Please explain Sh.Text type i.e. BzWe, BzRe, RE-L

Hi All!
Can anyone explain Sh.Text type i.e. BzWe, BzRe, RE-L , and where are its setting

hi,
When you perform MIGO against PO WE is Generated
When you perform MIRO against PO then RE-L is Generated
When in your PO there is freight condition (say FRA1,FRB1) and you perform MIGO then BzWe is generated for the freight cost
When in your PO there is freight condition (say FRA1,FRB1) and you perform MIRO for delivery cost then BzRe is generated for the freight cost
Test a cycle with PO with freight ->perform MIGO-> MIRO ( both for material and freight )
You can see all these in your PO history
Edited by: redriver on Dec 2, 2011 12:52 PM

Similar Messages

Please explain the use of all the below movt types

Hi friends,
Can you Please explain the use of all the below movt types and how it is triggered.
901     GR Area for Production
902     GR Area External Rcpts
904     Returns
910     GI Area General
911     GI Area for Cost Center
912     GI Area Customer Order
913     GI Area - Fixed Assets
914     GI Area Production Orders
915     Fixed Bin Picking Area
916     Shipping Area Deliveries
917     Quality Assurance
920     Stock Transfers (Plant)
921     Stock Transfers (StLoc)
922     Posting Change Area
980     R/3 --> R/2 cumulative
998     Init.entry of stock bal.
999     Differences
Regards,
Balu R.V

Hi,
The below mentioned objects are interim storage types, not movement types.
Interim storage types are used as a sort of bridge between IM and WM.
MZ

Please explain me about customer exist program ZXRSRU01

Hi all,
I do not have enough knowledge to code for a customer exist.
please explain me for the below scenerio.
Dimensions                                                        Key figures
Business Partner (ZH11).
Created On Date (ZH22).
Status (ZH33).
Product (ZH88)
Product contains following
Product l1(zid1)
Product release description.
for this product release description for every new release we creating a variable.
and using this variable we are creating a restricted key figure as follows.
1.1 1.2 1.3. like this
My requirement is a query is already created for report to show bugs weekly releases.
I have to find out a way if the transaction contains a new version then i have to add new column in the output of the report (for example 1.4,1.5...)
as I do not have knowledge in ABAP please explain me how to solve this problem.
I do not have enough regarding Zxrsruo1.
if contains some predefined components.
Please explain for the predefined components.
IMPORTING
*"     VALUE(I_VNAM) LIKE RSZGLOBV-VNAM
*"     VALUE(I_VARTYP) LIKE RSZGLOBV-VARTYP
*"     VALUE(I_IOBJNM) LIKE RSZGLOBV-IOBJNM
*"     VALUE(I_S_COB_PRO) TYPE RSD_S_COB_PRO
*"     VALUE(I_S_RKB1D) TYPE RSR_S_RKB1D
*"     VALUE(I_PERIV) TYPE RRO01_S_RKB1F-PERIV
*"     VALUE(I_T_VAR_RANGE) TYPE RRS0_T_VAR_RANGE
*"     VALUE(I_STEP) TYPE I DEFAULT 0
*" EXPORTING
*"     VALUE(E_T_RANGE) TYPE RSR_T_RANGESID
*"     VALUE(E_MEEHT) LIKE RSZGLOBV-MEEHT
*"     VALUE(E_MEFAC) LIKE RSZGLOBV-MEFAC
*"     VALUE(E_WAERS) LIKE RSZGLOBV-WAERS
*"     VALUE(E_WHFAC) LIKE RSZGLOBV-WHFAC
*" CHANGING
*"     VALUE(C_S_CUSTOMER) TYPE RRO04_S_CUSTOMER OPTIONAL
Thanks,
James

Hi James,
You are talking about the include we use to write the user exit for variables in BW.
There are a lot of code examples that Edwin posted in the forum so you can use them to code yours.
A little bit of details on the paramaters in the include:
I-Vnam : The variable name to be calculated
i_t-Var_range: A table that contains all the system's variables data
i_step: The step for variable determination: 0,1,2 or 3.
i_step= 1: used to call default variables, called once per variable before the variable screen is displayed
istep= 2: used for those variables that are not ready for input, called after the variable screen is displayed
i_step=3 : Used for valiadation purposes, and called after isep=2
e_t_range: Is the table that the exit populated the varaible value to.contains the following important fileds:
   low: contains the value of the lower limit for intervals, for text variables it contains the text and for formula vatiables the calculated value.
   high: contains the upper limit for intervals
   sign: ususally I (Include), can be also E (Exclude)
   opt: usually EQ (Equal) or BT(Between)
See also:
https://websmp202.sap-ag.de/~sapdownload/011000358700002762582003E/HowToDeriveVariableValue.pdf
Hope it helps, if so please assign points,
Gili

Please explain what are the various procedures to find user-eixts

Hi,
Please explain what are the various procedures to find user-eixts ?
Ramana

Hi,
1. By executing this Program.
*& Report ZFIND_EXIT
REPORT ZFIND_EXIT.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
2. . Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
3. 1. in se11, goto table MODSAP
View table contents
in Type field, enter
'E' (for user exit / Function Exit)
OR 'S' (for screen exit)
4. Calling Customer- fucntion in Main Program
Thanks,
Anitha

Please explain the magic! (Question)

The ActionScript snippet below is from the BlaseDS chat sample app. Can someone please explain the magic that declares the chatMessage property of AsyncMessage.body (IMessage.body?) object? It's not in the docs anywhere so I'm guessing it is not built into AsyncMessage. And it's not defined in any of the sample app source files.
Coming from a strongly-typed development world, seeing a property that apparently has no declaration and is not explicitly instantiated does not pass the sniff-test.
Thanks.
<mx:Script>
<![CDATA[
   import mx.messaging.messages.AsyncMessage;
   import mx.messaging.messages.IMessage;
   private function send():void
    var message:IMessage = new AsyncMessage();
    message.body.chatMessage = msg.text;
    producer.send(message);
    msg.text = "";
   private function messageHandler(message:IMessage):void
    log.text += message.body.chatMessage + "\n";
]]>

Hold your nose, because that is the dynamic "feature" of Actionscript. Pretty much every class derives from Object (http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/Object.html) which is a dictionary of key-value property pairs. The {"chatMessage", msg.text as Object} pair is created upon assignment.
I am fairly new to Flex/AS, and while not having to declare types is convenient for quick and dirty coding, I try to avoid it in production code...I have been bitten by refactoring a class and not catching all the places where it was referenced dynamically. I'm sure there are comprehensive pro and con arguments out there.

To check with the text type of HTML.

Hi,
Good Morning,
In my project with jsp I developed itwo files ndex.jsp and response.jsp.
In the index.jsp I put one label,one text and one button.
So When I give some id in the text then click the button the response.jsp will be called.I know the query but i donot know how to check with the text of the HTML text field.
My HTML text type name is username.
my query:
Select * from StudentTable where studentcode='" + username.getText() + "'.
But I am not sure that my query is correct.I also have the error with this quere.
Will you please explain me to solve this?
Thank you so much.
Meena.

your query must be:
Select * from StudentTable where studentcode='" + request.getParameter("username")+ "';in this part:
request.getParameter("username")you are requesting for the value of your text field(username) from the previous jsp/html form

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show ip route | include 192.168.20.20
B        192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B        192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.20.226 24 msec 24 msec 24 msec
2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
3 192.168.20.205 [AS 8035] 224 msec 224 msec *

Please explain me how I can use Form feed(\f) and Carriage return(\r)

what is Form feed(\f) and Carriage return(\r)?
Please explain to me.
Thank you.

These control characters aren't used much these days except that if you example a Windows or MSDOS text file in a binary editor you'll find each line ends with "\r\n". However when reading or writing text through classes these carriage returns will be added and removed automatically so your program doesn't see them.
The controlls date back to teletype machines which operated rather like typewriters. Cariage return, as it's name implied, caused the print head to move back to the start of the line, line feed advanced a line (without, necessarilly, returning the carriage) and formfeed skipped to the next page.
Newline on these machines was always "return, linefeed" because executing the carriage return on these machine could take too long. The early machines had only a single character buffer so that they had to executed the characters as quickly as they arrived. So doing the linefeed after the carriage return gave the carriage more time to return. On some teletypes if you did "linefeed, return" then the first character of the new line would often be printed somewhere in the middle of the line.
This is the origin of the MSDOS/Windows end of line sequence.
Many printers will still respect formfeed if printing is direct. Some will take carriage return without linefeed to allow you to start again overprinting the same line.
However printing, these days, is seldom direct but done in bitmap form.

Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port.

Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port...
Someone told me just to remove the chip in clicking it to the trash can and voilá - it would be done. But as I did so, on the screen appeared a text which let me know, that that way had been the wrong one...
I should have clicked Finder plus something.... which I do not now remember but which was then not found behind the Finder.
So please would someone be so kind and tell me, where I can find explanations for the most simple functions. The manual I got does not include a clue.
Thank you!

First make sure that no application is using or has open any files on the disk. Then:
Click and drag the disk icon on the desktop to the trash. Wait for the system to recognize the action, and the icon should disappear from the desktop. It is then safe to remove the device.
Alternatively, you can secondary click on the disk icon, and then primary click "Eject (name of disk)". Wait for the icon to disappear off the desktop, and then it is safe to remove the drive.
Here is a detailed help document on the subject.
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1056.html

Hi any one please explain background job scheduling

Hi any one please explain background job scheduling . Good answer can be rewarded.
Thanks

Background jobs are pgms that are scheduled to be run in the Background without user interaction. So this can be done only for Type 1(executable) Program and not for Module-Pool Programs. Typically, a variant is defined and the pgm is run using the same.
The transaction code is sm36 -Define Background job. Using the Start Condition tab you can define when you want the job to run (specific time or if it has to follow after a particular job is done etc.,) Using the Step tab you can assign the pgm name and variant.
After the job is scheduled, you can check the status in sm37, along with the Job log and Spool.
For more info:
http://help.sap.com/saphelp_bw30b/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm

(ABAP) Code in Transformation--Please explain

I am getting a strange issue when used the below code
Target : Charasteristic,Data Type CHAR 5
Code:
DATA: years TYPE tfmatage,
months TYPE tfmatage.
*DATA: result TYPE c LENGTH 5.(Showing error if included:Result is already declared)
DATA: l_res TYPE p DECIMALS 2.
IF source-field-/bic/zdob IS INITIAL.
result = ''.
ELSE.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
i_date_from = source-field-/bic/zdob
i_date_to = sy-datum
i_flg_separate = 'X'
IMPORTING
e_months = months
e_years = years.
if months 0.
l_res = years + months / 100.
WRITE l_res TO RESULT.
else.
write years to RESULT.
ENDIF.
ENDIF.
WRITE / RESULT.
I am using the above code (given by Mat in SDN) as a field routine in Transformations...can any one please explain me in detail(step by step) whats it doing.
My requirment is to cal age of the employee in YY:MM format based on his DOB & SY datum.
FIMA_DAYS_AND_MONTHS_AND_YEARS give Years & Months between 2 dates
Please update me where i was doing wrong
If months = 0 the the result should be only years
Ex: if Months & Years of FM Output is 40Y,0M the i want only 40 to be updated insted of 40.00 so that the reason why i enhanced your code
But it is giving me strange output
For Output which got months it is being update correctly but
for output for which months are 0 it is being update as
If FM output is 40Y,0M
then the output being updated is ' 40' (2 spaces before 40)
In report i need to enter 2 spaces before 40 to retrive values of 40
Please correct error
Please ask if you need any info
Thanks

Hi,
Are you using transformations?
You should not use Result because Result field is a part of SAP generated code.
Exclude declaration of result and check the code.

After migrating to a new MBP, when saving or opening documents, I sometimes (but not always) get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

I recently migrated from a MBP with OS 10.6 to a MCB with OS 10.8. Some glitches are popping up. Here's the one on my mind at the moment:
When saving or opening documents, I get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

Since this is isolated to a single file, try exporting it to Interchange Format (.inx), then open and save the resulting file as a new InDesign file.
Since the problem occurs during export, that may not be possible. Another option to try would be to copy all elements, page by page, and "paste in place" into a new document the same size. If you used layers, be sure to enable "paste remembers layers" in the layers panel menu.
This kind of problem is often indicative of an underlying font issue. You said there are only three fonts, and you should verify that in Type > Find Font... Try replacing, at least temporarily the fonts in use with something else that you know to be reliable from other documents. You might want to do this before the other steps.
Peter

Please explain how the method CHECK_CHANGED_DATA works?

Hi experts,
Can any of you experts please explain how the method <b>CHECK_CHANGED_DATA</b>
of <b>CL_GUI_ALV_GRID</b> class works ?
Thanks in advance
regards,
Ashwin

DATA: l_valid TYPE c.
Data grid1 type ref to cl_gui_alv_grid.
CALL METHOD grid1->check_changed_data IMPORTING e_valid = l_valid.
This method checks if any data is changed on the grid if there any editable fields .
And updates the changed values
Message was edited by:
Chandrasekhar Jagarlamudi

EMET 5.1 crashes Outlook.exe, Photoshop.exe and Communicator.exe. Please explain why it would do that?

Hi,
EMET 5.1 is crashing/not opening these applications on two of our staff workstations (Both are Windows 7 x86): Outlook.exe, Photoshop.exe and Communicator.exe.
One computer, EMET crashes Communicator and Outlook. The other Computer, the EMET crashes Photoshop only.
Obviously, it works for everybody else. Can someone please explain to me why would EMET crash these apps if it works for the rest? Could it be that it found a possible threat/exploit to the machine?
How do I mitigate this problem?
Please advise. Below is a sample of the error.
Fault bucket 1031393421, type 17
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: communicator.exe
P2: 4.0.7577.4103
P3: 4fd6bebb
P4: EMET.DLL
P5: 5.0.0.0
P6: 545ffd74
P7: c0000005
P8: 00060310
P9:
P10:
Attached files:
C:\Users\xx\AppData\Local\Temp\WERD21D.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\xx\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_communicator.exe_7fba75e97ffde076db3fe52dd74029de19dc38_15d4e56e
Analysis symbol:
Rechecking for solution: 0
Report Id: 97ed67e2-de0a-11e4-822e-00125a5e8f35
Report Status: 0
Faulting application name: Photoshop.exe, version: 15.2.2.310, time stamp: 0x5480306d
Faulting module name: EMET.DLL, version: 5.0.0.0, time stamp: 0x545ffd74
Exception code: 0xc0000005
Fault offset: 0x0006714e
Faulting process id: 0x15c4
Faulting application start time: 0x01d0721e6fc383e7
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014 (32 Bit)\Photoshop.exe
Faulting module path: C:\WINDOWS\AppPatch\EMET.DLL
Report Id: b159a74a-de11-11e4-86b9-1cc1de578f37

One guess is that old Outlook plugins can sometimes cause issues with EMET. Try starting Outlook in safe mode, by holding down the CTRL key when starting Outlook to see if that helps, and look in Outlook in File / Options / Add-Ins menu item to see
the add-ons that are installed. Verify that the OS and apps have all the latest patches if you haven't, though you have probably already done that. If those don't work you could try unchecking the EMET application protection boxes for the
application that isn't working, one by one. Note that EMET 5.2 is out now so that might be something to try too.

Please explain me this elements in a script

hi,
can any one please explain how the co-ordinates are defined and explain this code in a simple way
FO791,105A0B,374,413CI13FRFN999FS
FO1015,626A0B,88,96CI13FRFN998FS
BY7,2.9FO104,126B3B,N,348,N,YFRFN997FS
FO483,169A0B,189,243CI13FRFN996FS
BY4,3.0FO941,1237BCR,176,N,Y,N,AFRFN995FS
FO847,1146A0B,85,86CI13FRFN994FS
IF &WA_ZZE46SERIAL-ZPRINT& = 'X'
FO778,1668A0B,43,56CI13FRFB256,0,0,LFN993^FS
ENDIF
FO715,88A0B,46,46CI13FR
FDCountry of destinationFS
FO61,1708A0B,42,61CI13FR
FDPackage noFS
FO934,704A0B,42,63CI13FR
FDDelivery noFS
    ^XZ
    ^XA
    ^XFZB_PAC-EMN.ZPL
    FN999FD&T005T-LAND1&^FS
    FN998FD&VBPLA-VBELN&^FS
    FN997FD&V_PACKAGE&^FS
    FN996FD&VEKP-EXIDV&^FS
    FN995FD&V_SERIAL_BAR&^FS
    FN994FD&V_SERIAL&^FS
   IF &WA_ZZE46SERIAL-ZPRINT& = 'X'
    FN993FD&V_TEXT&^FS
   ENDIF
    ^PQ1,0,1,N
    ^XZ
    ^FX End of job
even little information is of more help for me

You must be using Barone software and Zebra printer for printing barcode labels. This is the script generated using barone.
FO791,105A0B,374,413CI13FRFN999FS
FO1015,626A0B,88,96CI13FRFN998FS
BY7,2.9FO104,126B3B,N,348,N,YFRFN997FS
FO483,169A0B,189,243CI13FRFN996FS
BY4,3.0FO941,1237BCR,176,N,Y,N,AFRFN995FS
FO847,1146A0B,85,86CI13FRFN994FS
IF &WA_ZZE46SERIAL-ZPRINT& = 'X'
FO778,1668A0B,43,56CI13FRFB256,0,0,LFN993^FS
ENDIF
FO715,88A0B,46,46CI13FR
FDCountry of destinationFS
FO61,1708A0B,42,61CI13FR
FDPackage noFS
FO934,704A0B,42,63CI13FR
FDDelivery noFS
The first part of the script above is used to display the fixed text that will appear on the label.
^XZ
^XA
^XFZB_PAC-EMN.ZPL
FN999FD&T005T-LAND1&^FS
FN998FD&VBPLA-VBELN&^FS
FN997FD&V_PACKAGE&^FS
FN996FD&VEKP-EXIDV&^FS
FN995FD&V_SERIAL_BAR&^FS
FN994FD&V_SERIAL&^FS
IF &WA_ZZE46SERIAL-ZPRINT& = 'X'
FN993FD&V_TEXT&^FS
ENDIF
^PQ1,0,1,N
^XZ
^FX End of job
The second part above contains the actual data that will be printed on the label. T005T-Land1 will print the country code. VBPLA-VBELN will print the Sales Document No. etc. This data comes from your print program.
Hope this info helps.
Reward points if useful.
Thanks

Please explain Sh.Text type i.e. BzWe, BzRe, RE-L

Similar Messages

Maybe you are looking for