Player Installation with Multiple WinXP Users

It seems that normally, if you install the player ActiveX
control in IE7 on XP with a Windows administrator account, then the
player is available to Windows limited user accounts on the same
computer.
However I have one location where even after installing using
an administrator Windows account, other limited user accounts on
the same box want to install the player again.
Is there a checklist of things to look for that could be
causing this?

>I do have an installer that uses the registry key to
direct the xtras to
>the
> {All Users} profile instead of an individual one.
However isn't the
> actual
> ActiveX control the awswax.ocx located in the
Windows\System32 folder? As
> long
> as the .ocx is installed and registered, isn't the
download of all other
> componenets done silently, and not require administrator
access?
Seems about right - but the user needs to have access to the
folder where
the rest of the files go. I guess I'm speculating that your
specific profile
is not getting access either to that location - which should
be in the
profile's own 'profile' folder in Documents and settings.
That's where the
registry key might help.
Here's the full technote
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19348&sliceId=2
Steve

Similar Messages

  • ITunes setup on a NAS with multiple windows users - how?

    iTunes setup on a NAS with multiple windows users?
    I am very confused on what is the best way to handle this setup for my friends family.  Any help would be appreciated.  Sorry in advance as I know this is a long winded post - I have a feeling this will help others faced with the same issues or questions.
    CURRENT SETUP
    I have three new Windows 7 machines networked (two desktops and one laptop) that have four users on each - as busy family with children who need the computers for homework, projects, games, etc...  The goal of this setup is that any user can log onto any computer and have there documents available to them no matter computer was free to use.  I set this up using the library function in Windows 7 and seems to work pretty well.
    I have put a Buffalo Linkstation NAS on the system as well.  This was going to serve two purposes 1)  run some backup software to protect the computers and 2) consolidate the iTunes content in one place for all users.  There is also an iPad in the home that I should would be better served by accessing the content on the NAS without requiring any of the computers being on.  Dave is thinking about getting some other playback devices like Apple TV so thought a NAS would be a good way to go.
    CURRENT ITUNES SETUP - I have created a new iTunes library on the NAS by holding the SHIFT button down while starting iTunes and pointed to that folder on a Share on the NAS.  There was no music on the system at the time as we are planning to copy this over from an OLD machine that is now not being used.  I have also authorized all the computers and turned on the home sharing feature (although I am not sure what good that does).
    This “shift” button trick seesm to also point the default directory there without point to it in the advanced setup tab of iTunes.
    I then synced one of the iPods with purchased content on it and synced that to the library after asking me to do so before an update.  All the content showed up in the library and was playable - awesome.
    I then logged into each user on each machine (yikes) and installed iTunes  and used the “shift” trick to connect each users iTunes to the database on the NAS.  Everything seems to work - but I have not tested it thoroughly.
    SUMMARY
    3 new Windwos 7 networked machines
    4 identical users on each machine
    1 TB Buffalo linkstation
    iTunes setup with the folder on a SHARE
    all user’s itunes connected to the iTunes folder on the NAS
    all computers authorized with home sharing turned on.
    one iTunes user account signed in on each machine
    multiple iPods and one iPad in the system
    QUESTIONS/CONCERNS
    Is there a better way to do this on a NAS?
    Would home sharing be better in some way?
    I understand the NAS should show up under the shared section in iTunes - I assume that would mean that would mean each user has an iTunes library on their documents?
    I have read that there may be corruption issues if users on the different machines try to access iTunes at the same time.
    Will there be any issues syncing that various iPods with?
    Ugh - sorry for the long post and all the questions.  I am just trying to find the best way to do this.  I wish Apple would put out a best practices document for setups like this.  Thanks in advance.

    This is a user to user support forum. Your fellow users can offer solutions or workarounds based on their experience with the application. If you think it should work differently drop a line to iTunes Feedback.
    For reasons unknown Apple haven't chosen to allow iTunes to be suspended in one profile and active in another. My recollection is that this applies even if each profile has a different library, although it is some time since I've committed a personal test.
    I'm not sure why my suggestion make less sense that your current approach?. As I understand it currently everybody is either signed into their own account when they can do something other than work with iTunes, or they sign into the special iTunes account where they can't access any of their other stuff. You don't have to disable fast user switching. Follow exactly the same steps, but make sure everyone closes iTunes before turning the computer over to another user. Disabling fast user switching helps to enforce that action.
    tt2

  • TS4020 I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security

  • AIR application installer with multiple languages

    How can I distribute my AIR desktop app for Windows and OS X, with multiple languages in the installer? My app itself is completely localized, but I want the installer to be localized too. The issue is, though, that I need it to be localized into Hebrew, which isn't one of the built-in AIR languages. How can I create a custom installer with Hebrew included?
    Thank you!

    Hi,
    Would it be possible to get the URL to the page that has your AIR badge installer (or the html if it's not publicly viewable)?  We'll probably also need further info on the system that's failing, if possible could you post the installer log and check to see if the following file exists:
    Win 7:
    C:\Users\username\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\airappinstaller.exe
    Mac
    /Users/username/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/airappinstaller/airappinstaller
    Please feel free to contact me at [email protected] if necessary.
    Thanks,
    Chris

  • Installation with multiple as and one DB (no cluster)

    Hi, I'm trying to setup a production environment with three Jboss AS non-clustered and one MSSQL database. I've made the installation on each AS and for each AS I've executed all the steps of the Configuration Manager.
    Now I have some problems about the three AS line up; when I modify an user password on one AS the other don't see this modification. Moreover, some common features works such as the policy definition; for example, when I create a policy on the first AS the others can see this policy.
    Can you help me?
    Thanks
    Fabio

    Multiple, non-clustered LiveCycle instances against a single database is neither tested, nor supported. For each instance, you'd need a separate database (with multiple sets of tables, views and sequences). All changes have to be repeated for every instance you have.
    This technical whitepaper from Adobe will provide more details:
    http://www.adobe.com/devnet/livecycle/pdfs/lc_platchoice_wp_ue.pdf
    What you are attempting is a deployment architecture the author of this whitepaper calls "Server Load Balancing" (see page 11).
    You might be better off clustering the three instances.

  • VM installation with multiple .iso files

    Hello All:
    I have a windows image which spread across 3 iso files. So I started to install the VM from the first iso files, then it got to a point where it ask me for the 2nd iso file.
    This is where I am stuck. Does anyone successfully install a VM with multiple iso files?
    What is the correct procedure to do this installation?
    thanks,
    Peter
    Edited by: user3229804 on Jun 21, 2011 11:45 AM

    First thing, have you already imported (into VM Manager) the other CD/DVD's into separate .iso files?
    Then during installation, from open VNC Console window, make sure that you resize the window so that the lower portion is visible. There is a drop down button that will let you select a different .iso file, and a button next to it that says something like "Change Disk". This effectively lats you swap the DVD for the installation process to continue.
    Screen shots would be helpful here, but the key is resizing the VNC Console window, because duringmy install, the default window size cropped these buttons out.
    Hope this helps.

  • SAP Installation with DB2/LINEX  ,User creation error

    Dear All,
       I have started sap installation with DB2/lLinex at the moment i am struggling in step 2:Creating user for sap system
    Error:Invalid password DIAGNOSIS .The password you specified for user db2ec1 is wrong .(CJS -20004 :Invalid password DIAGNOSIS)
    Solution:Enter the correct password .
    Please advice how to correct the issue ..
    Thanks,
    Rajmohan .s

    Hi Dinesh Sadasivan,
    While doing the sap installation please avoid using special character in password. Use the simple password like password123.
    One more thing is that also cross check the password policy from your os admin, like complexity lenth etc. If its there then tell him to temporary disable the policy.
    Regards,
    Kamal

  • Shuffle - can it be used with multiple winXP computers???

    Can my shuffle be used with multiple computers without losing songs that are on one library and not the other?
    I keep seeing references to "manage files manually" but I don't see that option for my shuffle settings. I just lost my songs when I plugged it in to my computer at work...
    Thanks for any help.

    Dave's already got you covered.
    just a thought, though. if you're also got a standard ipod (or some other way of keeping the two different libraries in alignment), you may be able to set up something along the lines that Arend describes in this thread:
    http://discussions.apple.com/thread.jspa?messageID=2161102#2161102
    love, b

  • Sharing a project with multiple RH7 users

    We have a project that "we" shared by remoting into a server
    that had one image of RH 5.
    We've got multiple RH7 licenses (multiple installs on
    separate machines). We cannot get into the same project. In fact, I
    cannot even open a project and import that one.
    It was decided NOT to purchase the RH Sever with RH 7 because
    VSS would do the versioning for us.
    We haven't set up VSS yet, so we aren't creating individual
    images of the project files (which is how it worked in RH 5, with
    inline versioning). I'm surprised that we cannot individually open
    a project (even without others using it), nor can I even IMPORT the
    files from that project to a new project. What am I missing?
    The error is "Open project was cancelled or the application
    was unable to load dabase for ....<fully qualified path to a
    .cpd file>
    I've read numerous KB articles and have deleted, renamed,
    compressed the .cpd file to no avail. I've tried opening the .hhp
    file (which recreates a .cpd file).
    Nonetheless, how are multiple users supposedto share in
    editing project files. If each of us must have separate images of
    the same topics...how do I "replicate" this in the testing phase
    (we're in the process of setting up a shared/versioning system, but
    don't have it yet. The only way we can get to the common project is
    to remote in to the hard drive and work from the local install of
    RH7.

    Hi annonnyma and welcome to our community
    We have never been able to have multiple users simultaneously
    accessing the same project by simply placing it on a server. The
    way it works with a source control system is by having it stored
    centrally on the server. Then the source control system handles
    checking in and checking out by maintaining a "Working folder" on
    your LOCAL hard drive. The end result is that each help author
    actually has a full copy of the help system source files on the
    server. As they work on different bits, they are actually working
    locally off their C drive. At no point do you ever directly access
    and edit the files on the server. The source control system handles
    copying them back and forth.
    RoboHelp Server should not be needed for source control if
    you are using VSS.
    So copy the project locally, then possibly rebuild the .CPD
    and you should be good to go.
    Cheers... Rick

  • How to use one I-tunes library with multiple windows users (family) on 1 pc

    On our family pc we log in with different accounts. We want to use I-Tunes but all have the same library. I tried to create a library not in the users directory, but in the All Users folder that is accessible for everyone. However, when I import the music in the library for one user and set the same location for another user, I-tunes does not recognize the library. So everyone has to create it's own library.
    What are the best practices to overcome this?

    Keep in mind that what you have done now is you have multiple iTunes libraries accessing the same media folder. Meaning, that each account can have their own ratings, playlists, etc. but more importantly, each account does NOT know what the other account does, so if your daughter adds a CD to her account, it will go into the shared folder, but it will NOT automatically go into your wife's iTunes library. She would have to add it manually. Likewise, if one account deletes music from their library and tells iTunes to remove it to the trash, the other accounts will not know and iTunes will still try to access the file from the shared location even though the file is now trashed.
    Each account has their own database files (.itl files in the iTunes folder) which stores this stuff.
    If you want to have everyone use the exact same library which means the same ratings, playlists, etc. then you need to move the database files into that same location and set each iTunes account to read the same data.
    How to open an alternate iTunes Library file or create a new one
    http://docs.info.apple.com/article.html?artnum=304447
    Patrick

  • Developing UPK Modules with multiple development users...

    HI and thanks for reading my post, we are in the early pre-implementation stages and I am tasked with learning UP Developer and so far it seems like a great tool, however I feel like something basic is missing and was wondering if I have just missed something?
    The issue: we want to save the UPK module to a network drive and have multiple users able to access and edit it while in testing and development.
    As far as I can see UPK stores the working file in the program directory on the local drive…
    Has anyone else out there developed their training in a similar method?

    Hi Anshu,
    1) refer SAPUI5 SDK - Demo Kit on deployment scenarios.
    2) as you are not going to use ui5 ABAP repository team provider, I think you can use CVS version control system. refer About source code version control with CVS
    Regards,
    Chandra

  • Sharing iPhoto and iTunes with multiple local users

    My wife and I share the Intel iMac and we want to share both the iTunes and iPhoto libraries...
    Can I just place them in the Users/Shared folder, do an Option (first time) launch from each account to identify it's location and can we both access them from there, or is there more to it...
    We also want to be able to import and download photos/music from either account into the same library....
    thanks

    Shawn:
    Here are some suggested methods to share:
    iPhoto: Sharing libraries among multiple users
    http://ad.hominem.org/log/2005/07/acl.php
    http://discussions.apple.com/thread.jspa?messageID=2151309&#2151309 (see Lori's post and links)
    http://discussions.apple.com/thread.jspa?threadID=579542&tstart=0
    http://www.captnswing.net/2004/03/20/shareiphotolibrary.html
    And if you'd like to have each user have a total independent library while sharing the same source files see Tutorial #3.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • A lot of hang-ups and disconnected WRT120N in all installations with multiples Wireless Routers

    i'm so tired, i have a lot of installations (school, university,..) that have various WRT120N (4,6,8,12,...) all routers have the latest (no is very new) firmware 1.0.0.4 build2, and in a installation all routers have the same SSID and diferents channel.
    Every day all routers hang-up and the user need to stop and start every router.When a router hang-up this can't receive any ping, telnet,web,... across the wired LAN (ping timeout) but all links seem correctly and SSID is published.
    I try another brand in this scenario and work fine.
    I try to chat with linksys support but is'nt possible, nobody know my problem ?

    Sorry I missed the Access Points description - I'm wondering  - because there are so many routers - if there may be an issue with the channels and wireless overlap. One IEEE 802.11 "N" can typically communicate within a radius of 70m indoors 250m outdoors. However, the actual range of communication can vary significantly, depending on such variables as indoor or outdoor placement, height above ground, nearby obstructions, other electronic devices that might actively interfere with the signal by broadcasting on the same frequency, type of antenna, the current weather, operating radio frequency, and the power output of devices. I'm thinking that you will have to separate the channels on these ... I don't know for sure why the other routers worked - maybe only one was changed at a time instead of all the routers in the whole network ... at any rate if you have overlap on frequencies there may be something there ... especially when using these as AP's. I believe this router has the ability to change frequencies in the the advanced wireless settings under the wireless tab.
    Just shooting from the hip here.
    Bill

  • Itunes/Ipod with multiple Vista users - Problem

    To set the stage - new Vista PC, shared by the family - so I set up individual ID's (thought that would prevent my kids from corrupting our stuff). Oh, and thought Vista was compatible.........
    On the admin account, which is where the iTunes Library is linked, it sees my iPod but says it is in the process of "recovery" - even after accomplishing the restore process - this message comes up right away. But, lo and behold, on my daughter's ID, the iPod is recognized sucessfully (and what is weird is that iTunes wasn't even installed on her account (i had to go through the Q&A process) but the iPod was seen just fine. I can sync the iPod to her library, but even after exiting nicely, and logging off her ID, when I go to mine (admin), I get the same message/problem.
    Any hints/help?

    if still does not solve try this
    . Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

  • Problems with Using Bluetooth speakers (a2dp) with multiple Windows users

    I have the bluetooth Loudspeakers (Yamaha NX B02)
    they are easily configurable in Toshiba's bluetooth stack everything works fine
    as long as I use my profile
    If only any other person would like to log on any other profile (Windows XP Home edition)
    the Bluetooth stack won't pair with the Yamaha Speaker
    I disconnect the speakers on my profile
    Speakers are in pairing mode - they are found on the list of devices to connect
    but they just won't connect,
    Once they were paired On "user1" profile on "Laptop1"
    the "user2" or any other on the same "laptop1" aparently has to buy a new set of speakers
    coz thouse standing right next to him are only to be used when logged as "user1"
    First of all I don't really see why the bluetooth stack holds different device list and different configuration for each user?
    Nonetheless - is there a way to somehow IMPORT device connection settings from my profile to any other
    Or maybe there is anything else I should do to be able to pair with my speakers no matter as whom I'm logged at the moment
    Thank You in advance
    And YES - the Yamaha set sounds great - I'm really pleased

    Hi
    Im not 100% sure if I have understood exactly you Bluetooth <-->speaker issue.
    According to your message, you cannot pair the BT speakers for the second time using profile2 if the speakers are already paired using the profile1. Am I right?
    Well, in my opinion there is nothing wrong because the speakers were already connected to the notebook using the BT. From my knowledge you cannot connect any BT device if its already connected using another profile.
    I think you should always disconnect the BT speakers using the profile1 if you dont use it. Then another user using profile2 would be able to connect the BT speakers.
    Best regards

Maybe you are looking for

  • T440s & Windows 7 in UEFI mode

    Hi,  I try to install Windows 7 on my T440s. However, I fail booting the USB stick with error code 0xc000000d ("An error occurred while attempting to read the boot configuration data"). I created the USB stick as described in the Forum here (http://f

  • After Schedule , Blank Report

    Hello Everybody , I add a variable to report , After scheduling the report , content,datas of the report are empty.But If I remove variable , after schedule , the report datas and contents are normal appearing.In both cases the report save to my comp

  • Buffer Flush

    So, I'm trying to play streaming video from Dlash Media Server. nc = new NetConnection(); nc.connect('rtmp://mysite/myapp'); ns = new NetStream(nc); var startBufferLength = 2; ns.setBufferTime(startBufferLength); // create and set sound object var sn

  • I have windows 8.1 and a grapnics pad and touch pen. pressure not working in PS CC

    I just bought a HomCom 10" 5080LPI Graphics Pade and Pen. Photoshop will not react to pen pressure. even after setting brush dynamics to pen pressure. Is there a patch or am I doing something wrong? All other functions of the pade seem to work fine,

  • How to make a short clip out of the original one ?

    Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that i