Please Fix This Bug - Mac Version CS4

Mac OS 10.6.3 (bug has been around a while)
Mac Pro
Flash CS4 10.0.2.566
Open up Flash using the Designer workspace (it can be any workspace, though).
Now select Import so the OS X file dialog appears. Drag the dialog to be longer vertically so you can see more files listed. Select Cancel.
Now drag the divider between the timeline and the stage down to be bigger vertically so you can see more Layers in the timeline.
Now select Import and watch the file dialog spawn from the top of the stage, move down, hit the bottom of the screen, and shift your entire workspace. This is a bug. It shouldn't do this. Try fixing this weird anomaly at the top of your screen where it's a gap in the interface and you can't see the top part of the workspace.
How long has Flash been out and this bug still exists?
Steve Jobs was right. Adobe is lazy, though Apple's own Final Cut Studio has its share of ignored bugs, so he has no room to talk.
I suppose I'm going to have to buy CS5 to get a bug fix...or it will carry over. I remember when Macromedia was around creating competition. The consumer benefited from that competition.

Have you reported this bug? Based on the series of steps you need to create this scenario, it is possible no one else has encountered it, so it may not have been addressed at all. It probably has nothing at all to do with laziness on Adobe's end, though they are unlikely to release a new version every time a newly discovered bug gets arises.
suggestions to Adobe - Wishlist
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

I only use Image Capture, so I can't speak for other software.
Here is how I select a Scan To destination:
If you are using the minimal details screen, you should have the same submenu to the left of the page size.

TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy

My iPad orientation is not working after the IOS 8 update. Please fix this bug!

my iPad air orientation is not working after the IOS8 update. Can you fix this bug? Thx

Did you try a reset?
Restart / Reset
http://support.apple.com/kb/HT1430

ATTENTION APPLE - PLEASE FIX THIS BUG !!!

I know Apple knows of the issue when working with 720p 24p material generated from a HVX200 camera. For instance if I add a title over the media then render ... it jumps my original material 1-3 frames ahead. Its worse when you add a cross dissolve .... it jumps 2-3 frames in resulting in a "hick-up" effect. I guess people have found a work around by re-importing everything and I guess re-cutting stuff but this should'nt be the solution. The SOLUTION should be that Apple fixes this issue ASAP! No?

That is the exact solution I gave you over the phone. They did a few things differently (and I find better, as a matter of fact) but in essence it is what I adviced you to do.
This is the learning curve. This is why you never EVER update mid project. This is a lesson. One that you will never forget. I can't tell you how many times something has happened during an upgrade that caused problems...so often that everywhere I work people won't do anything until projects are done. Unless they need to upgrade to fix something, and if that fixes it but causes a new problem, then you have to deal with it and put in man hours to fix it.
And no, you cannot bill Apple. If Avid was hit with the hours of pain and reworking it caused, it would have gone out of business long ago.
And this is a case of "take responsibility for you actions." You chose to upgrade mid project, even though we have advised against it numerous times on this board in hundreds of threads...and on other FCP boards as well. Just because you didn't know not to, doesn't make Apple liable for your mistake. It was a mistake...and one you have to fix. This happens. Mistakes happen all the time, and I have made my fair share of doozies. But I don't blame Avid or Apple for them. I may yell and scream at them, but it was my mistake for not knowing that what I did was what I wasn't supposed to do.
Sorry man. Long days ahead of you.
Shane
Elitist

Apple, please fix this bug

Playing a music video as a song, (no video) the sound breaks exactly every 2 minutes for about a sec and a half and continues for another 2 minutes. Doesn't matter what firmware is installed.
This is very disapointing.
(The same file, played as a video, not a song, works flawlessly with no interruptions.)
AMD 2.4 Ghz Windows XP Pro 1 Gb Ram Ipod 5g Black 60 Gb

To save power. To avoid duplicates of music videos and similiar audios. On version 1.0, you can turn off the backlight for videos, not anymore for 1.1.
I found that is drop out period varies depending what s/w and rate the video was used.
It definitely be nice to get that working.
Al

Firefox tabs close when I click on a tab and windows become unresponsive after I launch a site. Using latest version for MacOSX. How do I fix this bug? Have already tried a bunch of things.

Firefox tabs close when I simply click on a tab and windows become unresponsive after I launch a site. I am using the latest version for MacOSX but this happened a couple days ago with an older version of Firefox as well. Is this some kind of bug? How do I fix this bug? Have already tried a bunch of things like clearing/reinstalling etc. This does not help.
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

You can middle click a link to open that link in a new tab.
*Open Link in New Tab: https://addons.mozilla.org/firefox/addon/open-link-in-new-tab/
*Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/tab-utilities-lite/

Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser

Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

HT201272 Eversince I updated the Bejeweled Blitz on my 3G iPod, The game kept crashing so I deleted & re-installed the app, now I cannot play this game on my ipod anymore as the new version is made for 4G ISO! Please fix this & make it compatible with all

Ever since I updated the Bejeweled Blitz on my 3G iPod, The game kept crashing so I deleted & re-installed it.
Sadly, I now can't play the game on my iPod anymore because new version is compatible with the 4G & iSo or higher only.
What should I do to get my purchased game back?
Please fix this problem ASAP!
Thank you.

Have you:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If a PC
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

When your search tab is on you can't highlight or add note etc to the pdf. While this was possible in previous version. Please fix this, it's very annoying [iOS]

When your search tab is on you can't highlight or add note etc to the pdf. While this was possible in previous version. Please fix this, it's very annoying

Hi,
Acrobat PDF reader for iOS.
Thanks,

Photos that have been deleted to aperture trash cannot be viewed. Any assistance is welcome in fixing this bug. The showing all files option is selected in the filter. System is 10.8.4, aperture version 3.4.5

Photos that have been deleted to aperture trash cannot be viewed. Any assistance is welcome in fixing this bug. The showing all files option is selected in the filter. System is 10.8.4. Aperture version 3.4.5. Used to be able to view the files then all of a sudden they have stop appearing. Once the aperture trash is emptied the files can be viewed in the system trash. Becomes quite annoying if you want to review the aperture trash files before deletion.

Photos that have been deleted to aperture trash cannot be viewed ...
The showing all files option is selected in the filter.
Cookiemonster, previously Frank Caggiano's magic helped in this situation - have you tried the double, double Caggiano as described here?
Images not appearing in browser, search filter is cleared
https://discussions.apple.com/docs/DOC-3062
In the most recent version I cannot get this trick to work, however. But try it anyway, maybe it is just my macthat has an issue.
Did this happen directly after the update? Where is your library located, on an external or an internal drive? Are your originals managed or referenced?
I'd try next to check, if this is caused by the library, by creating a small test library and trying to trash pictures there. If it works well in a new library try to repair the database and the permissions on your regular library. See:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=27%26se ction=10%26tasks=true
Regards
Léonie

Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug . iPhone 5, iOS 7.0.4

Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug .
iPhone 5, iOS 7.0.4

Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

Please, Fix this I think its a BUG

I'm using iPhone 3gs
I have problem with my volume slider. It works fine for, like 7 to 6 hours. Then, the problem of volume slider started to occur. Every time I adjust the volume slider it slides back to where it was. Here is a good example of a guy who has the same problem. http://www.youtube.com/watch?v=ajsMXBo5fXM Please, take a look at 1:54 min.
I have the way to fix the problem, though, is to restart iPhone. but I dont want to restart my iPhone everytime this problem occur
I don't know whether its the hardware or software problem, but PLEASE fix this or gimme the solution.
By the way, it happens with both FW3.0.1 and 3.1
I thought upgrading the FW would help but its not!
Thank you for ur kind answer.
PS. Is there anyone who has the same problem as mine??? How do u solve it??

I am having this same type of problem which I have posted in here already.
http://discussions.apple.com/thread.jspa?threadID=2085835&tstart=0
My problem is when I am using my phone hooked up through the headphones in my car, every now and then the volume will slide on its own either all the way up or all the way down and the volume picture will be stuck on. The only way to stop this is to turn the phone off and then back on. It doesn't happen all the time and I guess I am too lazy to call Apple or go to a store and my question still has not been answered on this forum. Up until now I have not heard anyone else having this problem and yours is very close to what I am experiencing but at the same time different. I will try the resetting of my phone to see if that works. Thanks for your post.

Flicker footage in Premiere Pro CC 2014.2. Tested on different computers. When waiting for fixes this bug?

Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different. Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
It can occur even in the parts without filters !!! But no all time.
ver 2014.2 - win 7 - intel i7-4770 - gtx 770 - flicker!
ver 2014.2 - win 7 - intel i7-4770 - Intel HD Graphics 4600 - flicker!
ver 2014.2 - win 7 - intel i7-2700K - quadro 2000 - flicker!
MERCURY PLAYBACK ENGINE work fine! But still flickering in preview and render.
When waiting for fixes this bug?

Hi Aleksey,
Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different.
Have you tried with the Mercury Playback Engine set to "Software Only?" More info please: FAQ: What information should I provide when asking a question on this forum?
Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
Is this a brand new project or one you updated from an earlier version? What kind of footage are you exporting? Which preset are you using?
When waiting for fixes this bug?
If I can repeat the case here with the same hardware, GPU, and drivers, that would be easier to fix the bug. Currently, I cannot recreate the bug. If you or anyone else can provide me with steps to recreate the bug, that would help immensely. It sounds like this will be the difficult thing.
Thanks,
Kevin

Adobe: Please reopen this bug SDK-30917

Currently in Flex 4.5.1 if you set the VideoDisplay source over and over, each time the memory usage of the runtime (e.g. ADL.exe) increases. After a while the memory usage drops to about 50MB or so and starts increasing again. However, this time when the memory drops, the runtime stops responding. Other people have confirmed this behaviour.
Bill has provided some links to other tickets regarding the same issue, one of which I reported ages ago. The fix suggested here is to set the VideoDisplay source to null before setting the source to something else. This should free up memory. However the "null" workaround that used to work no longer works.
Can you reopen this ticket please and let me know what's happening about fixing this bug?
https://bugs.adobe.com/jira/browse/SDK-30917

I am having exactly the same issue. Here is simple test case:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication creationComplete="creationComplete(event)" xmlns:fx="http://ns.adobe.com/mxml/2009"
                                                     xmlns:s="library://ns.adobe.com/flex/spark"
                                                     xmlns:mx="library://ns.adobe.com/flex/mx">
          <fx:Script>
                    <![CDATA[
                              import mx.events.FlexEvent;
                              protected function creationComplete(event:FlexEvent):void
                                        var timer:Timer = new Timer(1000);
                                        timer.addEventListener(TimerEvent.TIMER, onTimer);
                                        timer.start();
                              private function onTimer(event:Event):void
                                        videoDisplay.source = null;
                                        videoDisplay.source = "file:///D:\\test.flv";
                    ]]>
          </fx:Script>
          <s:VideoDisplay id="videoDisplay"/>
</s:WindowedApplication>
The only workaround which works for me is to call System.gc() in the onTimer function. So it seems like for some reason garbage collector can't determine automatically that app runs out of memory.
Best Regards, Aleksey

Please Fix This Bug - Mac Version CS4

Similar Messages

Maybe you are looking for