am connecting different type of devices with it like desktop computer, laptop, iphone, printer and two Samsung 3d smart Blu-ray players. Everything is working fine. I have charter cable internet.
    But the problem is this: when I play movies via Netflix on both Samsung Blu-ray players (one player is in my family room and second player is in up stare bedroom) one player stopped playing movie and disconnected from the wireless network and message shows (check your wireless network).
    When I stopped/turn OFF the second Blu-ray player, then the first one got connected with network and start playing movies.
    I can’t run both Blu-ray players at the same time on this E4200. When I was playing both players at that time all the other devices I mentioned above was connected with the same network but were not performing any task, those were in sleeping mode.
    I also changed the QoS, Quality of Service setting to high priority using MAC address for both players, but it is still not playing both Blu-ray players at the same time. Just one plays the movies at a time.
    Any idea or help to solve this issue, I would really appreciate that.
    Thanks,

    Hi, chzsoona. Have you tried changing the channel of your wireless channel? You may try channels 1, 6, 9, 11. If you have a version 1 router, check your firmware version it should be 1.0.05. If you have version 2 router then you may upgrade it then use Linksys Smart WiFi so you can take advantage of the Media Prioritization. To know more about your router you may use this link: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=7824947fe4444ac3ad5cc...

  • Display Issues with 50" Samsung Plasma

    I have a 50" Samsung Plasma, and I am trying to get the display settings right with my mac mini.
    I have used the screen with my 2009 macbook running snow leopard via the mini display port -> hdmi cable with no problems, however, I wanted use it with my 2007 mac mini running tiger, via a dvi-hdmi cable. I got the cable and today have been trying to set the display setting right.
    Whatever resolution I set the mini to, it won't fill the tv screen. If I select overscan, the tv keeps loosing the signal. I've been through all the settings on the manual but still to no avail. I could probably live with this as I'm displaying keynotes on a black background, but the picture is really pixilated. And video especially doesn't cope. Really unsure which end is the culprit!
    Anyone have any clues. Eventually I am going to split the signal between two screens, but need to get it right on the first one!
    Is it Tiger? DO I need to upgrade to leopard or snow leopard (both are at my disposal)

    You are halfway there. I have a Samsung LCD and had the same problem. There is a setting on Samsung screens to do this.
    For me it is under 'picture options' and is a setting called size. I chose 'screen fit' and it all works like a charm.
    Hope that helps.

  • Re: issue with new Samsung Galaxy S5

    I recenty upgrade from an IPhone to the Samsung Galaxy S5 and while it has worked great so far, today, while removing the protective case I purchased, the little robot guy came on the screen, the screen then went blank, some power save mode or what not came up and now the red Verizon screen is stuck on my phone and I cannot use it.  I have tried removing the battery, as the phone gets too hot with the battery in, removing the Sim card etc to no avail....short from taking the phone to a store when I have time, any suggestions?  I cannot press any buttons or get out of the screen except by turning the phone off by taking the battery out....very frustrated!!

    Try holding the power and volume down buttons simultaneously for 15-30 seconds and see if that reboots the phone.

  • Tethering issue with the T-Mobile Mytouch 3G and Macbook

    I am a very happy Mac user, I have been so for 10 years. I have a 17" 4G MacBook Pro. I am also a customer of T-Mobile, and I have a Mytouch 3G, which uses the Android operating system. It's OS was just recently upgraded to Froyo, which now allows the phone to be tethered to your laptop so you can have a mobile hotspot.
    I was very happy about this feature, until I found out that tethering only works with Windows and Linux only.
    I went to the official T-Mobile forums and posted this:
    "The tethering option in Froyo needs to be available for Mac.
    As a Mac user, I find it very unfair that tethering is only available for Windows and Linux. As a photographer and graphic designer, I use a Macbook Pro that I take everywhere with me. If I can't get a good Wi-FI connection, I'm in trouble.
    I would hope that this situation is corrected soon, so everyone using a MT3G and Froyo can benefit from this feature. The world does not run on Windows alone."
    This is the response I was given by someone:
    "Well, you're barking up the wrong tree in this case. Complain to Apple and tell them to support Remote NDIS (RNDIS) like Windows and Linux do. It's a published standard in USB Communication Device Class, Version 1.1
    It's not the phone's or Google's fault that Apple has decided not to support the standard."
    Now, I don't really understand what any of this means. Could some please explain it so I can understand it? Also, Is this person correct, or is there any other way to tether the phone?

    Cumbersome??? ......you are very kind. Unfortunately I have not found anything but Studio that will do it.
    david

  • Issues with my Samsung

    Skype worked one time and now I miss calls, can't make calls or the calls last only a few seconds. What's the fix for this?

    You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
    I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.

  • My iPhone5 won't reconnect to my Subaru Forester Bluetooth radio. I have to go and delete the iphone from the radio and pair the phone and radio everytime. I never had this issue with my samsung

    I have a 2012 Subaru Forester and when I get in, my iPhone5 won't connect to my Bluetooth radio.  I have my Bluetooth radio knows about the phone, but the iPhone5 just won't connect. I have to go and delete the iPhone5 from the radio memory and then pair the radio & the iPhone5 again, then it connects and works great until I shut off the car. Then when I get back in or restart the car I have to go through this all over again. Anybody got any ideas? It is driving me crazy and i just got my iPhone5 a week ago. Now I am not a real iPhone Savvy user, so it may just be something I have not set properly. So can some one Help? Please!

    My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
    It did my head in for months.
    Thanks guys, because of you, I worked this out.  My Forester needed the "handsfree" setup, not just a Bluetooth pairing.  Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
    But only to initiate the hansfree component.
    From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup.  Because I'd done this originally, my old phone was in here.  Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
    Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone.  Now it auto connects everytime I get in the car
    Woohoo.
    Johnny

  • Droid Razr 4G Mobile Hotspot Issues with PS3

    I am hoping someone else had this issue and has been able to resolve.  I just got a Droid Razr this week, and I have the 4G mobile hotspot feature.  I am trying to replace my slow DSL line at home, and most things in my house have tested fine (Internet access, etc.).  However, my PS3 seems to have some issues, particularly with online gaming and testing the network connection.  The game I am testing now is COD MW3.  I thought maybe something like IP ports were blocked on the phone or 4G network, but searching online seems to indicate that isn't an issue.  If I reconnect my PS3 back to the DSL, online gaming and network tests work just fine.  Move it back to 4G and the game won't connect and the network tests don't complete.  
    I don't see any features on the phone that would indicate that you can modify any firewall like settings.  Anyone else experience similar issues?  Thanks in advance!

    I'm having the same issue with my Samsung 4g hotspot as well.  I can get onto the PSN, download game updates just fine, but when I'm in a MW3 lobby, it just sits there and eventually times out and a XMB message displays that i've been disconnect from the wireless access point.  Anyone have any ideas? 

  • Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.

    Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do I fix this?

    Hi LyfsGD!
    Here is an article that can help you troubleshoot this issue with the Apple Mobile Device Service:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Issues with Samsung Galaxy Tab S after installing 5.0.2

    Hi all,  After updating to the latest firmware I have had nothing but issues leading to the tablet now being useless. Power drains in seconds dropping from 53% to 2% in 3 minutes and loosing mobile connection every few minutes. The tablet turns itself off constantly and it is completely useless.  I have done the usual, deleted cche partitions's, soft reset, complete reset, deleted all data on SD card inserted and checked SIM in my phone to make sure it works. Anyone else had these issues or  other, this is redicoulus. After waiting months for the same update for my Galaxy Note 3 I am staring to have other issues with this also and this is very worrying.  many thanks  

    The update is FOTA. Your device will notify u when its your turn. They send them out in batches.
    Now you can take it to a best buy to the Samsung experience center and have them flash it. Also a Att device support center can do it.

  • IMessage issues on contacts associated with two different mobile numbers

    Hello together,
    currently i am facing the following issue:
    I have a contact "Max Mustermann" associated with to different mobile numbers. Number 1 is a number belonging to his business mobile phone which is an iPhone. Number 2 belongs to his private Android device.
    Since I updated to iOS 7.0.2 my iPhones sends every message (new message, answers) to the iPhone, regadless if he sends me a text message from his Android device.  During my throubleshooting I tried to delete his business number from contacts, deleted every mail adress associated with his contact, recreate the contact with the same name and just the private number. As for now I completely deleted his contact on my iPhone and tried to send the text message directly to the mobile number of his Android device. But still the same: Message is send as iMessage to his business mobile phone...
    Anybody faced this issue before and can me help with his?
    Regards,
    Tim

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

  • Hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    kaylsk1 wrote:
    udated and its on 10.6.8 yet still no change
    Your signature in 1st post was 10.8.2.
    You went backwards?
    Did you reformat and reinstall when you first purchased it?
    If not I HIGHLY recommend you do that before you do anything else.

Maybe you are looking for