Play animation that is happening inside symbol_2 by clicking on symbol_1 which is situated in stage

So basically i want exactly what the title says.I have the stage and two symbols...each symbols contain their own elements.Symbol_1 has some static elements which will act as buttons and Symbol_2 has some images that are animated...at the beginning of each animation of every element i've put a label(such as image1_start,image2_start etc).And I want that when i click on one of the buttons whic are sittuated in Symbol_1 to start an animation from a specific label that is happening inside Symbol_2.How do i do that?...If they are all in the same timeline it's simple by using the sym.play("image1_start") command but that's not really what i am looking for.I hope I was specific enough.THANK YOU IN ADVANCE!
P.S.Mostly it's about how can I make two different timelines to communicate properly.

// insert code to be run when the composition is fully loaded here
sym.getSymbol('symbol_1').$('btn1').click(function(){
          sym.getSymbol('symbol_2').play('image1_start');
sym.getSymbol('symbol_1').$('btn2').click(function(){
          sym.getSymbol('symbol_2').play('image2_start');
sym.getSymbol('symbol_1').$('btn3').click(function(){
          sym.getSymbol('symbol_2').play('image3_start');
here is the sample:
https://www.box.com/s/dcpe4xvdu6h9391gy5yd

Similar Messages

My laptop has been stolen (the Baterds) now is wndows protected by password but if they get inside and use firefox with sync the can come a long way. how can i stop that from happening. can I block that laptop from syncing? thx Rick

my laptop has been stolen (the Batserds) now is windows protected by password but if they get inside and use firefox with sync they could come a long way. How can i stop that from happening. Can I block that laptop from syncing? thx Rick

* https://support.mozilla.com/kb/ive-lost-my-phone-how-do-i-deactivate-sync

Playing animations in reverse

Hi there,
I have a script that i use to run animations in my models, but i would also like to be able to play them in reverse as well.
For example, i have a series of buttons that i use to trigger parts of my animation. Button 1 runs 0-2 sec, Button 2 runs 2-4 sec and button 3 runs 4-6 seconds. Now if i decide to press my buttons in reverse order, i'd like to see my animation running in reverse, such that button 2 will now play 6-4 sec and button 1 will play 4-2 seconds.
I hope this all makes sense.
Has anyone come across this before?
Does anyone have any scripts that they're willing to share?
I can provide the script that i'm currently using if this will help anyone with this problem.
Cheers,
George

George,
Here's a script that will play your animation in reverse. To play in reverse successfully, you should set the default "Animation Style" to 'none' in the 3D properties dialog. Otherwise, the C++ animation routine will collide with the Javascript engine. (You can imagine how that might happen!).
Here's the script for reverse:
//=======================================
//get the first animation in the scene and create control vars
firstAnimation = scene.animations.getByIndex(0);
firstAnimation.speed = 3;
firstAnimation.oneFrame = 1 / firstAnimation.framesPerSecond;
scene.activateAnimation(firstAnimation);
//run the animation using a TimeEventHandler()=================
myTimer = new TimeEventHandler();
myTimer.onEvent = function(event)
firstAnimation.currentTime -= firstAnimation.oneFrame * (firstAnimation.speed * 0.1);
if (firstAnimation.currentTime <= firstAnimation.startTime)
firstAnimation.currentTime = firstAnimation.endTime;
scene.update();
runtime.refresh();
runtime.addEventHandler(myTimer);
//=======================================

My loop browser is playing loops that arent on the Hard drive!??!???!

I have 60's shuffle drummer 01 02 03 etc that i threw out a long time ago. I just repaired perms, repaired disk. Now
i have these loops in the browser and they play
but i do not ( ive looked everywhere ) have them on my computer's HD. Isnt it absolute that what is played in the browser must be on the HD somewhere?
This is the strangest thing that has happened?
any clues?
any???

thanks so much... for your time and expertise.
1-I want to organize the loop browser so that if i want lets say only electric guitar solo loops or just drum fill loops I could bring all those up in the browser where it says show all ( in the very left column) and they would appear in the same amount ( minus those in 3/4 or 6/8) as they are in the subfolder in the Apple loops HD folder. Thats the first concern i have.
2-i am not really really sure that every loop i have in my HD (lib>audio>apple loops folder is actually listed in the loop browser. I bought several different third party loops and some have odd names and so forth all in all i must have 6 thousand loops or more...Id like to make sure that they are all indexed properly. Id like to start from scratch. So as not to get duplicate problems etc etc. I would feed the route Hard drive initially free of any loops from an external HD with the loops and re drag the loops in their respective folders onto the HD and then the browser and reindex them so that im sure im doing it right.
thats the goal. I would ofcourse trash the index document before i do this.
I understand with prefs unchecked (no filter) the only loops that wont be showing will be those with different time signatures.
Now, in my newly made HD loop folder ill have subfolders with loops for electric guitars, acoustic guitars, drum kits, drum fills, etc. etc
What im asking therefore is if i have subfolders with more specific loops in them is it just a matter of dragging each sub folder over the browser and when i go to the browser to search them, I would simply have to click on the very left column where it gives you the options show all etc..
and i should see the loops in each of these subfolders (minus the different time signature loops) as they are on the Hard Drive?
i found that Jam Pack 4 orchestral is only loadable if you do it in small amounts. It will not take the whole folder and index. ( thats my experience ).
So are these feats possible and can i do them the way ive stated it so far?
now the catch and the problem im having here is that the loops have been assigned different instruments genres that conflict with what i would like. I am not going to go in and change all of them to suit me in APPLE SOUND UTILITY.
i just want to know they are all indexed and that i can grab them with the above method. do let me know
i thank you so much.
gl

ITunes Match only plays songs that were uploaded to the Cloud

I posted this once before back a couple of months ago and never did get it working.
I have an iPhone 4s and I purchased iTunes match about a year ago. My library was about 5,000 songs. I was able to use iTunes Match flawlessly on cellular or WiFi and play any of my music. Then I upgraded to iOS7, big mistake. Ever since that upgrade back in September, when I am on cellular I can only play music that was not matched but uploaded to the cloud. For example, when in my car I can play a live Phish show that I added to iTunes and that was uploaded to the cloud when I updated iTunes Match from my laptop, but I can't play the Rolling Stones Sticky Fingers because it was matched and not uploaded.
I have reset the phone to factory and manullay installed my apps again. I have turned off match and reset my phone, crossed my fingers, etc...
What happens when I try to play a "matched album" on cellular, it acts like it is going to play but sits at 0:00 for about 20 seconds and then skips ahead and attempts to play the next track. Everything plays fine on WiFi.
Has anyone lese had this issue and if so any suggesttions? I am so frustrated with the whole experience right now. I just went to the support page to submit a ticket to Apple and apparently I don't have support anymore because I have the phone for a year. I don't what to do.

Another oddity I just discovered is that if I turn on wifi hotspot on my phone and connect my iMac to my phone's 3G service then iTunes on my iMac will stream music just fine from iTunes match (yes, the music was only in the cloud, not on my drive).
I've tried everything I can think of to get iTunes Match to play tracks over cellular.. including totally deauthorizing all my computers and devices, totally removing all tracks my itunes match in the cloud and re-scanning/uploading everything. Purchased new tracks, and they won't play unless they are downloaded. But they will play just fine when previeing them for purchase in iTunes app.

New animations that are made responsive within edge no longer working in squarespace

i have posted numerous edge files to squarespace in the past with no problems. recently though, for whatever reason, animations that have been made responsive in edge no longer work as expected and require some hacky workarounds in order to display properly. when you inspect the code for the page, the .js files and all the css and images are included as per usual, but the animation never starts. when i include some text in the #Stage div the text will appear on the page for a fraction of a second (styled as it should with our web font and size, etc.), then the styles are stripped, then the text will vanish. all of this happens in less than a second.
this made me think it's some sort of .js or .css file that gets loaded in after the animation that's causing it to not work properly, but i can't figure out what it might be.
i was just curious if anyone else was having these problems, and might know of a solution. my old edge files that are still on ss are working fine. if i take old edge files and create a new article they still work. it is only newly saved edge files that are made responsive that no longer work correctly. edge animations that don't include responsive aspects work as expected.
i'm not sure if this is an edge or a squarespace problem, but i figured i'd ask here as well.
thanks for any help!

Oskar,
I appreciate your help on this. I am getting different results. First, I am getting some additional problems that I've never had with earlier versions of Excel (as I said, I'm running Excel 2013 now).
I have a workbook with several worksheets. With one of the sheets, any attempt to print or print preview fails. I do File > Print, and I see that the selected printer is my HP LaserJet M2727. This is the default printer. There is
no print preview, except for a small box that contains the words "Show Print Preview." When I click on that the small box is replaced with the words "Print preview is not available." On the left hand side, where the printer is identified, there
is a green check mark on the printer icon and below this is the link that states "Printer Properties." If I click on Printer Properties the green check mark changes to a red X and the word Ready is replaced with "Unable to Connect."
Without changing anything, other than selecting a different sheet within the same workbook, I get very different results and they do not match your results. Again I do a File Print and again I click in the small box that says "Show Print Preview."
This time a preview appears with NO message box. However, if I customize the Quick Access Toolbar by adding the "Print Preview Full Screen" button and then click this button without first clicking on File, then the message box appears.
So, are you getting the message box by clicking on File > Print, or are you clicking on the "Print Preview Full Screen" quick access toolbar button?
Thanks.

Videos on iPhoto no longer play. All was fine as I was organizing photos, but suddenly no more videos would play. What has happened?

Videos on iPhoto no longer play. All was fine as I was organizing photos, but suddenly no more videos would play. What has happened?

Something went wrong. Now for a useful answer...
Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

How do you troubleshoot Flash animations that wont load?

I've recently switched to Safari 3.1 from Firefox and am finding occasional pages with flash animations that wont play
(currently trying to get to "Product tour" on this page: http://www.logitech.com/index.cfm/remotes/universal_remotes/devices/3898&cl=us,e n )
I just get a blank frame. I've confirmed I have the latest Adobe Flash plugin installed (9,0,115,0)
Just curious if there is anything to do, or if this is just a funky, Safari-unfriendly page.
Thanks.

Same result here.
if this is just a funky, Safari-unfriendly page
Probably! But two things:
It seems to be their Javascript that doesn't work.
Secondly (may be worth trying):
Some Leopard users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

Can't watch video and play games that require flash player

I'm using windows7 family premium version
internet explorer 10 last version 10.0.5
exploitation system 64 bytes
flash player verson 11..700.202 the latest one
So as i say can't watch video and play games that require flash player, they keep asking me to install flashplayer... i did everything i read in the forums, unistall it, clean the memory, reinstall it, disabe active x etc... but still have the problem.
More specific about my problem is that: let's say that i'm trying to look at you tutorial video under thi forum Re: How do I fix Windows permission problems with Flash Player? i'm just seeing a black screen. So I'm able to guess where is the play button so when i push on that place, i can hear the sound of that video. Second step guessing where is the enlarge button, and when the screen is enlarged, magic i can see and hear the video.... So you figure that it's impossible to use my computer like that and guess right all the time, so....
Second fact, it seems that bug happened after an update (windows or explorer) and i even talk with a microsott tech who was not able to resolve it... But if i'm undoning the update and go back to a prior image, i have no problems with flash player anymore... it' been moths that i'm delaying my updates cause i cannot find any solutions.... So Please please please, help me .... don't know what's the problem is and i'm not a pro, don't know what to do. (Excuse my english it's my second language)
Thank you

The first thing I'd try is updating your video driver.
Windows: how do I update the device driver for my video/display adapter?
If you still have problems and since you're using Windows 7 x64, please check to see if you have the following Windows update installed:
KB2670838 – Platform Update for Windows 7 x64
If so, please uninstall it and try Flash Player out again.

Click to play animation

Hi,
I'm a novice in Director 3D and in Lingo in general. I'm not
trying to
do anything too complicated. Am here to ask for help doing
the
following:
I have created a 3D model in Max with various things that
animate. The
user can click on one model and it will animate, then
another, and it
will animate. This is easily done with the Play Animation 3D
Action
behavior. What I want is once you've clicked all of the
models, another
animation plays. So, how do I go about this?
My animation is just keyframed made in Max.
Thanks.
Stu.

stu wrote:
> I've managed to put a global variable into the Play
Animation behavior to
> count the animations played. But, I'm really just
counting the animations
> activated. I need a way to test if an animation has
finished playing. How
> do I do that?
Hi Stu,
When an animation starts playing the 'currentTime' property
ticks over and
then goes back to 0 when the motion is complete. If you have
recorded when
the animation starts, you just need to check when it's
finished. You could
have something like the following (in a script after you know
the animation
has been started):
if
member("3DcastName").model("modelName").keyframePlayer.currentTime
= 0
then go to "animComplete"
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.deansdirectortutorials.com/
http://www.multimediacreative.com.au
email: [email protected]

TS1362 just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Does the iPhone play animated GIFs?

Hi,
Does the iPhone play animated GIFs? Sorry for asking such a basic question but I can't seem to find the answer on the web or within this forum.
Also how do you implement it into your code? Do you need to use a UIWebView or can you just declare it like a regular png or jpg (e.g. UIImage *image = [[UIImage imageNamed:@"photo.gif"])
Thanks for any help.

you can play gif in webView ,just the same way you load a jpeg or png..
NSString *path = [[NSBundle mainBundle] pathForResource:@"santa" ofType:@"gif"];
NSURL *url = [NSURL fileURLWithPath:path isDirectory:NO];
/* Load the request. */
[myWebView loadRequest:[NSURLRequest requestWithURL:url]];
the gif that is locally saved will be loaded.

Swf playing layers that are dimmed out.

I have been trying to save out an animation in swf. However for some reason it's playing animations layers that been dimmed out( Which I didn't want to include in the save swf.)
I'm not sure what's going on. I just want the layer "Walk_forward" to animate in the swf and not both "Walk_forward" layer and "Walk_in_place" I could just delete the one layer, but I would like to save them in the same file.
Any ideas? Thanks

Right click on the title area of the layer you do not want in the animation and choose "Guide" It will still appear on the timeline for you to be able to use as a guide/reference, but will not appear in the published file.

What happens inside ...... when fired Index Reorganize

Hi all,
what happens inside ...... when fired Index Reorganize
Thanks
vijay

Logical scan fragmentation is removed (where possible). This can improve performance of certain queries, because it reduces the amount of big disk head movements need to go through all the pages.
In addition to that, it brings the amount of unused space in line with the original fill factor of the index. If you haven't specified any fill factor when the index was first created, then all unused space will be removed (where possible). It does this
by joining the rows of multiple pages onto fewer pages and releasing the empty pages. This can improve performance of many queries, since fewer I/O and less memory is now needed to access the same amount of row data.
When the command runs, it will lock just one or a few pages at a time. This way, most blocking is avoided, and any blocking that does occur will be short lived.
This also means that the reorganization occurs inline, within the pages and extents that are already allocated for the specific index. This is one of the big differences with Reindexing, where new pages (and extents) are allocated.
Gert-Jan

Play animation as a handle is being dragged

Hello everyone, I created a simple animation that fades some item in and fades some out, the thing is. I want this animation to play only when this handle is being dragged.
ex: as a user drags a item from the left side of the screen to the right the animation will play in the other items.
thanks for your help.

Hi there, there are a few threads in the forum that may help you out:
http://forums.adobe.com/message/5055925
http://forums.adobe.com/message/4913364

Play animation that is happening inside symbol_2 by clicking on symbol_1 which is situated in stage

Similar Messages

Maybe you are looking for