SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5

hi experts,
I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
========================================================================
OCS package SAPK-360COINTDAGBCA does not match the current software component vector
========================================================================
any idea pleas...
For reference
==========================
tp version : 720 patch 90
R3trans version : 720 patch 89
SPAM/SAINT : 7.02/43
SAP_BASIS : 702 sp 07
SAP/EA_APPL : 605 sp 04
Thanks and regards,
Jun

Hi Jun,
You could check the upgrade logs and traces at the location ../usr/sap/<sid>/upg/abap/logs.
Check for the latest last changed logs. Mos probably a prerequisite package for the REACH 2.0 installation is not included in the upgrade. The detailed logs should mention which prerequisite is missing.
Fore reference see thread: EHP4 upgrade error on SAPK-603DHINEAPS
Regards,
Srikishan

Similar Messages

SAP Product and Portfolio Management Upgrade(PPM)

HI Everyone, A warm reagrds! W e are planning to upgrade our current SAP Product and Portfolio Management 4.0 to 5.0.While doing the Upgrade analysis I have come across below these questions..Has anyone earlier in this forum have come across
1.What are the side effects of this upgrade on existing system?
2. We have 21 client environment on top of the 3 standard clients provided by SAP. What can be the best approach for upgrading the systems? Some of these clients are used by project teams for prototype development , how would the upgrade affect their working (they are not working on this package)?
3. Our team is working on this package in one of the client and have created scenarios in the system. What will be the effect of this upgrade ? (this question can be seen as an extension to question 1)
4. How much effort would be required to carry out this upgrade and what will be the down time for the system?
I have check the service market place and help.sap but at present not getting much info..
Thanks for your time to read.. Please help!1

Hi,
it is an own separate NW AddOn, see SAP Note 1377104 (FAQs - SAP Portfolio and Project Management 5.0).
Kind regards,
Florian

Hi i added a few sofware products and hence components do we need to add ..

hi i added a few sofware products and hence components do we need to add these
to the technical and business system

Yes add them. How ever, if you do not add them you will not get any error. But while editing the condition editor in Receiver agreement or Interface Determination, you will not get the source msg structure.
So it is better to add them.
Regards,
Jai Shankar

Licensing Light room. I bought the product and downloaded Lightroom as i do not have a disc drive. Serial number om box not accepted. Mac-user, latest version!

I bought the product and downloaded Lightroom as i do not have a disc drive. Serial number om box not accepted. Mac-user, latest version!
Olof Molinder, Stockholm

Serial number and activation support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Serial number is valid but can't find qualifying product, and the drop down list does not include my

Serial number is valid but the qualifying product is not found on computer and I ordered and downloaded Adobe Acrobat XI Pro and it is not on dropdown list

Donnacat69 wrote:
Serial number is valid but the qualifying product is not found on computer and I ordered and downloaded Adobe Acrobat XI Pro and it is not on dropdown list
It seems as if you have purchased the upgrade version of Acrobat 11.
The Enter Serial Number Upgrade screen accepts only the serial number of a previous version of the product that you are currently installing.
If in case you do not have any previous version of Acrobat then it will be considered as incorrect purchase. You should have purchased a full version of Acrobat.
Thanks!

Reach 2.0 does not match preriquisite in SAINT on SAP ECC 6.0 EHP5

hi experts,
I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
========================================================================
OCS package SAPK-360COINTDAGBCA does not match the current software component vector
========================================================================
any idea pleas...
For reference
==========================
tp version : 720 patch 90
R3trans version : 720 patch 89
SPAM/SAINT : 7.02/43
SAP_BASIS : 702 sp 07
SAP/EA_APPL : 605 sp 04
Thanks and regards,
Jun

Hello Lee
may be OSS Note 1386600 might help. No further idea so far.
With best regards
C.B.

SAP third party Pre-delivered SLD Content - Product and SWCVs

Hi All,
I have started this thread on LinkedIn and I wanted it to be viewed by all of you for your valuable suggestions and thus from SAP too... The thread is [here|http://www.linkedin.com/groupAnswers? viewQuestionAndAnswers=&discussionID=20482912&gid=81282&commentID=16700717&trk=view_disc ]
VJ
Edited by: VijayaShankar Konam on May 22, 2010 12:12 PM

Here is the thread content until now -
Hi All,
I have been working on integration of our product with SAP. We wanted our SLD objects for the product and the swcs to be delivered as part of SAP's pre-delivered SLD content, so that the client could simply import our design objects in to their PI landscape (Similar to how SAP provides PI content on service market place. We do have partnership with SAP and this product integration was not yet certified by SAP. However, they SAP agreed to supply our product and SWCs as part of the standard SAP CIM modal content).
How ever, even when we gave our SLD export to SAP, when the latest CIM modal for SLD from SAP got released, we were surprised to see that, our product and SWCvs are created with the vendor name "sap.com". This absolutely makes our product and swcvs unusable as we would not be able to look at them in the SPROXY on application systems. This was the same case with an older client that I worked with too..!! Any one had similar experience with this? Shouldn't SAP
be creating them with vendor as "<vendor>.com"? At least, our product is not owned by SAP..!!
We all know that, if sap.com is the vendor for SLD objects, only SAP could provide the proxy implementations through an SAP support pack.
Could someone from SAP PI Techies understand my point and care to respond?
Regards,
VJ

How do I know if I can install a JAVA component on a SAP product ?

Dear SAP,
I have a generic question.
I need to know if a JAVA Component can be installed in a system.
Let's take an example :
==> There is EP Core Java Component.
==> My question : May I install this JAVA Software Component EP Core in a SAP SRM 7.0 / NW 7.01 system ?
I know there is http://service.sap.com/scl link which explain the content of each SAP Product and SAP Software Component.
But how do I know if a specifif JAVA Component (example EP Core, SAP MDM Server, ...) can be installed on each SAP AS-JAVA ?
Best regards
CP2009

Dear CP2009
This information is stated in guides but a quick trick can be the following
Go to [https://service.sap.com/sp-stacks] and click on "sp stack download" in the left pane menu.
Then select your product version on right pane for example SP Stack SAP SRM 7.0
This will open a popup window
Fill in start stack and target stack (can be whatever in this case, it's just to check what usage types are available)
On one of the next screen you will have to choose which usage types are installed.
From that screen I can derive that for product "Portal Content SRM" or "SRM Supplier Java" you need component EP Core.
Kind regards
Tom

Difference between SAP SLD and SAP Management console

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shailik

Hi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy.

Do i need any SAP product

Hi All,
I need some help to develop a SAP interface that can make communicate between SAP application and our application. I am pretty new to SAP. I have installed PDK and Sneak Preview SAP NetWeaver 2004. I dont have any other SAP product on my system.
Do I require any SAP product or SAP membership to perform these tasks or is it part of SAP NetWeaver 2004? Where from I can start if I m not SAP customer or partner?
Regards,

hi,
First you should become a SAP customer and implementation of SAP will be done. Only then SAP products can be used. However, it is not possible for you to download any SAP product and start using it immediately.
Regards,
Karthik
Note: Pls award me pts if useful

SAP Product aprears twice in SPRO -Cross-application components

Hi
Can you anyone tell me why do we have two blocks with same name (SAP Product) at same place in SPRO.
Path SPRO - Cross-application components - SAP Product and same name is appearing below SAP Product. When I check other contents of it they are also same.
Why do we have this same setting twice in SRM SPRO ?
Regards
Nitin

Hi,
you can also access this IMG from the transaction SIMGH.
Check if the correct SAP Reference IMG is being displayed.
Else contact your system administrators.
if useful, reward points
Regards,
Revathi

SAP Recepits and Issue Qty

Hi,
what you mean by Receipt qty and Issued qty in SAP.Explain and Advise Me.
Regards,
Jeevan.S

You can check detail in SAP help :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2ba31643ad11d189410000e829fbbd/frameset.htm
Goods Receipt   Locate the document in its SAP Library structure
Purpose
You use this component to post the receipt of goods from an external vendor or from production. A goods receipt leads to an increase in warehouse stock.
Features
The system distinguishes between the following types of goods receipt:
●     Goods receipts with reference to a reservation
●     Goods receipts with reference to an order
●     Other goods receipts
Goods Issue   Locate the document in its SAP Library structure
Purpose
Using this component, you can post a material withdrawal, a material issue, or a shipment of goods to a customer (without the involvement of the SD Shipping component). A goods issue leads to a reduction in warehouse stock.
Features
The Inventory Management system supports the following types of goods issues:
Withdrawal of material for production orders
Scrapping and withdrawal of material for sampling
Return deliveries to vendors
Other types of internal staging of material
Deliveries to vendors without the involvement of the SD Shipping component

Is this possible: SNC connection from SAP GUI to SAP Router, and ...

Hi,
I have (stupid perhaps) question.
Is this scenario possible:
SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
I know how to set up scenario like this:
SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
Best regards,
Marek Majchrowski

Wolfgang,
To be sure myself and Marek understand, can you confirm the different scenarios supported:
Scenario 1:
SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
Scenario 2:
SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
SAP GUI -- (SNC conn) -- SAP System
Scenario 3:
This is the scenario mentioned by Marek in his initial question:
SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
Thanks,
Tim
Edited by: Tim Alsop on Feb 25, 2008 5:24 PM

Diff b/w SAP LUW and DB LUW?

2. what is the diff b/w SAP LUW and DB LUW?

Database LUW : <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/7af4bca79e11d1950f0000e82de14a/frameset.htm">LInk</a>
Sap LUW : <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/7af4bca79e11d1950f0000e82de14a/frameset.htm">Link</a>
Thanks
Mahesh

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5

Similar Messages

Maybe you are looking for